1. |
- Abelev, Betty, et al.
(author)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
In: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Journal article (peer-reviewed)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
2. |
- Sarwar, Nadeem, et al.
(author)
-
Interleukin-6 receptor pathways in coronary heart disease : a collaborative meta-analysis of 82 studies
- 2012
-
In: The Lancet. - New York, NY, USA : Elsevier. - 0140-6736 .- 1474-547X. ; 379:9822, s. 1205-1213
-
Journal article (peer-reviewed)abstract
- Background: Persistent inflammation has been proposed to contribute to various stages in the pathogenesis of cardiovascular disease. Interleukin-6 receptor (IL6R) signalling propagates downstream inflammation cascades. To assess whether this pathway is causally relevant to coronary heart disease, we studied a functional genetic variant known to affect IL6R signalling. Methods: In a collaborative meta-analysis, we studied Asp358Ala (rs2228145) in IL6R in relation to a panel of conventional risk factors and inflammation biomarkers in 125 222 participants. We also compared the frequency of Asp358Ala in 51 441 patients with coronary heart disease and in 136 226 controls. To gain insight into possible mechanisms, we assessed Asp358Ala in relation to localised gene expression and to postlipopolysaccharide stimulation of interleukin 6. Findings: The minor allele frequency of Asp358Ala was 39%. Asp358Ala was not associated with lipid concentrations, blood pressure, adiposity, dysglycaemia, or smoking (p value for association per minor allele >= 0.04 for each). By contrast, for every copy of 358Ala inherited, mean concentration of IL6R increased by 34.3% (95% CI 30.4-38.2) and of interleukin 6 by 14.6% (10.7-18.4), and mean concentration of C-reactive protein was reduced by 7.5% (5.9-9.1) and of fibrinogen by 1.0% (0.7-1.3). For every copy of 358Ala inherited, risk of coronary heart disease was reduced by 3.4% (1.8-5.0). Asp358Ala was not related to IL6R mRNA levels or interleukin-6 production in monocytes. Interpretation: Large-scale human genetic and biomarker data are consistent with a causal association between IL6R-related pathways and coronary heart disease.
|
|
3. |
- Zheng, Hou-Feng, et al.
(author)
-
Whole-genome sequencing identifies EN1 as a determinant of bone density and fracture
- 2015
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 526:7571, s. 112-
-
Journal article (peer-reviewed)abstract
- The extent to which low-frequency (minor allele frequency (MAF) between 1-5%) and rare (MAF <= 1%) variants contribute to complex traits and disease in the general population is mainly unknown. Bone mineral density (BMD) is highly heritable, a major predictor of osteoporotic fractures, and has been previously associated with common genetic variants(1-8), as well as rare, population specific, coding variants(9). Here we identify novel non-coding genetic variants with large effects on BMD (n(total) = 53,236) and fracture (n(total) = 508,253) in individuals of European ancestry from the general population. Associations for BMD were derived from whole-genome sequencing (n = 2,882 from UK10K (ref. 10); a population-based genome sequencing consortium), whole-exome sequencing (n = 3,549), deep imputation of genotyped samples using a combined UK10K/1000 Genomes reference panel (n = 26,534), and de novo replication genotyping (n = 20,271). We identified a low-frequency non-coding variant near a novel locus, EN1, with an effect size fourfold larger than the mean of previously reported common variants for lumbar spine BMD8 (rs11692564(T), MAF51.6%, replication effect size510.20 s.d., P-meta = 2 x 10(-14)), which was also associated with a decreased risk of fracture (odds ratio = 0.85; P = 2 x 10(-11); ncases = 98,742 and ncontrols = 409,511). Using an En1cre/flox mouse model, we observed that conditional loss of En1 results in low bone mass, probably as a consequence of high bone turnover. We also identified a novel low frequency non-coding variant with large effects on BMD near WNT16 (rs148771817(T), MAF = 1.2%, replication effect size +10.41 s.d., P-meta = 1 x 10(-11)). In general, there was an excess of association signals arising from deleterious coding and conserved non-coding variants. These findings provide evidence that low-frequency non-coding variants have large effects on BMD and fracture, thereby providing rationale for whole-genome sequencing and improved imputation reference panels to study the genetic architecture of complex traits and disease in the general population.
|
|
4. |
- Estrada, Karol, et al.
(author)
-
Genome-wide meta-analysis identifies 56 bone mineral density loci and reveals 14 loci associated with risk of fracture.
- 2012
-
In: Nature genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 44:5, s. 491-501
-
Journal article (peer-reviewed)abstract
- Bone mineral density (BMD) is the most widely used predictor of fracture risk. We performed the largest meta-analysis to date on lumbar spine and femoral neck BMD, including 17 genome-wide association studies and 32,961 individuals of European and east Asian ancestry. We tested the top BMD-associated markers for replication in 50,933 independent subjects and for association with risk of low-trauma fracture in 31,016 individuals with a history of fracture (cases) and 102,444 controls. We identified 56 loci (32 new) associated with BMD at genome-wide significance (P < 5 × 10(-8)). Several of these factors cluster within the RANK-RANKL-OPG, mesenchymal stem cell differentiation, endochondral ossification and Wnt signaling pathways. However, we also discovered loci that were localized to genes not known to have a role in bone biology. Fourteen BMD-associated loci were also associated with fracture risk (P < 5 × 10(-4), Bonferroni corrected), of which six reached P < 5 × 10(-8), including at 18p11.21 (FAM210A), 7q21.3 (SLC25A13), 11q13.2 (LRP5), 4q22.1 (MEPE), 2p16.2 (SPTBN1) and 10q21.1 (DKK1). These findings shed light on the genetic architecture and pathophysiological mechanisms underlying BMD variation and fracture susceptibility.
|
|
5. |
|
|
6. |
|
|
7. |
- Bourennane, Mohamed, et al.
(author)
-
Experimental long wavelength quantum cryptography: from single-photon transmission to key extraction protocols
- 2000
-
In: Journal of Modern Optics. - : Informa UK Limited. - 0950-0340 .- 1362-3044. ; 47, s. 563-579
-
Journal article (peer-reviewed)abstract
- We present experiments on long wavelength (λ = 1.55 μm) 'plug and play' quantum cryptography systems. We discuss the performance of single-photon detectors at λ = 1.55 μm. Furthermore, we address the full implementation of the quantum cryptography protocol, discussing in detail the implementation of protocols for error correction and privacy amplification needed to get a secure key. We illustrate the theory with examples from a full software simulation to show the performance of the complete protocol in terms of final secure key creation rate
|
|
8. |
- Böckin, Daniel, 1989, et al.
(author)
-
How product characteristics can guide measures for resource efficiency - A synthesis of assessment studies
- 2020
-
In: Resources, Conservation and Recycling. - : Elsevier BV. - 0921-3449 .- 1879-0658. ; 154
-
Journal article (peer-reviewed)abstract
- A circular economy aims at decoupling value creation from resource throughput. For circular economy to contribute to environmental and resource improvements, there is need for critical assessments regarding in what general situations, beyond individual cases, solutions may lead to improvements. On the product-level, there is need for synthesized knowledge accounting for a wide range of contexts and environmental impacts. We investigate what resource efficiency (RE) measures result in reduced physical flows and environmental impacts, depending on the characteristics of products and their life cycles. The study is limited to physical measures on a product system level, irrespective of manner of implementation. A library of comparative assessments (primarily life cycle assessments and material flow analyses) was built, covering a wide range of products and RE measures. A framework was formulated for analysing for which product characteristics a measure tends to improve RE, and under which contexts there are trade-offs to take into account. For example, sharing of products is best suited for durable and infrequently used products that tend not to reach their full technical lifetime. A trade-off is that sharing can increase transportation for accessing shared stock. The identified key product characteristics were: whether products are consumable or durable, active or passive, typically used for their full technical lifetimes or discarded before being worn out, the product’s frequency of use and whether function remains at a product’s end of use. Pace of development matters for suitability of measures for active, durable products, while complexity is relevant for restorative measures and recycling.
|
|
9. |
- Böckin, Daniel, 1989, et al.
(author)
-
What makes solutions within the manufacturing industry resource efficient?
- 2016
-
In: Presented at the 12th Biennial International Conference on EcoBalance, in Kyoto, Japan, 3-6th October 2016..
-
Conference paper (other academic/artistic)abstract
- The linear mode of production and consumption has dominated the last century. Raw materials are extracted and assembled into products that are discarded after only a short life. This entails a net flow of material from the earth’s crust into diluted stocks spread over society and in nature. To achieve long term sustainability, a move towards a resource efficient (RE) economy needs to take place.Such resource efficiency can be achieved in an abundance of ways that relate to production efficiency (e.g. reducing scrap rate), more efficient use of product (e.g. sharing, prolong life, energy efficiency) or closing the loops (reverting material flows back into the product-chain). But, from a life-cycle perspective, how effective are resource efficient solutions in actuality? There is a lack of generic understanding of when a RE solution in fact leads to a net improvement in resource efficiency, and under which conditions (such as product characteristics, enablers etc.) that they are successful.A related paper presents an analytical framework that aims at analysing and understanding RE solutions. The present work presents a pilot study which, using this framework, systematically analyses a number of different assessment studies (e.g. Life Cycle Assessments, Lice Cycle Costings, Material Flow Analyses) and thus provides an overview and an understanding of which different solutions are suitable under different sets of conditions or product types. The selection of case studies is limited to RE solutions within the manufacturing industry such as remanufacturing of engines, functional sales of washing machines and reuse of electronic equipment.The study is expected to contribute to a generic understanding of what characterises RE solutions and the trade-offs they bring, thus clarifying what makes different solutions effective and not. Furthermore, this knowledge can be utilised as guidelines when planning or designing new solutions to be RE.
|
|
10. |
- Carlzon, Daniel, et al.
(author)
-
Both Low and High Serum IGF-1 Levels Associate With Increased Risk of Cardiovascular Events in Elderly Men
- 2014
-
In: Journal of Clinical Endocrinology and Metabolism. - : The Endocrine Society. - 1945-7197 .- 0021-972X. ; 99:11, s. 2308-2316
-
Journal article (peer-reviewed)abstract
- Context: Most previous prospective studies suggest that low serum IGF-1 associates with increased risk of cardiovascular disease (CVD) events whereas other studies suggest that high serum IGF-1 associates with increased risk of CVD events. Objective: We tested the hypothesis that not only low, but also high serum IGF-1 levels associate with increased risk of CVD events in elderly men. Setting and Design: Serum IGF-1 levels were measured in 2901 elderly men (age 69-81 years) included in the Swedish cohort of the prospective, population-based Osteoporotic Fractures in Men Study (MrOS), Sweden cohort. Data for CVD events were obtained from national Swedish registers with no loss of followup. Results: During followup (median, 5.1 y) 589 participants experienced a CVD event. The association between serum IGF-1 and risk of CVD events was nonlinear, and restricted cubic spline Cox regression analysis revealed a U-shaped association between serum IGF-1 levels and CVD events (P < .01 for nonlinearity). Low as well as high serum IGF-1 (quintile 1 or 5 vs quintiles 2-4) significantly associated with increased risk for CVD events (hazard ratio [HR] = 1.25, 95% confidence interval, [CI], 1.02-1.54; and HR = 1.35, 95% CI 1.10-1.66, respectively). These associations remained after adjustment for prevalent CVD and multiple risk factors. High serum IGF-1 associated with increased risk of coronary heart disease (CHD) events but not with risk of cerebrovascular events. Conclusions: Both low and high serum IGF-1 levels are risk markers for CVD events in elderly men. The association between high serum IGF-1 and CVD events is mainly driven by CHD events.
|
|