1. |
- Carraminana, Albert, et al.
(author)
-
Rationale and Study Design for an Individualized Perioperative Open Lung Ventilatory Strategy in Patients on One-Lung Ventilation (iPROVE-OLV)
- 2019
-
In: Journal of Cardiothoracic and Vascular Anesthesia. - : W B SAUNDERS CO-ELSEVIER INC. - 1053-0770 .- 1532-8422. ; 33:9, s. 2492-2502
-
Journal article (peer-reviewed)abstract
- Objective: The aim of this clinical trial is to examine whether it is possible to reduce postoperative complications using an individualized perioperative ventilatory strategy versus using a standard lung-protective ventilation strategy in patients scheduled for thoracic surgery requiring one-lung ventilation. Design: International, multicenter, prospective, randomized controlled clinical trial. Setting: A network of university hospitals. Participants: The study comprises 1,380 patients scheduled for thoracic surgery. Interventions: The individualized group will receive intraoperative recruitment maneuvers followed by individualized positive end-expiratory pressure (open lung approach) during the intraoperative period plus postoperative ventilatory support with high-flow nasal cannula, whereas the control group will be managed with conventional lung-protective ventilation. Measurements and Main Results: Individual and total number of postoperative complications, including atelectasis, pneumothorax, pleural effusion, pneumonia, acute lung injury; unplanned readmission and reintubation; length of stay and death in the critical care unit and in the hospital will be analyzed for both groups. The authors hypothesize that the intraoperative application of an open lung approach followed by an individual indication of high-flow nasal cannula in the postoperative period will reduce pulmonary complications and length of hospital stay in high-risk surgical patients. (C) 2019 Published by Elsevier Inc.
|
|
2. |
- Fontes-Candia, Cynthia, et al.
(author)
-
Maximizing the oil content in polysaccharide-based emulsion gels for the development of tissue mimicking phantoms
- 2021
-
In: Carbohydrate Polymers. - : Elsevier Ltd. - 0144-8617 .- 1879-1344. ; 256
-
Journal article (peer-reviewed)abstract
- Formulations based on agar and κ-carrageenan were investigated for the production of emulsion gels applicable as tissue mimicking phantoms. The effects of the polysaccharide matrix, the oil content and the presence of surfactants on the micro-/nanostructure, rheology, and mechanical and dielectric properties were investigated. Results showed a high capacity of the agar to stabilize oil droplets, producing gels with smaller (10−21 μm) and more uniform oil droplets. The addition of surfactants allowed increasing the oil content and reduced the gel strength and stiffness down to 57 % and 34 %, respectively. The permittivity and conductivity of the gels were reduced by increasing the oil content, especially in the agar gels (18.8 and 0.05 S/m, respectively), producing materials with dielectric properties similar to those of low-water content tissues. These results evidence the suitability of these polysaccharides to design a variety of tissue mimicking phantoms with a broad range of mechanical and dielectric properties.
|
|
3. |
- Fontes-Candia, Cynthia, et al.
(author)
-
Rheological and structural characterization of carrageenan emulsion gels
- 2020
-
In: Algal Research. - : Elsevier B.V.. - 2211-9264. ; 47
-
Journal article (peer-reviewed)abstract
- Carrageenan emulsion gels containing sunflower oil were prepared using three different commercial carrageenan grades (κ-C, ι-C and λ-C). The effect of the carrageenan and salt content, as well as the oil:water ratio, on the emulsion gel strength was evaluated through a response surface methodology. Moreover, the rheological properties and the micro- and nanostructure from the stronger emulsion gel formulations were investigated and compared to their analogous hydrogel formulations. Interestingly, emulsion gels formed stronger and more thermally stable networks than the hydrogels, being this effect more evident in ι-C and λ-C. The results indicate that this was mainly due to a polysaccharide concentration effect, as no evidence of interactions between the carrageenan and the oil phase was found. Consequently, the rheological behaviour of the emulsion gels was mostly determined by the type of carrageenan. The association of carrageenan molecular chains was favoured in κ-C and λ-C (due to the presence of κ-carrageenan in the latter) and promoted by the addition of KCl. In contrast, a lower degree of chain association, mostly driven by ionic cross-linking, took place in ι-C. These results evidence the relevance of the gelation mechanism on the properties of emulsion gels and provide the basis for the design of these systems for targeted applications within the food industry.
|
|
4. |
- Martinez-Sanz, Marta, et al.
(author)
-
Advanced structural characterisation of agar-based hydrogels : Rheological and small angle scattering studies
- 2020
-
In: Carbohydrate Polymers. - : Elsevier BV. - 0144-8617 .- 1879-1344. ; 236
-
Journal article (peer-reviewed)abstract
- Agar-based extracts from Gelidium sesquipedale were generated by heat and combined heat-sonication, with and without the application of alkali pre-treatment. Pre-treatment yielded extracts with greater agar contents; however, it produced partial degradation of the agar, reducing its molecular weight. Sonication produced extracts with lower agar contents and decreased molecular weights. A gelation mechanism is proposed based on the rheological and small angle scattering characterization of the extracts. The formation of strong hydrogels upon cooling was caused by the association of agarose chains into double helices and bundles, the sizes of which depended on the agar purity and molecular weight. These different arrangements at the molecular scale consequently affected the mechanical performance of the obtained hydrogels. Heating of the hydrogels produced a gradual disruption of the bundles; weaker or smaller bundles were formed upon subsequent cooling, suggesting that the process was not completely reversible.
|
|
5. |
- Martínez-Sanz, Marta, et al.
(author)
-
Composition and rheological properties of microalgae suspensions : Impact of ultrasound processing
- 2020
-
In: Algal Research. - : Elsevier B.V.. - 2211-9264. ; 49
-
Journal article (peer-reviewed)abstract
- In this study the rheological properties of aqueous suspensions of three microalgae species, Nannochloropsis gaditana, Scenedesmus almeriensis and Spirulina platensis, were investigated as a function of solids content, and related to their composition and microstructure. In addition, the impact of ultrasound processing on their structuring ability was also studied. The less rigid character of the Spirulina platensis cell walls (with very low carbohydrate contents) and the presence of extracellular components promoted cell-cell interactions, yielding suspensions which showed a shear thinning behaviour at lower concentrations than Nannochloropsis gaditana and Scenedesmus almeriensis. It is noteworthy that the three species showed different viscoelastic properties at 25 wt.% total solids. Spirulina platensis suspensions showed a more elastic behaviour and lower frequency dependence, characteristic of weak gels, whilst Nannochloropsis gaditana and Scenedesmus almeriensis behaved more like viscous liquids. The ultrasound treatment did not affect the cell wall integrity, but it promoted the release of intracellular components (some of which could have been partially degraded) and disrupted physical interparticle interactions in Nannochloropsis gaditana and Scenedesmus almeriensis. This has an impact on the rheological properties, increasing the viscosity of Nannochloropsis gaditana suspensions, whilst the viscosity of Scenedesmus almeriensis suspensions was reduced. The outcomes of this work give insights into the exploitation of these microalgae species in soft materials for food, pharma and other technological applications.
|
|
6. |
- Martínez-Sanz, Marta, et al.
(author)
-
Nano-/microstructure of extruded Spirulina/starch foams in relation to their textural properties
- 2020
-
In: Food Hydrocolloids. - : Elsevier B.V.. - 0268-005X .- 1873-7137. ; 103
-
Journal article (peer-reviewed)abstract
- This work reports on an in-depth characterization of the nano- and microstructure of extruded starch foams loaded with the microalga Spirulina (1, 5 and 10 wt%), as well as the implications of Spirulina incorporation on the textural properties of the foams. Due to the gelatinization process occurring during extrusion, the crystalline and lamellar structures originally present in the starch granule were disrupted, resulting in very amorphous foams. Moreover, the crystalline structure of the fatty acids present in the raw microalga was lost during processing. The presence of Spirulina intracellular components induced the formation of more thermally-stable V-type crystallites through complexation with amylose, hence producing slightly more crystalline foams (XC~5–9%) than the pure extruded starch (XC ~3%). This affected the microstructure of the hybrid foams, which showed more densely packed and well-connected porous structures. Microstructural changes had an impact on the texture of the foams, which became harder with greater Spirulina loadings. The foams underwent very limited re-crystallization upon storage, which was further reduced by the presence of Spirulina. Interestingly, the free fatty acids from Spirulina re-crystallized and the resistant starch content in the 10% Spirulina foam increased, which could potentially be interesting from a nutritional perspective. These results show the potential of extrusion cooking to produce healthier snack foods and highlight the suitability of advanced characterization tools such as neutron tomography and small angle X-ray scattering to investigate food structure.
|
|
7. |
- Bermejo-López, Aitor, et al.
(author)
-
Selective Synthesis of Imines by Photo-Oxidative Amine Cross-Condensation Catalyzed by PCN-222(Pd)
- 2021
-
In: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 9:43, s. 14405-14415
-
Journal article (peer-reviewed)abstract
- Palladium-metalated PCN-222 enables the aerobic photo-oxidative cross-condensation of anilines with benzylic amines yielding a series of linear and cyclic imines. The reaction is very efficient under mild conditions, which allows the isolation of simple, yet elusive, intermediates such as 2-(benzylideneamino)-aniline and 2-(benzylideneamino)phenols. Recyclability studies show excellent activity and selectivity after five runs. The methodology was successfully applied for the synthesis of an antitumor agent (PMX-610).
|
|
8. |
- Bermejo-López, Aitor, et al.
(author)
-
Selective Synthesis of Imines via Photooxidative AmineCross-Condensation Catalyzed by PCN-222(Pd)
-
Other publication (other academic/artistic)abstract
- Palladium metallated PCN-222 enables the selective cross-condensation of anilines with benzylic aminesunder photooxidative conditions and at ambient temperature. The method affords a series of linear and cyclic Schiffbases. The mild conditions used in this catalytic system results in the isolation of resourceful intermediates such as 2-(benzylideneamino)aniline and 2-(benzylideneamino)phenols, which can be further modified.
|
|
9. |
- Bojorges, Hylenne, et al.
(author)
-
Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction
- 2023
-
In: Carbohydrate Polymers. - : Elsevier BV. - 0144-8617 .- 1879-1344. ; 299
-
Journal article (peer-reviewed)abstract
- The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties.The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchro-tron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples.
|
|
10. |
|
|