1. |
|
|
2. |
|
|
3. |
- Ahlsson, Anders J., et al.
(author)
-
Postoperative atrial fibrillation is not correlated to C-reactive protein
- 2007
-
In: Annals of Thoracic Surgery. - : Elsevier BV. - 0003-4975 .- 1552-6259. ; 83:4, s. 1332-1337
-
Journal article (peer-reviewed)abstract
- BACKGROUND: The peak incidence of postoperative atrial fibrillation (AF) occurs around the second postoperative day, a time at which serum inflammatory markers are elevated. The aim of this study was to investigate differences between patients with and without postoperative AF with special regard to C-reactive protein (CRP) serum levels. METHODS: The study cohort included all heart surgery patients who had sinus rhythm preoperatively, survived postoperative day 3, and were operated on between July 1, 2004, and June 30, 2005 (n = 524). Any episode of AF during the first 7 postoperative days defined the patient as belonging to the postoperative AF group. Creatine kinase-myocardial band (CK-MB) was measured at postoperative day 1, and CRP was measured preoperatively and at postoperative day 3. Risk factors for postoperative AF were determined using bivariate and multivariate regression analysis. RESULTS: Of 524 patients, 182 had at least one episode of AF (34.7%). Preoperative and postoperative CRP concentrations did not differ between the groups (postoperative CRP 175.4 +/- 64.4 versus 175.3 +/- 60.1 mg/L respectively, p = 0.99). Atrial fibrillation patients were significantly older (p < 0.001) and had higher CK-MB levels (33.6 +/- 53.1 microg/L versus 22.5 +/- 26.7 microg/L, respectively, p = 0.009). The odds ratio for postoperative AF with postoperative CK-MB greater than 70 microg/L was 3.5 (confidence interval: 1.4 to 8.6). CONCLUSIONS: Postoperative AF has no correlation to the inflammatory marker CRP in heart surgery patients. Ischemic myocardial injury might predispose for postoperative AF.
|
|
4. |
- Ajpi, Cesario, et al.
(author)
-
Crystal structure and Hirshfeld surface analysis of poly[tris-(μ4-benzene-1,4-di-carboxyl-ato)tetra-kis-(di-methyl-formamide)-trinickel(II)] : a two-dimensional coordination network.
- 2019
-
In: Acta Crystallographica Section E. - 2056-9890. ; 75:Pt 12, s. 1839-1843
-
Journal article (peer-reviewed)abstract
- The crystal structure of the title compound, [Ni3(C8H4O4)3(C3H7NO)4], is a two-dimensional coordination network formed by trinuclear linear Ni3(tp)3(DMF)4 units (tp = terephthalate = benzene-1,4-di-carboxyl-ate and DMF = di-methyl-formamide) displaying a characteristic coordination mode of acetate groups in polynuclear metal-organic compounds. Individual trinuclear units are connected through tp anions in a triangular network that forms layers. One of the DMF ligands points outwards and provides inter-actions with equivalent planes above and below, leaving the second ligand in a structural void much larger than the DMF mol-ecule, which shows positional disorder. Parallel planes are connected mainly through weak C-H⋯O, H⋯H and H⋯C inter-actions between DMF mol-ecules, as shown by Hirshfeld surface analysis.
|
|
5. |
- Ajpi Condori, Cesario, et al.
(author)
-
Synthesis and Characterization of LiFePO4-PANI Hybrid Material as Cathode for Lithium-Ion Batteries
- 2020
-
In: Materials. - : MDPI AG. - 1996-1944. ; 13:12
-
Journal article (peer-reviewed)abstract
- This work focuses on the synthesis of LiFePO4-PANI hybrid materials and studies their electrochemical properties (capacity, cyclability and rate capability) for use in lithium ion batteries. PANI synthesis and optimization was carried out by chemical oxidation (self-assembly process), using ammonium persulfate (APS) and H3PO4, obtaining a material with a high degree of crystallinity. For the synthesis of the LiFePO4-PANI hybrid, a thermal treatment of LiFePO(4)particles was carried out in a furnace with polyaniline (PANI) and lithium acetate (AcOLi)-coated particles, using Ar/H(2)atmosphere. The pristine and synthetized powders were characterized by XRD, SEM, IR and TGA. The electrochemical characterizations were carried out by using CV, EIS and galvanostatic methods, obtaining a capacity of 95 mAhg(-1)for PANI, 120 mAhg(-1)for LiFePO(4)and 145 mAhg(-1)for LiFePO4-PANI, at a charge/discharge rate of 0.1 C. At a charge/discharge rate of 2 C, the capacities were 70 mAhg(-1)for LiFePO(4)and 100 mAhg(-1)for LiFePO4-PANI, showing that the PANI also had a favorable effect on the rate capability.
|
|
6. |
- Ajpi Condori, Cesario, et al.
(author)
-
Synthesis and spectroscopic characterization of Fe3+-BDC metal organic framework as material for lithium ion batteries
- 2023
-
In: Journal of Molecular Structure. - : Elsevier B.V.. - 0022-2860 .- 1872-8014. ; 1272
-
Journal article (peer-reviewed)abstract
- This work presents synthesis and spectroscopic characterization of a new metal-organic framework (MOF). The compound Fe-BDC-DMF was synthetized by the solvothermal method and prepared via a reaction between FeCl3.6H2O and benzene-1,4-dicarboxylic acid (H2BDC) or terephthalic acid using N,N-dimethylformamide (DMF) as solvent. The powder was characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and infrared spectroscopy (IR) analysis. The electrochemical properties were investigated in a typical lithium-ion battery electrolyte by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charging and discharging. The synthetized Fe-BDC-DMF metal-organic framework (MOF) contains a mixture of three phases, identified by PXRD as: MOF-235, and MIL-53(Fe) monoclinic with C2/c and P21/c space groups. The structure of the Fe-BDC is built up from Fe3+ ions, terephalates (BDC) bridges and in-situ-generated DMF ligands. The electrochemical measurements conducted in the potential range of 0.5–3.5 V vs. Li+/Li0 show the voltage profiles of Fe-BDC and a plateau capacity of around 175 mAh/g. © 2022 The Author(s)
|
|
7. |
- Ajpi Condori, Cesario, et al.
(author)
-
Synthesis and spectroscopic characterization of NiII coordination network : Poly-[tris(µ4-Benzene-1,4-dicarboxylato)-tetrakis(µ1-dimethylformamide-κ1O)-trinickel(II)] as material for lithium ion batteries
- 2022
-
In: Journal of Molecular Structure. - : Elsevier B.V.. - 0022-2860 .- 1872-8014. ; 1265
-
Journal article (peer-reviewed)abstract
- The compound Ni3(C8H4O4)3(C3H7NO)3, poly-[tris(µ4-Benzene-1,4-dicarboxylato)-tetrakis(µ1-dimethylformamide-κ1O)-trinickel(II)], was synthesized by the solvothermal method prepared via reaction between NiCl2•6H2O and terephthalic acid using N,N-dimethylformamide (DMF) as solvent. The structure was characterized by powder X-ray diffraction and infrared spectroscopy analyses. The electrochemical properties as a potential active material in lithium-ion batteries were characterized by electrochemical impedance spectroscopy and galvanostatic charge-discharge curves in a battery half-cell. The characterization results show that the coordination network contains one independent structure in the asymmetric unit. It is constructed from Ni2+ ions, terephthalate bridges and in-situ-generated DMF ligands, forming two similar two-dimensional (2D) layer structures. These similar 2D layers are in an alternating arrangement and are linked with each other by dense H—H interactions (45%) to generate a three-dimensional (3D) supramolecular framework with ordered and disordered DMF molecules. The electrochemical measurements, conducted in the potential range of 0.5–3.5 V vs Li/Li+, show that Ni3(C8H4O4)3(C3H7NO)4 has good electrochemical properties and can work as anode in lithium-ion batteries. The material presents an initial specific capacity of ∼420 mAh g−1, which drops during consecutive scans but stabilizes at ∼50 mAh g−1. However, due to the wide potential range there are indications of a gradual collapse of the structure. The electrochemical impedance spectroscopy shows an increase of charge transfer resistance from 24 to 1190 Ohms after cycling likely due to this collapse.
|
|
8. |
|
|
9. |
- Bansch, Peter, et al.
(author)
-
A Model for Evaluating the Effects of Blunt Skeletal Muscle Trauma on Microvascular Permeability and Plasma Volume in the Rat
- 2010
-
In: Shock. - 1540-0514. ; 33:4, s. 399-404
-
Journal article (peer-reviewed)abstract
- The objective of the present study was to develop an experimental model suitable for studying the effects of a nonhemorrhagic soft tissue trauma on plasma volume (PV) and microvascular permeability. Anesthetized Sprague-Dawley rats were exposed to a sham procedure or a laparotomy followed by a standardized trauma to the abdominal rectus muscle. We evaluated the effects of trauma on transcapillary escape rate and on PV (3 h after trauma) using I-125-albumin as tracer and on edema formation in the traumatized muscle with a wet- versus dry- weight method. The effects of the trauma on the cytokines IFN-gamma, IL-4, IL-6, IL-10, and TNF-alpha were investigated 1 and 3 h after trauma in a separate group. Transcapillary escape rate was 13.9% per hour in the sham animals compared with 18.5% per hour in the traumatized animals (P < 0.05). Because arterial and venous blood pressures were not altered by the trauma, the change in transcapillary escape rate most likely reflects a change in microvascular permeability. Plasma volume decreased from 42 mL/kg at baseline to 31 mL/kg at the end of the experiments (P < 0.05) in the trauma group, whereas PV remained unchanged in the sham group. Only 15% of the PV loss could be referred to edema in the traumatized muscle. Trauma induced a significant increase in IL-6 and IL-10 after 1 h. We conclude that the present nonhemorrhagic trauma induces an increase in microvascular permeability in the traumatized tissue and in other parts of the body, resulting in hypovolemia. The model may be used for the evaluation of different therapeutic interventions aimed at the correction of hypovolemia.
|
|
10. |
|
|