1. |
- Acker, Pascal, et al.
(author)
-
π-Conjugation Enables Ultra-High Rate Capabilities and Cycling Stabilities in Phenothiazine Copolymers as Cathode-Active Battery Materials
- 2019
-
In: Advanced Functional Materials. - : John Wiley & Sons. - 1616-301X .- 1616-3028. ; 29:45
-
Journal article (peer-reviewed)abstract
- In recent years, organic battery cathode materials have emerged as an attractive alternative to metal oxide–based cathodes. Organic redox polymers that can be reversibly oxidized are particularly promising. A drawback, however, often is their limited cycling stability and rate performance in a high voltage range of more than 3.4 V versus Li/Li+. Herein, a conjugated copolymer design with phenothiazine as a redox‐active group and a bithiophene co‐monomer is presented, enabling ultra‐high rate capability and cycling stability. After 30 000 cycles at a 100C rate, >97% of the initial capacity is retained. The composite electrodes feature defined discharge potentials at 3.6 V versus Li/Li+ due to the presence of separated phenothiazine redox centers. The semiconducting nature of the polymer allows for fast charge transport in the composite electrode at a high mass loading of 60 wt%. A comparison with three structurally related polymers demonstrates that changing the size, amount, or nature of the side groups leads to a reduced cell performance. This conjugated copolymer design can be used in the development of advanced redox polymers for batteries.
|
|
2. |
- Aderne, Rian E., et al.
(author)
-
On the energy gap determination of organic optoelectronic materials : the case of porphyrin derivatives
- 2022
-
In: Materials Advances. - : Royal Society of Chemistry. - 2633-5409. ; :3, s. 1791-1803
-
Journal article (peer-reviewed)abstract
- The correct determination of the ionization potential (IP) and electron affinity (EA) as well as the energy gap is essential to properly characterize a series of key phenomena related to the applications of organic semiconductors. For example, energy offsets play an essential role in charge separation in organic photovoltaics. Yet there has been a lot of confusion involving the real physical meaning behind those quantities. Experimentally the energy gap can be measured by direct techniques such as UV-Vis absorption, or indirect techniques such as cyclic voltammetry (CV). Another spectroscopic method is the Reflection Electron Energy Loss Spectroscopy (REELS). Regarding data correlation, there is little consensus on how the REELS' energy gap can be interpreted in light of the energies obtained from other methodologies such as CV, UV-Vis, or photoemission. In addition, even data acquired using those traditional techniques has been misinterpreted or applied to derive conclusions beyond the limits imposed by the physics of the measurement. A similar situation also happens when different theoretical approaches are used to assess the energy gap or employed to explain outcomes from experiments. By using a set of porphyrin derivatives as model molecules, we discuss some key aspects of those important issues. The peculiar properties of these porphyrins demonstrate that even straightforward measurements or calculations performed in a group of very similar molecules need a careful interpretation of the outcomes. Differences up to 660 meV (similar to 190 meV) are found comparing REELS (electrochemical) measurements with UV-Vis energy gaps, for instance. From the theoretical point of view, a reasonable agreement with electrochemical measurements of the IP, EA, and the gap of the porphyrins is only obtained when the calculations involve the full thermodynamics of the redox processes. The purpose of this work is to shed light on the differences and similarities of those aforementioned characterization methods and provide some insight that might help one to develop a critical analysis of the different experimental and theoretical methodologies.
|
|
3. |
- Avila, Harold C., et al.
(author)
-
High hole-mobility of rrP3HT in organic field-effect transistors using low-polarity polyurethane gate dielectric
- 2018
-
In: Organic electronics. - : ELSEVIER SCIENCE BV. - 1566-1199 .- 1878-5530. ; 58, s. 33-37
-
Journal article (peer-reviewed)abstract
- We report unusually high charge carrier mobilities for regioregular poly(3-hexyltiophene) (rrP3HT) in organic field-effect transistors (OFETs) using polyurethane (PU) as dielectric layer. Our devices display hole mobilities up to 1.37 cm(2)/V in the saturation regime and an ON/OFF current ratio higher than 10(3), operating at voltages as low as -10 V, with a high I-DS current of 1.5 mu A. We assign the measured high mobilities mainly to the low density of randomly-oriented electric dipoles at the semiconductor/dielectric interface, which leads to a narrow energy distribution of the electronic levels available for charge transport in rrP3HT. This is confirmed by experimental and theoretical techniques: (1) temperature-dependent transport measurements for extraction of disorder-induced distribution of electronic levels; (2) density functional theory (DFT) calculations of electric dipole moments of PU; and (3) liquid contact-angle measurements for the dipolar component of dielectric surface tension.
|
|
4. |
- Axelsson, Martin, et al.
(author)
-
Small Organic Molecule Based on Benzothiadiazole for Electrocatalytic Hydrogen Production
- 2021
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 143:50, s. 21229-21233
-
Journal article (peer-reviewed)abstract
- A small organic molecule 2,1,3-benzothiadiazole-4, 7-dicarbonitrile (BTDN) is assessed for electrocatalytic hydrogen evolution on glassy carbon electrode and shows a hydrogen production Faradaic efficiency of 82% in the presence of salicylic acid. The key catalytic intermediates of reduced species BTDN-. and protonated intermediates are characterized or hypothesized by using various spectroscopic methods and density functional theory (DFT)-based calculations. With the experimental and theoretical results, a catalytic mechanism of BTDN for electrocatalytic H-2 evolution is proposed.
|
|
5. |
- Benatto, L., et al.
(author)
-
Comparing C-60 and C-70 as acceptor in organic solar cells : Influence of the electronic structure and aggregation size on the photovoltaic characteristics
- 2020
-
In: Thin Solid Films. - : Elsevier. - 0040-6090 .- 1879-2731. ; 697
-
Journal article (peer-reviewed)abstract
- The difference in aggregation size of the C-60 and C-70 fullerenes affect the photovoltaic performance of devices assembled in the so-called bilayer architecture with poly [2,7-(9,9- dioctyl- dibenzosilole)- alt-4,7- bis(thiophen-2-yl)benzo- 2,1,3- thiadiazole] (PSiF-DBT) as the electron donor material. Despite the better performance of the C-70 devices, which is related to the high absorption coefficient in the visible range and the superior charge transport properties, the short-circuit current variation upon annealing treatment at 100 degrees C is approximately twice bigger when the C-60 is the acceptor. We attribute this effect to the tendency of C-60 in form smaller aggregate domains relatively to the C-70. The increased roughness on the polymeric surface after annealing results in an enhanced donor/acceptor contact area and assists the fullerene diffusion deeper inside the polymeric layer. This effect leads to a better mixing between donor and acceptor species and create a interpenetrating layer close to the so-called bulk heterojunction. Since C-60 forms smaller aggregates, this mechanism is more pronounced for this molecule. Therefore, a significant variation in the performance of the C-60 devices is observed after this kind of treatment. Density Functional Theory calculations of the potential energy of interaction between two fullerene molecules and X-Ray measurements gives evidences to support this idea. In addition, combining spectrally resolved external quantum efficiency measurements with optical modeling our results also indicate the occurrence of the bilayer interfacial mixing for PSiF-DBT/C-60.
|
|
6. |
- Benatto, L., et al.
(author)
-
Electronic and structural properties of fluorene-thiophene copolymers as function of the composition ratio between the moieties : a theoretical study
- 2018
-
In: Physical Chemistry, Chemical Physics - PCCP. - : ROYAL SOC CHEMISTRY. - 1463-9076 .- 1463-9084. ; 20:31, s. 20447-20458
-
Journal article (peer-reviewed)abstract
- Through theoretical analysis, we study relevant properties of some molecular structures formed by oligothiophenes (T) and dioctylfluorenes (F) units, commonly employed in the fabrication of different kinds of optical and electronic devices. For so, we first consider F-(T)(n)-F molecules with different numbers of thiophene rings (n). Among other characteristics, we calculate the dipole moment change between the ground and excited state ((ge)), a quantity that greatly influences the exciton dissociation and charge carrier mobility. We show that the planarity of the ground state geometry correlates (ge) to the exciton binding energy (E-b), with higher (ge)'s corresponding to lower E-b's when n > 3. We also unveil a relevant dependence of (ge) with the odd-even parity of n and that (ge) assumes higher values when the molecule is composed by bithiophene (instead of simple thiophenes) moieties in the syn-conformation (with the two heteroatoms pointing in the same direction). From molecules results, we then address larger systems, formed by different oligomers of F-T copolymers containing blocks of dioctylfluorenes and bithiophenes (T2). We systematic investigate their electronic and structural properties as function of the composition ratio between the T2 and F moieties. Similar to the molecules, we deduce that the magnitude of (ge) is higher for the syn conformer of the T2 unit. Moreover, the highest values of (ge) are achieved when the number of the T2 increases relative to a fixed number of the F units in the mer. Such behaviors are in agreement and actually can qualitative explain measurements in the literature on the quantum efficiency of charge carrier generation in F-T copolymers. The present findings can be helpful in designing novel materials with improved photoelectric responses.
|
|
7. |
- Benatto, Leandro, et al.
(author)
-
Molecular origin of efficient hole transfer from non-fullerene acceptors : insights from first-principles calculations
- 2019
-
In: Journal of Materials Chemistry C. - : Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 7:39, s. 12180-12193
-
Journal article (peer-reviewed)abstract
- Due to the strong exciton binding energy (E-b) of organic materials, the energy offset between donor (D) and acceptor (A) materials is essential to promote charge generation in organic solar cells (OSCs). Yet an efficient exciton dissociation from non-fullerene acceptors (NFAs) began to be observed in D/A blends even at very low driving force for hole transfer (Delta H-h). The mechanism behind this efficient photoinduced hole transfer (PHT) remains unclear since current estimates from calculations of isolated molecules indicate that E-b > Delta H-h. Here we rationalize these discrepancies using density functional theory (DFT), the total Gibbs free energy method and the extended Huckel theory (EHT). First, we employed DFT to calculate E-b for NFAs of three representative groups (perylene diimide derivatives, indacenodithiophene and subphthalocyanines) as well as for fullerene acceptors (FAs). Considering isolated molecules in the calculations, we verified that E-b for NFAs is lower than for FAs but still higher than the experimental Delta H-h in which efficient PHT has been observed. Finding the molecular geometry of the excited state, we also obtain that the structural relaxation after photoexcitation tends to further decrease (increase) E-b for NFAs (FAs). This effect helps explain the delayed charge generation measured in some NFA systems. However, this effect is still not large enough for a significant decrease in E-b. We then applied EHT to quantify the decrease of E-b induced by energy levels coupling between stacked molecules in a model aggregate. We then estimated the number of stacked molecules so that E-b approaches Delta H-h's. We found that small NFA aggregates, involving around 5 molecules, are already large enough to explain the experiments. Our results are justified by the low energy barrier to the generation of delocalized states in these systems (especially for the hole delocalization). Therefore, they indicate that molecular systems with certain characteristics can achieve efficient molecular orbital delocalization, which is a key factor to allow an efficient exciton dissociation in low-driving-force systems. These theoretical findings provide a sound explanation to very recent observations in OSCs.
|
|
8. |
- Benatto, L., et al.
(author)
-
Understanding the effect of solvent additive in polymeric thin film : turning a bilayer into a bulk heterojunction-like photovoltaic device
- 2020
-
In: Journal of Physics D. - : IOP Publishing. - 0022-3727 .- 1361-6463. ; 53:36
-
Journal article (peer-reviewed)abstract
- Here we report the effect of an additive solvent, 1,8-diiodooctane (DIO), on the performance of a bilayer organic photovoltaic device in which the active layer comprises poly[2,7-(9,9-bis(2 ethylhexyl)-dibenzosilole)-alt-4,7-bis(thiophen-2-yl)benzo-2,1,3-thiadiazole] (PSiF-DBT) as the electron donor material and C60 as the electron acceptor material. We observed that when the donor layer was treated with 1% of DIO the power conversion efficiency (PCE) of the device increased by 138.4% in relation to the device with an untreated donor layer, and 21.3% in relation to the device containing a donor layer submitted to thermal annealing. The main effects that lead to this increase in PCE are the large interfacial area between donor and acceptor materials and the improved conductivity at low voltages. The increase in polymer surface roughness leads to a more effective PSiF-DBT/C60 interface for exciton dissociation. This effect, as well as the increase in the conductivity, raised the short circuit current density (JSC) to 13.89 mA cm−2 and the PCE to 4.84%. Our conclusions are supported by morphological analysis, chemical cross-sectional evaluations with advanced microscopy techniques, charge mobility measurements, as well as by theoretical simulations of the devices in which the changes on the donor/acceptor interfacial area were considered. The outcomes suggest that solvent additives could be an alternative treatment to replace the thermal annealing, which imposes further difficulties in performing lab-to-manufacturing upscaling.
|
|
9. |
- Carvalho, Rodrigo P, et al.
(author)
-
Atomic-scale Modelling of Redox-active Organic Molecules and Polymers for Energy Applications
- 2020
-
In: Redox Polymers for Energy and Nanomedicine. - : Royal Society of Chemistry. - 9781788018715 ; , s. 93-136
-
Book chapter (other academic/artistic)abstract
- The use of computational techniques in materials science is currently expanding rapidly due to the better capabilities of computer infrastructure and increasing user friendliness of relevant software. This growth is also experienced for redox-active organic matter aimed at utilization in energy storage and conversion devices. We here cover a range of material modelling technologies – focused on electronic structure calculations and force field methods – which have been applied for these organic materials, targeting a broad range of materials categories and possible applications. We also take a look at how novel computational tools are likely to make an even greater impact on the field in the near future, where they can be used as predictive tools for finding novel relevant molecular systems for electronic applications. It is argued that the versatility of organic materials, possessing relevant properties over very different length scales, make computational tools particularly useful for achieving better performance of their devices.
|
|
10. |
- Carvalho, Rodrigo P., et al.
(author)
-
Understanding the lithiation limits of high-capacity organic battery anodes by atomic charge derivative analysis
- 2022
-
In: Journal of Chemical Physics. - : American Institute of Physics (AIP). - 0021-9606 .- 1089-7690. ; 157:18
-
Journal article (peer-reviewed)abstract
- The superlithiation of organic anodes is a promising approach for developing the next generation of sustainable Li-ion batteries with high capacity. However, the lack of fundamental understanding hinders its faster development. Here, a systematic study of the lithiation processes in a set of dicarboxylate-based materials is carried out within the density functional theory formalism. It is demonstrated that a combined analysis of the Li insertion reaction thermodynamics and the conjugated-moiety charge derivative enables establishing the experimentally observed maximum storage, thus allowing an assessment of the structure-function relationships also.
|
|