1. |
- Klionsky, Daniel J., et al.
(author)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
In: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Research review (peer-reviewed)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
2. |
-
- 2019
-
Journal article (peer-reviewed)
|
|
3. |
- Cheng, Shi-Ping, et al.
(author)
-
Haplotype-resolved genome assembly and allele-specific gene expression in cultivated ginger
- 2021
-
In: Horticulture Research. - : Springer Nature. - 2052-7276. ; 8:1
-
Journal article (peer-reviewed)abstract
- Ginger (Zingiber officinale) is one of the most valued spice plants worldwide; it is prized for its culinary and folk medicinal applications and is therefore of high economic and cultural importance. Here, we present a haplotype-resolved, chromosome-scale assembly for diploid ginger anchored to 11 pseudochromosome pairs with a total length of 3.1 Gb. Remarkable structural variation was identified between haplotypes, and two inversions larger than 15 Mb on chromosome 4 may be associated with ginger infertility. We performed a comprehensive, spatiotemporal, genome-wide analysis of allelic expression patterns, revealing that most alleles are coordinately expressed. The alleles that exhibited the largest differences in expression showed closer proximity to transposable elements, greater coding sequence divergence, more relaxed selection pressure, and more transcription factor binding site differences. We also predicted the transcription factors potentially regulating 6-gingerol biosynthesis. Our allele-aware assembly provides a powerful platform for future functional genomics, molecular breeding, and genome editing in ginger.
|
|
4. |
- Jia, Kai-Hua, et al.
(author)
-
Chromosome-scale assembly and evolution of the tetraploid Salvia splendens (Lamiaceae) genome
- 2021
-
In: Horticulture Research. - : Oxford University Press (OUP). - 2052-7276 .- 2662-6810. ; 8:1
-
Journal article (peer-reviewed)abstract
- Polyploidization plays a key role in plant evolution, but the forces driving the fate of homoeologs in polyploid genomes, i.e., paralogs resulting from a whole-genome duplication (WGD) event, remain to be elucidated. Here, we present a chromosome-scale genome assembly of tetraploid scarlet sage (Salvia splendens), one of the most diverse ornamental plants. We found evidence for three WGD events following an older WGD event shared by most eudicots (the γ event). A comprehensive, spatiotemporal, genome-wide analysis of homoeologs from the most recent WGD unveiled expression asymmetries, which could be associated with genomic rearrangements, transposable element proximity discrepancies, coding sequence variation, selection pressure, and transcription factor binding site differences. The observed differences between homoeologs may reflect the first step toward sub- and/or neofunctionalization. This assembly provides a powerful tool for understanding WGD and gene and genome evolution and is useful in developing functional genomics and genetic engineering strategies for scarlet sage and other Lamiaceae species.
|
|
5. |
- Jin, Yuqing, et al.
(author)
-
Genome-Wide Variant Identification and High-Density Genetic Map Construction Using RADseq for Platycladus orientalis (Cupressaceae)
- 2019
-
In: G3. - : The Genetics Society of America. - 2160-1836. ; 9:11, s. 3663-3672
-
Journal article (peer-reviewed)abstract
- Platycladus orientalis is an ecologically important native conifer in Northern China and exotic species in many parts of the world; however, knowledge about the species' genetics and genome are very limited. The availability of well-developed battery of genetic markers, with large genome coverage, is a prerequisite for the species genetic dissection of adaptive attributes and efficient selective breeding. Here, we present a genome-wide genotyping method with double-digestion restriction site associated DNA sequencing (ddRAD-seq) that is effective in generating large number of Mendelian markers for genome mapping and other genetic applications. Using 139 megagametophytes collected from a single mother tree, we assembled 397,226 loci, of which 108,683 (27.4%) were polymorphic. After stringent filtering for 1:1 segregation ratio and missing rate of <20%, the remaining 23,926 loci (22% of the polymorphic loci) were ordered into 11 linkage groups (LGs) and distributed across 7,559 unique positions, with a total map length of 1,443 cM and an average spacing of 0.2 cM between adjacent unique positions. The 11 LGs correspond to the species' 11 haploid genome chromosome number. This genetic map is among few high-density maps available for conifers to date, and represents the first genetic map for P. orientalis. The information generated serves as a solid foundation not only for marker-assisted breeding efforts, but also for comparative conifer genomic studies.
|
|
6. |
- Langer, Judith, et al.
(author)
-
Present and Future of Surface-Enhanced Raman Scattering
- 2020
-
In: ACS Nano. - : American Chemical Society (ACS). - 1936-086X .- 1936-0851. ; 14:1, s. 28-117
-
Research review (peer-reviewed)abstract
- The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article. ©
|
|
7. |
- Liu, Hong, et al.
(author)
-
Three-dimensional shape and stress field of a deformation twin in magnesium
- 2023
-
In: Acta Materialia. - : Elsevier. - 1359-6454 .- 1873-2453. ; 250
-
Journal article (peer-reviewed)abstract
- While the three-dimensional (3D) shape and stress field of a twin in hexagonal close-packed (HCP) metals have attracted considerable interest in recent years due to their substantial impact on internal stress and mechanical properties, a detailed understanding of their variation with twin size is still lacking. An analytical model that is not restricted by spatial scale is developed in this work by considering the effects of anisotropic twin boundary energy, elastic strain energy and plastic relaxation to predict the 3D shape with the minimum energy, and the stress field, of an isolated ellipsoidal twin of different sizes. The model is applied to Mg with a focus on the {101¯2} twin type. The analytical calculation results show that the nucleation of the nano-sized twin embryos is facilitated by the stress field near structural defects such as dislocations. During the expansion of this nano-sized twin embryo, the interplay between the elastic strain energy and interfacial energy changes the length of the twin along the twin shear (forward) direction from being shorter to longer than that along the lateral direction. In contrast to the current understandings, the maximum shear stress on the twin plane along the twin shear direction occurs at the lateral, rather than the forward, side of the twin. At the forward side, the maximum shear stress occurs at a distance ahead of the twin tip and this distance increases with increasing twin thickness.
|
|
8. |
- Liu, Hong, et al.
(author)
-
Variant selection of primary–secondary extension twin pairs in magnesium : An analytical calculation study
- 2021
-
In: Acta Materialia. - : Elsevier BV. - 1359-6454 .- 1873-2453. ; 219, s. 1-19
-
Journal article (peer-reviewed)abstract
- Twining is an important deformation mode in magnesium. In a deformed magnesium sample, an extension twin crystal, i.e., {101¯2} twin, can form inside a {101¯2} primary twin, which is named {101¯2}–{101¯2} secondary twin. These secondary twins often appear at the intersection of two primary twins, and form primary–secondary twin pairs. Experimental observations show that the most frequently observed primary–secondary twin pairs have a unique misorientation, i.e., twin variant selection exists. Such variant selection of the primary–secondary twin pairs is studied in this work. The crystallographic analysis reveals that the twin planes of the primary and secondary twins that form a twin pair have coincident intersection lines with the boundary where the twin pair adjoins. An analytical calculation method based on Eshelby's inclusion theory is developed, and the calculation results show that only for this unique misorientation, the stress fields concentrated at the rims of the primary and the secondary twins are mutually favoured. The analysis is further extended to the incoming–outgoing twin pairs across ordinary grain boundaries, and compared with the commonly used geometrical compatibility factor m′. It is found that m′ only gives good prediction for twin transmission when the shear stress component on the twin plane along the twin shear direction of the incoming twin is the major contributor to the resolved shear stress of the outgoing twin. When other stress components play a dominant role, m′ becomes ineffective in prediction, which is the case for the primary–secondary twin pairs.
|
|
9. |
- Nie, Shuai, et al.
(author)
-
Gapless genome assembly of azalea and multi-omics investigation into divergence between two species with distinct flower color
- 2023
-
In: Horticulture Research. - : Oxford University Press. - 2662-6810 .- 2052-7276. ; 10:1
-
Journal article (peer-reviewed)abstract
- The genus Rhododendron (Ericaceae), with more than 1000 species highly diverse in flower color, is providing distinct ornamental values and a model system for flower color studies. Here, we investigated the divergence between two parental species with different flower color widely used for azalea breeding. Gapless genome assembly was generated for the yellow-flowered azalea, Rhododendron molle. Comparative genomics found recent proliferation of long terminal repeat retrotransposons (LTR-RTs), especially Gypsy, has resulted in a 125 Mb (19%) genome size increase in species-specific regions, and a significant amount of dispersed gene duplicates (13 402) and pseudogenes (17 437). Metabolomic assessment revealed that yellow flower coloration is attributed to the dynamic changes of carotenoids/flavonols biosynthesis and chlorophyll degradation. Time-ordered gene co-expression networks (TO-GCNs) and the comparison confirmed the metabolome and uncovered the specific gene regulatory changes underpinning the distinct flower pigmentation. B3 and ERF TFs were found dominating the gene regulation of carotenoids/flavonols characterized pigmentation in R. molle, while WRKY, ERF, WD40, C2H2, and NAC TFs collectively regulated the anthocyanins characterized pigmentation in the red-flowered R simsii. This study employed a multi-omics strategy in disentangling the complex divergence between two important azaleas and provided references for further functional genetics and molecular breeding.
|
|
10. |
- Nie, Shuai, et al.
(author)
-
Potential allopolyploid origin of Ericales revealed with gene-tree reconciliation
- 2022
-
In: Frontiers in Plant Science. - : Frontiers Media S.A.. - 1664-462X. ; 13
-
Journal article (peer-reviewed)abstract
- Few incidents of ancient allopolyploidization (polyploidization by hybridization or merging diverged genomes) were previously revealed, although there is significant evidence for the accumulation of whole genome duplications (WGD) in plants. Here, we focused on Ericales, one of the largest and most diverse angiosperm orders with significant ornamental and economic value. Through integrating 24 high-quality whole genome data selected from ~ 200 Superasterids genomes/species and an algorithm of topology-based gene-tree reconciliation, we explored the evolutionary history of in Ericales with ancient complex. We unraveled the allopolyploid origin of Ericales and detected extensive lineage-specific gene loss following the polyploidization. Our study provided a new hypothesis regarding the origin of Ericales and revealed an instructive perspective of gene loss as a pervasive source of genetic variation and adaptive phenotypic diversity in Ericales.
|
|