1. |
- Ougazzaden, A., et al.
(author)
-
GaN thin films on z- and x-cut LiNbO3 substrates by MOVPE
- 2008
-
In: PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS. - : Wiley. ; , s. 1565-1567
-
Conference paper (peer-reviewed)abstract
- We report epitaxial growth of GaN layers on z- and x-cut LiNbO3 substrates using MOVPE. GaN layers with the thickness of 450 nm were characterized using X-ray diffraction. For both, z- and x-cut orientations of LiNbO3 substrates, the GaN layers have c-axis orientation normal to the substrate plane and the in-plane lattice orientation of GaN layers coincides with the primary axes of LiNbO3 substrates. Although GaN layers exhibit almost complete strain relaxation, the residual compressive strain determined with respect to a freestanding GaN is of the order of +0.37% and +0.2% for z- and x-cut substrates, respectively.
|
|
2. |
- Ougazzaden, A., et al.
(author)
-
Growth of GaN by metal organic vapor phase epitaxy on ZnO-buffered c-sapphire substrates
- 2008
-
In: Journal of Crystal Growth. - : Elsevier BV. - 0022-0248 .- 1873-5002. ; 310:5, s. 944-947
-
Journal article (peer-reviewed)abstract
- The materials quality and availability of large-area bulk GaN substrates is currently considered a key problem for the continuing development of improved GaN-based devices. Since industrial fabrication of bulk GaN substrates with suitable materials quality has proven very difficult, the opto-GaN industry is currently based on heteroepitaxy using either c-sapphire or 6H SiC substrates. ZnO is promising as a substrate material for GaN because it has the same wurtzite structure and a relatively small lattice mismatch (similar to 1.8%). In this study, we have successfully grown GaN by MOVPE on ZnO-buffered c-sapphire. The growth conditions required to both prevent ZnO degradation and grow monocrystal thin film of GaN have been obtained. SEM, HRXRD and micro-Raman characterizations underlined the presence of the two layers GaN and ZnO with high structural quality.
|
|
3. |
- Ougazzaden, A., et al.
(author)
-
Progress on new wide bandgap materials BGaN, BGaAlN and their potential applications
- 2007
-
In: Quantum Sensing and Nanophotonic Devices IV. - : SPIE. - 9780819465924 ; , s. G4791-G4791
-
Conference paper (peer-reviewed)abstract
- The development of wide band gap semiconductors extends their applications in optoelectronics devices to the UV domain. Compact lasers and high sensitivity APD detectors in UV range are currently needed for different applications such as, purification, covert communication and real time detection of airborne pathogens. Until now, the full exploitation of these potential materials has been limited by the lack of suitable GaN substrates. Recently, a novel class of materials has been reported based on BGaN and BAlN, potentially reducing the crystal defect densities by orders of magnitude compared to existing wide band gap heterostructures. Characteristics of these new alloys are similar to those of AlGaN materials with the advantage that these can be lattice matched to AlN and SiC substrates. In addition, these materials offer the possibility of using quaternary BAlGaN alloys at Ultra Violet (UV) wavelengths and hence lead to more degrees of freedom in designing sophisticated device structures. In this paper we describe the MOVPE growth conditions used to incorporate boron in GaN and AlGaN. Detailed characterization and analysis in terms of structural and electrical properties are discussed.
|
|