1. |
- Di Paolo, Carolina, et al.
(author)
-
Bioassay battery interlaboratory investigation of emerging contaminants in spikedwater extracts : Towards the implementation of bioanalytical monitoring tools inwater quality assessment and monitoring
- 2016
-
In: Water Research. - : Elsevier. - 0043-1354 .- 1879-2448. ; 104, s. 473-484
-
Journal article (peer-reviewed)abstract
- Bioassays are particularly useful tools to link the chemical and ecological assessments in water quality monitoring. Different methods cover a broad range of toxicity mechanisms in diverse organisms, and account for risks posed by non-target compounds and mixtures. Many tests are already applied in chemical and waste assessments, and stakeholders from the science-police interface have recommended their integration in regulatory water quality monitoring. Still, there is a need to address bioassay suitability to evaluate water samples containing emerging pollutants, which are a current priority in water quality monitoring. The presented interlaboratory study (ILS) verified whether a battery of miniaturized bioassays, conducted in 11 different laboratories following their own protocols, would produce comparable results when applied to evaluate blinded samples consisting of a pristine water extract spiked with four emerging pollutants as single chemicals or mixtures, i.e. triclosan, acridine, 17α-ethinylestradiol (EE2) and 3-nitrobenzanthrone (3-NBA). Assays evaluated effects on aquatic organisms from three different trophic levels (algae, daphnids, zebrafish embryos) and mechanism-specific effects using in vitro estrogenicity (ER-Luc, YES) and mutagenicity (Ames fluctuation) assays. The test battery presented complementary sensitivity and specificity to evaluate the different blinded water extract spikes. Aquatic organisms differed in terms of sensitivity to triclosan (algae > daphnids > fish) and acridine (fish > daphnids > algae) spikes, confirming the complementary role of the three taxa for water quality assessment. Estrogenicity and mutagenicity assays identified with high precision the respective mechanism-specific effects of spikes even when non-specific toxicity occurred in mixture. For estrogenicity, although differences were observed between assays and models, EE2 spike relative induction EC50 values were comparable to the literature, and E2/EE2 equivalency factors reliably reflected the sample content. In the Ames, strong revertant induction occurred following 3-NBA spike incubation with the TA98 strain, which was of lower magnitude after metabolic transformation and when compared to TA100. Differences in experimental protocols, model organisms, and data analysis can be sources of variation, indicating that respective harmonized standard procedures should be followed when implementing bioassays in water monitoring. Together with other ongoing activities for the validation of a basic bioassay battery, the present study is an important step towards the implementation of bioanalytical monitoring tools in water quality assessment and monitoring.
|
|
2. |
- Feiler, Ute, et al.
(author)
-
Inter-laboratory trial of a standardized sediment contact test with the aquatic plant Myriophyllum aquaticum (ISO 16191)
- 2014
-
In: Environmental Toxicology and Chemistry. - : Wiley. - 0730-7268 .- 1552-8618. ; 33:3, s. 662-670
-
Journal article (peer-reviewed)abstract
- A whole-sediment toxicity test with Myriophyllum aquaticum has been developed by the German Federal Institute of Hydrology and standardized within the International Organization for Standardization (ISO; ISO 16191). An international ring-test was performed to evaluate the precision of the test method. Four sediments (artificial, natural) were tested. Test duration was 10 d, and test endpoint was inhibition of growth rate (r) based on fresh weight data. Eighteen of 21 laboratories met the validity criterion of r >= 0.09 d(-1) in the control. Results from 4 tests that did not conform to test-performance criteria were excluded from statistical evaluation. The inter-laboratory variability of growth rates (20.6%-25.0%) and inhibition (26.6%-39.9%) was comparable with the variability of other standardized bioassays. The mean test-internal variability of the controls was low (7% [control], 9.7% [solvent control]), yielding a high discriminatory power of the given test design (median minimum detectable differences [MDD] 13% to 15%). To ensure these MDDs, an additional validity criterion of CV <= 15% of the growth rate in the controls was recommended. As a positive control, 90 mg 3,5-dichlorophenol/kg sediment dry mass was tested. The range of the expected growth inhibition was proposed to be 35 +/- 15%. The ring test results demonstrated the reliability of the ISO 16191 toxicity test and its suitability as a tool to assess the toxicity of sediment and dredged material. Environ Toxicol Chem 2014;33:662-670. (c) 2013 SETAC
|
|
3. |
- Rivière, Guillaume N., et al.
(author)
-
Toward waste valorization by converting bioethanol production residues into nanoparticles and nanocomposite films
- 2021
-
In: Sustainable Materials and Technologies. - : Elsevier BV. - 2214-9937. ; 28
-
Journal article (peer-reviewed)abstract
- A “waste-valorization” approach was developed to transform recalcitrant hydrolysis lignin (HL) from second-generation bioethanol production into multifunctional bio-based products. The hydrolysis lignin (HL) was extracted with aqueous acetone, yielding two fractions enriched in lignin and cellulose, respectively. The soluble hydrolysis lignin (SHL) was converted into anionic and cationic colloidal lignin particles (CLPs and c-CLPs). The insoluble cellulose-rich fraction was transformed into lignocellulosic nanofibrils that were further combined with CLPs or c-CLPs to obtain nanocomposite films with tailored mechanical properties, oxygen permeability and antioxidant properties. To enable prospective applications of lignin in nanocomposite films and beyond, CLPs and c-CLPs were also produced from a soda lignin (SL) and the influence of the lignin type on the particle size and ecotoxicity was evaluated. Finally, the carbon footprint of the entire process from hydrolysis lignin to films was assessed and an integration to industrial scale was considered to reduce the energy consumption. While most previous work utilizes purified lignin and pristine and often purified cellulose fibers to produce nanomaterials, this work provides a proof of concept for utilizing the recalcitrant lignin-rich side stream of the bioethanol process as raw material for functional nanomaterials and renewable composites.
|
|