1. |
- Blombäck, Karin, et al.
(author)
-
Comparing measures for determination of phosphorus saturation as a method to estimate dissolved P in soil solution
- 2021
-
In: Geoderma. - : Elsevier. - 0016-7061 .- 1872-6259. ; 383
-
Journal article (peer-reviewed)abstract
- In response to concerns over the translocation of P from soils to P-sensitive water bodies, there is high demand for developing simple indicators for evaluating a soil’s risk of releasing P into solution. Many studies have shown that the degree of soil phosphorus saturation (DPS), calculated as the ratio of soil P concentration to soil P sorption capacity (PSC), is good predictor of a soil’s risk of releasing P in solution. In this study we compared four different DPS indices in how well they predicted dissolved P following extraction with either a 0.01 M CaCl2 (PCaCl2) solution or deionized water (PW). The first two indices were calculated from the ratio of extractable P to extractable Al and Fe using either acid ammonium oxalate (AlOX + FeOX) or ammonium lactate solutions (AlAL + FeAL). The second two DPS indices were calculated from the ratio of either Olsen-extractable P or AL-extractable P with sorption capacity estimated from the single point P sorption index (PSI). On a subset of 11 soils, we compared the different methods for estimating PSC with fitted Langmuir sorption maximum (Smax) using data from complete sorption isotherms. Both (AlOX + FeOX) and PSI were well correlated with Smax and hence regarded as good estimates for P sorption capacity. Conversely, (AlAL + FeAL) was not significantly correlated with Smax. P saturation calculated from PSI together with PAL or POls predicted PCaCl2 and PW best, whereas P saturation calculated from ammonium oxalate predicted PCaCl2 and PW the least. We did not find notable improvements in the regression models when we added a second explanatory variable (clay content, pH or total carbon) to the models. Our results show that multiple measures of P saturation provide similar predictions of a soiĺs potential for releasing dissolved P into soil solution. This provides flexibility in how P saturation indices are calculated to identify leaching prone hotspots.
|
|
2. |
- Parvage, Mohammed Masud, et al.
(author)
-
Sequential removal of nitrate and sulfate in woodchip and hematite : coated biochar bioreactor
- 2023
-
In: Environmental Science. - : Royal Society of Chemistry. - 2053-1400 .- 2053-1419. ; 9:2, s. 489-499
-
Journal article (peer-reviewed)abstract
- Laboratory column experiments have been used to study the sequential removal of nitrate (NO3−) and sulfate (SO42−) from mine water, where NO3− was removed through denitrification and SO42− was removed through SO42− reduction and the subsequent precipitation of hydrogen sulfide (H2S) in a hematite-coated biochar (HCB) bioreactor. Denitrification and SO42− reduction were investigated in columns filled with pine woodchips and pine woodchips + biochar, both with and without the addition of lactate. Experimental results indicated that a >90% NO3− removal from 50 mg L−1 NO3−-N was achieved at a hydraulic residence time of 5 days without lactate addition, but that SO42− reduction was minimal after an initial startup period. Lactate was added to stimulate SO42− reduction, producing H2S with >90% SO42− removal from an initial concentration of 361 mg L−1 SO42−-S. Sulfate concentrations were reduced to a greater extent in the woodchip + biochar column, and NH4+ production was enhanced in both columns after lactate addition. After treatment in the HCB columns, H2S and NH4+ were removed to >95%. X-ray photoelectron spectroscopy (XPS) indicated that S2−, S22−, S0 and NH4+ were accumulating in the HCB columns and surface-bound iron was converted from Fe(III) to Fe(II). The XPS results suggested that the reductive dissolution of hematite preceded the precipitation of H2S as FeS, pyrite and elemental sulfur on the HCB surfaces.
|
|