1. |
- Ravnsbaek, Dorthe B., et al.
(author)
-
Thermal Polymorphism and Decomposition of Y(BH4)(3)
- 2010
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 1520-510X .- 0020-1669. ; 49:8, s. 3801-3809
-
Journal article (peer-reviewed)abstract
- The structure and thermal decomposition of Y(BH4)(3) is studied by in situ synchrotron radiation powder X-ray diffraction (SR-PXD), B-11 MAS NMR spectroscopy, and thermal analysis (thermogravimetric analysis/differential scanning calorimetry). The samples were prepared via a metathesis reaction between LiBH4 and YCl3 in different molar ratios mediated by ball milling. A new high temperature polymorph of Y(BH4)(3), denoted beta-Y(BH4)(3), is discovered besides the Y(BH4)(3) polymorph previously reported, denoted alpha-Y(BH4)(3). beta-Y(BH4)(3) has a cubic crystal structure and crystallizes with the space group symmetry Pm (3) over barm and a bisected a-axis, a = 5.4547(8) angstrom, as compared to alpha-Y(BH4)(3), a = 10.7445(4) angstrom (Pa (3) over bar). beta-Y(BH4)(3) crystallizes with a regular ReO3-type structure, hence the Y3+ cations form cubes with BH4 anions located on the edges. This arrangement is a regular variant of (he distorted Y3+ cube observed in alpha-Y(BH4)(3), which is similar to the high pressure phase of ReO3. The new phase, beta-Y(BH4)(3) is formed in small amounts during ball milling; however, larger amounts are formed under moderate hydrogen pressure via a phase transition from alpha- to beta-Y(BH4)(3), at similar to 180 degrees C. Upon further heating, beta-Y(BH4)(3) decomposes at similar to 190 degrees C to YH3, which transforms to YH2 at 270 degrees C. An unidentified compound is observed in the temperature range 215-280 degrees C, which may be a new Y B H containing decomposition product. The final decomposition product is YB4. These results show that boron remains in the solid phase when Y(BH4)(3) decomposes in a hydrogen atmosphere and that Y(BH4)(3) may store hydrogen reversibly.
|
|
2. |
- Arnbjerg, Lene M., et al.
(author)
-
Structure and Dynamics for LiBH4-LiCl Solid Solutions
- 2009
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 21:24, s. 5772-5782
-
Journal article (peer-reviewed)abstract
- A Surprisingly high degree of structural and compositional dynamics is observed in the system LiBH4-LiCl as a function of temperature and time. Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data reveals that Cl- readily substitutes for BH4- in the Structure of LiBH4. Prolonged heating a sample of LiBH4-LiCl (1:1 molar ratio) above the phase transition temperature and below the melting point (108 < T < 275 degrees C) can produce highly chloride substituted hexagonal lithium borohydride, h-Li(BH4)(l-x)Cl-x, e.g., x similar to 0.42, after heating from room temperature (RT) to 224 degrees C at 2.5 degrees C/min. LiCl has a higher solubility in h-LiBH4 its compared to orthorhombic lithium borohydride, o-LiBH4, which is illustrated by a LiBH4-LiCl (1:1) sample equilibrated at 245 degrees C for 24 days and left at RT for another 13 months. Rietveld refinement reveals that this sample contains o-Li(BH4)(0.91)Cl-0.09 and LiCl. This illustrates a significantly faster dissolution of LiCl in h-LiBH4 its compared to a slower segregation of LiCl from o-LiBH4, which is also demonstrated by in situ SR-PXD from three cycles of heating and cooling of the same Li(BH4)(0.91)Cl-0.09 sample. The substitution of the smaller Cl- for the larger BH4- ion is clearly observed as a reduction in the unit cell volume as a function of time and temperature. A significant stabilization of h-LiBH4 is found to depend on the degree of anion substitution. Variable temperature solid-state magic-angle spinning (MAS) Li-7 and B-13 NMR experiments oil pure LiBH4 show an increase in full width at half maximum (fwhm) when approaching the phase transition from o- to h-LiBH4, which indicates an increase of the relaxation rate (i.e. T-2 decreases). A less pronounced effect is observed for ion-substituted Li(BH4)(1-x)Cl-x, 0.09 < x < 0.42. The MAS NMR experiments also demonstrate a higher degree of motion in the hexagonal phase, i.e., fwhm is reduced by more than a Factor of 10 at the o- to h-LiBH4 phase transition.
|
|
3. |
- Cerny, Radovan, et al.
(author)
-
NaSc(BH4)(4): A Novel Scandium-Based Borohydride
- 2010
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 114:2, s. 1357-1364
-
Journal article (peer-reviewed)abstract
- A new alkaline transition-metal borohydride, NaSc(BH4)(4), is presented. The compound has been studied using a combination of in situ synchrotron radiation powder X-ray diffraction, thermal analysis, and vibrational and NMR spectroscopy. NaSc(BH4)(4) forms at ambient conditions in ball-milled mixtures of sodium borohydride and ScCl3. A new tertiary chloride Na3ScCl6 (P2(1)/n, a = 6.7375(3) angstrom, b = 7.1567(3) angstrom, c = 9,9316(5) angstrom, beta = 90.491(3)degrees, V = 478.87(4) angstrom(3)), isostructural to Na3TiCl6, was identified as an additional phase in all samples. This indicates that the formation of NaSc(BH4)(4) differs from a simple metathesis reaction, and the highest scandium borohydride yield (22 wt %) was obtained with a reactant ratio of ScCl3/NaBH4 of 1:2. NaSc(BH4)(4) crystallizes in the orthorhombic crystal system with the space group symmetry Cmcm (a = 8.170(2) angstrom, b = 11.875(3) angstrom, c = 9.018(2) angstrom, V = 874.9(3) angstrom(3)). The Structure of NaSc(BH4)(4) consists of isolated homoleptic scandium tetraborohydride anions, [Sc(BH4)(4)](-), located inside slightly distorted trigonal Na-6 prisms (each second prism is empty, triangular angles of 55.5 and 69.1 degrees). The experimental results show that each Sc3+ is tetrahedrally Surrounded by four BH4 tetrahedra with a 12-fold coordination of H to Sc, while Na+ is surrounded by six BH4 tetrahedra in a quite regular octahedral coordination with a (6 + 12)-fold coordination of H to Na. The packing of Na+ cations and [Sc(BH)(4))(4)](-) anions in NaSc(BH4)(4) is a deformation variant of the hexagonal NiAs structure type. NaSc(BH4)(4) is stable from RT up to similar to 410 K, Where the compound melts and then releases hydrogen in two rapidly occurring steps between 440 and 490 K and 495 and 540 K. Thermal expansion of NaSc(BH4)(4) between RT and 408 K is anisotropic, and lattice parameter b shows strong anomaly close to the melting temperature.
|
|
4. |
- Cerny, Radovan, et al.
(author)
-
Structure and Characterization of KSc(BH4)(4)
- 2010
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 114:45, s. 19540-19549
-
Journal article (peer-reviewed)abstract
- A new potassium scandium borohydride, KSc(BH4)(4), is presented and characterized by a combination of in situ synchrotron radiation powder X-ray diffraction, thermal analysis, and vibrational and NMR spectroscopy. The title compound, KSc(BH4)(4), forms at ambient conditions in ball milled mixtures of potassium borohydride and ScCl3 together with a new ternary chloride K3ScCl6, which is also structurally characterized. This indicates that the formation of KSc(BH4)(4) differs from a simple metathesis reaction, and the highest scandium borohydride yield (similar to 31 mol %) can be obtained with a reactant ratio KBH4:ScCl3 of 2:1. KSc(BH4)(4) crystallizes in the orthorhombic crystal system, a = 11.856(5), b = 7.800(3), c = 10.126(6) angstrom, v = 936.4(8) angstrom(3) at RT, with the space group symmetry Prima. KSc(BH4)(4) has a BaSO4 type structure where the BH4 tetrahedra take the oxygen positions. Regarding the packing of cations, K+, and complex anions, [Sc(BH4)(4)](-), the structure of KSc(BH4)(4) can be seen as a distorted variant of orthorhombic neptunium, Np, metal. Thermal expansion of KSc(BH4)(4) in the temperature range RT to 405 K is anisotropic, and the lattice parameter b shows strong nonlinearity upon approaching the melting temperature. The vibrational and NMR spectra are consistent with the structural model, and previous investigations of the related compounds ASc(BH4)(4) with A = Li, Na. KSc(BH4)(4) is stable from RT up to similar to 405 K, where the compound melts and then releases hydrogen in two rapid steps approximately at 460-500 K and 510-590 K. The hydrogen release involves the formation of KBH4, which reacts with K3ScCl6 and forms a solid solution, K(BH4)(1-x)Cl-x. The ternary potassium scandium chloride K3ScCl6 observed in all samples has a monoclinic structure at room temperature, P2(1)/a, a = 12.729(3), b = 7.367(2), c = 12.825(3) angstrom, beta = 109.22(2)degrees, V = 1135.6(4) angstrom(3), which is isostructural to K3MoCl6. The monoclinic polymorph transforms to cubic at 635 K, a = 10.694 angstrom (based on diffraction data measured at 769 K), which is isostructural to the high temperature phase of K3YCl6.
|
|
5. |
- Hansen, Bjarne R. S., et al.
(author)
-
Hydrogen Storage Capacity Loss in a LiBH4-Al Composite
- 2013
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 117:15, s. 7423-7432
-
Journal article (peer-reviewed)abstract
- A detailed investigation of the decomposition reactions and decay in the hydrogen storage capacity during repeated hydrogen release and uptake cycles for the reactive composite LiBH4-Al (2:3) is presented. Furthermore, the influence of a titanium boride, TiB2, additive is investigated. The study combines information from multiple techniques: in situ synchrotron radiation powder X-ray diffraction, Sieverts measurements, simultaneous thermogravimetric analysis, differential scanning calorimetry and mass spectroscopy, solid-state magic-angle spinning nuclear magnetic resonance (MAS NMR), and Raman spectroscopy. The decomposition of LiBH4-Al results in the formation of LiAl, AlB2, and Li2B12H12 via several reactions and intermediate compounds. The TiB2 additive appears to have a limited effect on the decomposition pathway of the samples, but seems to facilitate formation of intermediate species at lower temperatures compared to the sample without additive. Solid solutions of LixAl1-xB2 or Al1-xB2 are observed during decomposition and from Rietveld refinement the composition of the solid solution is estimated to be Li0.22Al0.78B2. The intercalation of Li in the AlB2 structure is further investigated by B-11 and Al-27 MAS NMR spectra of the LiH-AlB2 and AlB2 samples (presented in Supporting Information). Hydrogen release and uptake for LiBH4-Al reveals a significant loss in the hydrogen storage capacity, that is, after four cycles a capacity of about 45% remains, and after 10 cycles, the capacity is degraded to approximately 15% of the theoretically available hydrogen content. This capacity loss may be due to the formation of Li2B12H12, as observed by B-11 MAS NMR and Raman spectroscopy. Formation of Li2B12H12 has previously been observed during the decomposition of LiBH4, but it has not been reported earlier in the LiBH4-Al (2:3) system.
|
|
6. |
- Hirscher, Michael, et al.
(author)
-
Materials for hydrogen-based energy storage - past, recent progress and future outlook
- 2020
-
In: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 827
-
Journal article (peer-reviewed)abstract
- Globally, the accelerating use of renewable energy sources, enabled by increased efficiencies and reduced costs, and driven by the need to mitigate the effects of climate change, has significantly increased research in the areas of renewable energy production, storage, distribution and end-use. Central to this discussion is the use of hydrogen, as a clean, efficient energy vector for energy storage. This review, by experts of Task 32, Hydrogen-based Energy Storage of the International Energy Agency, Hydrogen TCP, reports on the development over the last 6 years of hydrogen storage materials, methods and techniques, including electrochemical and thermal storage systems. An overview is given on the background to the various methods, the current state of development and the future prospects. The following areas are covered; porous materials, liquid hydrogen carriers, complex hydrides, intermetallic hydrides, electrochemical storage of energy, thermal energy storage, hydrogen energy systems and an outlook is presented for future prospects and research on hydrogen-based energy storage.
|
|