| 1. |
|
|
| 2. |
|
|
| 3. |
- Dowsey, M. M., et al.
(author)
-
Variations in pain and function before and after total knee arthroplasty : A comparison between Swedish and Australian cohorts
- 2017
-
In: Osteoarthritis and Cartilage. - : Elsevier BV. - 1063-4584. ; 25:6, s. 885-891
-
Journal article (peer-reviewed)abstract
- Objective: Preoperative pain and function is viewed as an important predictor of total knee arthroplasty (TKA) outcomes. We examined whether variations in pain and function outcomes existed at 12 months between two centres in Sweden and Australia, and whether this was explained by variations in patient presentation for TKA. Methods: This was a retrospective analysis of prospectively collected data. Patients from one centre in Australia (St. Vincent's Hospital (SVH), N = 516) and in Sweden (Trelleborg (TBG), N = 899) who underwent primary TKA between 2012 and 2013. The Western Ontario and McMaster Universities Arthritis Index (WOMAC) was analysed pre- and 12 months' post TKA from which non-response to surgery was determined using the OMERACT-OARSI criteria. Multiple linear regression analysis was used to examine the relationship between change in pain and function and surgery centre, adjusting for preoperative patient characteristics and surgical technique. Results: Despite worse preoperative outcomes in all subscales of the WOMAC for the SVH cohort, there were no clinically meaningful differences in 12-month WOMAC subscales nor change in WOMAC subscales between SVH and TBG. Almost identical proportions of patients were considered OMERACT-OARSI responders, 85.7% (SVH) and 85.9% (TBG), however for the SVH cohort 25 (4.9%) were moderate and 417 (80.8%) were high responders, compared to the TBG cohort of which 225 (25%) were moderate and 547 (60.9%) were high responders. Conclusion: Despite differences in preoperative presentation between 2 countries, improvements in pain and function and the proportion of individual who responded to TKA surgery at 1 year were similar. Factors related to poor response to TKA surgery require further elucidation.
|
|
| 4. |
- Niburg, M., et al.
(author)
-
A complete sub-system of parallel optical interconnects for telecom applications
- 1996
-
In: 1996 Proceedings 46th Electronic Components and Technology Conference. ; , s. 259-263
-
Conference paper (peer-reviewed)abstract
- Increased throughput and flexibility requirements in large-scale electronic equipment create needs for increased interconnection density capacity and re-configurability. The growing demand for new broadband interactive telecom and computer services is expected to enforce this development, which presents a challenge to traditional electronic interconnection techniques and an opportunity for new optical solutions, provided that the cost of introduction of the optical technology is affordable for both system operators and service users. The authors describe a complete sub-system of parallel optical interconnects (i.e., a total solution including the link itself and the equipment practice supporting the link) which exhibits both cost and performance benefits compared to a pure electrical or a serial optical solution.
|
|
| 5. |
|
|
| 6. |
- Ackerman, I. N., et al.
(author)
-
Substantial rise in the lifetime risk of primary total knee replacement surgery for osteoarthritis from 2003 to 2013: an international, population-level analysis
- 2017
-
In: Osteoarthritis and Cartilage. - : Elsevier BV. - 1063-4584. ; 25:4, s. 455-461
-
Journal article (peer-reviewed)abstract
- Objective: To estimate and compare the lifetime risk of total knee replacement surgery (TKR) for osteoarthritis (OA) between countries, and over time. Method: Data on primary TKR procedures performed for OA in 2003 and 2013 were extracted from national arthroplasty registries in Australia, Denmark, Finland, Norway and Sweden. Life tables and population data were also obtained for each country. Lifetime risk of TKR was calculated for 2003 and 2013 using registry, life table and population data. Results: Marked international variation in lifetime risk of TKR was evident, with females consistently demonstrating the greatest risk. In 2013, Finland had the highest lifetime risk for females (22.8%, 95% CI 22.5-23.1%) and Australia had the highest risk for males (15.4%, 95% CI 15.1-15.6%). Norway had the lowest lifetime risk for females (9.7%, 95% CI 9.5-9.9%) and males (5.8%, 95% CI 5.6-5.9%) in 2013. All countries showed a significant rise in lifetime risk of TKR for both sexes over the 10-year study period, with the largest increases observed in Australia (females: from 13.6% to 21.1%; males: from 9.8% to 15.4%). Conclusions: Using population-based data, this study identified significant increases in the lifetime risk of TKR in all five countries from 2003 to 2013. Lifetime risk of TKR was as high as 1 in 5 women in Finland, and 1 in 7 males in Australia. These risk estimates quantify the healthcare resource burden of knee OA at the population level, providing an important resource for public health policy development and healthcare planning. (C) 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.
|
|
| 7. |
- Badawy, Mona, et al.
(author)
-
Hospital volume and the risk of revision in Oxford unicompartmental knee arthroplasty in the Nordic countries -an observational study of 14,496 cases
- 2017
-
In: BMC Musculoskeletal Disorders. - : Springer Science and Business Media LLC. - 1471-2474. ; 18:1
-
Journal article (peer-reviewed)abstract
- Background: High procedure volume and dedication to unicompartmental knee arthroplasty (UKA) has been suggested to improve revision rates. This study aimed to quantify the annual hospital volume effect on revision risk in Oxfordu? nicompartmental knee arthroplasty in the Nordic countries. Methods: 14,496 cases of cemented medial Oxford III UKA were identified in 126 hospitals in the four countries included in the Nordic Arthroplasty Register Association (NARA) database from 2000 to 2012. Hospitals were divided by quartiles into 4 annual procedure volume groups (≤11, 12-23, 24-43 and ≥44). The outcome was revision risk after 2 and 10 years calculated using Kaplan Meier method. Multivariate Cox regression analysis was used to assess the Hazard Ratio (HR) of any revision due to specific reasons with 95% confidence intervals (CI). Results: The implant survival was 80% at 10 years in the volume group ≤11 procedures per year compared to 83% in other volume groups. The HR adjusted for age category, sex, year of surgery and nation was 0.87 (95% CI: 0.76-0.99, p = 0.036) for the group 12-23 procedures per year, 0.78 (95% CI: 0.68-0.91, p = 0.002) for the group 24-43 procedures per year and 0.82 (95% CI: 0.70-0.94, p = 0.006) for the group ≥44 procedures per year compared to the low volume group. Log-rank test was p = 0.003. The risk of revision for unexplained pain was 40-50% higher in the low compared with other volume groups. Conclusion: Low volume hospitals performing ≤11 Oxford III UKAs per year were associated with an increased risk of revision compared to higher volume hospitals, and unexplained pain as revision cause was more common in low volume hospitals.
|
|
| 8. |
- Irmola, Tero, et al.
(author)
-
Association between fixation type and revision risk in total knee arthroplasty patients aged 65 years and older : a cohort study of 265,877 patients from the Nordic Arthroplasty Register Association 2000–2016
- 2021
-
In: Acta Orthopaedica. - : Medical Journals Sweden AB. - 1745-3674 .- 1745-3682. ; 92:1, s. 91-96
-
Journal article (peer-reviewed)abstract
- Background and purpose — The population of the Nordic countries is aging and the number of elderly patients undergoing total knee arthroplasty (TKA) is also expected to increase. Reliable fixation methods are essential to avoid revisions. We compared the survival of different TKA fixation concepts with cemented fixation as the gold standard. Patients and methods — We used data from the Nordic Arthroplasty Register Association (NARA) database of 265,877 unconstrained TKAs performed for patients aged ≥ 65 years with primary knee osteoarthritis between 2000 and 2016. Kaplan–Meier (KM) survival analysis with 95% confidence intervals (CI) and the Cox multiple-regression model were used to compare the revision risk of the fixation methods. Results — Cemented fixation was used in 243,166 cases, uncemented in 8,000, hybrid (uncemented femur with cemented tibia) in 14,248, and inverse hybrid (cemented femur with uncemented tibia) fixation in 463 cases. The 10-year KM survivorship (95% CI) of cemented TKAs was 96% (96 − 97), uncemented 94% (94 − 95), hybrid 96% (96 − 96), and inverse hybrid 96% (94 − 99), respectively. Uncemented TKA was associated with increased risk of revision compared with the cemented TKA; the adjusted hazard ratio was 1.3 (95% CI 1.1 − 1.4). Interpretation — Cemented, hybrid, and inverse hybrid TKAs showed 10-year survival rates exceeding 95%. Uncemented fixation was associated with an increased risk of revision in comparison with cemented fixation. As both hybrid and inverse hybrid fixation were used in only a limited number of TKAs, indicating possibility of selection bias in their favor, cemented TKA still remains the gold standard, as it works reliably in the hands of many.
|
|
| 9. |
- Irmola, Tero, et al.
(author)
-
Impact of the Nordic Arthroplasty Register Association (NARA) collaboration on demographics, methods and revision rates in knee arthroplasty : a register-based study from NARA 2000–2017
- 2022
-
In: Acta Orthopaedica. - : Medical Journals Sweden AB. - 1745-3674 .- 1745-3682. ; 93, s. 866-873
-
Journal article (peer-reviewed)abstract
- Background and purpose — We have previously observed differences in treatment and outcome of knee arthroplasties in the Nordic countries. To evaluate the impact of Nordic collaboration in the last 15 years we aimed to compare patient demographics, methods, and revision rates in primary knee arthroplasties among the 4 Nordic countries. Patients and methods — We included 535,051 primary knee arthroplasties reported 2000–2017 from the Nordic Arthroplasty Register Association (NARA) database. Kaplan–Meier analysis (KM) and restricted mean survival time (RMST) analysis were used to evaluate the cumulative revision rate (CRR) and RMST estimates with 95% confidence intervals (CI) and to compare countries in relation to risk of revision for any reason. Results — After 2010, the increase in incidence of knee arthroplasty plateaued in Sweden and Denmark but contin-ued to increase in Finland and Norway. In 2017 the incidence was highest in Finland with 226 per 105 person-years, while it was less than 150 per 105 in the 3 other Nordic coun-tries. In total knee arthroplasties performed for osteoarthri-tis (OA), overall CRR at 15 years for revision due to any reason was higher in Denmark (CRR 9.6%, 95% CI 9.2−10), Norway (CRR 9.1%, CI 8.7−9.5), and Finland (CRR 7.0%, CI 6.8−7.3) compared with Sweden (CRR 6.6%, CI 6.4−6.8). There were differences among the countries in use of implant brand and type, fixation, patellar component, and use of unicompartmental knee arthroplasty. Interpretation — We evinced a slowing growth of incidence of knee arthroplasties in the Nordic countries after 2010 with Finland having the highest incidence. We also noted substantial differences among the 4 Nordic countries, with Sweden having a lower risk of revision than the other countries. No impact of NARA could be demonstrated and CRR did not improve over time.
|
|
| 10. |
- Klöckner, M., et al.
(author)
-
Bettan – Industrial robot and application for Finja Exakt build system
- 2023
-
In: Proceedings of the 40th International Symposium on Automation and Robotics in Construction, ISARC 2023. - 2413-5844. - 9780645832204 ; , s. 86-93
-
Conference paper (peer-reviewed)abstract
- This paper reports on efforts to create a robotized construction build system, based on the Finja Exakt manual build system. The equipment used is a generic off-the-shelf industrial arm robot integrated with a spindle crane carrier for mobility. The approach offers technical, safety and usability challenges as well as integration and business challenges for placing a generic industrial robot onsite as part of an automation solution. The question we address is if a robotized build system is a viable niche for industrial robotics in construction. In this paper the question is partially answered by reporting on an industrial robot partially adopted for work on a construction site with evaluation of individual processes in a build system.
|
|
