1. |
- Aad, G., et al.
(author)
-
Readiness of the ATLAS Tile Calorimeter for LHC collisions
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:4, s. 1193-1236
-
Journal article (peer-reviewed)abstract
- The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully operational since 2007 and the detector has successfully collected data from the LHC single beams in 2008 and first collisions in 2009. This paper gives an overview of the Tile Calorimeter performance as measured using random triggers, calibration data, data from cosmic ray muons and single beam data. The detector operation status, noise characteristics and performance of the calibration systems are presented, as well as the validation of the timing and energy calibration carried out with minimum ionising cosmic ray muons data. The calibration systems' precision is well below the design value of 1%. The determination of the global energy scale was performed with an uncertainty of 4%.
|
|
2. |
- Aad, G., et al.
(author)
-
The ATLAS Inner Detector commissioning and calibration
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 787-821
-
Journal article (peer-reviewed)abstract
- The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took part in data-taking with single LHC beams and cosmic rays. The initial detector operation, hardware commissioning and in-situ calibrations are described. Tracking performance has been measured with 7.6 million cosmic-ray events, collected using a tracking trigger and reconstructed with modular pattern-recognition and fitting software. The intrinsic hit efficiency and tracking trigger efficiencies are close to 100%. Lorentz angle measurements for both electrons and holes, specific energy-loss calibration and transition radiation turn-on measurements have been performed. Different alignment techniques have been used to reconstruct the detector geometry. After the initial alignment, a transverse impact parameter resolution of 22.1 +/- 0.9 mu m and a relative momentum resolution sigma (p) /p=(4.83 +/- 0.16)x10(-4) GeV(-1)xp (T) have been measured for high momentum tracks.
|
|
3. |
- Aad, G., et al.
(author)
-
The ATLAS Simulation Infrastructure
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 823-874
-
Journal article (peer-reviewed)abstract
- The simulation software for the ATLAS Experiment at the Large Hadron Collider is being used for large-scale production of events on the LHC Computing Grid. This simulation requires many components, from the generators that simulate particle collisions, through packages simulating the response of the various detectors and triggers. All of these components come together under the ATLAS simulation infrastructure. In this paper, that infrastructure is discussed, including that supporting the detector description, interfacing the event generation, and combining the GEANT4 simulation of the response of the individual detectors. Also described are the tools allowing the software validation, performance testing, and the validation of the simulated output against known physics processes.
|
|
4. |
- Aad, G., et al.
(author)
-
Studies of the performance of the ATLAS detector using cosmic-ray muons
- 2011
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 71:3
-
Journal article (peer-reviewed)abstract
- Muons from cosmic-ray interactions in the atmosphere provide a high-statistics source of particles that can be used to study the performance and calibration of the ATLAS detector. Cosmic-ray muons can penetrate to the cavern and deposit energy in all detector subsystems. Such events have played an important role in the commissioning of the detector since the start of the installation phase in 2005 and were particularly important for understanding the detector performance in the time prior to the arrival of the first LHC beams. Global cosmic-ray runs were undertaken in both 2008 and 2009 and these data have been used through to the early phases of collision data-taking as a tool for calibration, alignment and detector monitoring. These large datasets have also been used for detector performance studies, including investigations that rely on the combined performance of different subsystems. This paper presents the results of performance studies related to combined tracking, lepton identification and the reconstruction of jets and missing transverse energy. Results are compared to expectations based on a cosmic-ray event generator and a full simulation of the detector response.
|
|
5. |
- Aad, G., et al.
(author)
-
Commissioning of the ATLAS Muon Spectrometer with cosmic rays
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 875-916
-
Journal article (peer-reviewed)abstract
- The ATLAS detector at the Large Hadron Collider has collected several hundred million cosmic ray events during 2008 and 2009. These data were used to commission the Muon Spectrometer and to study the performance of the trigger and tracking chambers, their alignment, the detector control system, the data acquisition and the analysis programs. We present the performance in the relevant parameters that determine the quality of the muon measurement. We discuss the single element efficiency, resolution and noise rates, the calibration method of the detector response and of the alignment system, the track reconstruction efficiency and the momentum measurement. The results show that the detector is close to the design performance and that the Muon Spectrometer is ready to detect muons produced in high energy proton-proton collisions.
|
|
6. |
- Hudson, Lawrence N, et al.
(author)
-
The database of the PREDICTS (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems) project
- 2017
-
In: Ecology and Evolution. - : John Wiley & Sons. - 2045-7758. ; 7:1, s. 145-188
-
Journal article (peer-reviewed)abstract
- The PREDICTS project-Projecting Responses of Ecological Diversity In Changing Terrestrial Systems (www.predicts.org.uk)-has collated from published studies a large, reasonably representative database of comparable samples of biodiversity from multiple sites that differ in the nature or intensity of human impacts relating to land use. We have used this evidence base to develop global and regional statistical models of how local biodiversity responds to these measures. We describe and make freely available this 2016 release of the database, containing more than 3.2 million records sampled at over 26,000 locations and representing over 47,000 species. We outline how the database can help in answering a range of questions in ecology and conservation biology. To our knowledge, this is the largest and most geographically and taxonomically representative database of spatial comparisons of biodiversity that has been collated to date; it will be useful to researchers and international efforts wishing to model and understand the global status of biodiversity.
|
|
7. |
|
|
8. |
- Johnsson, Martin, et al.
(author)
-
Genetics of tibia bone properties of crossbred commercial laying hens in different housing systems
- 2023
-
In: G3. - : Oxford University Press. - 2160-1836. ; 13:2
-
Journal article (peer-reviewed)abstract
- Osteoporosis and bone fractures are a severe problem for the welfare of laying hens, with genetics and environment, such as housing system, each making substantial contributions to bone strength. In this work, we performed genetic analyses of bone strength, bone mineral density, and bone composition, as well as body weight, in 860 commercial crossbred laying hens from 2 different companies, kept in either furnished cages or floor pens. We compared bone traits between housing systems and crossbreds and performed a genome-wide association study of bone properties and body weight. As expected, the 2 housing systems produced a large difference in bone strength, with layers housed in floor pens having stronger bones. These differences were accompanied by differences in bone geometry, mineralization, and chemical composition. Genome scans either combining or independently analyzing the 2 housing systems revealed no genome-wide significant loci for bone breaking strength. We detected 3 loci for body weight that were shared between the housing systems on chromosomes 4, 6, and 27 (either genome-wide significant or suggestive) and these coincide with associations for bone length. In summary, we found substantial differences in bone strength, content, and composition between hens kept in floor pens and furnished cages that could be attributed to greater physical activity in pen housing. We found little evidence for large-effect loci for bone strength in commercial crossbred hens, consistent with a highly polygenic architecture for bone strength in the production environment. The lack of consistent genetic associations between housing systems in combination with the differences in bone phenotypes could be due to gene-by-environment interactions with housing system or a lack of power to detect shared associations for bone strength.
|
|
9. |
- Alvarez-Lloret, Pedro, et al.
(author)
-
Effects of 3,3',4,4',5-pentachlorobiphenyl (PCB126) on vertebral bone mineralization and on thyroxin and vitamin D levels in Sprague-Dawley rats
- 2009
-
In: Toxicology Letters. - : Elsevier BV. - 0378-4274 .- 1879-3169. ; 187:2, s. 63-68
-
Journal article (peer-reviewed)abstract
- The aim of the present study is to use Fourier transform infrared spectrometry (FTIR), and transmission electron microscopy (TEM) techniques, to make a more detailed description of toxic effects of 3,3',4,4',5-pentachlorobiphenyl (PCB126) on bone tissue at the microstructural and at the molecular level as a result of an altered bone metabolism. We have analysed potential changes on vitamin D and thyroxin serum levels since these hormones represent endocrine endpoints that are critical for bone growth and development. For this purpose Sprague-Dawley rats were exposed (n=10) to PCB126 (i.p.) for 3 months (total dose, 384microg/kg bodyweight), while control rats (n=10) were injected with corn oil (vehicle). Results from FTIR showed that vertebrae from the exposed rats had an overall lower degree of mineralization (-8.5%; p<0.05) compared with the controls. In addition, results from peripheral quantitative computed tomography (pQCT) analyses showed significant increases in the trabecular bone mineral density (+12%; p<0.05) in the exposed group compared with the controls. The TEM analyses also showed an alteration in the crystallinity properties of vertebral bone mineral with a significant decrease in the size and crystallinity of apatite crystal forming the bone tissue in the exposed vs. non-exposed rats. Serum analysis revealed lower levels of thyroid hormones, FT4 (-42%; p<0.005), TT4 (-26%; p<0.005), and vitamin D (-21%; p<0.005) in exposed group compared to control animals. The complementary techniques (TEM and FTIR) used in this study have revealed insights into possible bone mineralization alteration due to PCB126 exposure. The lowering of both the thyroxin and vitamin D serum levels might be an underlying explanation for the observed effects on bone mineralization.
|
|
10. |
- García-Iruela, Alberto, et al.
(author)
-
Effect of Degradation on Wood Hygroscopicity : The Case of a 400-Year-Old Coffin
- 2020
-
In: Forests. - : MDPI. - 1999-4907. ; 11:7, s. 1-15
-
Journal article (peer-reviewed)abstract
- The hygroscopicity and thermodynamic properties of Pinus sylvestris L. wood from a coffin allegedly holding the remains of famous Spanish author Miguel de Cervantes Saavedra (1547–1616) were studied using the 15 °C and 35 °C isotherms fitted to the Guggenheim–Anderson–de Boer model and comparing them with the isotherms of recently felled wood of the same species. In addition, using infrared spectroscopy (FTIR-ATR) and X-ray diffractograms, the functional groups were determined and the crystallinity and organization of the cell wall components were analyzed. The absence of the 1740 cm−1 group indicates hemicellulose degradation in the archaeological wood, and the X-ray diffractograms show a considerable decrease in cellulose crystallinity and disorganization of the cellulose crystallites. The greater availability of active –OH groups means that the archaeological wood isotherms are above the juvenile and mature wood isotherms, and therefore the thermodynamic balance in the sorption of the archaeological wood is greater.
|
|