1. |
- Smith, P B, et al.
(author)
-
Cultural values, sources of guidance, and their relevance to managerial behavior - A 47-nation study
- 2002
-
In: Journal of Cross-Cultural Psychology. - : Sage Publications. - 0022-0221 .- 1552-5422. ; 33:2, s. 188-208
-
Journal article (peer-reviewed)abstract
- Data are presented showing how middle managers in 47 countries report handling eight specific work events. The data are used to test the ability of cultural value dimensions derived from the work of Hofstede. Trompenaars, and Schwartz to predict the specific sources of guidance on which managers rely. Focusing on sources of guidance is expected to provide a more precise basis than do generalized measures of values for understanding the behaviors that prevail within different cultures. Values are strongly predictive of reliance on those sources of guidance that are relevant to vertical relationships within organizations. Hock ever, values are less successful in predicting reliance on peers and on more tacit sources of guidance. Explaining national differences in these neglected aspects of organizational processes will require greater sensitivity to the culture-specific contexts within which they occur.
|
|
2. |
|
|
3. |
- Kokko, K., et al.
(author)
-
Atomistic study of surfaces and interfaces of Fe-Cr and Fe-Cr-Al alloys
- 2013
-
In: Physical and numerical simulation of materials processing VII. - : Trans Tech Publications Inc.. - 9783037857281 ; , s. 728-733
-
Conference paper (peer-reviewed)abstract
- Surface and interface properties of Fe-Cr, Fe-Al, and Fe-Cr-Al are studied using Exact Muffin-Tin Orbitals and Monte Carlo methods and with x-ray photoelectron and Auger electron techniques. Surface composition is investigated as a function of oxidation (heating) time. Hard x ray photoelectron spectroscopy (HAXPES) is used to scan non destructively the compositions below the surface. It is found that Cr boosts the Al segregation to the surface.
|
|
4. |
- Kuronen, A., et al.
(author)
-
Segregation, precipitation, and alpha-alpha ' phase separation in Fe-Cr alloys
- 2015
-
In: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 92:21
-
Journal article (peer-reviewed)abstract
- Iron-chromium alloys, the base components of various stainless steel grades, have numerous technologically and scientifically interesting properties. However, these features are not yet sufficiently understood to allow their full exploitation in technological applications. In this work, we investigate segregation, precipitation, and phase separation in Fe-Cr systems analyzing the physical mechanisms behind the observed phenomena. To get a comprehensive picture of Fe-Cr alloys as a function of composition, temperature, and time the present investigation combines Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complementary methods have to be used. Using the exact muffin-tin orbitals method with the coherent potential approximation (CPA-EMTO) the effective chemical potential as a function of Cr content (0-15 at. % Cr) is calculated for a surface, second atomic layer, and bulk. At similar to 10 at. % Cr in the alloy the reversal of the driving force of a Cr atom to occupy either bulk or surface sites is obtained. The Cr-containing surfaces are expected when the Cr content exceeds similar to 10 at. %. The second atomic layer forms about a 0.3 eV barrier for the migration of Cr atoms between the bulk and surface atomic layer. To get information on Fe-Cr in larger scales we use semiempirical methods. However, for Cr concentration regions less than 10 at. %, the ab initio (CPA-EMTO) result of the important role of the second atomic layer to the surface is not reproducible from the large-scale Monte Carlo molecular dynamics (MCMD) simulation. On the other hand, for the nominal concentration of Cr larger than 10 at. % the MCMD simulations show the precipitation of Cr into isolated pockets in bulk Fe-Cr and the existence of the upper limit of the solubility of Cr into Fe layers in Fe/Cr layer systems. For high Cr concentration alloys the performed spectroscopic measurements support the MCMD simulations. Hard x-ray photoelectron spectroscopy and Auger electron spectroscopy investigations were carried out to explore Cr segregation and precipitation in the Fe/Cr double layer and Fe0.95Cr0.05 and Fe0.85Cr0.15 alloys. Initial oxidation of Fe-Cr was investigated experimentally at 10(-8) Torr pressure of the spectrometers showing intense Cr2O3 signal. Cr segregation and the formation of Cr-rich precipitates were traced by analyzing the experimental atomic concentrations and chemical shifts with respect to annealing time, Cr content, and kinetic energy of the exited electron.
|
|
5. |
- Pitkänen, H., et al.
(author)
-
Ab initio study of the phase stability in paramagnetic duplex steel alloys
- 2009
-
In: Physical Review B. Condensed Matter and Materials Physics. - : APS. - 1098-0121 .- 1550-235X. ; 79:2
-
Journal article (peer-reviewed)abstract
- Duplex stainless steels have many superior properties compared to conventional steels, this being mainly due to their microstructure containing approximately equal amount of ferrite and austenite phases formed by iron, chromium (or Cr equivalent), and nickel (or Ni equivalent). Using computational methods based on first-principles theories, the phase stability of paramagnetic Fe1-c-nCrcNin alloys (0.12 <= c <= 0.32 and 0.04 <= n <= 0.32) at high temperatures (greater than or similar to 1000 K) is addressed. It is shown that the stabilization of the ferrite-austenite two-phase field in duplex steels is a result of complex interplay of several competing phenomena. Taking into account only the formation energies yields a complete phase separation, strongly overestimating the two-phase region. The formation energies are calculated to be lower for the austenite than for the ferrite, meaning that the configurational entropy has a more significant impact on the stability field of the austenitic phase. The magnetic and vibrational free energies have opposite effects on the phase stability. Namely, the magnetic entropy favors the ferrite phase, whereas the vibrational free energy stabilizes the austenite phase. Combining the formation energies with the magnetic, vibrational, and configurational free energies, a region of coexistence between the two phases is obtained, in line with former thermodynamic assessments as well as with experimental observations.
|
|
6. |
- Pitkänen, H., et al.
(author)
-
Ab initio study of the surface properties of austenitic stainless steel alloys
- 2013
-
In: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 609, s. 190-194
-
Journal article (peer-reviewed)abstract
- Using ab initio calculations we investigated the surface energies of paramagnetic Fe1-c-nCrcNin random alloys within the concentration range of 0.12 <= c <= 032 and 0.04 <= n <= 0.32. These alloys crystallize mainly in the face centred cubic (fcc) structure and constitute the main building blocks of austenitic stainless steels. It is shown that all alloys have the lowest surface energies along the most close packed crystal orientation, namely the fcc (111) surfaces. The amount of Ni seems to have little effect on the surface energy, while almost all composition-driven change may be attributed to the changes in the Cr content. Within the studied compositional range, the change of the surface energy with the composition is of the order of 10%. Trends of the surface energy can be related to the magnetic structure of surfaces. Using the total energy as a function of the concentration, we determine the effective chemical potentials in bulk and at the surface, which can be used to estimate the surface segregation energies.
|
|
7. |
- Punkkinen, Marko P. J., et al.
(author)
-
Core-level shifts of InP(100)(2 x 4) surface : Theory and experiment
- 2009
-
In: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 603:16, s. 2664-2668
-
Journal article (peer-reviewed)abstract
- Surface core-level shifts (SCLSs) of the (2 x 4)-reconstructed InP(100) surface with the established mixed In-P dimer structure have been investigated by first-principles calculations and photoelectron spectroscopy. Theoretical values were calculated using both the local density approximation (LDA) and the generalized gradient approximation (GGA) for the exchange-correlation energy functional. The obtained theoretical values are quite similar within both approximations. The found differences originate in the tiny structural differences. It is concluded that the expansion or contraction of the crystal lattice has smaller effect on the SCLSs than the geometrical details of the reconstruction, which suggests that the Madelung potential has the dominant effect on the SCLSs. The results support the presence of a P 2p peak at higher binding energy (BE) compared to bulk peak, as proposed with recent measurements [P. Laukkamen, J. Pakarinen, M. Ahola-Tuomi, M. Kuzmin, R. E. Perala, I. J. Vayrynen, A. Tukiainen, V. Rimpilainen, M. Pessa, M. Adell, J. Sadowski, Surf. Sci. 600 (2006) 3022], and reveal several hitherto not reported SCLSs. The calculated SCLSs reproduce the measured spectra within reasonable accuracy. Furthermore, the atomic origins of the InP(100)(2 x 4) SCLSs are solved. In particular, it is shown that the lowest SCLS of P 2p, of the InP(100)(2 x 4) arises from the topmost In-P dimers.
|
|
8. |
- Uusitalo, H., et al.
(author)
-
Improved systemic safety and risk-benefit ratio of topical 0.1% timolol hydrogel compared with 0.5% timolol aqueous solution in the treatment of glaucoma
- 2006
-
In: Graefe's Archives for Clinical and Experimental Ophthalmology. - : Springer Science and Business Media LLC. - 0721-832X .- 1435-702X. ; 244:11, s. 1491-1496
-
Journal article (peer-reviewed)abstract
- The purpose of the study was to compare the systemic safety and risk-benefit ratio of 0.1% timolol hydrogel and 0.5% aqueous timolol eye drops in the treatment of glaucoma. An 8-week randomised, double-blind, cross-over, multicentre study. A total of 25 patients with primary open-angle glaucoma, exfoliation glaucoma, or ocular hypertension was enrolled. After completing a wash-out period, patients were randomly chosen to receive either 0.1% timolol hydrogel once daily or 0.5% aqueous timolol eye drops twice daily. Intraocular pressure and heart rate during rest and exercise, head-up tilt test results, spirometry readings, and plasma concentrations of timolol were recorded. The risk-benefit ratio was determined by calculating the ratio between several heart rate endpoints and the change in intraocular pressure (IOP). The mean drug-induced change in the peak heart rate during exercise was -13.5 beats/min (SD 7.6) in the 0.5% aqueous timolol group and -5.1 beats/min (SD 6.7) in the 0.1% timolol hydrogel group (P < 0.001; 95% CI 4.06-12.18). There was no significant difference in the IOP-reducing efficacy between these compounds. The risk-benefit ratio was significantly improved when 0.1% timolol hydrogel was used, compared with 0.5% aqueous timolol in the exercise test. In the head-up tilt test the risk-benefit ratio was significantly improved at rest (P < 0.05), at 1 min (P < 0.05) and at 5 min (P < 0.001) after patients had received 0.1% timolol hydrogel. There were, however, no differences in spirometry readings. After patients had been treated with 0.1% timolol hydrogel, plasma concentrations of timolol were 1/6 (at peak) and 1/50 (at trough) of those of 0.5% aqueous timolol. Drug-induced changes in the peak heart rate, and head-up tilt test results as well as plasma concentrations of timolol, were significantly more pronounced after treatment with 0.5% aqueous timolol than with 0.1% timolol hydrogel. Because of the statistically similar IOP-reducing efficacy of these formulations the risk-benefit ratio was significantly improved when patients used 0.1% timolol hydrogel instead of 0.5% aqueous timolol.
|
|
9. |
|
|