| 1. |
- Mahidhar, Gorla Durga Pawan, et al.
(author)
-
Dielectric properties of mixed mineral and synthetic ester oil
- 2020
-
In: IET Science, Measurement & Technology. - : Institution of Engineering and Technology (IET). - 1751-8822 .- 1751-8830. ; 14:9, s. 704-714
-
Journal article (peer-reviewed)abstract
- The dielectric properties of 20% synthetic ester oil mixed with mineral oil were studied for its potential applications as an insulator in transformers. The corona inception voltage of mixed oil under AC and DC voltages was measured by the ultra-high frequency (UHF) technique. A statistical study of the breakdown voltage of mixed oil under AC, DC and standard lightning impulse voltages was carried out to obtain a database which would be useful for designing transformer insulation. Further, the mixture was subjected to continuous breakdown studies under AC voltage with lightning impulse voltages, at regular intervals and characterised through measurement of interfacial tension, flash point, ionic mobility as well as UV-vis spectroscopy and frequency-domain spectroscopy studies to understand the liquid's chemical stability. The results of the study have shown that the mixture was stable even after several breakdowns. The ionic mobility and polarisation current have increased, indicating higher losses in the oil. UHF signal energy analysis and phase-resolved partial discharge analysis have revealed a reduction in discharge activity with mixed oils.
|
|
| 2. |
|
|
| 3. |
- Somasundaram Karthikeyan, Amizhtan, et al.
(author)
-
Investigation on electrical, thermal and mechanical properties of thermally aged pressboard impregnated with mixed mineral oil and synthetic ester fluid
- 2020
-
In: IET Science, Measurement & Technology. - : Institution of Engineering and Technology (IET). - 1751-8822 .- 1751-8830. ; 14:10, s. 1029-1036
-
Journal article (peer-reviewed)abstract
- The proposed study compares the electrical, thermal and mechanical performances of thermally aged cellulose pressboard material impregnated in mineral oil, synthetic ester fluid and mixed oil. The electrical insulation characteristics of oil-impregnated pressboard (OIP) are studied by means of surface discharge inception voltage (SDIV) using an ultra-high frequency technique and surface potential measurement analysis. It indicates that OIP aged in mineral oil has higher surface potential due to higher charge trap density compared to that of the mixed oil and synthetic ester fluid. Mechanical and thermal characteristics of the aged OIP are studied by means of tensile strength measurement and thermo-gravimetric analysis, respectively. The change in the chemical composition of OIP is studied by means of laser-induced breakdown spectroscopy, which indicates lower plasma temperature with mineral oil-based OIP indicating higher degradation state. To further understand the microscopic structure of the thermally aged OIP in different oils, scanning electron microscopy and X-ray diffraction studies have been performed. The pressboard thermally aged in synthetic ester fluid and the mixed oil has better electrical, thermal and mechanical properties as compared with the pressboard aged in mineral oil.
|
|
