1. |
- Al-Zoubi, N., et al.
(author)
-
Assessing the Exact Muffin-Tin Orbitals method for the Bain path of metals
- 2017
-
In: Philosophical Magazine. - : Taylor & Francis. - 1478-6435 .- 1478-6443. ; 97:15, s. 1243-1264
-
Journal article (peer-reviewed)abstract
- We scrutinise the muffin-tin approximation and the screening within the framework of the Exact Muffin-Tin Orbitals method in the case of cubic and tetragonal crystal symmetries. Systematic total energy calculations are carried out for the Bain path including the body-centred cubic and face-centred cubic structures for a set of simple and transition metals. The present converged results in terms of potential sphere radius (S) and hard sphere radius (b) are in good agreement with previous theoretical calculations. We demonstrate that for all structures considered here, potential sphere radii around and slightly larger than the average Wigner–Seitz radius (w) yield accurate total energy results whereas S values smaller than w give large errors. It is shown that for converged total energies hard spheres with radii b = 0.7–0.8w should be used for an efficient screening within real space clusters consisting typically of 70–90 lattice sites. The less efficient convergence of the total energy in the case of small hard spheres is ascribed to the delocalisation of the screened spherical waves, which leads to inaccurate interstitial overlap matrix. The above conclusions are not significantly affected by the volume of the system.
|
|
2. |
- Al-Zoubi, Noura, et al.
(author)
-
Elastic properties of 4d transition metal alloys : Values and trends
- 2019
-
In: Computational materials science. - : ELSEVIER SCIENCE BV. - 0927-0256 .- 1879-0801. ; 159, s. 273-280
-
Journal article (peer-reviewed)abstract
- Using the Exact Muffin-Tin Orbitals method within the Perdew-Burke-Ernzerhof exchange-correlation approximation for solids and solid surfaces (PBEso1), we study the single crystal elastic constants of 4d transition metals (atomic number Z between 39 and 47) and their binary alloys in the body centered cubic (bcc) and face centered cubic (fcc) structures. Alloys between the first neighbors Z(Z + 1) and between the second neighbors Z(Z + 2) are considered. The lattice constants, bulk moduli and elastic constants are found in good agreement with the available experimental and theoretical data. It is shown that the correlation between the relative tetragonal shear elastic constant C-fcc'-2C(bcc)' and the structural energy difference between the fcc and bcc lattices Delta E is superior to the previously considered models. For a given crystal structure, the equiatomic Z(Z + 2) alloys turn out to have similar structural and elastic properties as the pure elements with atomic number (Z + 1). Furthermore, alloys with composition Z(1-x)(Z + 2)(x) possess similar properties as Z(1-2x)(Z + 1)(2x). The present theoretical data on the structural and the elastic properties of 4d transition metal alloys provides consistent input for coarse scale modeling of material properties.
|
|
3. |
- Al-Zoubi, Noura, et al.
(author)
-
Influence of manganese on the bulk properties of Fe-Cr-Mn alloys : a first-principles study
- 2014
-
In: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 89:12, s. 125702-
-
Journal article (peer-reviewed)abstract
- We investigate the effect of manganese on lattice stability and magnetic moments of paramagnetic Fe-Cr-Mn steel alloys along the Bain path connecting the body-centered cubic (bcc) and face-centered cubic (fcc) structures. The calculations are carried out using the ab initio exact muffin-tin orbital method, in combination with the coherent potential approximation, and the paramagnetic phase is modeled by the disordered local magnetic moment scheme. For all Fe-Cr-Mn alloys considered here, the local magnetic moments on Fe atoms have the minimum values for the fcc structure and the maximum values for the bcc structure, whereas the local magnetic moments on Mn have almost the same value along the constant-volume Bain path. Our results show that Mn addition to paramagnetic Fe-Cr solid solution stabilizes the bcc structure. However, when considering the paramagnetic fcc phase relative to the ferromagnetic bcc ground state, then Mn turns out to be a clear fcc stabilizer, in line with observations.
|
|
4. |
- Choi, Young Won, et al.
(author)
-
Predicting the stacking fault energy of austenitic Fe-Mn-Al (Si) alloys
- 2020
-
In: Materials & design. - : ELSEVIER SCI LTD. - 0264-1275 .- 1873-4197. ; 187
-
Journal article (peer-reviewed)abstract
- Aluminum and silicon are common alloying elements for tuning the stacking fault energy (SFE) of high Mn steels. Today the theoretical investigations on the Fe-Mn-Al/Si systems using Density Functional Theory (DFT) are very scarce. In the present study, we employ a state-of-the-art longitudinal spin fluctuations (LSFs) model in combination with DFT for describing the magnetic effects in Fe-Mn based alloys at finite temperature. We find that the traditional DFT-floating spin results fail to explain the experimental trends. However, the DFT-LSFs approach properly captures the Al-induced increase and Si-induced decrease of the SFE of the base alloy in line with the room-temperature observations. This finding highlights the importance of LSFs in describing the Al/Si effects on the SEE of Fe-Mn based alloys. We point out that the effects of the non-magnetic Al and Si additions on the SEE are in fact determined by the magnetic state of the host matrix. In addition, we estimate the role of carbon addition in the alloying effects of Al and Si. The present results provide a convenient pathway to access the important mechanical parameters for designing advanced high-strength alloys.
|
|
5. |
- Csire, Gabor, et al.
(author)
-
First-principles approach to thin superconducting slabs and heterostructures
- 2016
-
In: Physical Review B. - : American Physical Society. - 2469-9950 .- 2469-9969. ; 94:14
-
Journal article (peer-reviewed)abstract
- We present a fully first-principles method for superconducting thin films. The layer dependent phonon spectrum is calculated to determine the layer dependence of the electron-phonon coupling for such systems, which is coupled to the Kohn-Sham-Bogoliubov-de Gennes equations, and it is solved in a parameter-free way. The theory is then applied to different surface facets of niobium slabs and to niobium-gold heterostructures. We investigate the dependence of the transition temperature on the thickness of the slabs and the inverse proximity effect observed in thin superconducting heterostructures.
|
|
6. |
- Dastanpour Hosseinabadi, Esmat, et al.
(author)
-
An assessment of the Al50Cr21-xMn17+xCo12 (x=0, 4, 8) high-entropy alloys for magnetocaloric refrigeration application
- 2024
-
In: Journal of Alloys and Compounds. - : Elsevier. - 0925-8388 .- 1873-4669. ; 984
-
Journal article (peer-reviewed)abstract
- This study investigates the magnetocaloric potential of the Al50Cr21-xMn17+xCo12 (x=0, 4, 8 at%) high-entropy alloy (HEA) series using integrated experimental and theoretical approaches. Structural analysis by X-ray diffraction and scanning electron microscopy indicate a dual phase containing B2 and body-centered cubic (BCC) structures. Magnetic characterization shows an approximately linear decrease in saturation magnetization and Curie temperature with increasing Cr content. Curie temperatures calculated by Monte Carlo simulations suggest that the measured magnetic properties originate from the B2 phase rather than the BCC phase. The enhanced magnetocaloric effect with decreasing Cr content highlights the attractiveness of HEAs in magnetocaloric applications.
|
|
7. |
- Dastanpour Hosseinabadi, Esmat, et al.
(author)
-
Investigation of the metastable spinodally decomposed magnetic CrFe-rich phase in Al doped CrFeCoNi alloy
- 2023
-
In: Journal of Alloys and Compounds. - : Elsevier. - 0925-8388 .- 1873-4669. ; 939
-
Journal article (peer-reviewed)abstract
- We have conducted an in-depth study of the magnetic phase due to a spinodal decomposition of the BCC phase of a CrFe-rich composition. This magnetic phase is present after casting (arc melting) or water quenching after annealing at 1250 degrees C for 24 h but is entirely absent after annealing in the interval 900-1100 degrees C for 24 h. Its formation is favored in the temperature interval ca 450-550 degrees C and loses magnetization above 640 degrees C. This ferromagnetic-paramagnetic transition is due to a structural transformation from ferromagnetic BCC into paramagnetic sigma and FCC phases. The conclusion from measurements at different heating rates is that both the transformation leading to the increase of the magnetization due to the spinodal decomposition of the parent phase and the vanishing magnetization at 640 degrees C are diffusion controlled. (c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).
|
|
8. |
- Dastanpour Hosseinabadi, Esmat, et al.
(author)
-
On the structural and magnetic properties of Al-rich high entropy alloys : a joint experimental-theoretical study
- 2023
-
In: Journal of Physics D. - : IOP Publishing. - 0022-3727 .- 1361-6463. ; 56:1
-
Journal article (peer-reviewed)abstract
- The present work investigates how the vanadium (V) content in a series of Al50V (x) (Cr0.33Mn0.33Co0.33)((50-x)) (x = 12.5, 6.5, 3.5, and 0.5 at.%) high-entropy alloys affects the local magnetic moment and magnetic transition temperature as a step towards developing high-entropy functional materials for magnetic refrigeration. This has been achieved by carrying out experimental investigations on induction melted alloys and comparison to ab initio and thermodynamic calculations. Structural characterization by x-ray diffraction and scanning electron microscopy indicates a dual-phase microstructure containing a disordered body-centered cubic (BCC) phase and a B2 phase with long-range order, which significantly differ in the Co and V contents. Ab initio calculations demonstrate a weaker magnetization and lower magnetic transition temperature (T
|
|
9. |
- Dong, Zhihua, et al.
(author)
-
Elastic properties of paramagnetic austenitic steel at finite temperature : Longitudinal spin fluctuations in multicomponent alloys
- 2017
-
In: Physical Review B. - : American Physical Society. - 2469-9950 .- 2469-9969. ; 96:17
-
Journal article (peer-reviewed)abstract
- We propose a first-principles framework for longitudinal spin fluctuations (LSFs) in disordered paramagnetic (PM) multicomponent alloy systems and apply it to investigate the influence of LSFs on the temperature dependence of two elastic constants of PM austenitic stainless steel Fe15Cr15Ni. The magnetic model considers individual fluctuating moments in a static PM medium with first-principles-derived LSF energetics in conjunction with describing chemical disorder and randomness of the transverse magnetic component in the single-site alloy formalism and disordered local moment (DLM) picture. A temperature-sensitive mean magnetic moment is adopted to accurately represent the LSF state in the elastic-constant calculations. We make evident that magnetic interactions between an LSF impurity and the PM medium are weak in the present steel alloy. This allows gaining accurate LSF energetics and mean magnetic moments already through a perturbation from the static DLM moments instead of a tedious self-consistent procedure. We find that LSFs systematically lower the cubic shear elastic constants c' and c(44) by similar to 6 GPa in the temperature interval 300-1600 K, whereas the predominant mechanism for the softening of both elastic constants with temperature is the magneto-volume coupling due to thermal lattice expansion. We find that non-negligible local magnetic moments of Cr and Ni are thermally induced by LSFs, but they exert only a small influence on the elastic properties. The proposed framework exhibits high flexibility in accurately accounting for finite-temperature magnetism and its impact on the mechanical properties of PM multicomponent alloys.
|
|
10. |
- Dong, Zhihua, et al.
(author)
-
Influence of Mn content on the intrinsic energy barriers of paramagnetic FeMn alloys from longitudinal spin fluctuation theory
- 2019
-
In: International journal of plasticity. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0749-6419 .- 1879-2154. ; 119, s. 123-139
-
Journal article (peer-reviewed)abstract
- First-principles calculations were performed to investigate the influence of Mn content on the intrinsic energy barriers (IEBs) of paramagnetic FeMn alloys with face-centered cubic (fcc) structure. The IEBs were derived from the free energies accounting for longitudinal spin fluctuations (LSFs). LSFs are demonstrated to be important for the quantitative description of IEBs and their alloying dependencies at finite temperature. The unstable stacking and unstable twinning fault energies of the fcc phase slightly decrease with Mn content, whereas the intrinsic stacking fault energy (gamma(fcc)(isf)) is predicted to monotonically increase. This latter finding contradicts the experimentally reported, local minimum of gamma(isf) in the fcc/hexagonal close-packed (hcp) coexistence region. The partitioning of Mn during the fcc/hcp phase transition is proposed to reconcile theory and experiment. Both temperature and impurities ([C] and Cr) hardly influence the monotonic concentration dependence of gamma(fcc)(isf) but considerably alter the magnitude. The fcc/hcp interfacial energy is nearly independent of Mn concentration in contrast to the parabolic dependence predicted in thermodynamic modeling. In contrast to the fcc phase, the estimated intrinsic stacking fault energy of the ideal hcp structure monotonically decreases with Mn content and temperature. A high twinnability is predicted at 450 K within the stability field of the paramagnetic fcc Fe-Mn alloys.
|
|