| 1. |
- Sugita, S., et al.
(author)
-
The geomorphology, color, and thermal properties of Ryugu: Implications for parent-body processes
- 2019
-
In: Science. - : AAAS. - 0036-8075 .- 1095-9203. ; 364:6437
-
Journal article (peer-reviewed)abstract
- Asteroids fall to Earth in the form of meteorites, but these provide little information about their origins. The Japanese mission Hayabusa2 is designed to collect samples directly from the surface of an asteroid and return them to Earth for laboratory analysis. Three papers in this issue describe the Hayabusa2 team's study of the near-Earth carbonaceous asteroid 162173 Ryugu, at which the spacecraft arrived in June 2018 (see the Perspective by Wurm). Watanabeet al.measured the asteroid's mass, shape, and density, showing that it is a “rubble pile” of loose rocks, formed into a spinning-top shape during a prior period of rapid spin. They also identified suitable landing sites for sample collection. Kitazatoet al.used near-infrared spectroscopy to find ubiquitous hydrated minerals on the surface and compared Ryugu with known types of carbonaceous meteorite. Sugitaet al.describe Ryugu's geological features and surface colors and combined results from all three papers to constrain the asteroid's formation process. Ryugu probably formed by reaccumulation of rubble ejected by impact from a larger asteroid. These results provide necessary context to understand the samples collected by Hayabusa2, which are expected to arrive on Earth in December 2020.Science, this issue p.268, p.272, p.eaaw0422; see also p.230
|
|
| 2. |
|
|
| 3. |
- Sakatani, N., et al.
(author)
-
Anomalously porous boulders on (162173) Ryugu as primordial materials from its parent body
- 2021
-
In: Nature Astronomy. - : Springer Nature. - 2397-3366. ; 5:8, s. 766-774
-
Journal article (peer-reviewed)abstract
- Planetesimals—the initial stage of the planetary formation process—are considered to be initially very porous aggregates of dusts1,2, and subsequent thermal and compaction processes reduce their porosity3. The Hayabusa2 spacecraft found that boulders on the surface of asteroid (162173) Ryugu have an average porosity of 30–50% (refs. 4,5,6), higher than meteorites but lower than cometary nuclei7, which are considered to be remnants of the original planetesimals8. Here, using high-resolution thermal and optical imaging of Ryugu’s surface, we discovered, on the floor of fresh small craters (<20 m in diameter), boulders with reflectance (~0.015) lower than the Ryugu average6 and porosity >70%, which is as high as in cometary bodies. The artificial crater formed by Hayabusa2’s impact experiment9 is similar to these craters in size but does not have such high-porosity boulders. Thus, we argue that the observed high porosity is intrinsic and not created by subsequent impact comminution and/or cracking. We propose that these boulders are the least processed material on Ryugu and represent remnants of porous planetesimals that did not undergo a high degree of heating and compaction3. Our multi-instrumental analysis suggests that fragments of the highly porous boulders are mixed within the surface regolith globally, implying that they might be captured within collected samples by touch-down operations10,11.
|
|
| 4. |
- Meech, K. J., et al.
(author)
-
EPOXI: Comet 103P/Hartley 2 Observations from a Worldwide Campaign
- 2011
-
In: Astrophysical Journal Letters. - London : IOP. - 2041-8213 .- 2041-8205. ; 734:L1, s. 1-9
-
Journal article (peer-reviewed)abstract
- Earth- and space-based observations provide synergistic information for space mission encounters by providing data over longer timescales, at different wavelengths and using techniques that are impossible with an in situ flyby. We report here such observations in support of the EPOXI spacecraft flyby of comet 103P/Hartley 2. The nucleus is small and dark, and exhibited a very rapidly changing rotation period. Prior to the onset of activity, the period was ~16.4?hr. Starting in 2010 August the period changed from 16.6?hr to near 19?hr in December. With respect to dust composition, most volatiles and carbon and nitrogen isotope ratios, the comet is similar to other Jupiter-family comets. What is unusual is the dominance of CO 2 -driven activity near perihelion, which likely persists out to aphelion. Near perihelion the comet nucleus was surrounded by a large halo of water-ice grains that contributed significantly to the total water production.
|
|
| 5. |
- Kasai, Y., et al.
(author)
-
Validation of stratospheric and mesospheric ozone observed by SMILES from International Space Station
- 2013
-
In: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 6:9, s. 2311-2338
-
Journal article (peer-reviewed)abstract
- We observed ozone (O3) in the vertical region between 250 and 0.0005 hPa (~ 12–96 km) using the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) on the Japanese Experiment Module (JEM) of the International Space Station (ISS) between 12 October 2009 and 21 April 2010. The new 4 K superconducting heterodyne receiver technology of SMILES allowed us to obtain a one order of magnitude better signal-to-noise ratio for the O3 line observation compared to past spaceborne microwave instruments. The non-sun-synchronous orbit of the ISS allowed us to observe O3 at various local times. We assessed the quality of the vertical profiles of O3 in the 100–0.001 hPa (~ 16–90 km) region for the SMILES NICT Level 2 product version 2.1.5. The evaluation is based on four components: error analysis; internal comparisons of observations targeting three different instrumental setups for the same O3 625.371 GHz transition; internal comparisons of two different retrieval algorithms; and external comparisons for various local times with ozonesonde, satellite and balloon observations (ENVISAT/MIPAS, SCISAT/ACE-FTS, Odin/OSIRIS, Odin/SMR, Aura/MLS, TELIS). SMILES O3 data have an estimated absolute accuracy of better than 0.3 ppmv (3%) with a vertical resolution of 3–4 km over the 60 to 8 hPa range. The random error for a single measurement is better than the estimated systematic error, being less than 1, 2, and 7%, in the 40–1, 80–0.1, and 100–0.004 hPa pressure regions, respectively. SMILES O3 abundance was 10–20% lower than all other satellite measurements at 8–0.1 hPa due to an error arising from uncertainties of the tangent point information and the gain calibration for the intensity of the spectrum. SMILES O3 from observation frequency Band-B had better accuracy than that from Band-A. A two month period is required to accumulate measurements covering 24 h in local time of O3 profile. However such a dataset can also contain variation due to dynamical, seasonal, and latitudinal effects
|
|
| 6. |
- Ejiri, M.K., et al.
(author)
-
Validation of the Improved Limb Atmospheric Spectrometer-II (ILAS-II) Version 1.4 nitrous oxide and methane profiles
- 2006
-
In: Journal of Geophysical Research. - 0148-0227 .- 2156-2202. ; 111:D22
-
Journal article (peer-reviewed)abstract
- This study assesses polar stratospheric nitrous oxide (N(2)O) and methane (CH(4)) data from the Improved Limb Atmospheric Spectrometer-II (ILAS-II) on board the Advanced Earth Observing Satellite-II (ADEOS-II) retrieved by the Version 1.4 retrieval algorithm. The data were measured between January and October 2003. Vertical profiles of ILAS-II volume mixing ratio (VMR) data are compared with data from two balloon-borne instruments, the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS-B) and the MkIV instrument, as well as with two satellite sensors, the Odin Sub-Millimetre Radiometer (SMR) for N(2)O and the Halogen Occultation Experiment (HALOE) for CH(4). Relative percentage differences between the ILAS-II and balloon/satellite data and their median values are calculated in 10-ppbv-wide bins for N(2)O (from 0 to 400 ppbv) and in 0.05-ppmv-wide bins for CH(4) (from 0 to 2 ppmv) in order to assess systematic differences between the ILAS-II and balloon/satellite data. According to this study, the characteristics of the ILAS-II Version 1.4 N(2)O and CH(4) data differ between hemispheres. For ILAS-II N(2)O VMR larger than 250 ppbv, the ILAS-II N(2)O agrees with the balloon/SMR N(2)O within +/- 20% in both hemispheres. The ILAS-II N(2)O in the VMR range from 30-50 to 250 ppbv (corresponding to altitudes of similar to 17-30 km in the Northern Hemisphere (NH, mainly outside the polar vortex) and similar to 13-21 km in the Southern Hemisphere (SH, mainly inside the polar vortex) is smaller by similar to 10-30% than the balloon/SMR N(2)O. For ILAS-II N(2)O VMR smaller than 30 ppbv (>similar to 21 km) in the SH, the differences between the ILAS-II and SMR N(2)O are within +/- 10 ppbv. For ILAS-II CH(4) VMR larger than 1 ppmv (similar to 30 km) and the ILAS-II CH(4) for its VMR smaller than 1 ppmv (>similar to 25 km) only in the NH, are abnormally small compared to the balloon/satellite data.
|
|
| 7. |
|
|
| 8. |
- Roelfsema, P. R., et al.
(author)
-
SPICA-A Large Cryogenic Infrared Space Telescope : Unveiling the Obscured Universe
- 2018
-
In: Publications Astronomical Society of Australia. - : Cambridge University Press (CUP). - 1323-3580 .- 1448-6083. ; 35
-
Journal article (peer-reviewed)abstract
- Measurements in the infrared wavelength domain allow direct assessment of the physical state and energy balance of cool matter in space, enabling the detailed study of the processes that govern the formation and evolution of stars and planetary systems in galaxies over cosmic time. Previous infrared missions revealed a great deal about the obscured Universe, but were hampered by limited sensitivity. SPICA takes the next step in infrared observational capability by combining a large 2.5-meter diameter telescope. cooled to below 8 K, with instruments employing ultra-sensitive detectors. A combination of passive cooling and mechanical coolers will be used to cool both the telescope and the instruments. With mechanical coolers the mission lifetime is not limited by the supply of cryogen. With the combination of low telescope background and instruments with state-of-the-art detectors SPICA provides a huge advance on the capabilities of previous missions. SPICA instruments offer spectral resolving power ranging from R similar to 50 through 11 000 in the 17-230 mu m domain and R similar to 28.000 spectroscopy between 12 and 18 mu m.SPICA will provide efficient 30-37 mu m broad band mapping, and small field spectroscopic and polarimetric imaging at 100, 200 and 350 mu m. SPICA will provide infrared spectroscopy with an unprecedented sensitivity of similar to 5 x 10(-20) W m (-2) (5 sigma/1 h)-over two orders of magnitude improvement over what earlier missions. This exceptional performance leap, will open entirely new domains in infrared astronomy; galaxy evolution and metal production over cosmic time, dust formation and evolution from very early epochs onwards, the formation history of planetary systems.
|
|
| 9. |
- Serge, M. A., et al.
(author)
-
Testing the Effect of Relative Pollen Productivity on the REVEALS Model : A Validated Reconstruction of Europe-Wide Holocene Vegetation
- 2023
-
In: Land. - : MDPI. - 2073-445X. ; 12:5
-
Journal article (peer-reviewed)abstract
- Reliable quantitative vegetation reconstructions for Europe during the Holocene are crucial to improving our understanding of landscape dynamics, making it possible to assess the past effects of environmental variables and land-use change on ecosystems and biodiversity, and mitigating their effects in the future. We present here the most spatially extensive and temporally continuous pollen-based reconstructions of plant cover in Europe (at a spatial resolution of 1 degrees x 1 degrees) over the Holocene (last 11.7 ka BP) using the 'Regional Estimates of VEgetation Abundance from Large Sites' (REVEALS) model. This study has three main aims. First, to present the most accurate and reliable generation of REVEALS reconstructions across Europe so far. This has been achieved by including a larger number of pollen records compared to former analyses, in particular from the Mediterranean area. Second, to discuss methodological issues in the quantification of past land cover by using alternative datasets of relative pollen productivities (RPPs), one of the key input parameters of REVEALS, to test model sensitivity. Finally, to validate our reconstructions with the global forest change dataset. The results suggest that the RPPs.st1 (31 taxa) dataset is best suited to producing regional vegetation cover estimates for Europe. These reconstructions offer a long-term perspective providing unique possibilities to explore spatial-temporal changes in past land cover and biodiversity.
|
|
| 10. |
|
|
