1. |
- Gogova, Daniela, et al.
(author)
-
Epitaxial growth of β -Ga 2 O 3 by hot-wall MOCVD
- 2022
-
In: AIP Advances. - : AIP Publishing. - 2158-3226. ; 12:5, s. 055022-055022
-
Journal article (peer-reviewed)abstract
- The hot-wall metalorganic chemical vapor deposition (MOCVD) concept, previously shown to enable superior material quality and highperformance devices based on wide bandgap semiconductors, such as Ga(Al)N and SiC, has been applied to the epitaxial growth ofβ-Ga2O3. Epitaxial β-Ga2O3 layers at high growth rates (above 1 μm/h), at low reagent flows, and at reduced growth temperatures(740 ○C) are demonstrated. A high crystalline quality epitaxial material on a c-plane sapphire substrate is attained as corroborated by a combination of x-ray diffraction, high-resolution scanning transmission electron microscopy, and spectroscopic ellipsometry measurements. Thehot-wall MOCVD process is transferred to homoepitaxy, and single-crystalline homoepitaxial β-Ga2O3 layers are demonstrated with a 201 ¯rocking curve width of 118 arc sec, which is comparable to those of the edge-defined film-fed grown (201) ¯ β-Ga2O3 substrates, indicative ofsimilar dislocation densities for epilayers and substrates. Hence, hot-wall MOCVD is proposed as a prospective growth method to be furtherexplored for the fabrication of β-Ga2O3
|
|
2. |
- Gogova, Daniela, 1967-, et al.
(author)
-
Epitaxial growth of β-Ga2O3 by hot-wall MOCVD
- 2022
-
In: AIP Advances. - : AIP Publishing. - 2158-3226. ; 12:5
-
Journal article (peer-reviewed)abstract
- The hot-wall metalorganic chemical vapor deposition (MOCVD) concept, previously shown to enable superior material quality and high performance devices based on wide bandgap semiconductors, such as Ga(Al)N and SiC, has been applied to the epitaxial growth of beta-Ga2O3. Epitaxial beta-Ga2O3 layers at high growth rates (above 1 mu m/h), at low reagent flows, and at reduced growth temperatures (740 degrees C) are demonstrated. A high crystalline quality epitaxial material on a c-plane sapphire substrate is attained as corroborated by a combination of x-ray diffraction, high-resolution scanning transmission electron microscopy, and spectroscopic ellipsometry measurements. The hot-wall MOCVD process is transferred to homoepitaxy, and single-crystalline homoepitaxial beta-Ga2O3 layers are demonstrated with a 201 rocking curve width of 118 arc sec, which is comparable to those of the edge-defined film-fed grown (201) beta-Ga2O3 substrates, indicative of similar dislocation densities for epilayers and substrates. Hence, hot-wall MOCVD is proposed as a prospective growth method to be further explored for the fabrication of beta-Ga2O3.
|
|
3. |
- Sundarapandian, Balasubramanian, et al.
(author)
-
Comparison of aluminum nitride thin films prepared by magnetron sputter epitaxy in nitrogen and ammonia atmosphere
- 2024
-
In: Applied Physics Letters. - 0003-6951. ; 124:18
-
Journal article (peer-reviewed)abstract
- Wurtzite-type aluminum nitride (AlN) thin films exhibiting high thermal conductivity, large grain size, and low surface roughness are desired for both bulk acoustic wave and surface acoustic wave resonators. In this work, we use ammonia (NH3) assisted reactive sputter deposition of AlN to significantly improve these properties. The study shows a systematic change in the structural, thermal, and morphological properties of AlN grown in nitrogen (N2) and N2 + NH3 atmosphere. The study demonstrates that NH3 assisted AlN sputtering facilitates 2D growth. In addition, the study presents a growth model relating the 2D growth to improve the mobility of aluminum (Al) and nitrogen (N) ad-atoms in NH3 atmosphere. Consequently, the thermal conductivity and roughness improve by ≈ 76%, and ≈ 35%, while the grain size increases by ≈ 78%.
|
|