1. |
|
|
2. |
- Hudson, Lawrence N, et al.
(author)
-
The database of the PREDICTS (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems) project
- 2017
-
In: Ecology and Evolution. - : John Wiley & Sons. - 2045-7758. ; 7:1, s. 145-188
-
Journal article (peer-reviewed)abstract
- The PREDICTS project-Projecting Responses of Ecological Diversity In Changing Terrestrial Systems (www.predicts.org.uk)-has collated from published studies a large, reasonably representative database of comparable samples of biodiversity from multiple sites that differ in the nature or intensity of human impacts relating to land use. We have used this evidence base to develop global and regional statistical models of how local biodiversity responds to these measures. We describe and make freely available this 2016 release of the database, containing more than 3.2 million records sampled at over 26,000 locations and representing over 47,000 species. We outline how the database can help in answering a range of questions in ecology and conservation biology. To our knowledge, this is the largest and most geographically and taxonomically representative database of spatial comparisons of biodiversity that has been collated to date; it will be useful to researchers and international efforts wishing to model and understand the global status of biodiversity.
|
|
3. |
- Espinosa-Oliva, Ana M., et al.
(author)
-
Inflammatory bowel disease induces pathological α-synuclein aggregation in the human gut and brain
- 2024
-
In: Neuropathology and Applied Neurobiology. - 0305-1846. ; 50:1
-
Journal article (peer-reviewed)abstract
- Aims: According to Braak's hypothesis, it is plausible that Parkinson's disease (PD) originates in the enteric nervous system (ENS) and spreads to the brain through the vagus nerve. In this work, we studied whether inflammatory bowel diseases (IBDs) in humans can progress with the emergence of pathogenic α-synuclein (α-syn) in the gastrointestinal tract and midbrain dopaminergic neurons. Methods: We have analysed the gut and the ventral midbrain from subjects previously diagnosed with IBD and form a DSS-based rat model of gut inflammation in terms of α-syn pathology. Results: Our data support the existence of pathogenic α-syn in both the gut and the brain, thus reinforcing the potential role of the ENS as a contributing factor in PD aetiology. Additionally, we have analysed the effect of a DSS-based rat model of gut inflammation to demonstrate (i) the appearance of P-α-syn inclusions in both Auerbach's and Meissner's plexuses (gut), (ii) an increase in α-syn expression in the ventral mesencephalon (brain) and (iii) the degeneration of nigral dopaminergic neurons, which all are considered classical hallmarks in PD. Conclusion: These results strongly support the plausibility of Braak's hypothesis and emphasise the significance of peripheral inflammation and the gut-brain axis in initiating α-syn aggregation and transport to the substantia nigra, resulting in neurodegeneration.
|
|
4. |
- Ademuyiwa, Adesoji O., et al.
(author)
-
Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries
- 2016
-
In: BMJ Global Health. - : BMJ Publishing Group Ltd. - 2059-7908. ; 1:4
-
Journal article (peer-reviewed)abstract
- Background: Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally.Methods: Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression.Results: This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed.Conclusions: Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas.
|
|
5. |
- Algaba, Juan-Carlos, et al.
(author)
-
Broadband Multi-wavelength Properties of M87 during the 2017 Event Horizon Telescope Campaign
- 2021
-
In: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 911:1
-
Research review (peer-reviewed)abstract
- In 2017, the Event Horizon Telescope (EHT) Collaboration succeeded in capturing the first direct image of the center of the M87 galaxy. The asymmetric ring morphology and size are consistent with theoretical expectations for a weakly accreting supermassive black hole of mass ∼6.5 × 109 M o˙. The EHTC also partnered with several international facilities in space and on the ground, to arrange an extensive, quasi-simultaneous multi-wavelength campaign. This Letter presents the results and analysis of this campaign, as well as the multi-wavelength data as a legacy data repository. We captured M87 in a historically low state, and the core flux dominates over HST-1 at high energies, making it possible to combine core flux constraints with the more spatially precise very long baseline interferometry data. We present the most complete simultaneous multi-wavelength spectrum of the active nucleus to date, and discuss the complexity and caveats of combining data from different spatial scales into one broadband spectrum. We apply two heuristic, isotropic leptonic single-zone models to provide insight into the basic source properties, but conclude that a structured jet is necessary to explain M87's spectrum. We can exclude that the simultaneous γ-ray emission is produced via inverse Compton emission in the same region producing the EHT mm-band emission, and further conclude that the γ-rays can only be produced in the inner jets (inward of HST-1) if there are strongly particle-dominated regions. Direct synchrotron emission from accelerated protons and secondaries cannot yet be excluded.
|
|
6. |
- Backes, Claudia, et al.
(author)
-
Production and processing of graphene and related materials
- 2020
-
In: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Journal article (peer-reviewed)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
7. |
- Caronna, Edoardo, et al.
(author)
-
Redefining migraine prevention: early treatment with anti-CGRP monoclonal antibodies enhances response in the real world
- 2024
-
In: JOURNAL OF NEUROLOGY NEUROSURGERY AND PSYCHIATRY. - 0022-3050 .- 1468-330X.
-
Journal article (peer-reviewed)abstract
- Background Anti-CGRP monoclonal antibodies (anti-CGRP MAbs) are approved and available treatments for migraine prevention. Patients do not respond alike and many countries have reimbursement policies, which hinder treatments to those who might respond. This study aimed to investigate clinical factors associated with good and excellent response to anti-CGRP MAbs at 6 months. Methods European multicentre, prospective, real-world study, including high-frequency episodic or chronic migraine (CM) patients treated since March 2018 with anti-CGRP MAbs. We defined good and excellent responses as >= 50% and >= 75% reduction in monthly headache days (MHD) at 6 months, respectively. Generalised mixed-effect regression models (GLMMs) were used to identify variables independently associated with treatment response. Results Of the 5818 included patients, 82.3% were females and the median age was 48.0 (40.0-55.0) years. At baseline, the median of MHD was 20.0 (14.0-28.0) days/months and 72.2% had a diagnosis of CM. At 6 months (n=4963), 56.5% (2804/4963) were good responders and 26.7% (1324/4963) were excellent responders. In the GLMM model, older age (1.08 (95% CI 1.02 to 1.15), p=0.016), the presence of unilateral pain (1.39 (95% CI 1.21 to 1.60), p<0.001), the absence of depression (0.840 (95% CI 0.731 to 0.966), p=0.014), less monthly migraine days (0.923 (95% CI 0.862 to 0.989), p=0.023) and lower Migraine Disability Assessment at baseline (0.874 (95% CI 0.819 to 0.932), p<0.001) were predictors of good response (AUC of 0.648 (95% CI 0.616 to 0.680)). These variables were also significant predictors of excellent response (AUC of 0.691 (95% CI 0.651 to 0.731)). Sex was not significant in the GLMM models. Conclusions This is the largest real-world study of migraine patients treated with anti-CGRP MAbs. It provides evidence that higher migraine frequency and greater disability at baseline reduce the likelihood of responding to anti-CGRP MAbs, informing physicians and policy-makers on the need for an earlier treatment in order to offer the best chance of treatment success.
|
|
8. |
- Penteriani, Vincenzo, et al.
(author)
-
Female brown bears use areas with infanticide risk in a spatially confined population
- 2020
-
In: Ursus (International Association for Bear Research and Management). - 1537-6176 .- 1938-5439. ; 2020:31e2, s. 1-9
-
Journal article (peer-reviewed)abstract
- Areas used by female brown bears (Ursus arctos) with cubs-of-the-year (hereafter, FCOY) during the first months after den exit are crucial for offspring survival, primarily because of the risk of infanticide by male bears. Therefore, FCOY may avoid areas frequented by adult males during the mating season. The main aim of this study was to identify landscape features (i.e., structure, composition, and human footprint) that may differentiate the habitat use of FCOY in the small bear population of the Cantabrian Mountains (northwestern Spain; 2001–2016) from (a) areas frequented by females with yearlings, because older cubs are at less risk of infanticide than cubs-of-the-year, and (b) bear mating areas (i.e., the riskiest areas for FCOY because of the presence of adult males). During the first months after den emergence (Apr–Jun), FCOY settled in the roughest areas of the Cantabrian Mountains at most spatial scales. This settlement pattern might represent a behavioral adaptation of FCOY to reduce the risk of encounters with males during the mating season. However, FCOY also settled in similar landscapes to those used by adult bears during the mating season, which may increase the likelihood of risky encounters. Indeed, we observed a spatial overlap between observed locations of FCOY and mating areas, which may help explain the high frequency of infanticide observed in the Cantabrian Mountains. We hypothesize that the need for both shelter and food in early spring may ‘trap’ FCOY in otherwise favorable areas that overlap with mating areas. This may occur predominately in small and confined bear populations, such as the one in the Cantabrian Mountains, where a restricted range and limited habitat availability might prevent FCOY from avoiding risky areas successfully.
|
|
9. |
-
The Seventeenth Data Release of the Sloan Digital Sky Surveys : Complete Release of MaNGA, MaStar, and APOGEE-2 Data
- 2022
-
In: Astrophysical Journal Supplement Series. - : Institute of Physics (IOP). - 0067-0049 .- 1538-4365. ; 259:2
-
Journal article (peer-reviewed)abstract
- This paper documents the seventeenth data release (DR17) from the Sloan Digital Sky Surveys; the fifth and final release from the fourth phase (SDSS-IV). DR17 contains the complete release of the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey, which reached its goal of surveying over 10,000 nearby galaxies. The complete release of the MaNGA Stellar Library accompanies this data, providing observations of almost 30,000 stars through the MaNGA instrument during bright time. DR17 also contains the complete release of the Apache Point Observatory Galactic Evolution Experiment 2 survey that publicly releases infrared spectra of over 650,000 stars. The main sample from the Extended Baryon Oscillation Spectroscopic Survey (eBOSS), as well as the subsurvey Time Domain Spectroscopic Survey data were fully released in DR16. New single-fiber optical spectroscopy released in DR17 is from the SPectroscipic IDentification of ERosita Survey subsurvey and the eBOSS-RM program. Along with the primary data sets, DR17 includes 25 new or updated value-added catalogs. This paper concludes the release of SDSS-IV survey data. SDSS continues into its fifth phase with observations already underway for the Milky Way Mapper, Local Volume Mapper, and Black Hole Mapper surveys.
|
|
10. |
- Zarzo-Arias, Alejandra, et al.
(author)
-
Identifying potential areas of expansion for the endangered brown bear (Ursus arctos) population in the Cantabrian Mountains (NW Spain)
- 2019
-
In: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 14:1
-
Journal article (peer-reviewed)abstract
- Many large carnivore populations are expanding into human-modified landscapes and the subsequent increase in coexistence between humans and large carnivores may intensify various types of conflicts. A proactive management approach is critical to successful mitigation of such conflicts. The Cantabrian Mountains in Northern Spain are home to the last remaining native brown bear (Ursus arctos) population of the Iberian Peninsula, which is also amongst the most severely threatened European populations, with an important core group residing in the province of Asturias. There are indications that this small population is demographically expanding its range. The identification of the potential areas of brown bear range expansion is crucial to facilitate proactive conservation and management strategies towards promoting a further recovery of this small and isolated population. Here, we used a presence-only based maximum entropy (MaxEnt) approach to model habitat suitability and identify the areas in the Asturian portion of the Cantabrian Mountains that are likely to be occupied in the future by this endangered brown bear population following its range expansion. We used different spatial scales to identify brown bear range suitability according to different environmental, topographic, climatic and human impact variables. Our models mainly show that: (1) 4977 km(2) are still available as suitable areas for bear range expansion, which represents nearly half of the territory of Asturias; (2) most of the suitable areas in the western part of the province are already occupied (77% of identified areas, 2820 km(2)), 41.4% of them occurring inside protected areas, which leaves relatively limited good areas for further expansion in this part of the province, although there might be more suitable areas in surrounding provinces; and (3) in the eastern sector of the Asturian Cantabrian Mountains, 62% (2155 km(2)) of the land was classified as suitable, and this part of the province hosts 44.3% of the total area identified as suitable areas for range expansion. Our results further highlight the importance of increasing: (a) the connectivity between the currently occupied western part of Asturias and the areas of potential range expansion in the eastern parts of the province; and (b) the protection of the eastern sector of the Cantabrian Mountains, where most of the future population expansion may be expected.
|
|