1. |
- Ahmad, Y., et al.
(author)
-
NMR and NEXAFS Study of Various Graphite Fluorides
- 2013
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 117:26, s. 13564-13572
-
Journal article (peer-reviewed)abstract
- Graphite fluorides with different structural types (CyF)(n) (y = 2.5, 2, and 1) and room temperature graphite fluorides were studied by solid state,NMR and NEXAFS. Data extracted from those two techniques are complementary, providing information about the C-F bonding and the hybridization character of the carbon atom valence states. The comparison of data obtained by different methods such as NMR, Raman, and X-ray absorption leads to similar conclusions regarding the chemical bonding in fluorographites. Several major configurations of fluorinated graphites are discussed, that is, planar sheets with mainly sp(2) hybridization in room temperature graphite fluorides and corrugated sheets with sp(3) hybridization in covalent high temperature graphite fluoride. Different references such as highly oriented pyrolytic graphite (HOPG), graphitized carbon nanodiscs (graph-CNDs) and nanodiamonds (NDs) have also been investigated for comparison.
|
|
2. |
- Abelev, Betty, et al.
(author)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
In: Journal of High Energy Physics. - 1029-8479. ; :11
-
Journal article (peer-reviewed)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
3. |
- Abelev, Betty, et al.
(author)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
In: Journal of High Energy Physics. - 1029-8479. ; :7
-
Journal article (peer-reviewed)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
4. |
|
|
5. |
- Simonov, Konstantin A., et al.
(author)
-
Effect of Electron Injection in Copper-Contacted Graphene Nanoribbons
- 2016
-
In: Nano Reseach. - : Springer Science and Business Media LLC. - 1998-0124 .- 1998-0000. ; 9:9, s. 2735-2746
-
Journal article (peer-reviewed)abstract
- For practical electronic device applications of graphene nanoribbons (GNRs), it is essential to have abrupt and well-defined contacts between the ribbon and the adjacent metal lead. By analogy with graphene, these contacts can induce electron or hole doping, which may significantly affect the I/V characteristics of the device. Cu is among the most popular metals of choice for contact materials. In this study, we investigate the effect of in situ intercalation of Cu on the electronic structure of atomically precise, spatially aligned armchair GNRs of width N = 7 (7-AGNRs) fabricated via a bottom-up method on the Au(788) surface. Scanning tunneling microscopy data reveal that the complete intercalation of about one monolayer of Cu under 7-AGNRs can be facilitated by gentle annealing of the sample at 80 A degrees C. Angle-resolved photoemission spectroscopy (ARPES) data clearly reflect the one-dimensional character of the 7-AGNR band dispersion before and after intercalation. Moreover, ARPES and core-level photoemission results show that intercalation of Cu leads to significant electron injection into the nanoribbons, which causes a pronounced downshift of the valence and conduction bands of the GNR with respect to the Fermi energy (Delta E similar to 0.5 eV). As demonstrated by ARPES and X-ray absorption spectroscopy measurements, the effect of Cu intercalation is restricted to n-doping only, without considerable modification of the band structure of the GNRs. Post-annealing of the 7-AGNRs/Cu/Au(788) system at 200 A degrees C activates the diffusion of Cu into Au and the formation of a Cu-rich surface Au layer. Alloying of intercalated Cu leads to the recovery of the initial position of GNR-related bands with respect to the Fermi energy (E (F)), thus, proving the tunability of the induced n-doping.
|
|
6. |
- Simonov, Konstantin A., et al.
(author)
-
From Graphene Nanoribbons on Cu(111) to Nanographene on Cu(110) : Critical Role of Substrate Structure in the Bottom-Up Fabrication Strategy
- 2015
-
In: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 9:9, s. 8997-9011
-
Journal article (peer-reviewed)abstract
- Bottom-up strategies can be effectively implemented for the fabrication of atomically precise graphene nanoribbons. Recently, using 10,10'-dibromo-9,9'-bianthracene (DBBA) as a molecular precursor to grow armchair nanoribbons on Au(111) and Cu(111), we have shown that substrate activity considerably affects the dynamics of ribbon formation, nonetheless without significant modifications in the growth mechanism. In this paper we compare the on-surface reaction pathways for DBBA molecules on Cu(111) and Cu(110). Evolution of both systems has been studied via a combination of core-level X-ray spectroscopies, scanning tunneling microscopy, and theoretical calculations. Experimental and theoretical results reveal a significant increase in reactivity for the open and anisotropic Cu(110) surface in comparison with the close-packed Cu(111). This increased reactivity results in a predominance of the molecular substrate interaction over the intermolecular one, which has a critical impact on the transformations of DBBA on Cu(110). Unlike DBBA on Cu(111), the Ullmann coupling cannot be realized for DBBA/Cu(110) and the growth of nanoribbons via this mechanism is blocked. Instead, annealing of DBBA on Cu(110) at 250 degrees C results in the formation of a new structure: quasi-zero-dimensional flat nanographenes. Each nanographene unit has dehydrogenated zigzag edges bonded to the underlying Cu rows and oriented with the hydrogen-terminated armchair edge parallel to the [1-10] direction. Strong bonding of nanographene to the substrate manifests itself in a high adsorption energy of -12.7 eV and significant charge transfer of 3.46e from the copper surface. Nanographene units coordinated with bromine adatoms are able to arrange in highly regular arrays potentially suitable for nanotemplating.
|
|
7. |
- Murphy, B. E., et al.
(author)
-
Growth and ordering of Ni(II) diphenylporphyrin monolayers on Ag(111) and Ag/Si(111) studied by STM and LEED
- 2012
-
In: Journal of Physics: Condensed Matter. - : IOP Publishing. - 1361-648X .- 0953-8984. ; 24:4
-
Journal article (peer-reviewed)abstract
- The room temperature self-assembly and ordering of (5,15-diphenylporphyrinato) nickel(II) (NiDPP) on the Ag(111) and Ag/Si(111)-(root 3 x root 3)R30 degrees surfaces have been investigated using scanning tunnelling microscopy and low-energy electron diffraction. The self-assembled structures and lattice parameters of the NiDPP monolayer are shown to be extremely dependent on the reactivity of the substrate, and probable molecular binding sites are proposed. The NiDPP overlayer on Ag(111) grows from the substrate step edges, which results in a single-domain structure. This close-packed structure has an oblique unit cell and consists of molecular rows. The molecules in adjacent rows are rotated by approximately 17 degrees with respect to each other. In turn, the NiDPP molecules form three equivalent domains on the Ag/Si(111)-(root 3 x root 3)R30 degrees surface, which follow the three-fold symmetry of the substrate. The molecules adopt one of three equivalent orientations on the surface, acting as nucleation sites for these domains, due to the stronger molecule-substrate interaction compared to the case of the Ag(111). The results are explained in terms of the substrate reactivity and the lattice mismatch between the substrate and the molecular overlayer.
|
|
8. |
- Simonov, K. A., et al.
(author)
-
Controllable oxidation of h-BN monolayer on Ir(111) studied by core-level spectroscopies
- 2012
-
In: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 606:3-4, s. 564-570
-
Journal article (peer-reviewed)abstract
- The effect of atomic oxygen adsorption on the structure and electronic properties of monolayer hexagonal boron nitride (h-BN) grown on Ir(111) has been studied using near edge X-ray absorption fine structure spectroscopy (NEXAFS), photoelectron spectroscopy (PES), and low-energy electron diffraction (LEED). It has been shown that the oxidation of the h-BN monolayer occurs through a gradual substitution of N by O in the h-BN lattice. This process leads to the formation of defect sites corresponding to three different types of the B atom environment (BN3-xOx with x=1,2,3). The oxidation of the h-BN monolayer is very different from the case of graphene on Ir(111), where adsorption of atomic oxygen results mainly in the formation of epoxy groups [J. Phys. Chem. C. 115, 9568 (2011)]. A post-annealing of the h-BN monolayer after oxygen exposure results in further destruction of the B N bonds and formation of a B2O3-like structure. (C) 2011 Elsevier B.V. All rights reserved.
|
|
9. |
- Simonov, Konstantin, 1988-, et al.
(author)
-
Effect of Substrate Chemistry on the Bottom-Up Fabrication of Graphene Nanoribbons : Combined Core-Level Spectroscopy and STM Study
- 2014
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 118:23, s. 12532-12540
-
Journal article (peer-reviewed)abstract
- Atomically precise graphene nanoribbons (GNRs) can be fabricated via thermally induced polymerization of halogen containing molecular precursors on metal surfaces. In this paper the effect of substrate reactivity on the growth and structure of armchair GNRs (AGNRs) grown on inert Au(111) and active Cu(111) surfaces has been systematically studied by a combination of core-level X-ray spectroscopies and scanning tunneling microscopy. It is demonstrated that the activation threshold for the dehalogenation process decreases with increasing catalytic activity of the substrate. At room temperature the 10,10'-dibromo-9,9'-bianthracene (DBBA) precursor molecules on Au(111) remain intact, while on Cu(111) a complete surface-assisted dehalogenation takes place. Dehalogenation of precursor molecules on Au(111) only starts at around 80 degrees C and completes at 200 degrees C, leading to the formation of linear polymer chains. On Cu(111) tilted polymer chains appear readily at room temperature or slightly elevated temperatures. Annealing of the DBBA/Cu(111) above 100 degrees C leads to intramolecular cyclodehydrogenation and formation of flat AGNRs at 200 degrees C, while on the Au(111) surface the formation of GNRs takes place only at around 400 degrees C. In STM, nanoribbons have significantly reduced apparent height on Cu(111) as compared to Au(111), 70 +/- 11 pm versus 172 +/- 14 pm, independently of the bias voltage. Moreover, an alignment of GNRs along low-index crystallographic directions of the substrate is evident for Cu(111), while on Au(111) it is more random. Elevating the Cu(111) substrate temperature above 400 degrees C results in a dehydrogenation and subsequent decomposition of GNRs; at 750 degrees C the dehydrogenated carbon species self-organize in graphene islands. In general, our data provide evidence for a significant influence of substrate reactivity on the growth dynamics of GNRs.
|
|
10. |
- Vinogradov, Nikolay, et al.
(author)
-
Controllable p-doping of graphene on Ir(111) by chlorination with FeCl(3).
- 2012
-
In: Journal of Physics: Condensed Matter. - : IOP Publishing. - 1361-648X .- 0953-8984. ; 24:31
-
Journal article (peer-reviewed)abstract
- The in situ chlorination of graphene on Ir(111) has been achieved by depositing FeCl(3) followed by its thermal decomposition on the surface into FeCl(2) and Cl. This process is accompanied by an intercalation of Cl under graphene and formation of an epitaxial FeCl(2) film on top, which can be removed upon further annealing. A pronounced hole doping of graphene has been observed as a consequence of the annealing-assisted intercalation of Cl. This effect has been studied by a combination of core-level and angle-resolved photoelectron spectroscopies (CL PES and ARPES, respectively), near-edge x-ray absorption fine structure (NEXAFS) spectroscopy and low-energy electron diffraction (LEED). The ease of preparation, the remarkable reproducibility of the doping level and the reversibility of the doping upon annealing are the key factors making chlorination with FeCl(3) a promising route for tuning the electronic properties in graphene.
|
|