1. |
|
|
2. |
- Kristanl, Matej, et al.
(author)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
In: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
3. |
|
|
4. |
- Li, Youbing, et al.
(author)
-
Nanolaminated Ternary Transition Metal Carbide (MAX Phase)-Derived Core-Shell Structure Electrocatalysts for Hydrogen Evolution and Oxygen Evolution Reactions in Alkaline Electrolytes
- 2023
-
In: The Journal of Physical Chemistry Letters. - : AMER CHEMICAL SOC. - 1948-7185. ; 14:2, s. 481-488
-
Journal article (peer-reviewed)abstract
- The development of abundant, cheap, and highly active catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for hydrogen production. Nanolaminate ternary transition metal carbides (MAX phases) and their derived two-dimensional transition metal carbides (MXenes) have attracted considerable interest for electrocatalyst applications. Herein, four new MAX@MXene core-shell structures (Ta2CoC@ Ta2CTx, Ta2NiC@Ta2CTx, Nb2CoC@Nb2CTx, and Nb2NiC@Nb2CTx), in which the core region is Co/Ni-MAX phases while the edge region is MXenes, have been prepared. Under alkaline electrolyte conditions, the Ta2CoC@Ta2CTx core-shell structure showed an overpotential of 239 mV and excellent stability during the HER with MXenes as the active sites. For the OER, the Ta2CoC@Ta2CTx core- shell structure showed an overpotential of 373 mV and a small Tafel plot (56 mV dec-1), which maintained a bulk crystalline structure and generated Co-based oxyhydroxides that formed by surface reconstruction as active sites. Considering rich chemical compositions and structures of MAX phases, this work provides a new strategy for designing multifunctional electrocatalysts and also paves the way for further development of MAX phase-based materials for clean energy applications.
|
|
5. |
- Li, Youbing, et al.
(author)
-
Near-room temperature ferromagnetic behavior of single-atom-thick 2D iron in nanolaminated ternary MAX phases
- 2021
-
In: Applied Physics Reviews. - : AIP Publishing. - 1931-9401. ; 8:3
-
Journal article (peer-reviewed)abstract
- M(n+)(1)AX(n) (MAX) phases nanolaminated ternary carbides or nitrides possess a unique crystal structure in which single-atom-thick "A" sublayers are interleaved by alternative stacking of a "Mn+1Xn" sublayer; these materials have been investigated as promising high-safety structural materials for industrial applications because of their laminated structure and metal and ceramic properties. However, limited of A-site elements in the definition of M(n+)(1)AX(n) phases, it is a huge challenge for designing nanolaminated ferromagnetic materials with single-atom-thick two-dimensional iron layers occupying the A layers in the M(n+)(1)AX(n) phases. Here, we report three new ternary magnetic M(n+)(1)AX(n) phases (Ta2FeC, Ti2FeN, and Nb2FeC) with A sublayers of single-atom-thick two-dimensional iron through an isomorphous replacement reaction of M(n+)(1)AX(n) precursors (Ta2AlC, Ti2AlN, and Nb2AlC) with a Lewis acid salts (FeCl2). All these M(n+)(1)AX(n) phases exhibit ferromagnetic behavior. The Curie temperatures of the Ta2FeC and Nb2FeC M(n+)(1)AX(n) phases are 281 and 291K, respectively, i.e., close to room temperature. The saturation magnetization of these ternary magnetic MAX phases is almost two orders of magnitude higher than V-2(Sn,Fe)C, whose A-site is partially substituted by Fe. Theoretical calculations on magnetic orderings of spin moments of Fe atoms in these nanolaminated magnetic M(n+)(1)AX(n) phases reveal that the magnetism can be mainly ascribed to an intralayer exchange interaction of the two-dimensional Fe atomic layers. Owing to the richness in composition of M(n+)(1)AX(n) phases, our work provides a large imaginary space for constructing functional single-atom-thick two-dimensional layers in materials using these nanolaminated templates.
|
|
6. |
- Lv, Yuexia, et al.
(author)
-
Determination of optimum tilt angle and orientation for solar collectors based on effective solar heat collection
- 2018
-
In: Applied Energy. - : ELSEVIER SCI LTD. - 0306-2619 .- 1872-9118. ; 219, s. 11-19
-
Journal article (peer-reviewed)abstract
- Determination of optimum tilt angle and orientation of solar collectors by maximizing the total solar radiation may overestimate the energy production benefits, because a considerable amount of solar radiation is ineffective for practical solar collectors. In this paper, the concept of effective solar heat collection is proposed to rule out the ineffective solar radiation that could not be converted to available energy. Accordingly, an optimized mathematical model is developed and used to determine the optimum tilt angle and orientation of solar collectors installed in Lhasa during the heating season. Compared with the total solar radiation based optimum results, there is a deviation of 5 degrees in the optimum orientations based on the effective solar heat collection. The case study shows that it is not advisable to adjust the optimum tilt angle on a monthly basis because there is no significance change in total solar energy gains in comparison with the case of no such adjustment during the heating season. In addition, the correction factors to achieving the maximum effective solar heat collection are given at different tilt angles and orientations to guide installation of solar collectors in practical engineering applications.
|
|
7. |
- Si, Pengfei, et al.
(author)
-
An optimization method applied to active solar energy systems for buildings in cold plateau areas - The case of Lhasa
- 2017
-
In: Applied Energy. - : ELSEVIER SCI LTD. - 0306-2619 .- 1872-9118. ; 194, s. 487-498
-
Journal article (peer-reviewed)abstract
- Solar energy for building applications may significantly reduce the conventional energy consumption and the related carbon dioxide emissions. The comprehensive utilization of integrated solar thermal and photovoltaic systems is undoubtedly a subject of interest. In the present paper, an optimization model was proposed for integrated solar energy systems, aiming to figure out the optimal utilization and economical efficiency of solar energy resources for buildings in cold plateau areas. A case study in Lhasa city was further carried out in order to evaluate the energy and economic performance of the developed model. The results indicated that solar photovoltaic systems are preferred than solar thermal systems for typical office buildings in cold plateau areas with rich solar energy resources. In addition, a sensitivity analysis was performed to investigate the influences of financial subsidies and commercial electricity prices on the system economical performance. Furthermore, life cycle assessment was conducted to compare and analyze the performances of an optimization system and a conventional system.
|
|
8. |
- Wang, Ning, et al.
(author)
-
Boride-derived oxygen-evolution catalysts
- 2021
-
In: Nature Communications. - : Springer Nature. - 2041-1723. ; 12
-
Journal article (peer-reviewed)abstract
- Metal borides/borates have been considered promising as oxygen evolution reaction catalysts; however, to date, there is a dearth of evidence of long-term stability at practical current densities. Here we report a phase composition modulation approach to fabricate effective borides/borates-based catalysts. We find that metal borides in-situ formed metal borates are responsible for their high activity. This knowledge prompts us to synthesize NiFe-Boride, and to use it as a templating precursor to form an active NiFe-Borate catalyst. This boride-derived oxide catalyzes oxygen evolution with an overpotential of 167 mV at 10 mA/cm2 in 1 M KOH electrolyte and requires a record-low overpotential of 460 mV to maintain water splitting performance for over 400 h at current density of 1 A/cm2. We couple the catalyst with CO reduction in an alkaline membrane electrode assembly electrolyser, reporting stable C2H4 electrosynthesis at current density 200 mA/cm2 for over 80 h.
|
|
9. |
- Yu, Xiaolin, et al.
(author)
-
Heparan sulfate-dependent phase separation of CCL5 and its chemotactic activity
- 2024
-
In: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 13
-
Journal article (peer-reviewed)abstract
- Secreted chemokines form concentration gradients in target tissues to control migratory directions and patterns of immune cells in response to inflammatory stimulation; however, how the gradients are formed is much debated. Heparan sulfate (HS) binds to chemokines and modulates their activities. In this study, we investigated the roles of HS in the gradient formation and chemoattractant activity of CCL5 that is known to bind to HS. CCL5 and heparin underwent liquid-liquid phase separation and formed gradient, which was confirmed using CCL5 immobilized on heparin-beads. The biological implication of HS in CCL5 gradient formation was established in CHO-K1 (wild-type) and CHO-677 (lacking HS) cells by Transwell assay. The effect of HS on CCL5 chemoattractant activity was further proved by Transwell assay of human peripheral blood cells. Finally, peritoneal injection of the chemokines into mice showed reduced recruitment of inflammatory cells either by mutant CCL5 (lacking heparin-binding sequence) or by addition of heparin to wild-type CCL5. Our experimental data propose that co-phase separation of CCL5 with HS establishes a specific chemokine concentration gradient to trigger directional cell migration. The results warrant further investigation on other heparin-binding chemokines and allows for a more elaborate insight into disease process and new treatment strategies.
|
|
10. |
- Zhao, Sen, et al.
(author)
-
Expanding the mutation and phenotype spectrum of MYH3-associated skeletal disorders
- 2022
-
In: NPJ genomic medicine. - : Nature Publishing Group. - 2056-7944. ; 7:1
-
Journal article (peer-reviewed)abstract
- Pathogenic variants in MYH3 cause distal arthrogryposis type 2A and type 2B3 as well as contractures, pterygia and spondylocarpotarsal fusion syndromes types 1A and 1B. These disorders are ultra-rare and their natural course and phenotypic variability are not well described. In this study, we summarize the clinical features and genetic findings of 17 patients from 10 unrelated families with vertebral malformations caused by dominant or recessive pathogenic variants in MYH3. Twelve novel pathogenic variants in MYH3 (NM_002470.4) were identified: three of them were de novo or inherited in autosomal dominant way and nine were inherited in autosomal recessive way. The patients had vertebral segmentation anomalies accompanied with variable joint contractures, short stature and dysmorphic facial features. There was a significant phenotypic overlap between dominant and recessive MYH3-associated conditions regarding the degree of short stature as well as the number of vertebral fusions. All monoallelic variants caused significantly decreased SMAD3 phosphorylation, which is consistent with the previously proposed pathogenic mechanism of impaired canonical TGF-β signaling. Most of the biallelic variants were predicted to be protein-truncating, while one missense variant c.4244T>G,p.(Leu1415Arg), which was inherited in an autosomal recessive way, was found to alter the phosphorylation level of p38, suggesting an inhibition of the non-canonical pathway of TGF-β signaling. In conclusion, the identification of 12 novel pathogenic variants and overlapping phenotypes in 17 affected individuals from 10 unrelated families expands the mutation and phenotype spectrum of MYH3-associated skeletal disorders. We show that disturbances of canonical or non-canonical TGF-β signaling pathways are involved in pathogenesis of MYH3-associated skeletal fusion (MASF) syndrome.
|
|