| 1. |
- Felsberg, Michael, et al.
(author)
-
The Thermal Infrared Visual Object Tracking VOT-TIR2015 Challenge Results
- 2015
-
In: Proceedings of the IEEE International Conference on Computer Vision. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781467383905 ; , s. 639-651
-
Conference paper (peer-reviewed)abstract
- The Thermal Infrared Visual Object Tracking challenge 2015, VOTTIR2015, aims at comparing short-term single-object visual trackers that work on thermal infrared (TIR) sequences and do not apply prelearned models of object appearance. VOT-TIR2015 is the first benchmark on short-term tracking in TIR sequences. Results of 24 trackers are presented. For each participating tracker, a short description is provided in the appendix. The VOT-TIR2015 challenge is based on the VOT2013 challenge, but introduces the following novelties: (i) the newly collected LTIR (Linköping TIR) dataset is used, (ii) the VOT2013 attributes are adapted to TIR data, (iii) the evaluation is performed using insights gained during VOT2013 and VOT2014 and is similar to VOT2015.
|
|
| 2. |
- Kristan, Matej, et al.
(author)
-
The Visual Object Tracking VOT2015 challenge results
- 2015
-
In: Proceedings 2015 IEEE International Conference on Computer Vision Workshops ICCVW 2015. - : IEEE. - 9780769557205 ; , s. 564-586
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website(1).
|
|
| 3. |
- Gao, Xindi, et al.
(author)
-
Cryptococcal Hsf3 controls intramitochondrial ROS homeostasis by regulating the respiratory process
- 2022
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Journal article (peer-reviewed)abstract
- Mitochondrial quality control prevents accumulation of intramitochondrial-derived reactive oxygen species (mtROS), thereby protecting cells against DNA damage, genome instability, and programmed cell death. However, underlying mechanisms are incompletely understood, particularly in fungal species. Here, we show that Cryptococcus neoformans heat shock factor 3 (CnHsf3) exhibits an atypical function in regulating mtROS independent of the unfolded protein response. CnHsf3 acts in nuclei and mitochondria, and nuclear- and mitochondrial-targeting signals are required for its organelle-specific functions. It represses the expression of genes involved in the tricarboxylic acid cycle while promoting expression of genes involved in electron transfer chain. In addition, CnHsf3 responds to multiple intramitochondrial stresses; this response is mediated by oxidation of the cysteine residue on its DNA binding domain, which enhances DNA binding. Our results reveal a function of HSF proteins in regulating mtROS homeostasis that is independent of the unfolded protein response.
|
|
| 4. |
- Felsberg, Michael, 1974-, et al.
(author)
-
The Thermal Infrared Visual Object Tracking VOT-TIR2016 Challenge Results
- 2016
-
In: Computer Vision – ECCV 2016 Workshops. ECCV 2016.. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 824-849
-
Conference paper (peer-reviewed)abstract
- The Thermal Infrared Visual Object Tracking challenge 2016, VOT-TIR2016, aims at comparing short-term single-object visual trackers that work on thermal infrared (TIR) sequences and do not apply pre-learned models of object appearance. VOT-TIR2016 is the second benchmark on short-term tracking in TIR sequences. Results of 24 trackers are presented. For each participating tracker, a short description is provided in the appendix. The VOT-TIR2016 challenge is similar to the 2015 challenge, the main difference is the introduction of new, more difficult sequences into the dataset. Furthermore, VOT-TIR2016 evaluation adopted the improvements regarding overlap calculation in VOT2016. Compared to VOT-TIR2015, a significant general improvement of results has been observed, which partly compensate for the more difficult sequences. The dataset, the evaluation kit, as well as the results are publicly available at the challenge website.
|
|
| 5. |
- Gao, Xinyu, et al.
(author)
-
Thermo-Economic Performance Analysis of Modified Latent Heat Storage System for Residential Heating
- 2023
-
In: Energies. - 1996-1073. ; 16:19
-
Journal article (peer-reviewed)abstract
- Solar energy is a sustainable source that can be effectively utilized to address winter heating challenges in buildings. To ensure the efficient application of solar energy for heating purposes and to maintain reliable performance of the heating system, the integration of phase-change materials (PCMs) in thermal energy storage (TES) systems has emerged as a crucial auxiliary approach. This study focuses on the design and simulation of four TES structures: smooth, finned, metallic foam, and metallic foam-finned tubes. It explores their thermal characteristics, such as complete melting time and heat flux, under various flow conditions. Additionally, a residential building in Xi’an is selected as the object, where the proposed solar energy phase-change TES system is employed to meet the heating demand. Economic indicators, including initial investment and investment payback period, are estimated using a static evaluation method. The results highlight that the complete melting time of the TES unit with a metallic foam-finned tube is 4800 s, which is 88.3% less than the smooth tube. Finally, based on the actual project, it is determined that the metallic foam-finned heating system, with an HTF flow rate of 0.25 m/s, requires the fewest TES devices (914) and has a payback period of 13 months.
|
|
| 6. |
- Kristan, Matej, et al.
(author)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
In: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Shiwei, Tian, et al.
(author)
-
Effect of Mo Element on Microstructure and Mechanical Properties of TiAl Alloys
- 2022
-
In: Xiyou jinshu cailiao yu gongcheng. - : NORTHWEST INST NONFERROUS METAL RESEARCH. - 1002-185X. ; 51:7, s. 2336-2343
-
Journal article (peer-reviewed)abstract
- Four TiAl alloys with different Mo contents were designed, and the microstructure and mechanical properties of these MoTiAl alloys were studied by scanning electron microscope, nanoindentation, and hot compression simulation methods. Results show that with increasing the Mo content, the content of. phase is gradually decreased, while that of beta phase is gradually increased. The Mo element mainly exists in the form of beta phase in the TiAl alloy. During the hot isostatic pressing process, the Mo element is diffused from the. and a 2 phases to the beta phase. The nanoindentation hardness of Mo-TiAl alloy reaches the maximum when the Mo content is 1.59at%, and it is negatively correlated with the interlamellar space. As the content of Mo element increases, the flow stress of Mo-TiAl alloys decreases, and the TiAl alloys with 2.11at% and 3.94at% Mo addtion have poor plasticity due to the Al element segregation.
|
|
