1. |
- Generaloy, Alexander V., et al.
(author)
-
Evolution of CuI/Graphene/Ni(111) System during Vacuum Annealing
- 2015
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 119:22, s. 12434-12444
-
Journal article (peer-reviewed)abstract
- We present a combined core-level spectroscopy and low-energy electron diffraction study of the evolution of thin CuI layers on graphene/Ni(111) during annealing. It has been found that the annealing of the CuI/graphene/Ni(111) system up to 160 degrees C results in the formation of an ordered CuI overlayer with a (root 3 x root 3) R30 degrees structure on top of the graphene surface. At annealing temperatures of about 180 degrees C or higher, the CuI overlayer decomposes with a simultaneous intercalation of Cu and I atoms underneath the graphene monolayer on Ni(111). Nearly complete intercalation of graphene by Cu and I atoms can be achieved by deposition of about 20 angstrom of CuI, followed by annealing at 200 degrees C. The intercalated graphene layer is p-doped due to interfacial iodine atoms.
|
|
2. |
|
|
3. |
- Simonov, Konstantin A., et al.
(author)
-
From Graphene Nanoribbons on Cu(111) to Nanographene on Cu(110) : Critical Role of Substrate Structure in the Bottom-Up Fabrication Strategy
- 2015
-
In: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 9:9, s. 8997-9011
-
Journal article (peer-reviewed)abstract
- Bottom-up strategies can be effectively implemented for the fabrication of atomically precise graphene nanoribbons. Recently, using 10,10'-dibromo-9,9'-bianthracene (DBBA) as a molecular precursor to grow armchair nanoribbons on Au(111) and Cu(111), we have shown that substrate activity considerably affects the dynamics of ribbon formation, nonetheless without significant modifications in the growth mechanism. In this paper we compare the on-surface reaction pathways for DBBA molecules on Cu(111) and Cu(110). Evolution of both systems has been studied via a combination of core-level X-ray spectroscopies, scanning tunneling microscopy, and theoretical calculations. Experimental and theoretical results reveal a significant increase in reactivity for the open and anisotropic Cu(110) surface in comparison with the close-packed Cu(111). This increased reactivity results in a predominance of the molecular substrate interaction over the intermolecular one, which has a critical impact on the transformations of DBBA on Cu(110). Unlike DBBA on Cu(111), the Ullmann coupling cannot be realized for DBBA/Cu(110) and the growth of nanoribbons via this mechanism is blocked. Instead, annealing of DBBA on Cu(110) at 250 degrees C results in the formation of a new structure: quasi-zero-dimensional flat nanographenes. Each nanographene unit has dehydrogenated zigzag edges bonded to the underlying Cu rows and oriented with the hydrogen-terminated armchair edge parallel to the [1-10] direction. Strong bonding of nanographene to the substrate manifests itself in a high adsorption energy of -12.7 eV and significant charge transfer of 3.46e from the copper surface. Nanographene units coordinated with bromine adatoms are able to arrange in highly regular arrays potentially suitable for nanotemplating.
|
|
4. |
- Simonov, Konstantin, 1988-, et al.
(author)
-
Effect of Substrate Chemistry on the Bottom-Up Fabrication of Graphene Nanoribbons : Combined Core-Level Spectroscopy and STM Study
- 2014
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 118:23, s. 12532-12540
-
Journal article (peer-reviewed)abstract
- Atomically precise graphene nanoribbons (GNRs) can be fabricated via thermally induced polymerization of halogen containing molecular precursors on metal surfaces. In this paper the effect of substrate reactivity on the growth and structure of armchair GNRs (AGNRs) grown on inert Au(111) and active Cu(111) surfaces has been systematically studied by a combination of core-level X-ray spectroscopies and scanning tunneling microscopy. It is demonstrated that the activation threshold for the dehalogenation process decreases with increasing catalytic activity of the substrate. At room temperature the 10,10'-dibromo-9,9'-bianthracene (DBBA) precursor molecules on Au(111) remain intact, while on Cu(111) a complete surface-assisted dehalogenation takes place. Dehalogenation of precursor molecules on Au(111) only starts at around 80 degrees C and completes at 200 degrees C, leading to the formation of linear polymer chains. On Cu(111) tilted polymer chains appear readily at room temperature or slightly elevated temperatures. Annealing of the DBBA/Cu(111) above 100 degrees C leads to intramolecular cyclodehydrogenation and formation of flat AGNRs at 200 degrees C, while on the Au(111) surface the formation of GNRs takes place only at around 400 degrees C. In STM, nanoribbons have significantly reduced apparent height on Cu(111) as compared to Au(111), 70 +/- 11 pm versus 172 +/- 14 pm, independently of the bias voltage. Moreover, an alignment of GNRs along low-index crystallographic directions of the substrate is evident for Cu(111), while on Au(111) it is more random. Elevating the Cu(111) substrate temperature above 400 degrees C results in a dehydrogenation and subsequent decomposition of GNRs; at 750 degrees C the dehydrogenated carbon species self-organize in graphene islands. In general, our data provide evidence for a significant influence of substrate reactivity on the growth dynamics of GNRs.
|
|
5. |
|
|