SwePub - search: L773:2046 2069

Enumeration	Reference	Cover	Find
1.	Abid, Abdul Rahman, et al. (author) The effect of relative humidity on CaCl2 nanoparticles studied by soft X-ray absorption spectroscopy 2021 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 11:4, s. 2103-2111 Journal article (peer-reviewed)abstract Ca- and Cl-containing nanoparticles are common in atmosphere, originating for example from desert dust and sea water. The properties and effects on atmospheric processes of these aerosol particles depend onthe relative humidity (RH) as they are often both hygroscopic and deliquescent. We present here a study of surface structure of free-flying CaCl2 nanoparticles (CaCl2-NPs) in the 100 nm size regime prepared at different humidity levels (RH: 11–85%). We also created mixed nanoparticles by aerosolizing a solution ofCaCl2 and phenylalanine (Phe), which is a hydrophobic amino acid present in atmosphere. Information of hydration state of CaCl2-NPs and production of mixed CaCl2 + Phe nanoparticles was obtained using soft X-ray absorption spectroscopy (XAS) at Ca 2p, Cl 2p, C 1s, and O 1s edges. We also report Ca 2p andCl 2p X-ray absorption spectra of an aqueous CaCl2 solution. The O 1s X-ray absorption spectra measured from hydrated CaCl2-NPs resemble liquid-like water spectrum, which is heavily influenced by the presence of ions. Core level spectra of Ca2+ and Cl- ions do not show a clear dependence of % RH, indicating that the first coordination shell remains similar in all measured hydrated CaCl2-NPs, but they differ from aqueous solution and solid CaCl2.
2.	Adam, Rania Elhadi, 1978-, et al. (author) Graphene-based plasmonic nanocomposites for highly enhanced solar-driven photocatalytic activities 2019 In: RSC Advances. - Cambridge : Royal Meteorological Society. - 2046-2069. ; 9:52, s. 30585-30598 Journal article (peer-reviewed)abstract High-efficiency photocatalysts are crucial for the removal of organic pollutants and environmental sustainability. In the present work, we report on a new low-temperature hydrothermal chemical method, assisted by ultrasonication, to synthesize disruptive plasmonic ZnO/graphene/Ag/AgI nanocomposites for solar-driven photocatalysis. The plasmonic nanocomposites were investigated by a wide range of characterization techniques, confirming successful formation of photocatalysts with excellent degradation efficiency. Using Congo red as a model dye molecule, our experimental results demonstrated a photocatalytic reactivity exceeding 90% efficiency after one hour simulated solar irradiation. The significantly enhanced degradation efficiency is attributed to improved electronic properties of the nanocomposites by hybridization of the graphene and to the addition of Ag/AgI which generates a strong surface plasmon resonance effect in the metallic silver further improving the photocatalytic activity and stability under solar irradiation. Scavenger experiments suggest that superoxide and hydroxyl radicals are responsible for the photodegradation of Congo red. Our findings are important for the fundamental understanding of the photocatalytic mechanism of ZnO/graphene/Ag/AgI nanocomposites and can lead to further development of novel efficient photocatalyst materials.
3.	Adam, Rania E., et al. (author) Graphene-based plasmonic nanocomposites for highly enhanced solar-driven photocatalytic activities 2019 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 9:52, s. 30585-30598 Journal article (peer-reviewed)abstract High-efficiency photocatalysts are crucial for the removal of organic pollutants and environmental sustainability. In the present work, we report on a new low-temperature hydrothermal chemical method, assisted by ultrasonication, to synthesize disruptive plasmonic ZnO/graphene/Ag/AgI nanocomposites for solar-driven photocatalysis. The plasmonic nanocomposites were investigated by a wide range of characterization techniques, confirming successful formation of photocatalysts with excellent degradation efficiency. Using Congo red as a model dye molecule, our experimental results demonstrated a photocatalytic reactivity exceeding 90% efficiency after one hour simulated solar irradiation. The significantly enhanced degradation efficiency is attributed to improved electronic properties of the nanocomposites by hybridization of the graphene and to the addition of Ag/AgI which generates a strong surface plasmon resonance effect in the metallic silver further improving the photocatalytic activity and stability under solar irradiation. Scavenger experiments suggest that superoxide and hydroxyl radicals are responsible for the photodegradation of Congo red. Our findings are important for the fundamental understanding of the photocatalytic mechanism of ZnO/graphene/Ag/AgI nanocomposites and can lead to further development of novel efficient photocatalyst materials.
4.	Adolfsson, Karin H., et al. (author) Valorization of cellulose and waste paper to graphene oxide quantum dots 2015 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 5:34, s. 26550-26558 Journal article (peer-reviewed)abstract Biobased graphene oxide quantum dots (GOQD) were derived from cellulose via carbon nanospheres (CN) as intermediate products. Solid CN were synthesized from cellulose through microwave-assisted hydrothermal degradation of alpha-cellulose with H2SO4 as a catalyst at 160 degrees C. The obtained CN were further utilized for the synthesis of GOQD by a two-step reaction including 30 minutes of sonication followed by heating at 90 degrees C under O-rich acidic conditions (HNO3). This process broke down the 3D CN to 2D GOQD. The size of the synthesized GOQD was controlled by the heating time, reaching a dot diameter of 3.3 nm and 1.2 nm after 30 and 60 minutes of heating, respectively. The synthesis process and products were characterized by multiple analytical techniques including FTIR, TGA, SEM, TEM, XPS, XRD, BET, DLS and AFM. Interesting optical properties in aqueous solutions were demonstrated by UV/Vis and fluorescence spectroscopy. Finally we demonstrated that corresponding GOQD can be synthesized from waste paper. This production route thus uses renewable and cheap starting materials and relatively mild synthesis procedures leads to instant nanometric production of 2D dots. In addition it enables recycling of low quality waste to value-added products.
5.	Aftab, Umair, et al. (author) Nickel-cobalt bimetallic sulfide NiCo(2)S(4)nanostructures for a robust hydrogen evolution reaction in acidic media 2020 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:37, s. 22196-22203 Journal article (peer-reviewed)abstract There are many challenges associated with the fabrication of efficient, inexpensive, durable and very stable nonprecious metal catalysts for the hydrogen evolution reaction (HER). In this study, we have designed a facile strategy by tailoring the concentration of precursors to successfully obtain nickel-cobalt bimetallic sulfide (NiCo2S4) using a simple hydrothermal method. The morphology of the newly prepared NiCo(2)S(4)comprised a mixture of microparticles and nanorods, which were few microns in dimension. The crystallinity of the composite sample was found to be excellent with a cubic phase. The sample that contained a higher amount of cobalt compared to nickel and produced single-phase NiCo(2)S(4)exhibited considerably improved HER performance. The variation in the salt precursor concentration during the synthesis of a material is a simple methodology to produce a scalable platinum-free catalyst for HER. The advantageous features of the multiple active sites of cobalt in the CN-21 sample as compared to that for pristine CoS and NiS laid the foundation for the provision of abundant active edges for HER. The composite sample produced a current density of 10 mA cm(-2)at an overpotential of 345 mV. Also, it exhibited a Tafel value of 60 mV dec(-1), which predominantly ensured rapid charge transfer kinetics during HER. CN-21 was highly durable and stable for 30 hours. Electrochemical impedance spectroscopy showed that the charge transfer resistance was 21.88 ohms, which further validated the HER polarization curves and Tafel results. CN-21 exhibited a double layer capacitance of 4.69 mu F cm(-2)and a significant electrochemically active surface area of 134.0 cm(2), which again supported the robust efficiency for HER. The obtained results reveal that our developed NiCo(2)S(4)catalyst has a high density of active edges, and it is a non-noble metal catalyst for the hydrogen evolution reaction. The present findings provide an alternative strategy and an active nonprecious material for the development of energy-related applications.
6.	Agbaje, Oluwatoosin B. A., et al. (author) Characterization of organophosphatic brachiopod shells : spectroscopic assessment of collagen matrix and biomineral components 2020 In: RSC Advances. - 2046-2069. ; 10, s. 38456-38467 Journal article (peer-reviewed)abstract The shells of linguloid brachiopods such as Lingula and Discinisca are inorganic–organic nanocomposites with a mineral phase of calcium phosphate (Ca-phosphate). Collagen, the main extracellular matrix in Ca-phosphatic vertebrate skeletons, has not previously been clearly resolved at the molecular level in organophosphatic brachiopods. Here, modern and recently-alive linguliform brachiopod shells of Lingula and Discinisca have been studied by microRaman spectroscopy, Fourier transform infrared spectroscopy, field emission gun scanning electron microscopy, and thermal gravimetric analysis. For the first time, biomineralized collagen matrix and Ca-phosphate components were simultaneously identified, showing that the collagen matrix is an important moiety in organophosphatic brachiopod shells, in addition to prevalent chitin. Stabilized nanosized apatitic biominerals (up to ∼50 nm) permeate the framework of organic fibrils. There is a ∼2.5-fold higher wt% of carbonate (CO32−) in Lingula versus Discinisca shells. Both microRaman spectroscopy and infrared spectra show transient amorphous Ca-phosphate and octacalcium phosphate components. For the first time, trivalent moieties at ∼1660 cm−1 and divalent moieties at ∼1690 cm−1 in the amide I spectral region were identified. These are related to collagen cross-links that are abundant in mineralized tissues, and could be important features in the biostructural and mechanical properties of Ca-phosphate shell biominerals. This work provides a critical new understanding of organophosphatic brachiopod shells, which are some of the earliest examples of biomineralization in still-living animals that appeared in the Cambrian radiation.
7.	Aguilar-Sanchez, Andrea, et al. (author) Charged ultrafiltration membranes based on TEMPO-oxidized cellulose nanofibrils/poly(vinyl alcohol) antifouling coating 2021 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 11:12, s. 6859-6868 Journal article (peer-reviewed)abstract This study reports the potential of TEMPO-oxidized cellulose nanofibrils (T-CNF)/poly(vinyl alcohol) (PVA) coatings to develop functionalized membranes in the ultrafiltration regime with outstanding antifouling performance and dimensional/pH stability. PVA acts as an anchoring phase interacting with the polyethersulfone (PES) substrate and stabilizing for the hygroscopic T-CNF via crosslinking. The T-CNF/PVA coated PES membranes showed a nano-textured surface, a change in the surface charge, and improved mechanical properties compared to the original PES substrate. A low reduction (4%) in permeance was observed for the coated membranes, attributable to the nanometric coating thickness, surface charge, and hydrophilic nature of the coated layer. The coated membranes exhibited charge specific adsorption driven by electrostatic interaction combined with rejection due to size exclusion (MWCO 530 kDa that correspond to a size of similar to 35-40 nm). Furthermore, a significant reduction in organic fouling and biofouling was found for T-CNF/PVA coated membranes when exposed to BSA and E. coli. The results demonstrate the potential of simple modifications using nanocellulose to manipulate the pore structure and surface chemistry of commercially available membranes without compromising on permeability and mechanical stability.
8.	Ahlgren, Sara, 1979-, et al. (author) EGF-targeting lipodisks for specific delivery of poorly water-soluble anticancer agents to tumour cells 2017 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 7:36, s. 22178-22186 Journal article (peer-reviewed)abstract Concerns regarding poor aqueous solubility, high toxicity and lack of specificity impede the translation of many hydrophobic anticancer agents into safe and effective anticancer drugs. The application of colloidal drug delivery systems, and in particular the use of lipid-based nanocarriers, has been identified as a promising means to overcome these issues. PEG-stabilized lipid nanodisks (lipodisks) have lately emerged as a novel type of biocompatible, nontoxic and adaptable drug nanocarrier. In this study we have explored the potential of lipodisks as a platform for formulation and tumour targeted delivery of hydrophobic anticancer agents. Using curcumin as a model compound, we show that lipodisks can be loaded with substantial amounts of hydrophobic drugs (curcumin/lipid molar ratio 0.15). We demonstrate moreover that by deliberate choice of preparation protocols the lipodisks can be provided with relevant amounts of targeting proteins, such as epidermal growth factor (EGF). Data from in vitro cell studies verify that such EGF-decorated curcumin-loaded lipodisks are capable of EGF-receptor specific targeting of human A-431 tumour cells, and strongly suggest that the interaction between the lipodisks and the tumour cells results in receptor-mediated internalization of the disks and their cargo.
9.	Ahlinder, Linnea, et al. (author) Graphene oxide nanoparticle attachment and its toxicity on living lung epithelial cells 2015 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 5:73, s. 59447-59457 Journal article (peer-reviewed)abstract Since its discovery, graphene and its oxidized form, graphene oxide (GO), have attracted interest in a wide range of technical applications. Concerns about their potential toxicity calls for scrutinized studies, but hitherto conflicting results have been reported which partly may be due to variations of synthesis and exposure procedures. Here we report on the attachment and toxicity of contamination-free graphene oxide nanoparticles (GONP) in living lung epithelial cells. The synthesis of chemically pure GONP was made by an improvement of the Hummer's method based on graphene exfoliated from graphite using high-intensity ultrasonication, resulting in two dimensional sheets with a lateral dimension in the range 200 nm to 3 mu m and thickness of 0.9 nm. Confocal Raman spectroscopy combined with multivariate analysis was used to study the interaction of GONP and living cells. It is shown that overlapping Raman bands due to GONPs and biomolecules in the cells can clearly be separated with this approach. Orthogonal partial least squares discriminant analysis was used to compare spectral data collected from cells exposed to GONP with spectral data collected from non-exposed control cells, and spectral data from cells exposed to a surfactant known to induce apoptosis. Our analyses show that GONP readily attach to the cells, forming sheets which cover a large fraction of the cell surfaces, and induce small chemical changes. In particular, chemical modifications of proteins and lipids in lung epithelial cells are inferred. GONPs do not, however, decrease cell viability. In contrast, enhanced cell proliferation is observed. Our results shed new light on the interactions of GO, and in contrast to some previous reports, suggest that GO is not toxic. The hyperspectral Raman spectroscopy analysis employed here should be applicable for other fields in nanomedicine as a label-free non-perturbing analytical method.
10.	Akan, Rabia, et al. (author) Reaction control of metal-assisted chemical etching for silicon-based zone plate nanostructures 2018 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 8:23, s. 12628-12634 Journal article (peer-reviewed)abstract Metal-assisted chemical etching (MACE) reaction parameters were investigated for the fabrication of specially designed silicon-based X-ray zone plate nanostructures using a gold catalyst pattern and etching solutions composed of HF and H2O2. Etching depth, zone verticality and zone roughness were studied as a function of etching solution composition, temperature and processing time. Homogeneous, vertical etching with increasing depth is observed at increasing H2O2 concentrations and elevated processing temperatures, implying a balance in the hole injection and silica dissolution kinetics at the gold-silicon interface. The etching depth decreases and zone roughness increases at the highest investigated H2O2 concentration and temperature. Possible reasons for these observations are discussed based on reaction chemistry and zone plate design. Optimum MACE conditions are found at HFH2O2 concentrations of 4.7 M:0.68 M and room temperature with an etching rate of ≈0.7 μm min-1, which is about an order of magnitude higher than previous reports. Moreover, our results show that a grid catalyst design is important for successful fabrication of vertical high aspect ratio silicon nanostructures.
11.	Akhtar, Farid, et al. (author) Aluminophosphate monoliths with high CO2-over-N2 selectivity and CO2 capture capacity 2014 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 4:99, s. 55877-55883 Journal article (peer-reviewed)abstract Monoliths of microporous aluminophosphates (AlPO4-17 and AlPO4-53) were structured by binder-free pulsed current processing. Such monoliths could be important for carbon capture from flue gas. The AlPO4-17 and AlPO4-53 monoliths exhibited a tensile strength of 1.0 MPa and a CO2 adsorption capacity of 2.5 mmol g-1 and 1.6 mmol g-1, respectively at 101 kPa and 0°C. Analyses of single component CO2 and N2 adsorption data indicated that the AlPO4-53 monoliths had an extraordinarily high CO2-over-N2 selectivity from a binary gas mixture of 15 mol% CO2 and 85 mol% N2. The estimated CO2 capture capacity of AlPO4-17 and AlPO4-53 monoliths in a typical pressure swing adsorption (PSA) process at 20°C was higher than that of the commonly used zeolite 13X granules. Under cyclic sorption conditions, AlPO4-17 and AlPO4-53 monoliths were regenerated by lowering the pressure of CO2. Regeneration was done without application of heat, which would regenerate them to their full capacity for CO2 adsorption.
12.	Alanis, Andrés, et al. (author) Plasma surface-modification of cellulose nanocrystals : a green alternative towards mechanical reinforcement of ABS 2019 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 9:30, s. 17417-17424 Journal article (peer-reviewed)abstract This article proposes a strategy to functionalize cellulose nanocrystals by means of plasma-surface modification utilizing monomers of different nature: caprolactone, styrene and farnesene. The surface characteristics of the nanocrystals were studied by different techniques including XPS, FTIR and STEM, demonstrating that this technique allows a successful functionalization, yielding homogenous functionalization which does not alter the rod-like shape of the nanocrystals, and therefore their anisotropic behavior. We have furthermore studied the employment of the modified nanocrystals as reinforcement additive of ABS, which significantly enhanced the impact resistance of the thermoplastic, which could have great implications for industrial applications.
13.	Albaqami, Munirah D., et al. (author) The fast nucleation/growth of Co3O4 nanowires on cotton silk : the facile development of a potentiometric uric acid biosensor 2022 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 12:29, s. 18321-18332 Journal article (peer-reviewed)abstract In this study, we have used cotton silk as a source of abundant hydroxyl groups for the fast nucleation/growth of cobalt oxide (Co3O4) nanowires via a hydrothermal method. The crystal planes of the Co3O4 nanowires well matched the cubic phase. The as-synthesized Co3O4 nanowires mainly contained cobalt and oxygen elements and were found to be highly sensitive towards uric acid in 0.01 M phosphate buffer solution at pH 7.4. Importantly, the Co3O4 nanowires exhibited a large surface area, which was heavily utilized during the immobilization of the enzyme uricase via a physical adsorption method. The potentiometric response of the uricase-immobilizing Co3O4 nanowires was measured in the presence of uric acid (UA) against a silver/silver chloride (Ag/AgCl) reference electrode. The newly fabricated uric acid biosensor possessed a low limit of detection of 1.0 +/- 0.2 nM with a wide linear range of 5 nM to 10 mM and sensitivity of 30.6 mV dec(-1). Additionally, several related parameters of the developed uric acid biosensor were investigated, such as the repeatability, reproducibility, storage stability, selectivity, and dynamic response time, and these were found to be satisfactory. The good performance of the Co3O4 nanowires was verified based on the fast charge-transfer kinetics, as confirmed via electrochemical impedance spectroscopy. The successful practical use of the uric acid biosensor was demonstrated based on the recovery method. The observed performance of the uricase-immobilizing Co3O4 nanowires revealed that they could be considered as a promising and alternative tool for the detection of uric acid under both in vitro and in vivo conditions. Also, the use of cotton silk as a source of abundant hydroxyl groups may be considered for the remarkably fast nucleation/growth of other metal-oxide nanostructures, thereby facilitating the fabrication of functional electrochemical devices, such as batteries, water-splitting devices, and supercapacitors.
14.	Alexandersson, Elin, et al. (author) Band-selective NMR experiments for suppression of unwanted signals in complex mixtures 2020 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 10, s. 32511-32515 Journal article (peer-reviewed)abstract Band-selective NMR experiments are presented that allow selective suppression of unwanted signals (SUN) from the spectra of complex metabolite mixtures. As a result, spectral overlap and dynamic range problems are substantially reduced and low-intensity signals normally covered by dominant signals can be observed. The usefulness of the experiments is exemplified with selective suppression of sugar signals from the NMR spectra of fruit juice and a plant sample. Other possible applications include blood, milk, and wine samples.
15.	Ali, Hala R., et al. (author) Effects of macrophage polarization on gold nanoparticle-assisted plasmonic photothermal therapy 2021 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 11:40, s. 25047-25056 Journal article (peer-reviewed)abstract Tumor associated macrophages (TAM) are key pathogenic factors in neoplastic diseases. They are known to have plasticity and can polarize into two opposing phenotypes, including the tumoricidal M1 and the protumoral M2 phenotypes with high prevalence of M2-phentoypes in patients with poor prognosis. Strategies for targeting M2-TAM may consequently increase the efficacy of therapeutic strategies for cancer treatment. Gold nanorod-assisted plasmonic photothermal therapy (PPTT) has emerged as a promising treatment for cancer but the effects of macrophage polarization parameters in the performance of this new treatment modality is still unknown. Herein, human monocytic THP-1 cells were polarized into two opposite phenotypic macrophages (M1-TAM and M2-TAM) and their response to PPTT was examined. M2-TAM exhibits a three-fold increase in AuNP uptake compared to M1-TAM. Laser irradiation results in selective killing of pro-tumoral M2-TAM after treatment with AuNPs with limited effects on anti-tumoral M1-TAM. A positive correlation between the expression of CD206 marker and the AuNP uptake may indicate the role of CD206 in facilitating AuNP uptake. Our findings also suggest that the differences in AuNP avidity and uptake between the M1-TAM and M2-TAM phenotypes may be the rationale behind the effectiveness of PPTT in the treatment of solid tumors.
16.	Ali Soomro, Razium, et al. (author) A highly selective and sensitive electrochemical determination of melamine based on succinic acid functionalized copper oxide nanostructures 2015 In: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 5:127, s. 105090-105097 Journal article (peer-reviewed)abstract This study presents the development of a highly selective and sensitive electrochemical sensor for the determination of melamine from aqueous environments. The sensor system is based on functionalised marigold-like CuO nanostructures fabricated using a controlled hydrothermal process, where the utilised succinic acid is considered to play a dual role as a functionalising and growth controlling agent (modifier). The fabricated nanostructures exhibit sharp and well-ordered structural features with dimensions (thickness) in the range of 10-50 nm. The sensor system exhibits strong linearity within the concentration range of 0.1 x 10(-9) to 5.6 x 10(-9) M and demonstrates an excellent limit of detection up to 0.1 x 10(-10) M. The extreme selectivity and sensing capability of the developed sensor is attributed to the synergy of selective interaction between succinic acid and melamine moieties, and the high surface area of marigold-like CuO nanostructures. In addition to this, the developed sensor was also utilised for the determination of melamine from real milk samples collected from different regions of Hyderabad, Pakistan. The obtained excellent recoveries proved the feasibility of the sensor for real life applications. The sensor system offers an operative measure for detecting extremely low melamine content with high selectivity in food contents.
17.	Alvarez-Asencio, Ruben, et al. (author) Solventless synthesis of cerium oxide nanoparticles and their application in UV protective clear coatings 2020 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 10:25, s. 14818-14825 Journal article (peer-reviewed)abstract Colloidal dispersions of cerium oxide nanoparticles are of importance for numerous applications including as catalysts, chemical mechanical polishing agents and additives for UV protective and anticorrosion coatings. Here, concentrated oleate-coated cerium oxide nanoparticles (CeO2 NPs) with a uniform size have been produced by solventless thermolysis of cerium-oleate powder under low pressure at 320 °C and subsequently dispersed in hexane. Unlike any previously reported colloidal synthesis process for ceria nanoparticles, this process does not involve any toxic high boiling point organic solvent that requires subsequent removal at high cost. Although the process is very simple, highly concentrated cerium oxide nanoparticles with more than 17 wt% solid content and 70% of the theoretical yield can be easily obtained. Moreover, the size, shape and crystallinity of cerium oxide nanoparticles can be tailored by changing the thermal decomposition temperature and reaction time. Moreover, the new synthesis route developed in this study allows the synthesis of clean and dispersible ceria nanoparticles at a relatively low cost in a single step. The prepared ceria nanoparticles have an excellent UV absorption property and remain transparent to visible light, thus having the potential to replace potentially hazardous organic compounds in UV absorbing clear coatings. As a proof of concept, the prepared dispersions of cerium oxide nanoparticles in hexane were formulated into a solvent borne binder base to develop clear UV protecting coatings for light sensitive substrates. The general synthesis strategy presented in this study is generally applicable for the low-cost production of a concentrated dispersion of metal oxide nanoparticles with minimal environmental impact.
18.	Amin, Sidra, et al. (author) A practical non-enzymatic urea sensor based on NiCo 2 O 4 nanoneedles 2019 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:25, s. 14443-14451 Journal article (peer-reviewed)abstract We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo 2 O 4 ) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 μM) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo 2 O 4 nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo 2 O 4 nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo 2 O 4 nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co 3 O 4 . The GCE-modified electrode is highly sensitive towards urea, with a linear response (R 2 = 0.99) over the concentration range 0.01-5 mM and with a detection limit of 1.0 μM. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.
19.	Amin, Sidra, et al. (author) A practical non-enzymatic urea sensor based on NiCo2O4 nanoneedles 2019 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:25, s. 14443-14451 Journal article (peer-reviewed)abstract We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo2O4) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 mu M) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo2O4 nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo2O4 nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo2O4 nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co3O4. The GCE-modified electrode is highly sensitive towards urea, with a linear response (R-2 = 0.99) over the concentration range 0.01-5 mM and with a detection limit of 1.0 mu M. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.
20.	Amin, Sidra, et al. (author) A practical non-enzymatic urea sensor based on NiCo2O4 nanoneedles 2019 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:25, s. 14443-14451 Journal article (peer-reviewed)abstract We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo2O4) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 μM) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo2O4 nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo2O4 nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo2O4 nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co3O4. The GCE-modified electrode is highly sensitive towards urea, with a linear response (R2 = 0.99) over the concentration range 0.01–5 mM and with a detection limit of 1.0 μM. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.
21.	Anaspure, Prasad, et al. (author) Palladium nanoparticles immobilized on polyethylenimine-derivatized gold surfaces for catalysis of Suzuki reactions : development and application in a lab-on-a-chip context 2021 In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 11:56, s. 35161-35164 Journal article (peer-reviewed)abstract Gold surface-bound hyperbranched polyethyleneimine (PEI) films decorated with palladium nanoparticles have been used as efficient catalysts for a series of Suzuki reactions. This thin film-format demonstrated good catalytic efficiency (TON up to 3.4 x 10(3)) and stability. Incorporation into a quartz crystal microbalance (QCM) instrument illustrated the potential for using this approach in lab-on-a-chip-based synthesis applications.
22.	Andersson, Richard, et al. (author) Superparamagnetic [sic] nanofibers by electrospinning 2016 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:26, s. 21413-21422 Journal article (peer-reviewed)abstract The preparation of superparamagnetic thin fibers by electrospinning dispersions of nanosized magnetite (Fe3O4, SPIO/USPIO) in a PMMA/PEO polymer solution is reported. The saturation magnetization and coercivity were not affected by the concentration (0, 1, 10, 20 wt%) or fiber orientation, showing hysteresis loops with high magnetization (64 A m(2) kg(-1) @ 500 kA m(-1)) and record low coercivity (20 A m(-1)). AC susceptibility measurements vs. temperature at frequencies from 60 to 2 kHz confirmed superparamagnetism. The mechanical properties were only slightly dependent on the particle concentration because the nanoparticles were separately encapsulated by the polymer. A uniform fibre fracture cross section was found at all the investigated particle contents, which suggests a strong interaction at the polymer/particle interface. A theoretical value of the magnetic low field susceptibility was calculated from the Langevin function and compared with measured values. The results show a distinct but concentration-independent anisotropy, favoring magnetization along the fiber orientation with no sign of exchange interaction, explained by complete nanoparticle separation. Superparamagnetism cannot be inferred from particle size alone, so a relevant interpretation and criterion for superparamagnetism is presented, in accordance with Neel's original definition. From the measurements, it can be concluded that magnetic characterization can be used to elucidate the material morphology beyond the resolution of available microscopy techniques (TEM and SEM).
23.	Angelico, R., et al. (author) Flow-induced structures observed in a viscoelastic reverse wormlike micellar system by magnetic resonance imaging and NMR velocimetry 2016 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:40, s. 33339-33347 Journal article (peer-reviewed)abstract The aim of the present work is to illustrate and discuss an application of rheo-NMR techniques in the investigation of the flow micro-morphology of a rheo-thinning fluid. The viscoelastic material is composed by weakly hydrated nonionic Wormlike Micelles (WM), stabilized by the biocompatible phospholipid in an organic solvent (lecithin organogel). By applying rheo-NMR techniques, such as micro-imaging and flow velocimetry in Couette flow, to lecithin organogels in the concentrated isotropic phase, a new phase nucleating inhomogeneously at the inner rotating cylinder showing periodic fluctuations in space in some cases, has been identified for applied shear rates within the isotropic-nematic stress plateau. On the other hand, evident slippage phenomena have been found in flow regimes consistent with a full shear-induced nematic state. Bulk rheometric investigations executed in oscillatory, steady state and transient mode have been finally carried out to bridge different flow micro-heterogeneities detected by rheo-NMR with a variety of mechanical responses manifested by lecithin WM.
24.	Antosiewicz, Tomasz, 1981, et al. (author) Optical enhancement of plasmonic activity of catalytic metal nanoparticles 2015 In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 5:9, s. 6378-6384 Journal article (peer-reviewed)abstract Noble metals have recently been shown to drive direct photocatalytic reactions in which they both provide hot electrons via the localized surface plasmon resonance (LSPR) and the catalytically active site. Catalytic reactions are also possible on other metals such as platinum or rhodium which, however, exhibit rather poor plasmonic properties (low field enhancements, low resonance quality factors) and their LSPR for nanometer sized particles occurs in the UV, an unfavourable effect when considering sunlight as a photon source. By coupling the LSPR response of catalytic metal nanoparticles to that of a silver nanoparticle we can excite a hybridized resonance that matches the spectral characteristic of the light source and light absorption in the catalytic metal is enhanced by up to one order of magnitude. This is shown for a number of catalytic metals and is further discussed for model Drude and Drude-Lorentz materials. These results provide guidelines for designing catalytic metal nanostructures which absorb the solar spectrum very efficiently.
25.	Anugwom, Ikenna, et al. (author) Switchable ionic liquids (SILs) based on glycerol and acid gases 2011 In: RSC Advances. - : The Royal Society of Chemistry. - 2046-2069. ; 1:3, s. 452-457 Journal article (peer-reviewed)abstract New types of switchable ionic liquids (SILs), containing 1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU), glycerol and an acid gas (CO2, SO2), were synthesized and characterized in this study. [DBU][Carbonate] or [sulfonate] were easily synthesized from a non-ionic mixture of molecular organic polyol and amidine base upon bubbling of an acid gas (CO2, SO2). Moreover, they were switched back to the original molecular solvents by flushing out the acid gas (CO2, SO2) by heating and/or bubbling an inert gas such as N2 through it. The structures of the SILs were confirmed by NMR and FTIR. The change from low polarity (molecular solvent) to high polarity (Switchable Ionic Liquid, SIL) was also indicated by the changes in properties, such as viscosity and miscibility with different organic solvents. The decomposition temperatures of the SILs were determined by means of Thermo Gravimetric Analysis (TGA) and gave values in the range of 50 °C and 120 °C for DBU-glycerol-CO2 (SIL1) and DBU-glycerol-SO2 (SIL2), respectively. Due to the reasonable decomposition temperatures, these novel SILs can be employed in multiple applications.

Skapa referenser, mejla, bekava och länka

Permalink

Träfflista för sökning "L773:2046 2069 "

Refine your search

Year