| 1. |
- Skripnyak, Natalia, 1991-, et al.
(author)
-
Mixing enthalpies of alloys with dynamical instability : bcc Ti-V system
- 2020
-
In: Acta Materialia. - : Elsevier BV. - 1359-6454 .- 1873-2453. ; 188, s. 145-154
-
Journal article (peer-reviewed)abstract
- Enthalpy of mixing is among the key materials parameters to determine phase stability and phase transformations in solid solutions. The possibility to predict it from first principles in the framework of the density functional theory is one of the corner stones of the modern materials modeling and the future data-driven materials design. Here we have considered body-centered cubic (bcc) Ti-V alloys, a system with high potential for aerospace, automotive biomedical and energy applications, which is known to exhibit the dynamical instability of the crystal lattice for Ti-rich alloys at low temperature. We have calculated the mixing enthalpies ΔH of bcc Ti-V alloys in the whole interval of concentration at high temperature using ab initio molecular dynamics (AIMD) simulations. A comparison with state-of-the-art static calculations at temperature 0 K shows drastic difference between the two methods: while AIMD predicts positive values of ΔH in the whole range of concentrations, the static zero-temperature simulations result in negative values of ΔH for Ti-rich alloys. We have measured the mixing enthalpy of bcc Ti-V alloys experimentally at 1073 K using an isoperibol high temperature Tian-Calvet calorimeter and found that the enthalpies are positive, in agreement with our finite temperature AIMD calculations. We attribute the failure of the standard static calculations of ΔH to lattice distortions associated with the dynamical instability of bcc Ti-V alloys at zero temperature and argue that the effect should be generally important in theoretical predictions of thermodynamic properties, especially for systems with dynamical instability.
|
|
| 2. |
- Ji, Fuxiang, 1991-, et al.
(author)
-
Remarkable Thermochromism in the Double Perovskite Cs2NaFeCl6
- 2023
-
In: Advanced Optical Materials. - : Wiley-Blackwell. - 2162-7568 .- 2195-1071.
-
Journal article (peer-reviewed)abstract
- Lead-free halide double perovskites (HDPs) have emerged as a new generation of thermochromic materials. However, further materials development and mechanistic understanding are required. Here, a highly stable HDP Cs2NaFeCl6 single crystal is synthesized, and its remarkable and fully reversible thermochromism with a wide color variation from light-yellow to black over a temperature range of 10 to 423 K is investigated. First-principles, density functional theory (DFT)-based calculations indicate that the thermochromism in Cs2NaFeCl6 is an effect of electron–phonon coupling. The temperature sensitivity of the bandgap in Cs2NaFeCl6 is up to 2.52 meVK−1 based on the Varshni equation, which is significantly higher than that of lead halide perovskites and many conventional group-IV, III–V semiconductors. Meanwhile, this material shows excellent environmental, thermal, and thermochromic cycle stability. This work provides valuable insights into HDPs' thermochromism and sheds new light on developing efficient thermochromic materials.
|
|
| 3. |
- Ji, Fuxiang, 1991-, et al.
(author)
-
Remarkable Thermochromism in the Double Perovskite Cs2NaFeCl6
- 2024
-
In: Advanced Optical Materials. - : John Wiley & Sons. - 2162-7568 .- 2195-1071. ; 12:8
-
Journal article (peer-reviewed)abstract
- Lead-free halide double perovskites (HDPs) have emerged as a new generation of thermochromic materials. However, further materials development and mechanistic understanding are required. Here, a highly stable HDP Cs2NaFeCl6 single crystal is synthesized, and its remarkable and fully reversible thermochromism with a wide color variation from light-yellow to black over a temperature range of 10 to 423 K is investigated. First-principles, density functional theory (DFT)-based calculations indicate that the thermochromism in Cs2NaFeCl6 is an effect of electron-phonon coupling. The temperature sensitivity of the bandgap in Cs2NaFeCl6 is up to 2.52 meVK(-1) based on the Varshni equation, which is significantly higher than that of lead halide perovskites and many conventional group-IV, III-V semiconductors. Meanwhile, this material shows excellent environmental, thermal, and thermochromic cycle stability. This work provides valuable insights into HDPs' thermochromism and sheds new light on developing efficient thermochromic materials.
|
|
| 4. |
- Davidsson, Joel, 1989-
(author)
-
Color Centers in Semiconductors for Quantum Applications : A High-Throughput Search of Point Defects in SiC
- 2021
-
Doctoral thesis (other academic/artistic)abstract
- Point defects in semiconductors have been and will continue to be relevant for applications. Shallow defects realize transistors, which power the modern age of information, and in the not-too-distant future, deep-level defects could provide the foundation for a revolution in quantum information processing. Deep-level defects (in particular color centers) are also of interest for other applications such as a single photon emitter, especially one that emits at 1550 nm, which is the optimal frequency for long-range communication via fiber optics.First-principle calculations can predict the energies and optical properties of point defects. I performed extensive convergence tests for magneto-optical properties, such as zero phonon lines, hyperfine coupling parameters, and zero-field splitting for the four different configurations of the divacancy in 4H-SiC. Comparing the converged results with experimental measurements, a clear identification of the different configurations was made. With this approach, I also identified all configurations for the silicon vacancy in 4H-SiC as well as the divacancy and silicon vacancy in 6H-SiC. The same method was further used to identify two additional configurations belonging to the divacancy present in a 3C stacking fault inclusion in 4H-SiC. I extended the calculated properties to include the transition dipole moment which provides the polarization, intensity, and lifetime of the zero phonon lines. When calculating the transition dipole moment, I show that it is crucial to include the self-consistent change of the electronic orbitals in the excited state due to the geometry relaxation. I tested the method on the divacancy in 4H-SiC, further strengthening the previous identification and providing accurate photoluminescence intensities and lifetimes.Finding stable point defects with the right properties for a given application is a challenging task. Due to the vast number of possible point defects present in bulk semiconductor materials, I designed and implemented a collection of automatic workflows to systematically investigate any point defects. This collection is called ADAQ (Automatic Defect Analysis and Qualification) and automates every step of the theoretical process, from creating defects to predicting their properties. Using ADAQ, I screened about 8000 intrinsic point defect clusters in 4H-SiC. This thesis presents an overview of the formation energy and the most relevant optical properties for these single and double point defects. These results show great promise for finding new color centers suitable for various quantum applications.
|
|
| 5. |
- Laniel, Dominique, et al.
(author)
-
Aromatic hexazine [N6]4− anion featured in the complex structure of the high-pressure potassium nitrogen compound K9N56
- 2023
-
In: Nature Chemistry. - : NATURE PORTFOLIO. - 1755-4330 .- 1755-4349. ; 15:5, s. 641-646
-
Journal article (peer-reviewed)abstract
- The recent high-pressure synthesis of pentazolates and the subsequent stabilization of the aromatic [N-5](-) anion at atmospheric pressure have had an immense impact on nitrogen chemistry. Other aromatic nitrogen species have also been actively sought, including the hexaazabenzene N-6 ring. Although a variety of configurations and geometries have been proposed based on ab initio calculations, one that stands out as a likely candidate is the aromatic hexazine anion [N-6](4-). Here we present the synthesis of this species, realized in the high-pressure potassium nitrogen compound K9N56 formed at high pressures (46 and 61 GPa) and high temperature (estimated to be above 2,000 K) by direct reaction between nitrogen and KN3 in a laser-heated diamond anvil cell. The complex structure of K9N56-composed of 520 atoms per unit cell-was solved based on synchrotron single-crystal X-ray diffraction and corroborated by density functional theory calculations. The observed hexazine anion [N-6](4-) is planar and proposed to be aromatic.
|
|
| 6. |
- Salamania, Janella, 1992-, et al.
(author)
-
Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations
- 2022
-
In: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 224
-
Journal article (peer-reviewed)abstract
- Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterizedthin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. Byhigh-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These include, besidesthe expected primary a/2{110}h110i dislocation, Shockley partial dislocations a/6{111}h112i and sessileLomer edge dislocations a/2{100}h011i. Density-functional theory and classical interatomic potentialsimulations complement STEM observations by recovering the atomic structure of the different disloca-tion types, estimating Peierls stresses, and providing insights on the chemical bonding nature at the core.The generated models of the dislocation cores suggest locally enhanced metal–metal bonding, weakenedTi-N bonds, and N vacancy-pinning that effectively reduces the mobilities of {110}h110i and {111}h112idislocations. Our findings underscore that the presence of different dislocation types and their effects onchemical bonding should be considered in the design and interpretations of nanoscale and macroscopicproperties of TiN.
|
|
| 7. |
- Dubrovinsky, Leonid, et al.
(author)
-
Materials synthesis at terapascal static pressures
- 2022
-
In: Nature. - London, United Kingdom : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 605:7909, s. 274-278
-
Journal article (peer-reviewed)abstract
- Theoretical modelling predicts very unusual structures and properties of materials at extreme pressure and temperature conditions(1,2). Hitherto, their synthesis and investigation above 200 gigapascals have been hindered both by the technical complexity of ultrahigh-pressure experiments and by the absence of relevant in situ methods of materials analysis. Here we report on a methodology developed to enable experiments at static compression in the terapascal regime with laser heating. We apply this method to realize pressures of about 600 and 900 gigapascals in a laser-heated double-stage diamond anvil cell(3), producing a rhenium-nitrogen alloy and achieving the synthesis of rhenium nitride Re7N3-which, as our theoretical analysis shows, is only stable under extreme compression. Full chemical and structural characterization of the materials, realized using synchrotron single-crystal X-ray diffraction on microcrystals in situ, demonstrates the capabilities of the methodology to extend high-pressure crystallography to the terapascal regime.
|
|
| 8. |
- Jönsson, Johan, 1989-
(author)
-
Electronic transitions and correlation effects : From pure elements to complex materials
- 2020
-
Doctoral thesis (other academic/artistic)abstract
- Macroscopic properties of real materials, such as conductivity, magneticproperties, crystal structure parameters, etc. are closely related or evendetermined by the configuration of their electrons, characterized by electronicstructure. By changing the conditions, e.g, pressure, temperature, magnetic/electric field, chemical doping, etc. one can modify the electronic structure ofsolids and therefore induce a phase transition(s) between different electronic andmagnetic states. One famous example is a Mott metal-to-insulator phase transition,at which a material undergoes a significant, often many orders of magnitude, changeof conductivity caused by the interplay between itineracy and localization of thecarriers.Electronic topological transitions (ETT) involvechanges in the topology of a metal's Fermi surface. This thesis investigates theeffect of such electronic transitions in various materials, ranging from pureelements to complex compounds.To describe the interplay between electronic transitionsand properties of real materials,different state-of-the-art computational methods are used. The densityfunctional theory(DFT), as well as the DFT + U method, is used to calculatestructural properties. The validity of recently introduced exchange-correlationfunctionals, such as the strongly constrained and appropriately normed (SCAN)functional, is also assessed for magnetic elements. In order toinclude dynamical effects of electron interactions we use the DFT + dynamical meanfield theory (DFT + DMFT) method.Experiments in hcp-Os have reported peculiarities in the ratio betweenlattice parameters at high pressure. Previous calculations have suggested these transitions maybe related to ETTs and even crossings of core levels at ultra high pressure. Inthis thesis it is shownthat the crossing of core levels is a general feature of heavy transitionmetals. Experiments have therefore been performed to look for indications ofthis transition in Ir using X-ray absorption spectroscopy. In NiO, strongrepulsion between electrons leads to a Mott insulating state at ambientconditions. It has long been predicted that high pressure will lead to aninsulator-to-metal transition. This has been suggested to be accompanied by aloss of magnetic order, and a structural phase transition. In collaboration withexperimentalists we look for thistransition by investigating the X-ray absorption spectra as well as themagnetic hyperfine field. We find no evidence of a Mott transition up to 280GPa. In the Mott insulator TiPO4, application of external pressure has beensuggested to lead to a spin-Peierls transition at room temperature. Weinvestigate the dimerisation and the magnetic structure of TiPO4 at high pressure.As pressure is increased further, TiPO4 goes through a metal to insulatortransition before an eventual crystallographic phase transition. Remarkably, thenew high pressure phases are found to be insulators; the Mott insulating stateis restored.MAX phases are layered materials that combinemetallic and ceramic properties and feature layers of M-metal and X-C or N atomsinterconnected by A-group atoms. Magnetic MAX-phases with their low dimensionalmagnetism are promising candidates for applications in e.g., spintronics.The validity of various theoretical approaches are discussed in connection tothe magnetic MAX-phase Mn2GaC. Using DFT and DFT + DMFT we consider the hightemperature paramagnetic state, and whether the magnetic moments are formed bylocalized or itinerant electrons.
|
|
| 9. |
- Salamania, Janella, 1992-, et al.
(author)
-
High-resolution STEM investigation of the role of dislocations during decomposition of Ti1-xAlxNy
- 2023
-
In: Scripta Materialia. - : Elsevier. - 1359-6462 .- 1872-8456. ; 229
-
Journal article (peer-reviewed)abstract
- The defect structures forming during high-temperature decomposition of Ti1-xAlxNy films were investigated through high-resolution scanning transmission electron microscopy. After annealing to 950 °C, misfit edge dislocations a/6〈112〉{111} partial dislocations permeate the interface between TiN-rich and AlN-rich domains to accommodate lattice misfits during spinodal decomposition. The stacking fault energy associated with the partial dislocations decreases with increasing Al content, which facilitates the coherent cubic to wurtzite structure transition of AlN-rich domains. The wurtzite AlN-rich structure is recovered when every third cubic {111} plane is shifted by along the [211] direction. After annealing to 1100 °C, a temperature where coarsening dominates the microstructure evolution, we observe intersections of stacking faults, which form sessile locks at the interface of the TiN- and AlN-rich domains. These observed defect structures facilitate the formation of semicoherent interfaces and contribute to hardening in Ti1-xAlxNy.
|
|
| 10. |
- Tidholm, Johan, 1991-
(author)
-
Lattice dynamics : From fundamental research to practical applications
- 2020
-
Doctoral thesis (other academic/artistic)abstract
- The reason to perform calculations in material science usually falls into one of two categories: to predict or explain the origin of material properties. This thesis covers first-principle calculations for solids at extreme conditions, from both of the two mentioned categories. I primarily have studied the effects of high-pressure and high-temperature on lattice dynamics, mechanical and electronic properties. To treat the effects of temperature, ab initio molecular dynamics (AIMD) simulations and self-consistent phonon calculations, based on density functional theory, have been utilised. These approaches account for the temperature effects by considering thermally excited supercells as samples of a statistical ensemble. To extract properties from this representation, I have used methods which maps the supercell data to a unit cell representation or fits it to a simple model Hamiltonian.The small displacement method was used to analyse the dynamical stability for nitrides and polymorphs of silica, synthesised at high-pressure in a diamond anvil cell. The nitride compounds consist of a high amount of nitrogen either as chains, forming a porous framework together with transition metal atoms or as dinitrogen molecules, occupying the channels of the framework. The nitrogen chains consist of single- or double-bonded nitrogen atoms, making these compounds highly energetic. Polymorphs of silica can be used to model deep Earth liquids. These new polymorphs, named coesite-IV and coesite-V, consist of four-, five-, and six-oriented silicon. Some of the octahedra of the six-oriented silicon atoms, of these new phases, are sharing faces, which according to Pauling's third rule would make them highly unstable. My phonon calculations indicate these phases to be dynamically stable. Furthermore, my calculations predict higher compressibility for these new phases compared to the competing ones. By modelling silicate melts with coesite-IV and coesite-V, a more complex and compressible structure is expected, affecting the predicted seismic behaviour.I studied Kohn anomalies for body-centered cubic niobium by simulating this material with self-consistent phonon calculations. The electronic structure was studied by using a band unfolding technique, for which I obtained an effective unit cell representation of the electronic structure at elevated temperatures. Temperature primarily smeared the electronic states but did not induce significant shifts of the bands. In parallel, the anharmonicity of this system was studied using the temperature dependent effective potential method. Even close to the melting temperature, this element is remarkably harmonic. The experimentally observed disappearance of the Kohn anomalies with increased temperature is predominantly dependent, according to my calculations, on the temperature-induced smearing of the electronic states.Using stress-strain relations, accurate high-temperature elastic properties were predicted for Ti0.5Al0.5N. The simulations were performed with AIMD. The stresses were fitted using the least-squares method to a linear expression from which the elastic constants were derived. The results were compared with previously performed calculations that employed additional approximations. The results of the symmetry imposed force constant temperature dependent effective potential (SIFC-TDEP) method agrees well with our results. I also compared my results with TiN calculations that employed a similar methodology. My and the SIFC-TDEP results are reporting lower values for the polycrystalline moduli than the calculations for TiN. The data I generated were also used for a machine learned interatomic potential method, where moment tensor potentials were trained and evaluated, using this data.
|
|
| 11. |
- Aslandukov, Andrey, et al.
(author)
-
Anionic N18 Macrocycles and a Polynitrogen Double Helix in Novel Yttrium Polynitrides YN6 and Y2N11 at 100 GPa
- 2022
-
In: Angewandte Chemie International Edition. - Weinheim, Germany : Wiley-VCH Verlagsgesellschaft. - 1433-7851 .- 1521-3773. ; 61:34
-
Journal article (peer-reviewed)abstract
- Two novel yttrium nitrides, YN6 and Y2N11, were synthesized by direct reaction between yttrium and nitrogen at 100 GPa and 3000 K in a laser-heated diamond anvil cell. High-pressure synchrotron single-crystal X-ray diffraction revealed that the crystal structures of YN6 and Y2N11 feature a unique organization of nitrogen atoms-a previously unknown anionic N-18 macrocycle and a polynitrogen double helix, respectively. Density functional theory calculations, confirming the dynamical stability of the YN6 and Y2N11 compounds, show an anion-driven metallicity, explaining the unusual bond orders in the polynitrogen units. As the charge state of the polynitrogen double helix in Y2N11 is different from that previously found in Hf2N11 and because N-18 macrocycles have never been predicted or observed, their discovery significantly extends the chemistry of polynitrides.
|
|
| 12. |
- Bruening, Lukas, et al.
(author)
-
Stabilization of Guanidinate Anions [CN3]5− in Calcite-Type SbCN3
- 2023
-
In: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 62:47
-
Journal article (peer-reviewed)abstract
- The stabilization of nitrogen-rich phases presents a significant chemical challenge due to the inherent stability of the dinitrogen molecule. This stabilization can be achieved by utilizing strong covalent bonds in complex anions with carbon, such as cyanide CN- and NCN(2- )carbodiimide, while more nitrogen-rich carbonitrides are hitherto unknown. Following a rational chemical design approach, we synthesized antimony guanidinate SbCN3 at pressures of 32-38 GPa using various synthetic routes in laser-heated diamond anvil cells. SbCN3, which is isostructural to calcite CaCO3, can be recovered under ambient conditions. Its structure contains the previously elusive guanidinate anion [CN3](5-), marking a fundamental milestone in carbonitride chemistry. The crystal structure of SbCN3 was solved and refined from synchrotron single-crystal X-ray diffraction data and was fully corroborated by theoretical calculations, which also predict that SbCN3 has a direct band gap with the value of 2.20 eV. This study opens a straightforward route to the entire new family of inorganic nitridocarbonates.
|
|
| 13. |
- Bykov, Maxim, et al.
(author)
-
High-Pressure Synthesis of a Nitrogen-Rich Inclusion Compound ReN8·xN2 with Conjugated Polymeric Nitrogen Chains
- 2018
-
In: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 57:29, s. 9048-9053
-
Journal article (peer-reviewed)abstract
- A nitrogen-rich compound, ReN(8)xN(2), was synthesized by a direct reaction between rhenium and nitrogen at high pressure and high temperature in a laser-heated diamond anvil cell. Single-crystal X-ray diffraction revealed that the crystal structure, which is based on the ReN8 framework, has rectangular-shaped channels that accommodate nitrogen molecules. Thus, despite a very high synthesis pressure, exceeding 100GPa, ReN(8)xN(2) is an inclusion compound. The amount of trapped nitrogen (x) depends on the synthesis conditions. The polydiazenediyl chains [-N=N-] that constitute the framework have not been previously observed in any compound. Abinitio calculations on ReN(8)xN(2) provide strong support for the experimental results and conclusions.
|
|
| 14. |
- Bykova, Elena, et al.
(author)
-
Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B-2 Dumbbells
- 2022
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 34:18, s. 8138-8152
-
Journal article (peer-reviewed)abstract
- Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB3) and rhenium tetraboride (ReB4) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link short bonded (similar to 1.7 angstrom) axially oriented B-2 dumbbells. The short and incompressible Re-B and B-B bonds oriented along the hexagonal c-axis contribute to low axial compressibility comparable with the linear compressibility of diamond. Sub-millimeter samples of ReB3 and ReB4 were synthesized in a large-volume press at pressures as low as 33 GPa and used for material characterization. Crystals of both compounds are metallic and hard (Vickers hardness, H-V = 34(3) GPa). Geometrical, crystal-chemical, and theoretical analysis considerations suggest that potential ReBx compounds with x > 4 can be based on the same principle of structural organization as in ReB3 and ReB4 and possess similar mechanical and electronic properties.
|
|
| 15. |
- Davidsson, Joel, 1989-, et al.
(author)
-
ADAQ : Automatic workflows for magneto-optical properties of point defects in semiconductors
- 2021
-
In: Computer Physics Communications. - : Elsevier. - 0010-4655 .- 1879-2944. ; 269
-
Journal article (peer-reviewed)abstract
- Automatic Defect Analysis and Qualification (ADAQ) is a collection of automatic workflows developed for high-throughput simulations of magneto-optical properties of point defects in semiconductors. These workflows handle the vast number of defects by automating the processes to relax the unit cell of the host material, construct supercells, create point defect clusters, and execute calculations in both the electronic ground and excited states. The main outputs are the magneto-optical properties which include zero-phonon lines, zero-field splitting, and hyperfine coupling parameters. In addition, the formation energies are calculated. We demonstrate the capability of ADAQ by performing a complete characterization of the silicon vacancy in silicon carbide in the polytype 4H (4H-SiC).
|
|
| 16. |
- Davidsson, Joel, 1989-, et al.
(author)
-
Exhaustive characterization of modified Si vacancies in 4H-SiC
- 2022
-
In: Nanophotonics. - : Walter de Gruyter. - 2192-8606 .- 2192-8614. ; 11:20, s. 4565-4580
-
Journal article (peer-reviewed)abstract
- The negatively charged silicon vacancy (V-Si(-)) in silicon carbide is a well-studied point defect for quantum applications. At the same time, a closer inspection of ensemble photoluminescence and electron paramagnetic resonance measurements reveals an abundance of related but so far unidentified signals. In this study, we search for defects in 4H-SiC that explain the above magneto-optical signals in a defect database generated by automatic defect analysis and qualification (ADAQ) workflows. This search reveals only one class of atomic structures that exhibit silicon-vacancy-like properties in the data: a carbon anti-site (C-Si) within sub-nanometer distances from the silicon vacancy only slightly alters the latter without affecting the charge or spin state. Such a perturbation is energetically bound. We consider the formation of V-Si(-) + C-Si; up to 2 nm distance and report their zero phonon lines and zero field splitting values. In addition, we perform high-resolution photoluminescence experiments in the silicon vacancy region and find an abundance of lines. Comparing our computational and experimental results, several configurations show great agreement. Our work demonstrates the effectiveness of a database with high-throughput results in the search for defects in quantum applications.
|
|
| 17. |
- Knoop, Florian, et al.
(author)
-
TDEP:Temperature Dependent Effective Potentials
- 2024
-
In: Journal of Open Source Software. - : Open journals. - 2475-9066. ; 9:94
-
Journal article (peer-reviewed)abstract
- The Temperature Dependent Effective Potential (TDEP) method is a versatile and efficient approach to include temperature in a binitio materials simulations based on phonon theory. TDEP can be used to describe thermodynamic properties in classical and quantum ensembles, and several response properties ranging from thermal transport to Neutron and Raman spectroscopy. A stable and fast reference implementation is given in the software package of the same name described here. The underlying theoretical framework and foundation is briefly sketched with an emphasis on discerning the conceptual difference between bare and effective phonon theory, in both self-consistent and non-self-consistent formulations. References to numerous applications and more in-depth discussions of the theory are given.
|
|
| 18. |
- Laniel, Dominique, et al.
(author)
-
Front Cover: Revealing Phosphorus Nitrides up to the Megabar Regime: Synthesis of α′-P3N5, δ-P3N5 and PN2 (Chem. Eur. J. 62/2022)
- 2022
-
In: Chemistry - A European Journal. - : Wiley-VCH Verlagsgesellschaft. - 0947-6539 .- 1521-3765. ; 28:62
-
Journal article (other academic/artistic)abstract
- For the last 30 years, the lack of a binary phosphorus nitride containing PN6 octahedra formed a scientific chasm between carbon-group and oxygen-group nitrides, both featuring a variety of solids with XN6 units (X being a non-metal element). Now, the discovery of the δ-P3N5 and PN2 phosphorus nitrides—formed under high pressure and both composed of the elusive PN6 octahedron—builds a long-sought-after bridge between these two groups of nitrides. More information can be found in the Research Article by D. Laniel, F. Trybel, and co-workers (DOI: 10.1002/chem.202201998).
|
|
| 19. |
- Laniel, Dominique, et al.
(author)
-
Revealing Phosphorus Nitrides up to the Megabar Regime: Synthesis of α′‐P3N5, δ‐P3N5 and PN2
- 2022
-
In: Chemistry - A European Journal. - : WILEY-V C H VERLAG GMBH. - 0947-6539 .- 1521-3765. ; 28:62
-
Journal article (peer-reviewed)abstract
- Non-metal nitrides are an exciting field of chemistry, featuring a significant number of compounds that can possess outstanding material properties. These properties mainly rely on maximizing the number of strong covalent bonds, with crosslinked XN6 octahedra frameworks being particularly attractive. In this study, the phosphorus-nitrogen system was studied up to 137 GPa in laser-heated diamond anvil cells, and three previously unobserved phases were synthesized and characterized by single-crystal X-ray diffraction, Raman spectroscopy measurements and density functional theory calculations. delta-P3N5 and PN2 were found to form at 72 and 134 GPa, respectively, and both feature dense 3D networks of the so far elusive PN6 units. The two compounds are ultra-incompressible, having a bulk modulus of K-0=322 GPa for delta-P3N5 and 339 GPa for PN2. Upon decompression below 7 GPa, delta-P3N5 undergoes a transformation into a novel alpha -P3N5 solid, stable at ambient conditions, that has a unique structure type based on PN4 tetrahedra. The formation of alpha -P3N5 underlines that a phase space otherwise inaccessible can be explored through materials formed under high pressure.
|
|
| 20. |
|
|
| 21. |
- Laniel, Dominique, et al.
(author)
-
Synthesis of Ultra‐Incompressible and Recoverable Carbon Nitrides Featuring CN4 Tetrahedra
- 2024
-
In: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 36:3
-
Journal article (peer-reviewed)abstract
- Carbon nitrides featuring three-dimensional frameworks of CN4 tetrahedra are one of the great aspirations of materials science, expected to have a hardness greater than or comparable to diamond. After more than three decades of efforts to synthesize them, no unambiguous evidence of their existence has been delivered. Here, the high-pressure high-temperature synthesis of three carbon-nitrogen compounds, tI14-C3N4, hP126-C3N4, and tI24-CN2, in laser-heated diamond anvil cells, is reported. Their structures are solved and refined using synchrotron single-crystal X-ray diffraction. Physical properties investigations show that these strongly covalently bonded materials, ultra-incompressible and superhard, also possess high energy density, piezoelectric, and photoluminescence properties. The novel carbon nitrides are unique among high-pressure materials, as being produced above 100 GPa they are recoverable in air at ambient conditions.
|
|
