| 1. |
|
|
| 2. |
- Tabiri, S, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
| 3. |
- Bravo, L, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
| 4. |
|
|
| 5. |
- Abbafati, Cristiana, et al.
(author)
-
- 2020
-
Journal article (peer-reviewed)
|
|
| 6. |
- Lozano, Rafael, et al.
(author)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Journal article (peer-reviewed)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 7. |
- Murray, Christopher J. L., et al.
(author)
-
Population and fertility by age and sex for 195 countries and territories, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1995-2051
-
Journal article (peer-reviewed)abstract
- Background: Population estimates underpin demographic and epidemiological research and are used to track progress on numerous international indicators of health and development. To date, internationally available estimates of population and fertility, although useful, have not been produced with transparent and replicable methods and do not use standardised estimates of mortality. We present single-calendar year and single-year of age estimates of fertility and population by sex with standardised and replicable methods. Methods: We estimated population in 195 locations by single year of age and single calendar year from 1950 to 2017 with standardised and replicable methods. We based the estimates on the demographic balancing equation, with inputs of fertility, mortality, population, and migration data. Fertility data came from 7817 location-years of vital registration data, 429 surveys reporting complete birth histories, and 977 surveys and censuses reporting summary birth histories. We estimated age-specific fertility rates (ASFRs; the annual number of livebirths to women of a specified age group per 1000 women in that age group) by use of spatiotemporal Gaussian process regression and used the ASFRs to estimate total fertility rates (TFRs; the average number of children a woman would bear if she survived through the end of the reproductive age span [age 10–54 years] and experienced at each age a particular set of ASFRs observed in the year of interest). Because of sparse data, fertility at ages 10–14 years and 50–54 years was estimated from data on fertility in women aged 15–19 years and 45–49 years, through use of linear regression. Age-specific mortality data came from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 estimates. Data on population came from 1257 censuses and 761 population registry location-years and were adjusted for underenumeration and age misreporting with standard demographic methods. Migration was estimated with the GBD Bayesian demographic balancing model, after incorporating information about refugee migration into the model prior. Final population estimates used the cohort-component method of population projection, with inputs of fertility, mortality, and migration data. Population uncertainty was estimated by use of out-of-sample predictive validity testing. With these data, we estimated the trends in population by age and sex and in fertility by age between 1950 and 2017 in 195 countries and territories. Findings: From 1950 to 2017, TFRs decreased by 49·4% (95% uncertainty interval [UI] 46·4–52·0). The TFR decreased from 4·7 livebirths (4·5–4·9) to 2·4 livebirths (2·2–2·5), and the ASFR of mothers aged 10–19 years decreased from 37 livebirths (34–40) to 22 livebirths (19–24) per 1000 women. Despite reductions in the TFR, the global population has been increasing by an average of 83·8 million people per year since 1985. The global population increased by 197·2% (193·3–200·8) since 1950, from 2·6 billion (2·5–2·6) to 7·6 billion (7·4–7·9) people in 2017; much of this increase was in the proportion of the global population in south Asia and sub-Saharan Africa. The global annual rate of population growth increased between 1950 and 1964, when it peaked at 2·0%; this rate then remained nearly constant until 1970 and then decreased to 1·1% in 2017. Population growth rates in the southeast Asia, east Asia, and Oceania GBD super-region decreased from 2·5% in 1963 to 0·7% in 2017, whereas in sub-Saharan Africa, population growth rates were almost at the highest reported levels ever in 2017, when they were at 2·7%. The global average age increased from 26·6 years in 1950 to 32·1 years in 2017, and the proportion of the population that is of working age (age 15–64 years) increased from 59·9% to 65·3%. At the national level, the TFR decreased in all countries and territories between 1950 and 2017; in 2017, TFRs ranged from a low of 1·0 livebirths (95% UI 0·9–1·2) in Cyprus to a high of 7·1 livebirths (6·8–7·4) in Niger. The TFR under age 25 years (TFU25; number of livebirths expected by age 25 years for a hypothetical woman who survived the age group and was exposed to current ASFRs) in 2017 ranged from 0·08 livebirths (0·07–0·09) in South Korea to 2·4 livebirths (2·2–2·6) in Niger, and the TFR over age 30 years (TFO30; number of livebirths expected for a hypothetical woman ageing from 30 to 54 years who survived the age group and was exposed to current ASFRs) ranged from a low of 0·3 livebirths (0·3–0·4) in Puerto Rico to a high of 3·1 livebirths (3·0–3·2) in Niger. TFO30 was higher than TFU25 in 145 countries and territories in 2017. 33 countries had a negative population growth rate from 2010 to 2017, most of which were located in central, eastern, and western Europe, whereas population growth rates of more than 2·0% were seen in 33 of 46 countries in sub-Saharan Africa. In 2017, less than 65% of the national population was of working age in 12 of 34 high-income countries, and less than 50% of the national population was of working age in Mali, Chad, and Niger. Interpretation: Population trends create demographic dividends and headwinds (ie, economic benefits and detriments) that affect national economies and determine national planning needs. Although TFRs are decreasing, the global population continues to grow as mortality declines, with diverse patterns at the national level and across age groups. To our knowledge, this is the first study to provide transparent and replicable estimates of population and fertility, which can be used to inform decision making and to monitor progress. Funding: Bill & Melinda Gates Foundation.
|
|
| 8. |
- Stanaway, Jeffrey D., et al.
(author)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990-2017: A systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1923-1994
-
Journal article (peer-reviewed)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk-outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk-outcome pairs, and new data on risk exposure levels and risk- outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017.
|
|
| 9. |
- Yousaf, M., et al.
(author)
-
Evaluation of rare earth (Yb, La) doped (Sm3Fe5O12) garnet ferrite membrane for LT-SOFC
- 2020
-
In: International journal of hydrogen energy. - : Elsevier Ltd. - 0360-3199 .- 1879-3487.
-
Journal article (peer-reviewed)abstract
- Rare earth element doping is a popular methodology for improving the electrical and electrochemical properties of materials. Inspired by this ideology, garnet ferrite material Sm3Fe5O12 (SFO) doped by rare earth (Yb, La) metal ions to form Sm3-0.5Yb0.5Fe5O12 (SYFO) and Sm3-0.5La0·5Fe5O12 (SLFO). The samples are synthesized by sol gel auto combustion and have been applied as electrolyte membrane for the first time in low temperature solid oxide fuel cell (LT-SOFC). The results indicate that the as-prepared materials have triple charge transport (H+/O−2/e−) carrier which promotes the hydrogen oxidation reaction (HOR) and oxygen reduction reactions (ORR) in SOFC at triple phase boundary region (TPB). Electrochemical impedance spectroscopy (EIS) reveals that the polarization resistance of SLFO membrane significantly reduces from 0.92 Ω-cm2 to 0.45 Ω-cm2 and the power output improve from 310 mW/cm2 to 650 mW/cm2 at 550 °C temperature in comparison with that of SYFO and SFO electrolyte supported cells. UV-vis diffused spectroscopy explains the semiconducting nature of the prepared materials due to the existence of optical bandgap in the semiconductor region. The further investigation also verifies the protonic conduction of SLFO membrane by constructing oxygen ion blocking fuel cell with configuration of Ni-NCAL/BZCY/SLFO/BZCY/Ni-NCAL having 427.94 mW/Cm2 fuel cell performance with 1.03 OCV at 550 °C temperature.
|
|
| 10. |
- Ramirez, M. I., et al.
(author)
-
Technical challenges of working with extracellular vesicles
- 2018
-
In: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 10:3, s. 881-906
-
Journal article (peer-reviewed)abstract
- Extracellular Vesicles (EVs) are gaining interest as central players in liquid biopsies, with potential applications in diagnosis, prognosis and therapeutic guidance in most pathological conditions. These nanosized particles transmit signals determined by their protein, lipid, nucleic acid and sugar content, and the unique molecular pattern of EVs dictates the type of signal to be transmitted to recipient cells. However, their small sizes and the limited quantities that can usually be obtained from patient-derived samples pose a number of challenges to their isolation, study and characterization. These challenges and some possible options to overcome them are discussed in this review. © 2018 The Royal Society of Chemistry.
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
- Hussain, Fida, et al.
(author)
-
Comparative electrochemical investigation of zinc based nano-composite anode materials for solid oxide fuel cell
- 2019
-
In: Ceramics International. - : Elsevier. - 0272-8842 .- 1873-3956. ; 45:1, s. 1077-1083
-
Journal article (peer-reviewed)abstract
- The structural and electrochemical properties of zinc based nano-composites anode materials with a composition of X0.25Ti0.5Zn0.70 (where X = Cu, Mn, Ag) have been investigated in this present study. The proposed Xo.zsTiousZno.70 oxide materials have been synthesized through sol-gel method. The doping effect of Cu, Mn, and Ag on TiZn oxides were analyzed in terms of electronic conduction and power density in hydrogen atmosphere at comparatively low temperature in the range of 650 degrees C. The crystal structure and surface morphology were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis techniques. The XRD patterns of composites depict that the average crystalline sizes lie in the range of 20-100 nm. Four -probe DC conductivity technique was used to measure the conductivity of the materials and maximum electrical conductivity of Ag0.25Ti0.05Zn0.70 oxide was found to be 7.81 S/cm at 650 degrees C. The band gap and absorption spectra were determined by ultra-violet visible (UV-Vis) and Fourier Transform Infrared spectroscopy (FTIR) techniques respectively. The maximum power density was achieved to be 354 mW/cm(2) at 650 degrees C by Ag0.25Ti0.05Zn0.70 oxide anode with SDC (electrolyte) and BSCF (conventional cathode) materials.
|
|
| 16. |
- Mehrpouyan, Hani, 1981, et al.
(author)
-
Improving Bandwidth Efficiency in E-band Communication Systems
- 2014
-
In: IEEE Communications Magazine. - 0163-6804 .- 1558-1896. ; 52:3, s. 121-128
-
Journal article (peer-reviewed)abstract
- The allocation of a large amount of bandwidth by regulating bodies in the 70/80 GHz band, i.e., the E-band, has opened up new potentials and challenges for providing affordable and reliable Gigabit per second wireless point-to-point links. This article first reviews the available bandwidth and licensing regulations in the E-band. Subsequently, different propagation models, e.g., the ITU-R and Cane models, are compared against measurement results and it is concluded that to meet specific availability requirements, E-band wireless systems may need to be designed with larger fade margins compared to microwave systems. A similar comparison is carried out between measurements and models for oscillator phase noise. It is confirmed that phase noise characteristics, that are neglected by the models used for narrowband systems, need to be taken into account for the wideband systems deployed in the E-band. Next, a new multi-input multi-output (MIMO) transceiver design, termed continuous aperture phased (CAP)-MIMO, is presented. Simulations show that CAP-MIMO enables E-band systems to achieve fiber-optic like throughputs. Finally, it is argued that full-duplex relaying can be used to greatly enhance the coverage of E-band systems without sacrificing throughput, thus, facilitating their application in establishing the backhaul of heterogeneous networks.
|
|
| 17. |
- Sansoni, P, et al.
(author)
-
New advances in CMV and immunosenescence
- 2014
-
In: Experimental gerontology. - : Elsevier BV. - 1873-6815 .- 0531-5565. ; 55, s. 54-62
-
Journal article (other academic/artistic)
|
|
| 18. |
|
|
| 19. |
- Zahra, M., et al.
(author)
-
Tailoring the ions and bandgaps in a novel semi-ionic energy conversion device for electrochemical performance
- 2020
-
In: Materials Today Energy. - : Elsevier BV. - 2468-6069. ; 18
-
Journal article (peer-reviewed)abstract
- The new semi-ionic energy conversion (SIEC) device has attracted remarkable attention owing to its clean and environmentally friendly applications. In this device, novel materials and mechanisms have been explored using electronic and ionic conductor materials. The tuning effect of the ions and bandgap has been studied to investigate the structural, optical, and electrochemical performance of the material. Composite materials, gadolinium-doped ceria-cadmium-doped ZnO (GDC-ZnCdO), based on ionic gadolinium-doped ceria (GDC) and semiconductor (ZnCdO) in molar ratios of 1:4, 2:3, 3:2, and 4:1 have been prepared by a wet chemical route. The crystalline structure of the GDC-ZnCdO was studied and found to have cubic and hexagonal wurtzite phases with an average crystallite size of 30–40 nm. The morphology of the prepared composite materials is a homogenous and porous structure. It was found that the addition of GDC increases the transmittance and shows a red shift in the bandgap from 2.70 eV to 2.46 eV. The maximum conductivity of 2.0 S/cm1 was achieved for the sample 4GDC-1ZnCdO at 700°C. Electrochemical impedance spectra and X-ray photoelectron spectroscopy analysis were performed to investigate the electrochemical properties of the prepared semi-ionic composite materials. The SIEC device showed a much better performance than a conventional solid oxide fuel cell. The maximum open-circuit voltage (OCV) of about 1.013 Vand power density of 0.65 W/cm2 were obtained using hydrogen fuel at 600°C, as compared with a conventional fuel cell with 0.72 V and 0.27 W/cm2, respectively. Hence, the results reveal that the ions and bandgap tuning play a crucial role in fuel cell functions. Therefore, it has been determined that the bandgap can be tuned to obtain a better and more stable performance of the SIEC device. This study presents a novel approach to enhance the electrochemical performance with the tailoring of the new semi-ionic materials.
|
|
| 20. |
|
|
| 21. |
- Akbar, F., et al.
(author)
-
Graphene synthesis, characterization and its applications in nanophotonics, nanoelectronics, and nanosensing
- 2015
-
In: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 26:7, s. 4347-4379
-
Journal article (peer-reviewed)abstract
- In the last decade, as semiconductor industry was approaching the end of the exponential Moore's roadmap for device downscaling, the necessity of finding new candidate materials has forced many research groups to explore many different types of non-conventional materials. Among them, graphene, CNTs and organic conductors are the most successful alternatives. Finding a material with metallic properties combined with field effect characteristics on nanoscale level has been always a dream to continue the ever-shrinking road of the nanoelectronics. Due to its fantastic features such as high mobility, optical transparency, room temperature quantum Hall effect, mechanical stiffness, etc. the atomically thin carbon layer, graphene, has attracted the industry's attention not only in the micro-, nano-, and opto-electronics but also in biotechnology. This paper reviews the basics and previous works on graphene technology and its developments. Compatibility of this material with Si processing technology is its crucial characteristic for mass production. This study also reviews the physical and electrical properties of graphene as a building block for other carbon allotropes. Different growth methods and a wide range of graphene's applications will be discussed and compared. A brief comparison on the performance result of different types of devices has also been presented. Until now, the main focus of research has been on the background physics and its application in electronic devices. But, according to the recent works on its applications in photonics and optoelectronics, where it benefits from the combination of its unique optical and electronic properties, even without a bandgap, this material enables ultrawide-band tunability. Here in this article we review different applications and graphene's advantages and drawbacks will be mentioned to conclude at the end.
|
|
| 22. |
- Akbar, M., et al.
(author)
-
Demonstrating the dual functionalities of CeO2–CuO composites in solid oxide fuel cells
- 2021
-
In: International journal of hydrogen energy. - : Elsevier Ltd. - 0360-3199 .- 1879-3487. ; 46:15, s. 9938-9947
-
Journal article (peer-reviewed)abstract
- Nowadays, lowering the operating temperature of solid oxide fuel cells (SOFCs) is a major challenge towards their widespread application. This has triggered extensive material studies involving the research for new electrolytes and electrodes. Among these works, it has been shown that CeO2 is not only a promising basis of solid oxide electrolytes, but also capable of serving as a catalytic assistant in anode. In the present work, to develop new electrolytes and electrodes for SOFCs based on these features of CeO2, a new type of functional composite is developed by introducing semiconductor CuO into CeO2. The prepared composites with mole ratios of 7:3 (7CeO2–3CuO) and 3:7 (3CeO2–7CuO) are assessed as electrolyte and anode in fuel cells, respectively. The cell based on 7CeO2–3CuO electrolyte reaches a power outputs of 845 mW cm−2 at 550 °C, superior to that of pure CeO2 electrolyte fuel cell, while an Ce0.8Sm0.2O2-δ electrolyte SOFC with 3CeO2–7CuO anode achieves high power density along with open circuit voltage of 1.05 V at 550 °C. In terms of polarization curve and AC impedance analysis, our investigation manifests the developed 7CeO2–3CuO composite has good electrolyte capability with a hybrid H+/O2− conductivity of 0.1–0.137 S cm−1 at 500–550 °C, while the 3CeO2–7CuO composite plays a competent anode role with considerable catalytic activity, indicative of the dual-functionalities of CeO2–CuO in fuel cell. Furthermore, a bulk heterojunction effect based on CeO2/CuO pn junction is proposed to interpret the suppressed electrons in 7CeO2–3CuO electrolyte. Our study thus reveals the great potential of CeO2–CuO to develop functional materials for SOFCs to enable low-temperature operation.
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
- Ali, Akbar, et al.
(author)
-
Silver-chitosan nanobiocomposite as urea biosensor
- 2014
-
In: Optoelectronics and Advanced Materials Rapid Communications. - : NATL INST OPTOELECTRONICS. - 1842-6573 .- 2065-3824. ; 8:11-12, s. 1238-1242
-
Journal article (peer-reviewed)abstract
- Silver nanoparticles (Ag NPs) were synthesized by aqueous chemical growth technique. The above mentioned synthesized materials were characterized by applying scanning electron microscope (SEM) and X-ray diffraction for confirmation of morphological analysis, compositional purity, and crystalline property and emission characteristics as well. In order to fabricate the urea biosensor (potentiometric), a solution of deionized water and chitosan was prepared having Ag NPs. The said solution was dropped on the glass fiber filter having diameter of 2 cm. A wire of copper having thickness of approximately 500 pm was used for the voltage signal to pull out from the said working nanoparticles (NPs). To improve the strength, sensitivity and the quality of the potentiometric urea biosensor, a specific functional surface of Ag NPs was attained by electrostatic restrained of an enzyme (urease) onto the chitosan-Ag (a nanobiocomposite). The potentiometric reaction was measured via electrochemical detection technique. The potentiometric urea biosensor illustrates significant sensibility at room temperature with approximate to 42 mV as per span. Furthermore, the said biosensor showed an appropriate stable response within 7 sec.
|
|
