1. |
- Aad, G., et al.
(author)
-
- 2012
-
Journal article (peer-reviewed)
|
|
2. |
- Aad, G., et al.
(author)
-
- 2011
-
Journal article (peer-reviewed)
|
|
3. |
|
|
4. |
- Aad, G., et al.
(author)
-
Readiness of the ATLAS Tile Calorimeter for LHC collisions
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:4, s. 1193-1236
-
Journal article (peer-reviewed)abstract
- The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully operational since 2007 and the detector has successfully collected data from the LHC single beams in 2008 and first collisions in 2009. This paper gives an overview of the Tile Calorimeter performance as measured using random triggers, calibration data, data from cosmic ray muons and single beam data. The detector operation status, noise characteristics and performance of the calibration systems are presented, as well as the validation of the timing and energy calibration carried out with minimum ionising cosmic ray muons data. The calibration systems' precision is well below the design value of 1%. The determination of the global energy scale was performed with an uncertainty of 4%.
|
|
5. |
- Aad, G., et al.
(author)
-
The ATLAS Inner Detector commissioning and calibration
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 787-821
-
Journal article (peer-reviewed)abstract
- The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took part in data-taking with single LHC beams and cosmic rays. The initial detector operation, hardware commissioning and in-situ calibrations are described. Tracking performance has been measured with 7.6 million cosmic-ray events, collected using a tracking trigger and reconstructed with modular pattern-recognition and fitting software. The intrinsic hit efficiency and tracking trigger efficiencies are close to 100%. Lorentz angle measurements for both electrons and holes, specific energy-loss calibration and transition radiation turn-on measurements have been performed. Different alignment techniques have been used to reconstruct the detector geometry. After the initial alignment, a transverse impact parameter resolution of 22.1 +/- 0.9 mu m and a relative momentum resolution sigma (p) /p=(4.83 +/- 0.16)x10(-4) GeV(-1)xp (T) have been measured for high momentum tracks.
|
|
6. |
- Aad, G., et al.
(author)
-
The ATLAS Simulation Infrastructure
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 823-874
-
Journal article (peer-reviewed)abstract
- The simulation software for the ATLAS Experiment at the Large Hadron Collider is being used for large-scale production of events on the LHC Computing Grid. This simulation requires many components, from the generators that simulate particle collisions, through packages simulating the response of the various detectors and triggers. All of these components come together under the ATLAS simulation infrastructure. In this paper, that infrastructure is discussed, including that supporting the detector description, interfacing the event generation, and combining the GEANT4 simulation of the response of the individual detectors. Also described are the tools allowing the software validation, performance testing, and the validation of the simulated output against known physics processes.
|
|
7. |
- Aad, G., et al.
(author)
-
Studies of the performance of the ATLAS detector using cosmic-ray muons
- 2011
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 71:3
-
Journal article (peer-reviewed)abstract
- Muons from cosmic-ray interactions in the atmosphere provide a high-statistics source of particles that can be used to study the performance and calibration of the ATLAS detector. Cosmic-ray muons can penetrate to the cavern and deposit energy in all detector subsystems. Such events have played an important role in the commissioning of the detector since the start of the installation phase in 2005 and were particularly important for understanding the detector performance in the time prior to the arrival of the first LHC beams. Global cosmic-ray runs were undertaken in both 2008 and 2009 and these data have been used through to the early phases of collision data-taking as a tool for calibration, alignment and detector monitoring. These large datasets have also been used for detector performance studies, including investigations that rely on the combined performance of different subsystems. This paper presents the results of performance studies related to combined tracking, lepton identification and the reconstruction of jets and missing transverse energy. Results are compared to expectations based on a cosmic-ray event generator and a full simulation of the detector response.
|
|
8. |
- Tabiri, S, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
9. |
- Bravo, L, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
10. |
- Glasbey, JC, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
11. |
|
|
12. |
- Aad, G., et al.
(author)
-
Commissioning of the ATLAS Muon Spectrometer with cosmic rays
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 875-916
-
Journal article (peer-reviewed)abstract
- The ATLAS detector at the Large Hadron Collider has collected several hundred million cosmic ray events during 2008 and 2009. These data were used to commission the Muon Spectrometer and to study the performance of the trigger and tracking chambers, their alignment, the detector control system, the data acquisition and the analysis programs. We present the performance in the relevant parameters that determine the quality of the muon measurement. We discuss the single element efficiency, resolution and noise rates, the calibration method of the detector response and of the alignment system, the track reconstruction efficiency and the momentum measurement. The results show that the detector is close to the design performance and that the Muon Spectrometer is ready to detect muons produced in high energy proton-proton collisions.
|
|
13. |
|
|
14. |
|
|
15. |
|
|
16. |
|
|
17. |
|
|
18. |
|
|
19. |
|
|
20. |
|
|
21. |
- Marconi, A., et al.
(author)
-
ANDES, the high resolution spectrograph for the ELT : science case, baseline design and path to construction
- 2022
-
In: GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY IX. - : SPIE - International Society for Optical Engineering. - 9781510653504 - 9781510653498
-
Conference paper (peer-reviewed)abstract
- The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs (UBV, RIZ, YJH) providing a spectral resolution of similar to 100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 mu m with the goal of extending it to 0.35-2.4 mu m with the addition of a K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Its modularity will ensure that ANDES can be placed entirely on the ELT Nasmyth platform, if enough mass and volume is available, or partly in the Coude room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of more than 200 scientists and engineers which represent the majority of the scientific and technical expertise in the field among ESO member states.
|
|
22. |
|
|
23. |
- Aguiar, A., et al.
(author)
-
Practices in prescribing protein substitutes for PKU in Europe : No uniformity of approach
- 2015
-
In: Molecular Genetics and Metabolism. - : Elsevier BV. - 1096-7192 .- 1096-7206. ; 115:1, s. 17-22
-
Journal article (peer-reviewed)abstract
- Background: There appears little consensus concerning protein requirements in phenylketonuria (PKU). Methods: A questionnaire completed by 63 European and Turkish IMD centres from 18 countries collected data on prescribed total protein intake (natural/intact protein and phenylalanine-free protein substitute [PS]) by age, administration frequency and method, monitoring, and type of protein substitute. Data were analysed by European region using descriptive statistics. Results: The amount of total protein (from PS and natural/intact protein) varied according to the European region. Higher median amounts of total protein were prescribed in infants and children in Northern Europe (n = 24 centres) (infants <1 year, >2-3 g/kg/day; 1-3 years of age, >2-3 g/kg/day; 4-10 years of age, >1.5-2.5 g/kg/day) and Southern Europe (n = 10 centres) (infants <1 year, 2.5 g/kg/day, 1-3 years of age, 2 g/kg/day; 4-10 years of age, 1.5-2 g/kg/day), than by Eastern Europe (n = 4 centres) (infants <1 year, 2.5 g/kg/day, 1-3 years of age, >2-2.5 g/kg/day; 4-10 years of age, >1.5-2 g/kg/day) and with Western Europe (n = 25 centres) giving the least (infants <1 year, >2-2.5 g/kg/day, 1-3 years of age, 1.5-2 g/kg/day; 4-10 years of age, 1-1.5 g/kg/day). Total protein prescription was similar in patients aged >10 years (1-1.5 g/kg/day) and maternal patients (1-1.5 g/kg/day). Conclusions: The amounts of total protein prescribed varied between European countries and appeared to be influenced by geographical region. In PKU, all gave higher than the recommended 2007 WHO/FAO/UNU safe levels of protein intake for the general population.
|
|
24. |
- Barbosa, E.A., et al.
(author)
-
Quality improvement and geographical indication of cachaça (Brazilian spirit) by using locally selected yeast strains
- 2016
-
In: Journal of Applied Microbiology. - : Oxford University Press (OUP). - 1365-2672 .- 1364-5072. ; 121:4, s. 1038-1051
-
Journal article (peer-reviewed)abstract
- Aims In order to improve the quality and to create a biological basis for obtainment of the protected denomination of origin (PDO), indigenous yeast were isolated and characterized for use in Salinas city (the Brazilian region of quality cachaça production). Material and methods Seven thousand and two hundred yeast colonies from 15 Salinas city distilleries were screened based on their fermentative behaviour and the physicochemical composition of cachaça. Molecular polymorphic analyses were performed to characterize these isolates. Results Two Saccharomyces cerevisiae strains (nos. 678 and 680) showed appropriate characteristics to use in the cachaça production: low levels of acetaldehyde and methanol, and high ethyl lactate/ethyl acetate ratio respectively. They also presented polymorphic characteristics more closely related between themselves even when compared to other strains from Salinas. Conclusions The application of selected yeast to cachaça production can contribute for the improvement of the quality product as well as be used as a natural marker for PDO. Significance and Impact of the Study This study suggests that the use of selected yeast strains could contribute to obtain a cachaça similar to those produced traditionally, while getting wide acceptation in the market, yet presenting more homogeneous organoleptic characteristics, and thus contributing to the PDO implementation.
|
|
25. |
|
|