1. |
|
|
2. |
- Blomberg, Sara, et al.
(author)
-
2D and 3D imaging of the gas phase close to an operating model catalyst by planar laser induced fluorescence
- 2016
-
In: Journal of Physics: Condensed Matter. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 28:45
-
Research review (peer-reviewed)abstract
- In recent years, efforts have been made in catalysis related surface science studies to explore the possibilities to perform experiments at conditions closer to those of a technical catalyst, in particular at increased pressures. Techniques such as high pressure scanning tunneling/atomic force microscopy (HPSTM/AFM), near ambient pressure x-ray photoemission spectroscopy (NAPXPS), surface x-ray diffraction (SXRD) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS) at semi-realistic conditions have been used to study the surface structure of model catalysts under reaction conditions, combined with simultaneous mass spectrometry (MS). These studies have provided an increased understanding of the surface dynamics and the structure of the active phase of surfaces and nano particles as a reaction occurs, providing novel information on the structure/activity relationship. However, the surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface. Therefore, the catalytic activity of the sample itself will act as a gas-source or gas-sink, and will affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, we have applied planar laser induced fluorescence (PLIF) to the gas phase in the vicinity of an active model catalysts. Our measurements demonstrate that the gas composition differs significantly close to the catalyst and at the position of the MS, which indeed should have a profound effect on the surface structure. However, PLIF applied to catalytic reactions presents several beneficial properties in addition to investigate the effect of the catalyst on the effective gas composition close to the model catalyst. The high spatial and temporal resolution of PLIF provides a unique tool to visualize the on-set of catalytic reactions and to compare different model catalysts in the same reactive environment. The technique can be applied to a large number of molecules thanks to the technical development of lasers and detectors over the last decades, and is a complementary and visual alternative to traditional MS to be used in environments difficult to asses with MS. In this article we will review general considerations when performing PLIF experiments, our experimental set-up for PLIF and discuss relevant examples of PLIF applied to catalysis.
|
|
3. |
|
|
4. |
- Blomberg, Sara, et al.
(author)
-
Combining synchrotron light with laser technology in catalysis research
- 2018
-
In: Journal of Synchrotron Radiation. - 1600-5775 .- 0909-0495. ; 25:5, s. 1389-1394
-
Journal article (peer-reviewed)abstract
- High-energy surface X-ray diffraction (HESXRD) provides surface structural information with high temporal resolution, facilitating the understanding of the surface dynamics and structure of the active phase of catalytic surfaces. The surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface, and the catalytic activity of the sample itself may affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, planar laser-induced fluorescence (PLIF) and HESXRD have been combined during the oxidation of CO over a Pd(100) crystal. PLIF complements the structural studies with an instantaneous two-dimensional image of the CO2 gas phase in the vicinity of the active model catalyst. Here the combined HESXRD and PLIF operandomeasurements of CO oxidation over Pd(100) are presented, allowing for an improved assignment of the correlation between sample structure and the CO2distribution above the sample surface with sub-second time resolution.
|
|
5. |
|
|
6. |
- Blomberg, Sara, et al.
(author)
-
Real-Time Gas-Phase Imaging over a Pd(110) Catalyst during CO Oxidation by Means of Planar Laser-Induced Fluorescence.
- 2015
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 5:4, s. 2028-2034
-
Journal article (peer-reviewed)abstract
- The gas composition surrounding a catalytic sample has direct impact on its surface structure, which is essential when in situ investigations of model catalysts are performed. Herein a study of the gas phase close to a Pd(110) surface during CO oxidation under semirealistic conditions is presented. Images of the gas phase, provided by planar laser-induced fluorescence, clearly visualize the formation of a boundary layer with a significantly lower CO partial pressure close to the catalytically active surface, in comparison to the overall concentration as detected by mass spectrometry. The CO partial pressure variation within the boundary layer will have a profound effect on the catalysts' surface structure and function and needs to be taken into consideration for in situ model catalysis studies.
|
|
7. |
- Blomberg, Sara, et al.
(author)
-
Strain Dependent Light-off Temperature in Catalysis Revealed by Planar Laser-Induced Fluorescence
- 2017
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 7:1, s. 110-114
-
Journal article (peer-reviewed)abstract
- Understanding how specific atom sites on metal surfaces lower the energy barrier for chemical reactions is vital in catalysis. Studies on simplified model systems have shown that atoms arranged as steps on the surface play an important role in catalytic reactions, but a direct comparison of how the light-off temperature is affected by the atom orientation on the step has not yet been possible due to methodological constraints. Here we report in situ spatially resolved measurements of the CO2 production over a cylindrical-shaped Pd catalyst and show that the light-off temperature at different parts of the crystal depends on the step orientation of the two types of steps (named A and B). Our finding is supported by density functional theory calculations, revealing that the steps, in contrast to what has been previously reported in the literature, are not directly involved in the reaction onset but have the role of releasing stress.
|
|
8. |
- Garcia-Martinez, Fernando, et al.
(author)
-
Catalytic oxidation of CO on a curved Pt(111) surface : simultaneous ignition at all facets through a transient CO-O complex.
- 2020
-
In: Angewandte Chemie International Edition. - : John Wiley & Sons. - 1433-7851 .- 1521-3773. ; 59:45, s. 20037-20043
-
Journal article (peer-reviewed)abstract
- The catalytic oxidation of carbon monoxide (CO) on transition metals, such as platinum (Pt), is commonly viewed as a sharp transition from the CO-inhibited surface to the active metal, covered with oxygen (O). However, we find that minor amounts of O are present in the CO-poisoned layer that explain why, surprisingly, CO desorbs at stepped and flat Pt crystal planes at once, regardless of the reaction conditions. Using near-ambient pressure X-ray photoemission and a curved Pt(111) crystal we probe the chemical composition at surfaces with variable step density during the CO oxidation reaction. The systematic analysis of carbon and oxygen core levels across the curved crystal reveals that, right before light-off, subsurface O builds up within (111) terraces. This is key to trigger the simultaneous ignition of the catalytic reaction at different Pt surfaces, as indicated by ab-initio theory: a CO-Pt-O complex is formed that equals the CO chemisorption energy at terraces and steps, leading to the abrupt desorption of poisoning CO from all crystal facets at the same temperature.
|
|
9. |
- Gustafson, Carl-Johan, et al.
(author)
-
Employing human keratinocytes cultured on macroporous gelatin spheres to treat full thickness-wounds : an in vivo study on athymic rats.
- 2007
-
In: Burns. - : Elsevier BV. - 0305-4179 .- 1879-1409. ; 33:6, s. 726-35
-
Journal article (peer-reviewed)abstract
- Providing cutaneous wounds with sufficient epidermis to prevent infections and fluid loss is one of the most challenging tasks associated with surgical treatment of burns. Recently, application of cultured keratinocytes in this context has allowed this challenge to be met without several of the limitations connected with the use of split-thickness skin grafts. The continuous development of this novel approach has now revealed that transplantation of cultured autologous keratinocytes as single-cell suspensions exhibits several advantages over the use of cultured epidermal grafts. However, a number of methodological problems remain to be solved, primarily with regards to the complexity of culturing these cells; loss of viability and other negative effects during their preparation and transportation; the relatively long period of time required following transplantation to obtain a sufficiently protective epidermis. In the present investigation we attempted to eliminate these limitations by culturing the keratinocytes on macroporous gelatin spheres. Accordingly, the efficacies of normal human keratinocytes in single-cell suspension or growing on macroporous gelatin spheres, as well as of split-thickness skin grafts in healing wounds on athymic rats were compared. Human keratinocytes were found to adhere and proliferate efficiently both on the surface and within the pores of such spheres. Transplantation of such cells adherent to the spheres resulted in significantly more rapid formation of a stratified epidermis than did transplantation of single-cell suspensions or spheres alone. Twenty-three days after transplantation, the epidermis formed from the cells bound to the spheres was not as thick as the epidermis on wounds covered with split-thickness skin grafts, but significantly thicker than on wounds to which single-cell suspensions, spheres alone or no transplant at all was applied. Furthermore, fluorescence in situ hybridisation revealed that the transplanted keratinocytes, both those adherent to gelatin spheres and those in single-cell suspension, were components of the newly formed epidermis. These findings indicate that application of biodegradable macroporous spheres may prove to be of considerable value in designing cell-based therapies for the treatment of acute and persistent wounds.
|
|
10. |
- Gustafson, Johan, et al.
(author)
-
One-dimensional PtO(2) at Pt steps : Formation and reaction with CO
- 2005
-
In: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 95:25, s. 1-4
-
Journal article (peer-reviewed)abstract
- Using core-level spectroscopy and density functional theory we show that a one-dimensional (1D) PtO(2) oxide structure forms at the steps of the Pt(332) surface after O(2) exposure. The 1D oxide is found to be stable in an oxygen pressure range, where bulk oxides are only metastable, and is therefore argued to be a precursor to the Pt oxidation. As an example of the consequences of such a precursor exclusively present at the steps, we investigate the reaction of CO with oxygen covered Pt(332). Albeit more strongly bound, the oxidic oxygen is found to react more easily with CO than oxygen chemisorbed on the Pt terraces.
|
|
11. |
|
|
12. |
- Lundgren, Edvin, et al.
(author)
-
Novel in Situ Techniques for Studies of Model Catalysts
- 2017
-
In: Accounts of Chemical Research. - : American Chemical Society (ACS). - 0001-4842 .- 1520-4898. ; 50:9, s. 2326-2333
-
Journal article (peer-reviewed)abstract
- ConspectusMotivated mainly by catalysis, gas-surface interaction between single crystal surfaces and molecules has been studied for decades. Most of these studies have been performed in well-controlled environments and have been instrumental for the present day understanding of catalysis, providing information on surface structures, adsorption sites, and adsorption and desorption energies relevant for catalysis. However, the approach has been criticized for being too far from a catalyst operating under industrial conditions at high temperatures and pressures. To this end, a significant amount of effort over the years has been used to develop methods to investigate catalysts at more realistic conditions under operating conditions. One result from this effort is a vivid and sometimes heated discussion concerning the active phase for the seemingly simple CO oxidation reaction over the Pt-group metals in the literature.In recent years, we have explored the possibilities to perform experiments at conditions closer to those of a technical catalyst, in particular at increased pressures and temperatures. In this contribution, results from catalytic CO oxidation over a Pd(100) single crystal surface using Near Ambient Pressure X-ray Photo emission Spectroscopy (NAPXPS), Planar Laser-Induced Fluorescence (PLIF), and High Energy Surface X-ray Diffraction (HESXRD) are presented, and the strengths and weaknesses of the experimental techniques are discussed. Armed with structural knowledge from ultrahigh vacuum experiments, the presence of adsorbed molecules and gas-phase induced surface structures can be identified and related to changes in the reactivity or to reaction induced gas-flow limitations. In particular, the application of PLIF to catalysis allows one to visualize how the catalyst itself changes the gas composition close to the model catalyst surface upon ignition, and relate this to the observed surface structures. The effect obscures a straightforward relation between the active phase and the activity, since in the case of CO oxidation, the gas-phase close to the model catalyst surface is shown to be significantly more oxidizing than far away from the catalyst. We show that surface structural knowledge from UHV experiments and the composition of the gas phase close to the catalyst surface are crucial to understand structure-function relationships at semirealistic conditions. In the particular case of Pd, we argue that the surface structure of the PdO(101) has a significant influence on the activity, due to the presence of Coordinatively Unsaturated Sites (CUS) Pd atoms, similar to undercoordinated Ru and Ir atoms found for RuO2(110) and IrO2(110), respectively.
|
|
13. |
- Matera, S., et al.
(author)
-
Evidence for the Active Phase of Heterogeneous Catalysts through In Situ Reaction Product Imaging and Multiscale Modeling
- 2015
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 5:8, s. 4514-4518
-
Journal article (peer-reviewed)abstract
- We use multiscale modeling to analyze laser-induced fluorescence (LIP) measurements of the CO oxidation reaction over Pd(100) at near-ambient reaction conditions. Integrating density functional theory-based kinetic Monte Carlo simulations of the active catalyst into fluid-dynamical simulations of the mass transport inside the reactor chamber, we calculate the reaction product concentration directly above the catalyst surface. Comparing corresponding data calculated for different surface models against the measured LIP signals, we can discriminate the one that predominantly actuates the experimentally measured catalytic activity. For the probed CO oxidation reaction conditions, the experimental activity is due to pristine Pd(100) possibly coexisting with other (oxidic) domains on the surface.
|
|
14. |
- Mehar, Vikram, et al.
(author)
-
Formation of Epitaxial PdO(100) During the Oxidation of Pd(100)
- 2023
-
In: The Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 14:38, s. 8493-8499
-
Journal article (other academic/artistic)abstract
- The catalytic oxidation of CO and CH4 can be strongly influenced by the structures of oxide phases that form on metallic catalysts during reaction. Here, we show that an epitaxial PdO(100) structure forms at temperatures above 600 K during the oxidation of Pd(100) by gaseous O atoms as well as exposure to O2-rich mixtures at millibar partial pressures. The oxidation of Pd(100) by gaseous O atoms preferentially generates an epitaxial, multilayer PdO(101) structure at 500 K, but initiating Pd(100) oxidation above 600 K causes an epitaxial PdO(100) structure to grow concurrently with PdO(101) and produces a thicker and rougher oxide. We present evidence that this change in the oxidation behavior is caused by a temperature-induced change in the stability of small PdO domains that initiate oxidation. Our discovery of the epitaxial PdO(100) structure may be significant for developing relationships among oxide structure, catalytic activity, and reaction conditions for applications of oxidation catalysis.
|
|
15. |
- Nilsson, Johan, 1987, et al.
(author)
-
Chemistry of supported palladium nanoparticles during methane oxidation
- 2015
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 5:4, s. 2481-2489
-
Journal article (peer-reviewed)abstract
- Time-resolved in situ energy-dispersive X-ray absorption spectroscopy and mass spectrometry are used to correlate changes in chemical state of alumina and ceria supported palladium nanoparticles with changes in activity and selectivity for methane oxidation. Specifically, modulation excitation spectroscopy experiments are carried out by periodically cycling between net-reducing and net-oxidizing reaction conditions. The XANES and EXAFS data show that the palladium nanoparticles are readily bulk oxidized when exposed to oxygen, forming a PdO-like phase, and reduced back to a reduced (metal) phase when oxygen is removed from the feed. The difference between the two support materials is most noticeable at the switches between net-oxidizing and net-reducing reaction conditions. Here, a brief reduction in conversion is observed for the alumina supported catalyst, but for the ceria this reduction in conversion is minor or not observed at all. This difference is attributed to differences in the oxidation kinetics and the oxygen storage capability of ceria.
|
|
16. |
- Seland, Havard, et al.
(author)
-
Transplantation of acellular dermis and keratinocytes cultured on porous biodegradable microcarriers into full-thickness skin injuries on athymic rats
- 2011
-
In: BURNS. - : Elsevier Science B.V., Amsterdam.. - 0305-4179. ; 37:1, s. 99-108
-
Journal article (peer-reviewed)abstract
- In search of an optimal transplantation regime for sufficient dermal and epidermal regeneration after a full-thickness skin injury, wounds on athymic rats were grafted with split-thickness skin grafts or acellular human dermis followed by transplantation with human keratinocytes either in single-cell suspension or cultured on porous biodegradable micro-carriers. After 2 weeks, all wounds grafted with acellular human dermis showed a well organised and vascularised dermal component and reepithelialisation on the grafted dermal matrix was complete 21 days after transplantation with human keratinocytes. Wounds grafted with human keratinocytes seeded on biodegradable microcarriers or split-thickness skin grafts displayed over time (i.e. 16-21 days post-transplantation) a significantly thicker epithelial cell layer in comparison to wounds grafted with keratinocytes in single-cell suspensions or microcarriers not seeded with cells. Furthermore, measurements of dermal thickness in the closed wounds 21 days after grafting showed a significantly thicker and well organised neodermal component in wounds transplanted with keratinocytes seeded on microcarriers or split-thickness skin grafts compared to all other wounds. Positive immunostaining towards von Willebrand factor revealed the plausible proangiogenic effects of transplantation with keratinocytes seeded on microcarriers. Analysis of representative tissue sections after fluorescence in situ hybridisation visualised that grafted human keratinocytes were present in the epidermal layers covering the wounds 16 and 21 days after transplantation, strongly indicating preservation of cell viability. These results shows that the use of biodegradable microcarriers in the culture of autologous keratinocytes for treatment of full-thickness wounds not only facilitate the cultivation, transportation and transplantation processes but also enhances the dermal regeneration induced by a dermal scaffold which results in a clinical result that is significantly superior to the one obtained when keratinocytes are transplanted in a single-cell suspension.
|
|
17. |
- Thörn, Johan, 1986, et al.
(author)
-
Fracture Deformation Measurements during Grouting in Hard Rock
- 2012
-
In: Geotechnical Special Publication. - Reston, VA : American Society of Civil Engineers. - 0895-0563. - 9780784412350 ; :228 GSP, s. 836-845
-
Conference paper (peer-reviewed)abstract
- When a fracture system in crystalline rock is grouted the rock mass may deform. Such deformations may reduce the grouting efficiency since new flow paths are opened. The work presented here show that deformations occur at hydraulic tests and grouting and that deformation can be measured and evaluated as stiffness from in situ tests. Deformation measurements, hydraulic testing, and grouting was conducted in spring 2010 in the Hallandsås tunnel and hydraulic testing in a service tunnel in Gothenburg (Runslätt and Thörn, 2010). For measuring physical deformation recently developed equipment from Chalmers University of Technology was used. Deformations were measured seven times in the same borehole. Three measurements were during grouting, and the remaining four from water pressure tests. Most deformations occurred at pump pressures of 1-1.4 MPa, which is lower than the calculated normal rock stress. Stiffness has been evaluated in several ways, including a new method, (Fransson, et al., 2010). Generally the evaluated stiffness is lower in the Hallandsås tunnel than in the Gothenburg tunnel. The results show agreement with other in situ experiments.
|
|
18. |
- Wang, Xueting, 1991, et al.
(author)
-
Copper-modified zeolites and silica for conversion of methane to methanol
- 2018
-
In: Catalysts. - : MDPI AG. - 2073-4344. ; 8:11
-
Journal article (peer-reviewed)abstract
- Powder materials containing copper ions supported on ZSM-5 (Cu-Zeolite Socony Mobil-5) and SSZ-13 (Cu-Standard Oil synthesised zeolite-13), and predominantly CuO nanoparticles on amorphous SiO2 were synthesised, characterised, wash-coated onto ceramic monoliths and, for the first time, compared as catalysts for direct conversion of methane to methanol (DCMM) at ambient pressure (1 atm) using O2, N2 O and NO as oxidants. Methanol production was monitored and quantified using Fourier transform infrared spectroscopy. Methanol is formed over all monolith samples, though the formation is considerably higher for the copper-exchanged zeolites. Hence, copper ions are the main active sites for DCMM. The minor amount of methanol produced over the Cu/SiO2 sample, however, suggests that zeolites are not the sole substrate that can host those active copper sites but also silica. Further, we present the first ambient pressure in situ infrared spectroscopic measurements revealing the formation and consumption of surface methoxy species, which are considered to be key intermediates in the DCMM reaction.
|
|
19. |
- Wang, Xueting, 1991, et al.
(author)
-
Methanol Desorption From Cu-ZSM-5 Studied by In Situ Infrared Spectroscopy and First-Principles Calculations
- 2017
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 121:49, s. 27389-27398
-
Journal article (peer-reviewed)abstract
- The dynamic interaction of methanol and its derivatives with Cu-exchanged ZSM- 5 during methanol temperature programmed desorption from 30 to 450 ◦C has been investigated using in situ diffuse reflectance infrared Fourier transform spectroscopy and first-principles calculations. The results emphasize that defects in the framework structure of the zeolite and Brønsted acid sites constitute ion-exchange sites for Cu ions. The Cu sites introduced in ZSM-5 actively interact with methanol adsorbed at moderate temperature, i.e. below 250◦C, and take roles in further oxidation of the adsorbed species to formate and CO. Moreover, spectra recorded at higher temperatures, i.e. above 300◦C, after adsorption of methanol show strong interaction between methoxy groups and the zeolite framework, suggesting that under mild conditions proton extraction for methanol production during direct partial oxidation of methane to methanol over Cu-ZSM-5 is necessary.
|
|
20. |
- Zetterberg, Johan, et al.
(author)
-
An in situ set up for the detection of CO(2) from catalytic CO oxidation by using planar laser-induced fluorescence.
- 2012
-
In: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 83:5
-
Journal article (peer-reviewed)abstract
- We report the first experiment carried out on an in situ setup, which allows for detection of CO(2) from catalytic CO oxidation close to a model catalyst under realistic reaction conditions by the means of planar laser-induced fluorescence (PLIF) in the mid-infrared spectral range. The onset of the catalytic reaction as a function of temperature was followed by PLIF in a steady state flow reactor. After taking into account the self-absorption of CO(2), a good agreement between the detected CO(2) fluorescence signal and the CO(2) mass spectrometry signal was shown. The observed difference to previously measured onset temperatures for the catalytic ignition is discussed and the potential impact of IR-PLIF as a detection technique in catalysis is outlined.
|
|
21. |
- Zetterberg, Johan, et al.
(author)
-
Planar laser induced fluorescence applied to catalysis
- 2017
-
In: Springer Series in Chemical Physics. - Cham : Springer International Publishing. - 0172-6218. ; 114, s. 131-149
-
Book chapter (peer-reviewed)abstract
- In this chapter we describe Planar Laser Induced Fluorescence (PLIF) to investigate the reactants or products in the vicinity of a catalyst at semi-realistic conditions. PLIF provides a 2D view of the gas-phase distribution of a pre-chosen gas. Here we present PLIF results from CO2 and CO from the oxidation of CO into CO2 by Pd single crystals and by various powder catalysts as well as from NH3 from the oxidation of NH3 above a Ag/Al2O3 powder catalyst.We describe our experimental set-up in detail, and the laser instrumentation needed to enable detectable gas fluorescence from CO2, CO, and NH3, respectively. Further, intensity corrections of the PLIF signal due to scattering and temperature effects are described. In the case of the CO oxidation, the results directly show the creation of a CO2 boundary layer and thus a drastic change of the gas-phase composition close to the catalyst surface, illustrating the effect of gas diffusion and reaction speed, which in turn should affect the surface structure of the active catalyst. The 2D character of the PLIF images is used to investigate differences in catalyst activity by studying adjacent catalysts in the reaction cell during the reaction, and a solution to avoid spill-over effects between catalysts in the same reactor is presented. The results from PLIF images of CO of the same reaction show the corresponding depletion of the PLIF intensity above the catalyst, in accordance with observations from other techniques confirming the drastic difference between the gas composition close to the catalyst and at the inlet or outlet of the reactor. Finally we present NH3 PLIF results from above a Ag/Al2O3 powder catalyst while the NH3 is being oxidized in an oxidizing environment with the assistance of H2.
|
|
22. |
- Zetterberg, Johan, et al.
(author)
-
Spatially and temporally resolved gas distributions around heterogeneous catalysts using infrared planar laser-induced fluorescence.
- 2015
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 6
-
Journal article (peer-reviewed)abstract
- Visualizing and measuring the gas distribution in close proximity to a working catalyst is crucial for understanding how the catalytic activity depends on the structure of the catalyst. However, existing methods are not able to fully determine the gas distribution during a catalytic process. Here we report on how the distribution of a gas during a catalytic reaction can be imaged in situ with high spatial (400 μm) and temporal (15 μs) resolution using infrared planar laser-induced fluorescence. The technique is demonstrated by monitoring, in real-time, the distribution of carbon dioxide during catalytic oxidation of carbon monoxide above powder catalysts. Furthermore, we demonstrate the versatility and potential of the technique in catalysis research by providing a proof-of-principle demonstration of how the activity of several catalysts can be measured simultaneously, either in the same reactor chamber, or in parallel, in different reactor tubes.
|
|
23. |
- Zhou, Jianfeng, et al.
(author)
-
Simultaneous Imaging of Gas Phase over and Surface Reflectance of a Pd(100) Single Crystal during CO Oxidation
- 2017
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 121:42, s. 23511-23519
-
Journal article (peer-reviewed)abstract
- A direct correlation between the reaction activity and the surface structure of a catalyst is generally needed to better understand the mechanisms behind the heterogeneous catalysis process. In this work, we employed planar laser-induced fluorescence (PLIF) to spatially resolve the CO2 distribution just above a Pd(100) surface, and simultaneously monitored the optical reflectance of the surface, during CO oxidation. We show that when the reaction is in the mass transfer limited regime, the inhomogeneity of the gas composition over the sample can lead to an inhomogeneity of the surface reflectance change arising from oxide formation and surface roughening. The combination of PLIF and surface reflectance also makes it possible to spatially resolve and simultaneously follow the dynamics of the gas phase and the surface on a subsecond time scale during self-sustained reaction oscillations of a Pd(100) surface, providing insights into the gas-surface interaction.
|
|
24. |
- Zhou, Jianfeng, et al.
(author)
-
Visualization of gas distribution in a model AP-XPS reactor by PLIF : Co oxidation over a Pd(100) catalyst
- 2017
-
In: Catalysts. - : MDPI AG. - 2073-4344. ; 7:1
-
Journal article (peer-reviewed)abstract
- In situ knowledge of the gas phase around a catalyst is essential to make an accurate correlation between the catalytic activity and surface structure in operando studies. Although ambient pressure X-ray photoelectron spectroscopy (AP-XPS) can provide information on the gas phase as well as the surface structure of a working catalyst, the gas phase detected has not been spatially resolved to date, thus possibly making it ambiguous to interpret the AP-XPS spectra. In this work, planar laser-induced fluorescence (PLIF) is used to visualize the CO2 distribution in a model AP-XPS reactor, during CO oxidation over a Pd(100) catalyst. The results show that the gas composition in the vicinity of the sample measured by PLIF is significantly different from that measured by a conventional mass spectrometer connected to a nozzle positioned just above the sample. In addition, the gas distribution above the catalytic sample has a strong dependence on the gas flow and total chamber pressure. The technique presented has the potential to increase our knowledge of the gas phase in AP-XPS, as well as to optimize the design and operating conditions of in situ AP-XPS reactors for catalysis studies.
|
|
25. |
|
|