1. |
- Aad, G, et al.
(author)
-
Searches for scalar leptoquarks in pp collisions at [Formula: see text] = 8 TeV with the ATLAS detector.
- 2016
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 76
-
Journal article (peer-reviewed)abstract
- Searches for pair-produced scalar leptoquarks are performed using 20 fb[Formula: see text] of proton-proton collision data provided by the LHC and recorded by the ATLAS detector at [Formula: see text] TeV. Events with two electrons (muons) and two or more jets in the final state are used to search for first (second)-generation leptoquarks. The results from two previously published ATLAS analyses are interpreted in terms of third-generation leptoquarks decaying to [Formula: see text] and [Formula: see text] final states. No statistically significant excess above the Standard Model expectation is observed in any channel and scalar leptoquarks are excluded at 95 % CL with masses up to [Formula: see text] 1050 GeV for first-generation leptoquarks, [Formula: see text] 1000 GeV for second-generation leptoquarks, [Formula: see text] 625 GeV for third-generation leptoquarks in the [Formula: see text] channel, and 200 [Formula: see text] 640 GeV in the [Formula: see text] channel.
|
|
2. |
- Aad, G, et al.
(author)
-
Measurements of fiducial cross-sections for [Formula: see text] production with one or two additional b-jets in pp collisions at [Formula: see text]=8 TeV using the ATLAS detector.
- 2016
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 76
-
Journal article (peer-reviewed)abstract
- Fiducial cross-sections for [Formula: see text] production with one or two additional b-jets are reported, using an integrated luminosity of 20.3 fb[Formula: see text] of proton-proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for [Formula: see text] events with at least one additional b-jet is measured to be 950 [Formula: see text] 70 (stat.) [Formula: see text] (syst.) fb in the lepton-plus-jets channel and 50 [Formula: see text] 10 (stat.) [Formula: see text] (syst.) fb in the [Formula: see text] channel. The cross-section times branching ratio for events with at least two additional b-jets is measured to be 19.3 [Formula: see text] 3.5 (stat.) [Formula: see text] 5.7 (syst.) fb in the dilepton channel ([Formula: see text], [Formula: see text], and ee) using a method based on tight selection criteria, and 13.5 [Formula: see text] 3.3 (stat.) [Formula: see text] 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 [Formula: see text] 0.33 (stat.) [Formula: see text] 0.28 (syst.)% for the ratio of [Formula: see text] production with two additional b-jets to [Formula: see text] production with any two additional jets. All measurements are in good agreement with recent theory predictions.
|
|
3. |
- Aad, G., et al.
(author)
-
- 2015
-
In: Journal of High Energy Physics. - : Springer. - 1029-8479 .- 1126-6708. ; :12
-
Journal article (peer-reviewed)
|
|
4. |
|
|
5. |
|
|
6. |
|
|
7. |
- Aad, G., et al.
(author)
-
- 2016
-
In: Journal of High Energy Physics. - : Springer. - 1029-8479 .- 1126-6708. ; :1
-
Journal article (peer-reviewed)
|
|
8. |
- Aad, G., et al.
(author)
-
- 2015
-
In: Physical Review D. Particles and fields. - : American Physical Society. - 0556-2821 .- 1089-4918. ; 92:9
-
Journal article (peer-reviewed)
|
|
9. |
- Aad, G., et al.
(author)
-
- 2015
-
In: Physical Review D. Particles and fields. - : American Physics Society. - 0556-2821 .- 1089-4918. ; 92:11
-
Journal article (peer-reviewed)
|
|
10. |
- Aad, G., et al.
(author)
-
- 2016
-
In: Physical Review D. Particles and fields. - : American Physical Society. - 0556-2821 .- 1089-4918. ; 93:1
-
Journal article (peer-reviewed)
|
|
11. |
- Aad, G., et al.
(author)
-
- 2015
-
In: Journal of High Energy Physics. - : Springer. - 1029-8479 .- 1126-6708. ; :11
-
Journal article (peer-reviewed)
|
|
12. |
- Joffrin, E., et al.
(author)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
13. |
- Thomas, HS, et al.
(author)
-
- 2019
-
swepub:Mat__t
|
|
14. |
- Mindur, B, et al.
(author)
-
Gas gain stabilisation in the ATLAS TRT detector
- 2016
-
In: Journal of Instrumentation. - 1748-0221. ; 11:4
-
Journal article (peer-reviewed)abstract
- The ATLAS (one of two general purpose detectors at the LHC) Transition Radiation Tracker (TRT) is the outermost of the three tracking subsystems of the ATLAS Inner Detector. It is a large straw-based detector and contains about 350,000 electronics channels. The performance of the TRT as tracking and particularly particle identification detector strongly depends on stability of the operation parameters with most important parameter being the gas gain which must be kept constant across the detector volume. The gas gain in the straws can vary significantly with atmospheric pressure, temperature, and gas mixture composition changes. This paper presents a concept of the gas gain stabilisation in the TRT and describes in detail the Gas Gain Stabilisation System (GGSS) integrated into the Detector Control System (DCS). Operation stability of the GGSS during Run-1 is demonstrated.
|
|
15. |
- Abdesselam, A., et al.
(author)
-
Engineering for the ATLAS SemiConductor Tracker (SCT) end-cap
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3
-
Journal article (peer-reviewed)abstract
- The ATLAS SemiConductor Tracker (SCT) is a silicon-strip tracking detector which forms part of the ATLAS inner detector. The SCT is designed to track charged particles produced in proton-proton collisions at the Large Hadron Collider (LHC) at CERN at an energy of 14 TeV. The tracker is made up of a central barrel and two identical end-caps. The barrel contains 2112 silicon modules, while each end-cap contains 988 modules. The overall tracking performance depends not only on the intrinsic measurement precision of the modules but also on the characteristics of the whole assembly, in particular, the stability and the total material budget. This paper describes the engineering design and construction of the SCT end-caps, which are required to support mechanically the silicon modules, supply services to them and provide a suitable environment within the inner detector. Critical engineering choices are highlighted and innovative solutions are presented - these will be of interest to other builders of large-scale tracking detectors. The SCT end-caps will be fully connected at the start of 2008. Further commissioning will continue, to be ready for proton-proton collision data in 2008.
|
|
16. |
- Abdesselam, A., et al.
(author)
-
The barrel modules of the ATLAS semiconductor tracker
- 2006
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 568:2, s. 642-671
-
Journal article (peer-reviewed)abstract
- This paper describes the silicon microstrip modules in the barrel section of the SemiConductor Tracker (SCT) of the ATLAS experiment at the CERN Large Hadron Collider (LHC). The module requirements, components and assembly techniques are given, as well as first results of the module performance on the fully assembled barrels that make up the detector being installed in the ATLAS experiment.
|
|
17. |
- Tierney, W., et al.
(author)
-
A creative destruction approach to replication : Implicit work and sex morality across cultures
- 2021
-
In: Journal of Experimental Social Psychology. - : Elsevier BV. - 0022-1031 .- 1096-0465. ; 93
-
Journal article (peer-reviewed)abstract
- How can we maximize what is learned from a replication study? In the creative destruction approach to replication, the original hypothesis is compared not only to the null hypothesis, but also to predictions derived from multiple alternative theoretical accounts of the phenomenon. To this end, new populations and measures are included in the design in addition to the original ones, to help determine which theory best accounts for the results across multiple key outcomes and contexts. The present pre-registered empirical project compared the Implicit Puritanism account of intuitive work and sex morality to theories positing regional, religious, and social class differences; explicit rather than implicit cultural differences in values; self-expression vs. survival values as a key cultural fault line; the general moralization of work; and false positive effects. Contradicting Implicit Puritanism's core theoretical claim of a distinct American work morality, a number of targeted findings replicated across multiple comparison cultures, whereas several failed to replicate in all samples and were identified as likely false positives. No support emerged for theories predicting regional variability and specific individual-differences moderators (religious affiliation, religiosity, and education level). Overall, the results provide evidence that work is intuitively moralized across cultures.
|
|
18. |
- Tabiri, S, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
19. |
- Khatri, C, et al.
(author)
-
Outcomes after perioperative SARS-CoV-2 infection in patients with proximal femoral fractures: an international cohort study
- 2021
-
In: BMJ open. - : BMJ. - 2044-6055. ; 11:11, s. e050830-
-
Journal article (peer-reviewed)abstract
- Studies have demonstrated high rates of mortality in people with proximal femoral fracture and SARS-CoV-2, but there is limited published data on the factors that influence mortality for clinicians to make informed treatment decisions. This study aims to report the 30-day mortality associated with perioperative infection of patients undergoing surgery for proximal femoral fractures and to examine the factors that influence mortality in a multivariate analysis.SettingProspective, international, multicentre, observational cohort study.ParticipantsPatients undergoing any operation for a proximal femoral fracture from 1 February to 30 April 2020 and with perioperative SARS-CoV-2 infection (either 7 days prior or 30-day postoperative).Primary outcome30-day mortality. Multivariate modelling was performed to identify factors associated with 30-day mortality.ResultsThis study reports included 1063 patients from 174 hospitals in 19 countries. Overall 30-day mortality was 29.4% (313/1063). In an adjusted model, 30-day mortality was associated with male gender (OR 2.29, 95% CI 1.68 to 3.13, p<0.001), age >80 years (OR 1.60, 95% CI 1.1 to 2.31, p=0.013), preoperative diagnosis of dementia (OR 1.57, 95% CI 1.15 to 2.16, p=0.005), kidney disease (OR 1.73, 95% CI 1.18 to 2.55, p=0.005) and congestive heart failure (OR 1.62, 95% CI 1.06 to 2.48, p=0.025). Mortality at 30 days was lower in patients with a preoperative diagnosis of SARS-CoV-2 (OR 0.6, 95% CI 0.6 (0.42 to 0.85), p=0.004). There was no difference in mortality in patients with an increase to delay in surgery (p=0.220) or type of anaesthetic given (p=0.787).ConclusionsPatients undergoing surgery for a proximal femoral fracture with a perioperative infection of SARS-CoV-2 have a high rate of mortality. This study would support the need for providing these patients with individualised medical and anaesthetic care, including medical optimisation before theatre. Careful preoperative counselling is needed for those with a proximal femoral fracture and SARS-CoV-2, especially those in the highest risk groups.Trial registration numberNCT04323644
|
|
20. |
|
|
21. |
- Bravo, L, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
22. |
|
|
23. |
- Yakushev, A., et al.
(author)
-
On the adsorption and reactivity of element 114, flerovium
- 2022
-
In: Frontiers in Chemistry. - : Frontiers Media SA. - 2296-2646. ; 10
-
Journal article (peer-reviewed)abstract
- Flerovium (Fl, element 114) is the heaviest element chemically studied so far. To date, its interaction with gold was investigated in two gas-solid chromatography experiments, which reported two different types of interaction, however, each based on the level of a few registered atoms only. Whereas noble-gas-like properties were suggested from the first experiment, the second one pointed at a volatile-metal-like character. Here, we present further experimental data on adsorption studies of Fl on silicon oxide and gold surfaces, accounting for the inhomogeneous nature of the surface, as it was used in the experiment and analyzed as part of the reported studies. We confirm that Fl is highly volatile and the least reactive member of group 14. Our experimental observations suggest that Fl exhibits lower reactivity towards Au than the volatile metal Hg, but higher reactivity than the noble gas Rn.
|
|
24. |
|
|
25. |
- Di Nitto, A., et al.
(author)
-
Study of Non-fusion Products in the 50Ti+249Cf Reaction
- 2018
-
In: Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 784, s. 199-205
-
Journal article (peer-reviewed)abstract
- The isotopic distribution of nuclei produced in the 50Ti + 249Cf reaction has been studied at the gas-filled recoil separator TASCA at GSI Darmstadt, which separates ions according to differences in magnetic rigidity. The bombardment was performed at an energy around the Bass barrier and with the TASCA magnetic fields set for collecting fusion-evaporation reaction products. Fifty-three isotopes located “north-east” of 208Pb were identified as recoiling products formed in non-fusion channels of the reaction. These recoils were implanted with energies in two distinct ranges; besides one with higher energy, a significant low-energy contribution was identified. The latter observation was not expected to occur according to kinematics of the known types of reactions, namely quasi-elastic, multi-nucleon transfer, deep-inelastic collisions or quasifission. The present observations are discussed within the framework of two-body kinematics passing through the formation of a composite system.
|
|