| 1. |
- Tran, K. B., et al.
(author)
-
The global burden of cancer attributable to risk factors, 2010-19: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
In: Lancet. - 0140-6736. ; 400:10352, s. 563-591
-
Journal article (peer-reviewed)abstract
- Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 2. |
- Ikuta, K. S., et al.
(author)
-
Global mortality associated with 33 bacterial pathogens in 2019: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
In: Lancet. - : Elsevier BV. - 0140-6736. ; 400:10369, s. 2221-2248
-
Journal article (peer-reviewed)abstract
- Background Reducing the burden of death due to infection is an urgent global public health priority. Previous studies have estimated the number of deaths associated with drug-resistant infections and sepsis and found that infections remain a leading cause of death globally. Understanding the global burden of common bacterial pathogens (both susceptible and resistant to antimicrobials) is essential to identify the greatest threats to public health. To our knowledge, this is the first study to present global comprehensive estimates of deaths associated with 33 bacterial pathogens across 11 major infectious syndromes. Methods We estimated deaths associated with 33 bacterial genera or species across 11 infectious syndromes in 2019 using methods from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019, in addition to a subset of the input data described in the Global Burden of Antimicrobial Resistance 2019 study. This study included 343 million individual records or isolates covering 11 361 study-location-years. We used three modelling steps to estimate the number of deaths associated with each pathogen: deaths in which infection had a role, the fraction of deaths due to infection that are attributable to a given infectious syndrome, and the fraction of deaths due to an infectious syndrome that are attributable to a given pathogen. Estimates were produced for all ages and for males and females across 204 countries and territories in 2019. 95% uncertainty intervals (UIs) were calculated for final estimates of deaths and infections associated with the 33 bacterial pathogens following standard GBD methods by taking the 2.5th and 97.5th percentiles across 1000 posterior draws for each quantity of interest. Findings From an estimated 13.7 million (95% UI 10.9-17.1) infection-related deaths in 2019, there were 7.7 million deaths (5.7-10.2) associated with the 33 bacterial pathogens (both resistant and susceptible to antimicrobials) across the 11 infectious syndromes estimated in this study. We estimated deaths associated with the 33 bacterial pathogens to comprise 13.6% (10.2-18.1) of all global deaths and 56.2% (52.1-60.1) of all sepsis-related deaths in 2019. Five leading pathogens-Staphylococcus aureus, Escherichia coli, Streptococcus pneumoniae, Klebsiella pneumoniae, and Pseudomonas aeruginosa-were responsible for 54.9% (52.9-56.9) of deaths among the investigated bacteria. The deadliest infectious syndromes and pathogens varied by location and age. The age-standardised mortality rate associated with these bacterial pathogens was highest in the sub-Saharan Africa super-region, with 230 deaths (185-285) per 100 000 population, and lowest in the high-income super-region, with 52.2 deaths (37.4-71.5) per 100 000 population. S aureus was the leading bacterial cause of death in 135 countries and was also associated with the most deaths in individuals older than 15 years, globally. Among children younger than 5 years, S pneumoniae was the pathogen associated with the most deaths. In 2019, more than 6 million deaths occurred as a result of three bacterial infectious syndromes, with lower respiratory infections and bloodstream infections each causing more than 2 million deaths and peritoneal and intra-abdominal infections causing more than 1 million deaths. Interpretation The 33 bacterial pathogens that we investigated in this study are a substantial source of health loss globally, with considerable variation in their distribution across infectious syndromes and locations. Compared with GBD Level 3 underlying causes of death, deaths associated with these bacteria would rank as the second leading cause of death globally in 2019; hence, they should be considered an urgent priority for intervention within the global health community. Strategies to address the burden of bacterial infections include infection prevention, optimised use of antibiotics, improved capacity for microbiological analysis, vaccine development, and improved and more pervasive use of available vaccines. These estimates can be used to help set priorities for vaccine need, demand, and development. Copyright (c) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Klionsky, Daniel J., et al.
(author)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
In: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Research review (peer-reviewed)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 11. |
|
|
| 12. |
- Bass, Gary Alan, 1979-, et al.
(author)
-
Techniques for mesoappendix transection and appendix resection: insights from the ESTES SnapAppy study
- 2023
-
In: European Journal of Trauma and Emergency Surgery. - : Springer Science and Business Media LLC. - 1863-9933 .- 1615-3146 .- 1863-9941. ; 49, s. 17-32
-
Journal article (peer-reviewed)abstract
- Introduction: Surgically managed appendicitis exhibits great heterogeneity in techniques for mesoappendix transection and appendix amputation from its base. It is unclear whether a particular surgical technique provides outcome benefit or reduces complications. Material and methods: We undertook a pre-specified subgroup analysis of all patients who underwent laparoscopic appendectomy at index admission during SnapAppy (ClinicalTrials.gov Registration: NCT04365491). We collected routine, anonymized observational data regarding surgical technique, patient demographics and indices of disease severity, without change to clinical care pathway or usual surgeon preference. Outcome measures of interest were the incidence of complications, unplanned reoperation, readmission, admission to the ICU, death, hospital length of stay, and procedure duration. We used Poisson regression models with robust standard errors to calculate incident rate ratios (IRRs) and 95% confidence intervals (CIs). Results: Three-thousand seven hundred sixty-eight consecutive adult patients, included from 71 centers in 14 countries, were followed up from date of admission for 90days. The mesoappendix was divided hemostatically using electrocautery in 1564(69.4%) and an energy device in 688(30.5%). The appendix was amputated by division of its base between looped ligatures in 1379(37.0%), with a stapler in 1421(38.1%) and between clips in 929(24.9%). The technique for securely dividing the appendix at its base in acutely inflamed (AAST Grade 1) appendicitis was equally divided between division between looped ligatures, clips and stapled transection. However, the technique used differed in complicated appendicitis (AAST Grade 2 +) compared with uncomplicated (Grade 1), with a shift toward transection of the appendix base by stapler (58% vs. 38%; p < 0.001). While no statistical difference in outcomes could be detected between different techniques for division of appendix base, decreased risk of any [adjusted IRR (95% CI): 0.58 (0.41–0.82), p = 0.002] and severe [adjusted IRR (95% CI): 0.33 (0.11–0.96), p = 0.045] complications could be detected when using energy devices. Conclusions: Safe mesoappendix transection and appendix resection are accomplished using heterogeneous techniques. Technique selection for both mesoappendix transection and appendix resection correlates with AAST grade. Higher grade led to more ultrasonic tissue transection and stapled appendix resection. Higher AAST appendicitis grade also correlated with infection-related complication occurrence. Despite the overall well-tolerated heterogeneity of approaches to acute appendicitis, increasing disease acuity or complexity appears to encourage homogeneity of intraoperative surgical technique toward advanced adjuncts.
|
|
| 13. |
- Forssten, Maximilian Peter, 1996-, et al.
(author)
-
Surgical management of acute appendicitis during the European COVID-19 second wave: safe and effective
- 2023
-
In: European Journal of Trauma and Emergency Surgery. - : Springer Science and Business Media LLC. - 1863-9933 .- 1615-3146 .- 1863-9941. ; 49, s. 57-67
-
Journal article (peer-reviewed)abstract
- Introduction: The COVID-19 (SARS-CoV-2) pandemic drove acute care surgeons to pivot from long established practice patterns. Early safety concerns regarding increased postoperative complication risk in those with active COVID infection promoted antibiotic-driven non-operative therapy for select conditions ahead of an evidence-base. Our study assesses whether active or recent SARS-CoV-2 positivity increases hospital length of stay (LOS) or postoperative complications following appendectomy. Methods: Data were derived from the prospective multi-institutional observational SnapAppy cohort study. This preplanned data analysis assessed consecutive patients aged ≥ 15years who underwent appendectomy for appendicitis (November 2020–May 2021). Patients were categorized based on SARS-CoV-2 seropositivity: no infection, active infection, and prior infection. Appendectomy method, LOS, and complications were abstracted. The association between SARS-CoV-2 seropositivity and complications was determined using Poisson regression, while the association with LOS was calculated using a quantile regression model. Results: Appendectomy for acute appendicitis was performed in 4047 patients during the second and third European COVID waves. The majority were SARS-CoV-2 uninfected (3861, 95.4%), while 70 (1.7%) were acutely SARS-CoV-2 positive, and 116 (2.8%) reported prior SARS-CoV-2 infection. After confounder adjustment, there was no statistically significant association between SARS-CoV-2 seropositivity and LOS, any complication, or severe complications. Conclusion: During sequential SARS-CoV-2 infection waves, neither active nor prior SARS-CoV-2 infection was associated with prolonged hospital LOS or postoperative complication. Despite early concerns regarding postoperative safety and outcome during active SARS-CoV-2 infection, no such association was noted for those with appendicitis who underwent operative management.
|
|
| 14. |
- Sheykhifard, Z., et al.
(author)
-
Magnetic graphene/Ni-nano-crystal hybrid for small field magnetoresistive effect synthesized via electrochemical exfoliation/deposition technique
- 2018
-
In: Journal of Materials Science-Materials in Electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 29:5, s. 4171-4178
-
Journal article (peer-reviewed)abstract
- Two-dimensional heterostructures of graphene (Gr) and metal/semiconducting elements convey new direction in electronic devices. They can be useful for spintronics because of small spin orbit interaction of Gr as a non-magnetic metal host with promising electrochemical stability. In this paper, we demonstrate one-step fabrication of magnetic Ni-particles entrapped within Gr-flakes based on simultaneous electrochemical exfoliation/deposition procedure by two-electrode system using platinum as the cathode electrode and a graphite foil as the anode electrode. The final product is an air stable hybrid element including Gr flakes hosting magnetic Ni-nano-crystals showing superparamagnetic-like response and room temperature giant magnetoresistance (GMR) effect at small magnetic field range. The GMR effect is originated from spin scattering through ferromagnetic/non-magnetic nature of Ni/Gr heterostructure and interpreted based on a phenomenological spin transport model. Our work benefits from XRD, XPS, Raman, TEM, FTIR and VSM measurements We addressed that how our results can be used for rapid manufacturing of magnetic Gr for low field magneto resistive elements and potential printed spintronic devices.
|
|
| 15. |
|
|
| 16. |
- Ahmadi, K., et al.
(author)
-
Inducing Dzyaloshinskii-Moriya interaction in symmetrical multilayers using post annealing
- 2022
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 12:1
-
Journal article (peer-reviewed)abstract
- The interfacial Dzyaloshinskii-Moriya Interaction (iDMI) is an antisymmetric exchange interaction that is induced by the broken inversion symmetry at the interface of, e.g., a ferromagnet/heavy metal. Thus, the presence of iDMI is not expected in symmetrical multilayer stacks of such structures. Here, we use thermal annealing to induce the iDMI in a [Py/Pt](x10) symmetrical multilayer stack. Brillouin light scattering spectroscopy is used to directly evidence the iDMI induction in the annealed sample. Structural characterizations highlight the modified crystallinity as well as a higher surface roughness of the sample after annealing. First principles electronic structure calculations demonstrate a monotonic increase of the iDMI with the interfacial disorder due to the interdiffusion of atoms, depicting the possible origin of the induced iDMI. The presented method can be used to tune the iDMI strength in symmetric multilayers, which are the integral part of racetrack memories, magnonic devices as well as spin-orbitronic elements.
|
|
| 17. |
- Polyakov, A., et al.
(author)
-
Instability of the topological surface state in Bi2Se3 upon deposition of gold
- 2017
-
In: Physical Review B. - : American Physical Society. - 2469-9950 .- 2469-9969. ; 95:18
-
Journal article (peer-reviewed)abstract
- Momentum-resolved photoemission spectroscopy indicates the instability of the Dirac surface state upon deposition of gold on the (0001) surface of the topological insulator Bi2Se3. Based on the structure model derived from extended x-ray absorption fine structure experiments showing that gold atoms substitute bismuth atoms, first-principles calculations provide evidence that a gap appears due to hybridization of the surface state with gold d states near the Fermi level. Our findings provide insights into the mechanisms affecting the stability of the surface state.
|
|
| 18. |
- Polyakov, A., et al.
(author)
-
Reply to Comment on 'Instability of the topological surface state in Bi2Se3 upon deposition of gold'
- 2018
-
In: Physical Review B. - : American Physical Society. - 2469-9950 .- 2469-9969. ; 98:13
-
Journal article (peer-reviewed)abstract
- In the Comment on our publication [Phys. Rev. B 95, 180202(R) (2017)], R. A. Gordon claims that our main conclusion is not valid, namely that gold atoms deposited in situ on the (0001) surface of single-crystalline Bi2Se3 reside in substitutional sites, i.e., replacing bismuth atoms within the topmost quintuple layer (QL). Based on x-ray absorption near-edge (XANES) spectra and a re-evaluation of extended x-ray absorption fine structure (EXAFS) data above the Au L-III edge, R. A. Gordon concludes that Au resides in a twofold environment as a result of an interface reaction leading to an Au2S-type local structure, in which gold adopts an Au(I) state and is linearly coordinated by selenium atoms. In this Reply, we will confirm the results published in the original paper and their interpretation that Au atoms reside in the substitutional site.
|
|
| 19. |
- Ahlberg, Martina, et al.
(author)
-
Freezing and thawing magnetic droplet solitons
- 2022
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Journal article (peer-reviewed)abstract
- Magnetic droplets are a type of non-topological magnetic soliton, which are stabilised and sustained by spin-transfer torques for instance. Without this, they would collapse. Here Ahlberg et al show that by decreasing the applied magnetic field, droplets can be frozen, forming a static nanobubble Magnetic droplets are non-topological magnetodynamical solitons displaying a wide range of complex dynamic phenomena with potential for microwave signal generation. Bubbles, on the other hand, are internally static cylindrical magnetic domains, stabilized by external fields and magnetostatic interactions. In its original theory, the droplet was described as an imminently collapsing bubble stabilized by spin transfer torque and, in its zero-frequency limit, as equivalent to a bubble. Without nanoscale lateral confinement, pinning, or an external applied field, such a nanobubble is unstable, and should collapse. Here, we show that we can freeze dynamic droplets into static nanobubbles by decreasing the magnetic field. While the bubble has virtually the same resistance as the droplet, all signs of low-frequency microwave noise disappear. The transition is fully reversible and the bubble can be thawed back into a droplet if the magnetic field is increased under current. Whereas the droplet collapses without a sustaining current, the bubble is highly stable and remains intact for days without external drive. Electrical measurements are complemented by direct observation using scanning transmission x-ray microscopy, which corroborates the analysis and confirms that the bubble is stabilized by pinning.
|
|
| 20. |
- Banuazizi, Seyed Amir Hossein, et al.
(author)
-
Order of magnitude improvement of nano-contact spin torque nano-oscillator performance
- 2017
-
In: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 9:5, s. 1896-1900
-
Journal article (peer-reviewed)abstract
- Spin torque nano-oscillators (STNO) represent a unique class of nano-scale microwave signal generators and offer a combination of intriguing properties, such as nano sized footprint, ultrafast modulation rates, and highly tunable microwave frequencies from 100 MHz to close to 100 GHz. However, their low output power and relatively high threshold current still limit their applicability and must be improved. In this study, we investigate the influence of the bottom Cu electrode thickness (t(Cu)) in nano-contact STNOs based on Co/Cu/NiFe GMR stacks and with nano-contact diameters ranging from 60 to 500 nm. Increasing t(Cu) from 10 to 70 nm results in a 40% reduction of the threshold current, an order of magnitude higher microwave output power, and close to two orders of magnitude better power conversion efficiency. Numerical simulations of the current distribution suggest that these dramatic improvements originate from a strongly reduced lateral current spread in the magneto-dynamically active region.
|
|
| 21. |
- Burgos-Parra, E., et al.
(author)
-
Investigation of magnetic droplet solitons using x-ray holography with extended references
- 2018
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 8
-
Journal article (peer-reviewed)abstract
- A dissipative magnetic soliton, or magnetic droplet, is a structure that has been predicted to exist within a thin magnetic layer when non-linearity is balanced by dispersion, and a driving force counteracts the inherent damping of the spin precession. Such a soliton can be formed beneath a nano-contact (NC) that delivers a large spin-polarized current density into a magnetic layer with perpendicular magnetic anisotropy. Although the existence of droplets has been confirmed from electrical measurements and by micromagnetic simulations, only a few attempts have been made to directly observe the magnetic landscape that sustains these structures, and then only for a restricted set of experimental parameter values. In this work we use and x-ray holography technique HERALDO, to image the magnetic structure of the [ Co/ Ni] x4 multilayer within a NC orthogonal pseudo spin-valve, for different range of magnetic fields and injected electric currents. The magnetic configuration imaged at -33 mA and 0.3 T for devices with 90 nm NC diameter reveals a structure that is within the range of current where the droplet soliton exist based on our electrical measurements and have it is consistent with the expected size of the droplet (similar to 100 nm diameter) and its spatial position within the sample. We also report the magnetisation configurations observed at lower DC currents in the presence of fields (0-50 mT), where it is expected to observe regimes of the unstable droplet formation.
|
|
| 22. |
|
|
| 23. |
- Mohseni, M., et al.
(author)
-
Chiral excitations of magnetic droplet solitons driven by their own inertia
- 2020
-
In: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 101:2
-
Journal article (peer-reviewed)abstract
- The inertial effects of magnetic solitons play a crucial role in their dynamics and stability. Yet governing their inertial effects is a challenge for their use in real devices. Here, we show how to control the inertial effects of magnetic droplet solitons. Magnetic droplets are more strongly nonlinear and localized autosolitons than can form in current-driven nanocontacts. Droplets can be considered as dynamical particles with an effective mass. We show that the dynamical droplet bears a second excitation under its own inertia. These excitations comprise a chiral profile, and appear when the droplet resists the force induced by the Oersted field of the current injected into the nanocontact. We reveal the role of the spin torque on the excitation of these chiral modes and we show how to control these modes using the current and the field.
|
|
| 24. |
- Mohseni, Seyed Morteza, et al.
(author)
-
Magnetic droplet soliton nucleation in oblique fields
- 2018
-
In: Physical Review B Condensed Matter. - : American Physical Society. - 0163-1829 .- 1095-3795. ; 97:18
-
Journal article (peer-reviewed)abstract
- We study the auto-oscillating magnetodynamics in orthogonal spin-torque nano-oscillators (STNOs) as a function of the out-of-plane (OOP) magnetic-field angle. In perpendicular fields and at OOP field angles down to approximately 50°, we observe the nucleation of a droplet. However, for field angles below 50°, experiments indicate that the droplet gives way to propagating spin waves, in agreement with our micromagnetic simulations. Theoretical calculations show that the physical mechanism behind these observations is the sign changing of spin-wave nonlinearity (SWN) by angle. In addition, we show that the presence of a strong perpendicular magnetic anisotropy free layer in the system reverses the angular dependence of the SWN and dynamics in STNOs with respect to the known behavior determined for the in-plane magnetic anisotropy free layer. Our results are of fundamental interest in understanding the rich dynamics of nanoscale solitons and spin-wave dynamics in STNOs.
|
|
| 25. |
- Mohseni, S. M., et al.
(author)
-
Magnetostatically driven domain replication in Ni/Co based perpendicular pseudo-spin-valves
- 2016
-
In: Journal of Physics D-Applied Physics. - : IOP Publishing. - 0022-3727 .- 1361-6463. ; 49:41
-
Journal article (peer-reviewed)abstract
- The effect of ferromagnetic layer thickness on the temperature-dependent stray-field-induced coupling mechanism is investigated in perpendicular pseudo-spin-valves based on [Ni/Co](5)/ Cu/Co-[Ni/Co](n) (n = 2, 3, 4, and 5). Experimental observations show that as n increases from 2 to 4, the difference in coercivity and anisotropy between the two ([Ni/Co](5) or bottom-layer, and [Ni/Co](n) or top-layer) layers increases and the room temperature coupling strength decreases. The coupling then increases for n = 5, as the coercivity difference shrinks and anisotropy decreases. At reduced temperature, the layers start to decouple at a temperature, which increases with n from 2 to 4 and decreases for n = 5 via a stray-field domain-replication mechanism. Our results are useful to control the coupling in pseudo-spin-valves for practical applications in magnetoresistive devices.
|
|
