1. |
- Abdallah, J., et al.
(author)
-
Mechanical construction and installation of the ATLAS tile calorimeter
- 2013
-
In: Journal of Instrumentation. - 1748-0221. ; 8, s. T11001-
-
Journal article (peer-reviewed)abstract
- This paper summarises the mechanical construction and installation of the Tile Calorimeter for the ATLAS experiment at the Large Hadron Collider in CERN, Switzerland. The Tile Calorimeter is a sampling calorimeter using scintillator as the sensitive detector and steel as the absorber and covers the central region of the ATLAS experiment up to pseudorapidities +/- 1.7. The mechanical construction of the Tile Calorimeter occurred over a period of about 10 years beginning in 1995 with the completion of the Technical Design Report and ending in 2006 with the installation of the final module in the ATLAS cavern. During this period approximately 2600 metric tons of steel were transformed into a laminated structure to form the absorber of the sampling calorimeter. Following instrumentation and testing, which is described elsewhere, the modules were installed in the ATLAS cavern with a remarkable accuracy for a structure of this size and weight.
|
|
2. |
- Abdallah, J., et al.
(author)
-
The optical instrumentation of the ATLAS Tile Calorimeter
- 2013
-
In: Journal of Instrumentation. - 1748-0221. ; 8, s. P01005-
-
Journal article (peer-reviewed)abstract
- The Tile Calorimeter, covering the central region of the ATLAS experiment up to pseudorapidities of +/-1.7, is a sampling device built with scintillating tiles that alternate with iron plates. The light is collected in wave-length shifting (WLS) fibers and is read out with photomultipliers. In the characteristic geometry of this calorimeter the tiles lie in planes perpendicular to the beams, resulting in a very simple and modular mechanical and optical layout. This paper focuses on the procedures applied in the optical instrumentation of the calorimeter, which involved the assembly of about 460,000 scintillator tiles and 550,000 WLS fibers. The outcome is a hadronic calorimeter that meets the ATLAS performance requirements, as shown in this paper.
|
|
3. |
- Pham, M K, et al.
(author)
-
A certified reference material for radionuclides in the water sample from Irish Sea (IAEA-443)
- 2011
-
In: JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY. - : Springer Science Business Media. - 0236-5731 .- 1588-2780. ; 288:2, s. 603-611
-
Journal article (peer-reviewed)abstract
- A new certified reference material (CRM) for radionuclides in sea water from the Irish sea (IAEA-443) is described and the results of the certification process are presented. Ten radionuclides (H-3, K-40, Sr-90, Cs-137, U-234, U-235, U-238, Pu-238, Pu239+240 and Am-241) have been certified, and information values on massic activities with 95% confidence intervals are given for four radionuclides (Th-230, Th-232, Pu-239 and Pu-240). Results for less frequently reported radionuclides (Tc-99, Th-228, Np-237 and Pu-241) are also reported. The CRM can be used for quality assurance/quality control of the analysis of radionuclides in water samples, for the development and validation of analytical methods and for training purposes. The material is available in 5 L units from IAEA (http://nucleus.iaea.org/rpst/index.htm).
|
|