| 1. |
- Lozano, Rafael, et al.
(author)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Journal article (peer-reviewed)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 2. |
- Murray, Christopher J. L., et al.
(author)
-
Population and fertility by age and sex for 195 countries and territories, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1995-2051
-
Journal article (peer-reviewed)abstract
- Background: Population estimates underpin demographic and epidemiological research and are used to track progress on numerous international indicators of health and development. To date, internationally available estimates of population and fertility, although useful, have not been produced with transparent and replicable methods and do not use standardised estimates of mortality. We present single-calendar year and single-year of age estimates of fertility and population by sex with standardised and replicable methods. Methods: We estimated population in 195 locations by single year of age and single calendar year from 1950 to 2017 with standardised and replicable methods. We based the estimates on the demographic balancing equation, with inputs of fertility, mortality, population, and migration data. Fertility data came from 7817 location-years of vital registration data, 429 surveys reporting complete birth histories, and 977 surveys and censuses reporting summary birth histories. We estimated age-specific fertility rates (ASFRs; the annual number of livebirths to women of a specified age group per 1000 women in that age group) by use of spatiotemporal Gaussian process regression and used the ASFRs to estimate total fertility rates (TFRs; the average number of children a woman would bear if she survived through the end of the reproductive age span [age 10–54 years] and experienced at each age a particular set of ASFRs observed in the year of interest). Because of sparse data, fertility at ages 10–14 years and 50–54 years was estimated from data on fertility in women aged 15–19 years and 45–49 years, through use of linear regression. Age-specific mortality data came from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 estimates. Data on population came from 1257 censuses and 761 population registry location-years and were adjusted for underenumeration and age misreporting with standard demographic methods. Migration was estimated with the GBD Bayesian demographic balancing model, after incorporating information about refugee migration into the model prior. Final population estimates used the cohort-component method of population projection, with inputs of fertility, mortality, and migration data. Population uncertainty was estimated by use of out-of-sample predictive validity testing. With these data, we estimated the trends in population by age and sex and in fertility by age between 1950 and 2017 in 195 countries and territories. Findings: From 1950 to 2017, TFRs decreased by 49·4% (95% uncertainty interval [UI] 46·4–52·0). The TFR decreased from 4·7 livebirths (4·5–4·9) to 2·4 livebirths (2·2–2·5), and the ASFR of mothers aged 10–19 years decreased from 37 livebirths (34–40) to 22 livebirths (19–24) per 1000 women. Despite reductions in the TFR, the global population has been increasing by an average of 83·8 million people per year since 1985. The global population increased by 197·2% (193·3–200·8) since 1950, from 2·6 billion (2·5–2·6) to 7·6 billion (7·4–7·9) people in 2017; much of this increase was in the proportion of the global population in south Asia and sub-Saharan Africa. The global annual rate of population growth increased between 1950 and 1964, when it peaked at 2·0%; this rate then remained nearly constant until 1970 and then decreased to 1·1% in 2017. Population growth rates in the southeast Asia, east Asia, and Oceania GBD super-region decreased from 2·5% in 1963 to 0·7% in 2017, whereas in sub-Saharan Africa, population growth rates were almost at the highest reported levels ever in 2017, when they were at 2·7%. The global average age increased from 26·6 years in 1950 to 32·1 years in 2017, and the proportion of the population that is of working age (age 15–64 years) increased from 59·9% to 65·3%. At the national level, the TFR decreased in all countries and territories between 1950 and 2017; in 2017, TFRs ranged from a low of 1·0 livebirths (95% UI 0·9–1·2) in Cyprus to a high of 7·1 livebirths (6·8–7·4) in Niger. The TFR under age 25 years (TFU25; number of livebirths expected by age 25 years for a hypothetical woman who survived the age group and was exposed to current ASFRs) in 2017 ranged from 0·08 livebirths (0·07–0·09) in South Korea to 2·4 livebirths (2·2–2·6) in Niger, and the TFR over age 30 years (TFO30; number of livebirths expected for a hypothetical woman ageing from 30 to 54 years who survived the age group and was exposed to current ASFRs) ranged from a low of 0·3 livebirths (0·3–0·4) in Puerto Rico to a high of 3·1 livebirths (3·0–3·2) in Niger. TFO30 was higher than TFU25 in 145 countries and territories in 2017. 33 countries had a negative population growth rate from 2010 to 2017, most of which were located in central, eastern, and western Europe, whereas population growth rates of more than 2·0% were seen in 33 of 46 countries in sub-Saharan Africa. In 2017, less than 65% of the national population was of working age in 12 of 34 high-income countries, and less than 50% of the national population was of working age in Mali, Chad, and Niger. Interpretation: Population trends create demographic dividends and headwinds (ie, economic benefits and detriments) that affect national economies and determine national planning needs. Although TFRs are decreasing, the global population continues to grow as mortality declines, with diverse patterns at the national level and across age groups. To our knowledge, this is the first study to provide transparent and replicable estimates of population and fertility, which can be used to inform decision making and to monitor progress. Funding: Bill & Melinda Gates Foundation.
|
|
| 3. |
- Stanaway, Jeffrey D., et al.
(author)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990-2017: A systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1923-1994
-
Journal article (peer-reviewed)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk-outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk-outcome pairs, and new data on risk exposure levels and risk- outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017.
|
|
| 4. |
- Mubeen, Iqra, et al.
(author)
-
Formulation of Modified-Release Bilayer Tablets of Atorvastatin and Ezetimibe : An In-Vitro and In-Vivo Analysis
- 2022
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 14:18
-
Journal article (peer-reviewed)abstract
- The objective of this work was to formulate co-loaded bilayer tablets containing ezetimibe (EZB) and atorvastatin (ATC). ATC loaded in the immediate-release (IR) layer is an HMG CoA reductase inhibitor, while EZB, added in the sustained-release (SR) layer, is a lipid-lowering agent. This study was conducted to evaluate the effects of polymer on the formulation and characterization of bilayer tablets, as well as the therapeutic impact of the concurrent use of both drugs having a sequential release pattern. To obtain the optimized results, four different formulations with variable compositions were developed and evaluated for different parameters. The drug release studies were carried out using a type II dissolution apparatus, using phosphate buffer solution (PBS) of 1.2 pH for IR of EZB for an initial 2 h, followed by 24 h studies for ATC in PBS 6.8 pH. The IR layer showed rapid drug release (96%) in 2 h, while 80% of the ATC was released in 24 h from the SR layer. Locally obtained, 6-week-old female albino rats were selected for in vivo studies. Both preventive and curative models were applied to check the effects of the drug combination on the lipid profile, atherosclerosis and physiology of different organs. Studies have shown that the administration of both drugs with different release patterns has a better therapeutic effect (p < 0.05), both in preventing and in curing hyperlipidemia. Conclusively, through the sequential release of ATC and EZB, a better therapeutic response could be obtained.
|
|
| 5. |
- Feigin, Valery L., et al.
(author)
-
Global, regional, and national burden of neurological disorders, 1990–2016 : a systematic analysis for the Global Burden of Disease Study 2016
- 2019
-
In: Lancet Neurology. - : Elsevier. - 1474-4422 .- 1474-4465. ; 18:5, s. 459-480
-
Journal article (peer-reviewed)abstract
- Background: Neurological disorders are increasingly recognised as major causes of death and disability worldwide. The aim of this analysis from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2016 is to provide the most comprehensive and up-to-date estimates of the global, regional, and national burden from neurological disorders.Methods: We estimated prevalence, incidence, deaths, and disability-adjusted life-years (DALYs; the sum of years of life lost [YLLs] and years lived with disability [YLDs]) by age and sex for 15 neurological disorder categories (tetanus, meningitis, encephalitis, stroke, brain and other CNS cancers, traumatic brain injury, spinal cord injury, Alzheimer's disease and other dementias, Parkinson's disease, multiple sclerosis, motor neuron diseases, idiopathic epilepsy, migraine, tension-type headache, and a residual category for other less common neurological disorders) in 195 countries from 1990 to 2016. DisMod-MR 2.1, a Bayesian meta-regression tool, was the main method of estimation of prevalence and incidence, and the Cause of Death Ensemble model (CODEm) was used for mortality estimation. We quantified the contribution of 84 risks and combinations of risk to the disease estimates for the 15 neurological disorder categories using the GBD comparative risk assessment approach.Findings: Globally, in 2016, neurological disorders were the leading cause of DALYs (276 million [95% UI 247–308]) and second leading cause of deaths (9·0 million [8·8–9·4]). The absolute number of deaths and DALYs from all neurological disorders combined increased (deaths by 39% [34–44] and DALYs by 15% [9–21]) whereas their age-standardised rates decreased (deaths by 28% [26–30] and DALYs by 27% [24–31]) between 1990 and 2016. The only neurological disorders that had a decrease in rates and absolute numbers of deaths and DALYs were tetanus, meningitis, and encephalitis. The four largest contributors of neurological DALYs were stroke (42·2% [38·6–46·1]), migraine (16·3% [11·7–20·8]), Alzheimer's and other dementias (10·4% [9·0–12·1]), and meningitis (7·9% [6·6–10·4]). For the combined neurological disorders, age-standardised DALY rates were significantly higher in males than in females (male-to-female ratio 1·12 [1·05–1·20]), but migraine, multiple sclerosis, and tension-type headache were more common and caused more burden in females, with male-to-female ratios of less than 0·7. The 84 risks quantified in GBD explain less than 10% of neurological disorder DALY burdens, except stroke, for which 88·8% (86·5–90·9) of DALYs are attributable to risk factors, and to a lesser extent Alzheimer's disease and other dementias (22·3% [11·8–35·1] of DALYs are risk attributable) and idiopathic epilepsy (14·1% [10·8–17·5] of DALYs are risk attributable).Interpretation: Globally, the burden of neurological disorders, as measured by the absolute number of DALYs, continues to increase. As populations are growing and ageing, and the prevalence of major disabling neurological disorders steeply increases with age, governments will face increasing demand for treatment, rehabilitation, and support services for neurological disorders. The scarcity of established modifiable risks for most of the neurological burden demonstrates that new knowledge is required to develop effective prevention and treatment strategies.Funding: Bill & Melinda Gates Foundation.
|
|
| 6. |
|
|
| 7. |
- Irshad, Muneeb, et al.
(author)
-
Evaluation of BaCo0.Fe-4(0).4Zr0.2-xNixO3-delta perovskite cathode using nickel as a sintering aid for IT-SOFC
- 2021
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 11:24, s. 14475-14483
-
Journal article (peer-reviewed)abstract
- In this research work, BaCo0.Fe-4(0).4Zr0.2-xNixO3-delta (x = 0, 0.01, 0.02, 0.03, 0.04) perovskite cathode material for IT-SOFC is synthesized successfully using a combustion method and sintered at low temperature. The effects of nickel as a sintering aid on the properties of BaCo0.Fe-4(0).Zr-4(0).O-2(3-delta) are investigated through different characterization methods. The addition of nickel increased the densification and grain growth at a lower sintering temperature 1200 degrees C. XRD analysis confirms a single phase of BaCo0.Fe-4(0).Zr-4(0).O-2(3-delta), and an increase in crystalline size is observed. SEM micrographs show formation of dense microstructure with increased nickel concentration. TGA analysis revealed that BaCo0.Fe-4(0).4Zr0.2-xNix cathode materials are thermally stable within the SOFC temperature range, and negligible weight loss of 2.3% is observed. The bonds of hydroxyl groups and metal oxides are confirmed for all samples through FTIR analysis. The highest electrical properties are observed for BaCo0.Fe-4(0).4Zr0.2-xNix (x = 0.04) due to increased densification and electronic defects compared to other compositions. The maximum power density of 0.47 W cm(-2) is obtained for a cell having cathode material BaCo0.Fe-4(0).4Zr0.2-xNix (x = 0.02) owing to its permeable and well-connected structure compared to others.
|
|
| 8. |
- Mehran, Muhammad Taqi, et al.
(author)
-
A comprehensive review on durability improvement of solid oxide fuel cells for commercial stationary power generation systems
- 2023
-
In: Applied Energy. - 1872-9118 .- 0306-2619. ; 352
-
Journal article (peer-reviewed)abstract
- Solid oxide fuel cells (SOFCs) are recognized as an alternative for power generation applications due to their high efficiency and environment-friendly behaviour. The electronic devices and power age could be revolutionized with the commercialization of such devices. Stationary power generation systems based on SOFCs are a step closer to commercialization due to the latest developments in the technology that promises to overcome the inherent bottleneck of high-temperature fuel cells, i.e., durability. According to the US Department of Energy (DOE), the stationary power generation system should have a lifetime of 40,000 h continuous operation. The efficiency of SOFCs is mainly dependent on their components such as anode, cathode, interconnect, and electrolyte. There are numerous factors affecting the efficiency of SOFCs that include the composition of the fuel, kinetics, and thermodynamics of the cell, and working temperature. In this paper, we have presented a comprehensive review of the recent developments to produce durable SOFCs for commercial stationary power generation systems. The review summarizes several prominent degradation mechanisms involved in the SOFC components and methods to reduce the degradation process. In addition, the methods and techniques adopted for the degradation analysis are fully demonstrated, followed by a detailed durability diagnostic through in-situ and ex-situ durability testing. The review is complemented by a lucid presentation of future research challenges and the knowledge gaps coupled with potential recommendations to fill the gaps. The new engineering designs, the material development and the new knowledge presented in this study could provide useful guidance for the key stakeholders, policymakers and power generation entities to commercially implement the application of durable SOFCs for stationary power generation.
|
|
| 9. |
- Sarfraz, Amina, et al.
(author)
-
Catalytic Effect of Silicon Carbide on the Composite Anode of Fuel Cells
- 2021
-
In: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 4:7, s. 6436-6444
-
Journal article (peer-reviewed)abstract
- High efficiency, fuel flexibility, and sustainable energy conversion make fuel cells attractive compared to conventional energy systems. The direct ethanol fuel cells have attracted much attention because of the direct utilization of ethanol fuel. Anode materials are required to enhance the catalytic activity of the liquid fuel, which oxidize the fuel at lower operating temperature. Therefore, the catalytic effect using silicon carbide has been investigated in the LiNiO2-delta anode. The material has been characterized, and it is found that SiC shows a cubic structure and LiNiO2-delta exhibits a hexagonal structure, while the LiNiO2-delta-SiC composite exhibits a mixed cubic and hexagonal phase. Scanning electron microscopy depicts that the material is porous. The Fourier transform infrared spectroscopy analysis shows the presence of Si-O-Si, Si-C, C=O, and Si-OH bonding. The LiNiO2-delta-SiC composite (1:0.3) exhibited a maximum electrical conductivity of 1.34 S cm(-1) at 650 degrees C with an electrical band gap of 0.84 eV. The fabricated cell with the LiNiO2-delta-SiC anode exhibits a power density of 0.20 W cm(-2) at 650 degrees C with liquid ethanol fuel. The results show that there is a promising catalytic activity of SiC in the fuel cell anode.
|
|
| 10. |
- Ullah, Muhammad Kaleem, et al.
(author)
-
Tri-doped ceria (M0.2Ce0.8O2-δ, M= Sm0.1 Ca0.05 Gd0.05) electrolyte for hydrogen and ethanol-based fuel cells
- 2019
-
In: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388. ; 773, s. 548-554
-
Journal article (peer-reviewed)abstract
- In recent scientific research, an interest has been gained significantly by rare earth metals such as cerium (Ce), samarium (Sm) and gadolinium (Gd) due to their use in fuel cells as electrolyte and catalysts. When used in an electrolyte, these materials lower the fuel cell's operating temperature compared to a conventional electrolyte, for example, yittria-stabilized zirconia (YSZ) which operates at a high temperature (≥800 °C). In this paper, the tri-doped ceria, M0.2Ce0.8O2-δ(M = Sm0.1Ca0.05Gd0.05) electrolyte powders was synthesized using the co-precipitation method at 80 °C. These dopants were used for CeO2with a total molar ratio of 1 M. Dry-pressed powder technique was used to make fuel cell pellets from the powder and placed them in the furnace to sinter at 700 °C for 60 min. Electrical conductivity of such a pellet in air was 1.2 × 10−2S cm−1at 700 °C measured by the ProboStat-NorECs setup. The crystal structure was determined with the help of X-ray diffraction (XRD), which showed that all the dopants were successfully doped in CeO2. Raman spectroscopy and UV-VIS spectroscopy were also carried out to analyse the molecular vibrations and absorbance, respectively. The maximum open-circuit voltages (OCVs) for hydrogen and ethanol fuelled at 550 °C were observed to be 0.89 V and 0.71 V with power densities 314 mW cm−2and 52.8 mW cm−2, respectively.
|
|
| 11. |
- Zheng, Xiaoxiao, et al.
(author)
-
Graphene-Oxide-Based Fluoro- and Chromo-Genic Materials and Their Applications
- 2022
-
In: Molecules. - : MDPI AG. - 1431-5157 .- 1420-3049. ; 27:6
-
Journal article (peer-reviewed)abstract
- Composite materials and their applications constitute a hot field of research nowadays due to the fact that they comprise a combination of the unique properties of each component of which they consist. Very often, they exhibit better performance and properties compared to their combined building blocks. Graphene oxide (GO), as the most widely used derivative of graphene, has attracted widespread attention because of its excellent properties. Abundant oxygen-containing functional groups on GO can provide various reactive sites for chemical modification or functionalization of GO, which in turn can be used to develop novel GO-based composites. This review outlines the most recent advances in the field of novel dyes and pigments encompassing GO as a key ingredient or as an important cofactor. The interactions of graphene with other materials/compounds are highlighted. The special structure and unique properties of GO have a great effect on the performance of fabricated hybrid dyes and pigments by enhancing the color performance of dyes, the anticorrosion properties of pigments, the viscosity and rheology of inks, etc., which further expands the applications of dyes and pigments in dyeing, optical elements, solar-thermal energy storage, sensing, coatings, and microelectronics devices. Finally, challenges in the current development as well as the future prospects of GO-based dyes and pigments are also discussed. This review provides a reference for the further exploration of novel dyes and pigments.
|
|
| 12. |
- Abdal, Noman, et al.
(author)
-
Salinity mitigates cadmium-induced phytotoxicity in quinoa (Chenopodium quinoa Willd.) by limiting the Cd uptake and improved responses to oxidative stress : implications for phytoremediation
- 2023
-
In: Environmental Geochemistry and Health. - : Springer Science and Business Media LLC. - 0269-4042 .- 1573-2983. ; 45:1, s. 171-185
-
Journal article (peer-reviewed)abstract
- Cadmium (Cd) contamination and soil salinity are the main environmental issues reducing crop productivity. This study aimed to examine the combined effects of salinity (NaCl) and Cd on the physiological and biochemical attributes of quinoa (Chenopodium quinoa Willd.). For this purpose, 30-day-old plants of quinoa genotype “Puno” were transplanted in Hoagland's nutrient solution containing diverse concentrations of Cd: 0, 50, 100, 200 µM Cd, and salinity: 0, 150, and 300 mM NaCl. Results demonstrated that plant growth, stomatal conductance, and pigment contents were significantly lower at all Cd concentrations than the control plants. Quinoa plants exhibited improved growth and tolerance against Cd when grown at a lower level of salinity (150 mM NaCl) combined with Cd. In contrast, the elevated concentration of salinity (300 mM NaCl) combined with Cd reduced shoot and root growth of experimental plants more than 50%. Combined application of salinity and Cd increased Na (25-fold), while lessened the Cd (twofold) and K (1.5-fold) uptake. A blend of high concentrations of Na and Cd caused overproduction of H2O2 (eightfold higher than control) contents and triggered lipid peroxidation. The activities of antioxidant enzymes: ascorbate peroxidase (APX), catalase (CAT), peroxidase (POD), and superoxide dismutase (SOD) were 13, 12, 7 and ninefold higher than control to mitigate the oxidative stress. Due to restricted root to shoot translocation, and greater tolerance potential against Cd, the quinoa genotype, Puno, is suitable for phytostabilization of Cd in saline soils.
|
|
| 13. |
- Afroz, Laila, et al.
(author)
-
Nanocomposite Catalyst (1 – x)NiO-xCuO/yGDC for Biogas Fueled Solid Oxide Fuel Cells
- 2023
-
In: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 6:21, s. 10918-10928
-
Journal article (peer-reviewed)abstract
- The composites of Ni–Cu oxides with gadolinium doped ceria (GDC) are emerging as highly proficient anode catalysts, owing to their remarkable performance for solid oxide fuel cells operated with biogas. In this context, the nanocomposite catalysts (1 – x)NiO-xCuO/yGDC (x = 0.2–0.8; y = 1,1.3) are synthesized using a solid-state reaction route. The cubic and monoclinic structures are observed for NiO and CuO phases, respectively, while CeO2 showed cubic fluorite structure. The scanning electron microscopic images revealed a rise in the particle size with an increase in the copper and GDC concentration. The optical band gap values are calculated in the range 2.82–2.33 eV from UV–visible analysis. The Raman spectra confirmed the presence of vibration modes of CeO2 and NiO. The electrical conductivity of the nanocomposite anodes is increased as the concentration of copper and GDC increased and reached at 9.48 S cm–1 for 0.2NiO-0.8CuO/1.3GDC composition at 650 °C. The electrochemical performance of (1 – x)NiO-xCuO/yGDC (x = 0.2–0.8; y = 1,1.3)-based fuel cells is investigated with biogas fuel at 650 °C. Among all of the as-synthesized anodes, the fuel cell with composition 0.2NiO-0.8CuO/1.3GDC showed the best performance, such as an open circuit voltage of 0.84 V and peak power density of 72 mW cm–2. However, from these findings, it can be inferred that among all other compositions, the 0.2NiO-0.8CuO/1.3GDC anode is a superior combination for the high electrochemical performance of solid oxide fuel cells fueled with biogas.
|
|
| 14. |
- Akbar, Muhammad, et al.
(author)
-
Effect of sintering temperature on properties of LiNiCuZn-Oxide: a potential anode for solid oxide fuel cell
- 2019
-
In: Materials Research Express. - : IOP PUBLISHING LTD. - 2053-1591. ; 6:10
-
Journal article (peer-reviewed)abstract
- Crystal structure and surface morphology play vital role in the performance of Solid Oxide Fuel cells (SOFCs) anode. Sufficient electrocatalytic activity and high conductivity are the key requirements for anode to enhance the electrochemical capability. In current work, sintering temperature effects are investigated on the properties of advanced LiNiCuZn-Oxide based electrode for solid oxide fuel cells (SOFCs). The powders were prepared by simple solid-state reaction method was followed by sintering at different temperatures (700 degrees C-1200 degrees C). Moreover, various characterization techniques have been employed to investigate the sintering temperatures effects on the crystallite size, morphology, particle size, energy band gap and absorption peaks. The energy gap (Eg) was observed to increase from 2.94 eV to 3.32 eV and dc conductivity decreased from 9.084 Scm(-1) to 0.46 Scm(-1) by increasing sintering temperature from 700 degrees C to 1200 degrees C. Additionally, the best fuel cell performance of 0.90 Wcm(-2) was achieved for LiNiCuZn-Oxide sintered at 700 degrees C using H-2/air as a fuel and oxidant and it decreased to 0.17 Wcm(-2) for powders sintered at 1200 degrees C. Based on these results, we can conclude that 700 degrees C is the best optimum temperature for these chemical compositions, where all parameters of electrode are as per SOFCs requirement.
|
|
| 15. |
|
|
| 16. |
- Ali, Amjad, et al.
(author)
-
Electrochemical study of composite materials for coal-based direct carbon fuel cell
- 2018
-
In: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 43:28, s. 12900-12908
-
Journal article (peer-reviewed)abstract
- The efficient conversion of solid carbon fuels into energy by reducing the emission of harmful gases is important for clean environment. In this regards, direct carbon fuel cell (DCFC) is a system that converts solid carbon directly into electrical energy with high thermodynamic efficiency (100%), system efficiency of 80% and half emission of gases compared to conventional coal power plants. This can generate electricity from any carbonaceous fuel such as charcoal, carbon black, carbon fiber, graphite, lignite, bituminous coal and waste materials. In this paper, ternary carbonate-samarium doped ceria (LNK-SDC) electrolyte has been synthesized via co-precipitation technique, while LiNi-CuZnFeO (LNCZFO) electrode has been prepared using solid state reaction method. Due to significant ionic conductivity of electrolyte LNK-SDC, it is used in DCFC. Three types of solid carbon (lignite, bituminous, sub-bituminous) are used as fuel to generate power. The X-ray diffraction confirmed the cubic crystalline structure of samarium doped ceria, whereas XRD pattern of LNCZFO showed its composite structure. The proximate and ultimate coal analysis showed that fuel (carbon) with higher carbon content and lower ash content was promising fuel for DCFC. The measured ionic conductivity of LNK-SDC is 0.0998 Scm(-1) and electronic conductivity of LNCZFO is 10.1 Scm(-1) at 700 degrees C, respectively. A maximum power density of 58 mWcm(-2) is obtained using sub bituminous fuel.
|
|
| 17. |
- Ali, Amjad, et al.
(author)
-
Promising electrochemical study of titanate based anodes in direct carbon fuel cell using walnut and almond shells biochar fuel
- 2019
-
In: Journal of Power Sources. - : ELSEVIER. - 0378-7753 .- 1873-2755. ; 434
-
Journal article (peer-reviewed)abstract
- The direct carbon fuel cell (DCFC) is an efficient device that converts the carbon fuel directly into electricity with 100% theoretical efficiency contrary to practical efficiency around 60%. In this paper four perovskite anode materials La0.4Sr0.6M0.09Ti0.91O3-delta (M = Ni, Fe, Co, Zn) have been prepared using sol-gel technique to measure the performance of the device using solid fuel. These materials have shown reasonable stability and conductivity at 700 degrees C. Further structural analysis of as-prepared anode material using XRD technique reveals a single cubic perovskite structure with average crystallite size roughly 47 nm. Walnut and almond shells biochar have also been examined as a fuel in DCFC at the temperature range 400-700 degrees C. In addition, Elemental analysis of walnut and almond shells has shown high carbon content and low nitrogen and sulfur contents in the obtained biochar. Subsequently, the superior stability of as-prepared anode materials is evident by thermogravimetric analysis in pure N-2 gas atmosphere. Conversely, the LSFT anode has shown the highest electronic conductivity of 7.53Scm(-1) at 700 degrees C. The obtained power density for LSFTO3-delta composite anode mixed in sub-bituminous coal, walnut and almond shells biochar is of 68, 55, 48 mWcm(-2) respectively. A significant improvement in performance of DCFC (78 mWcm(-2)) was achieved.
|
|
| 18. |
- Feigin, Valery L, et al.
(author)
-
Global, Regional, and Country-Specific Lifetime Risks of Stroke, 1990 and 2016.
- 2018
-
In: The New England journal of medicine. - 1533-4406 .- 0028-4793. ; 379:25, s. 2429-2437
-
Journal article (peer-reviewed)abstract
- The lifetime risk of stroke has been calculated in a limited number of selected populations. We sought to estimate the lifetime risk of stroke at the regional, country, and global level using data from a comprehensive study of the prevalence of major diseases.We used the Global Burden of Disease (GBD) Study 2016 estimates of stroke incidence and the competing risks of death from any cause other than stroke to calculate the cumulative lifetime risks of first stroke, ischemic stroke, or hemorrhagic stroke among adults 25 years of age or older. Estimates of the lifetime risks in the years 1990 and 2016 were compared. Countries were categorized into quintiles of the sociodemographic index (SDI) used in the GBD Study, and the risks were compared across quintiles. Comparisons were made with the use of point estimates and uncertainty intervals representing the 2.5th and 97.5th percentiles around the estimate.The estimated global lifetime risk of stroke from the age of 25 years onward was 24.9% (95% uncertainty interval, 23.5 to 26.2); the risk among men was 24.7% (95% uncertainty interval, 23.3 to 26.0), and the risk among women was 25.1% (95% uncertainty interval, 23.7 to 26.5). The risk of ischemic stroke was 18.3%, and the risk of hemorrhagic stroke was 8.2%. In high-SDI, high-middle-SDI, and low-SDI countries, the estimated lifetime risk of stroke was 23.5%, 31.1% (highest risk), and 13.2% (lowest risk), respectively; the 95% uncertainty intervals did not overlap between these categories. The highest estimated lifetime risks of stroke according to GBD region were in East Asia (38.8%), Central Europe (31.7%), and Eastern Europe (31.6%), and the lowest risk was in eastern sub-Saharan Africa (11.8%). The mean global lifetime risk of stroke increased from 22.8% in 1990 to 24.9% in 2016, a relative increase of 8.9% (95% uncertainty interval, 6.2 to 11.5); the competing risk of death from any cause other than stroke was considered in this calculation.In 2016, the global lifetime risk of stroke from the age of 25 years onward was approximately 25% among both men and women. There was geographic variation in the lifetime risk of stroke, with the highest risks in East Asia, Central Europe, and Eastern Europe. (Funded by the Bill and Melinda Gates Foundation.).
|
|
| 19. |
- Irshad, Muneeb, et al.
(author)
-
Evaluation of BaZr0.8X0.2 (X= Y, Gd, Sm) proton conducting electrolytes sintered at low temperature for IT-SOFC synthesized by cost effective combustion method
- 2020
-
In: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 815
-
Journal article (peer-reviewed)abstract
- In present work, perovskite structured proton conducting electrolyte materials BaZr0.8Y0.2 (BZY), BaZr0.8Gd0.2 (BZGd) and BaZr0.8Sm0.2 (BZSm) synthesized by cost effective combustion method are investigated for intermediate temperature solid oxide fuel cell (IT-SOFC). The synthesized BZY, BZGd and BZSm materials are sintered at low temperature (1150 degrees C) and the effect of low sintering temperature on electrolyte properties are also explored. Microstructure, surface morphology, elemental composition, functional group and weight loss are studied using different characterization techniques like XRD, SEM, EDX, FTIR and TGA. XRD shows cubic perovskite structure of all synthesized materials. Secondary phase of Y2O3 is observed in BZY while BaO is observed in BZGd and BZSm due to low sintering temperature. SEM micrographs reveals dense microstructure of BZSm compared to BZY and BZGd. EDX analysis confirms the required material composition within all samples with no impurities. FTIR shows the presence of hydroxyl group and metal oxides and it is observed that BZY exhibit more structural symmetry compared to BZSm and BZGd. Highest conductivity observed (2.2 x 10(-3) S/cm) for BZY due to its structural symmetry and characteristic to prefer B-site of perovskite. Also significant power densities of 0.34 Wcm(-2), 0.24 Wcm(-2) and 0.32 Wcm(-2) for BZY, BZGd and BZSm electrolytes based cells at 650 degrees C implies that BZY, BZGd and BZSm can be used as IT-SOFC electrolytes. (C) 2019 Elsevier B.V. All rights reserved.
|
|
| 20. |
- Irshad, Muneeb, et al.
(author)
-
Evaluation of densification effects on the properties of 8 mol % yttria stabilized zirconia electrolyte synthesized by cost effective coprecipitation route
- 2021
-
In: Ceramics International. - : ELSEVIER SCI LTD. - 0272-8842 .- 1873-3956. ; 47:2, s. 2857-2863
-
Journal article (peer-reviewed)abstract
- In the current work, properties of 8YSZ powder synthesized by co-precipitation method and sintered at 1200 degrees C, 1300 degrees C and 1400 degrees C are investigated. XRD analysis shows that all 8YSZ samples exhibit cubic phase and increased crystallite size is observed with increased sintering temperature. The relative density measurements show increased densification due to increased sintering temperature and relative density >96% is obtained for 8YSZ sintered at 1400 degrees C. SEM micrographs also confirm that structure becomes denser with increase in sintering temperature. EDX analysis confirms the elemental composition of 8YSZ and no impurity is observed while thermal analysis reveals weight losses within different temperature ranges. High ionic conductivity and maximum power density of 0.41 Wcm(-2) is obtained for cell having 8YSZ electrolyte sintered at 1400 degrees C owing to its compact, dense and gas tight microstructure.
|
|
| 21. |
- Javed, Muhammad Sufyan, et al.
(author)
-
Electrochemical studies of perovskite cathode material for direct natural gas fuel cell
- 2016
-
In: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 41:4, s. 3072-3078
-
Journal article (peer-reviewed)abstract
- Natural gas is the most promising renewable energy source and its widespread availability ensured its importance for early applications in stationary fuel cells as a reliable and low cost fuel. Therefore it is very important to efficiently utilization of natural gas in low temperature fuel cells. Herein, we demonstrate the synthesis of perovskite material of Yttrium doped Sr0.92FexTi1-xO3-delta (x = 0.25, 030) (YSFT) by solid state reaction method and further investigated as a new cathode material for a low temperature solid oxide fuel cell fueled by natural gas. The YSFT is characterized by X-ray powder diffraction, Brunauer-Emmett-Teller and scanning electron microscopy. The perovskite structure is achieved at relatively low temperature (850 degrees C). The average crystalline size is found 28 nm and 36 nm for x = 0.25 and 0.30 respectively. TGA results showed the lattice oxygen loss of YSFT is about 0.206% in its original weight in the temperature range of 25-1000 degrees C. The maximum electronic conductivities of 2.3 Scm(-1) and 2.07 Scm(-1) are achieved for x = 025 and x = 0.30 at 550 degrees C in air atmosphere respectively. It is observed that the oxygen reduction is enhanced due to the perovskite crystal structure and oxygen vacancies play an important role in the redox reaction to improve the performance of fuel cell. The YSFT perovskite cathode material based fuel cell with natural gas have achieved the power density of 250 mWcm(-2) for x = 025 at 550 degrees C. The fuel cell device has demonstrated very stable results by running continuously for 5 h with domestic available natural gas.
|
|
| 22. |
- Rafique, Asia, et al.
(author)
-
Multioxide phase-based nanocomposite electrolyte (M@SDC where M = Zn2+ / Ba2+/ La2+/Zr-2/Al3+) materials
- 2020
-
In: Ceramics International. - : ELSEVIER SCI LTD. - 0272-8842 .- 1873-3956. ; 46:52, s. 6882-6888
-
Journal article (peer-reviewed)abstract
- This paper deals with the development of a highly dense and stable electrolyte on the base of nanoionics oxide interface theory. This gives a comparative study of two-phase nanocomposite electrolytes that are developed for low temperature solid oxide fuel cells (LT-SOFCs). These nanocomposites are synthesised with different oxides, which are coated on the doped ceria that showed high oxide ion mobility for LT-SOFCs. These novel two-phase nanocomposite oxide ionic conductors (MCe0.8Sm0.2O2-MO2, where M = Zn2+/Ba2+/La3+/Zr2+/Al3+) were synthesised by a co-precipitation method. The interface study between these two phases was analysed by electrochemical impedance spectroscopy (EIS), while ionic conductivities were measured with DC conductivity (four probe method). The nanocomposite electrolytes exhibited higher conductivities with the increase of concentration of coated oxides but decreased at a certain level. The structural or morphological properties of the nanocomposite electrolytes were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The thermal stability was investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The maximum performance of 590 mW/cm(2) at 550 degrees C was obtained for the Zn@SDC based cell, and the rest of the coated samples Ba@SDC, La@SDC, Zr@SDC and Al@SDC based cells showed values of 550 mW/cm(2), 540 mW/cm(2), 450 mW/cm(2), 340 mW/cm(2), respectively, with hydrogen as a fuel. Therefore, the coated-SDC based nanocomposite materials are a good approach for lowering the operating temperature to achieve the challenges of the solid oxide fuel cells (SOFC). These two-phase nanocomposite electrolytes satisfy the all requirements which one electrolyte should have, like high ionic conduction, thermodynamic stability and negligible electronic conduction.
|
|
| 23. |
- Zafar, Waqar Ali, et al.
(author)
-
Time series subsidence evaluation using NSBAS InSAR: a case study of twin megacities (Rawalpindi and Islamabad) in Pakistan
- 2024
-
In: Frontiers in Earth Science. - : Frontiers Media SA. - 2296-6463. ; 12
-
Journal article (peer-reviewed)abstract
- Ground deformation associated with natural and anthropogenic activities can be damaging for infrastructure and can cause enormous economic loss, particularly in developing countries which lack measuring instruments. Remote sensing techniques like interferometric synthetic aperture radar (InSAR) can thus play an important role in investigating deformation and mitigating geohazards. Rawalpindi and Islamabad are twin cities in Pakistan with a population of approximately 5.4 million, along with important government and private entities of national and international interest. In this study, we evaluate rapid paced subsidence in this area using a modified small baseline subset technique with Sentinel-1A imagery acquired between 2015 and 2022. Our results show that approximately 50 mm/year subsidence occurs in the older city of Rawalpindi, the most populated zone. We observed that subsidence in the area is controlled by the buried splays of the Main Boundary Thrust, one of the most destructive active faults in the recent past. We suggest that such rapid subsidence is most probably due to aggressive subsurface water extraction. It has been found that, despite provision of alternate water supplies by the district government, a very alarming number of tube wells are being operated in the area to extract ground water. Over 2017–2021, field data showed that near-surface aquifers up to 50–60 m deep are exhausted, and most of the tube wells are currently extracting water from depths of approximately 150–160 m. The dropping water level is proportional to the increasing number of tube wells. Lying downstream of tributaries originating from the Margalla and Murree hills, this area has a good monsoon season, and its topography supports recharge of the aquifers. However, rapid subsidence indicates a deficit between water extraction and recharge, partly due to the limitations inherent in shale and the low porosity near the surface lithology exposed in the area. Other factors amplifying the impacts are fast urbanization, uncontrolled population growth, and non-cultivation of precipitation in the area.
|
|
| 24. |
- Abid, Rabia, et al.
(author)
-
An optimised homomorphic CRT-RSA algorithm for secure and efficient communication
- 2023
-
In: Personal and Ubiquitous Computing. - : Springer. - 1617-4909 .- 1617-4917. ; 27, s. 1405-1418
-
Journal article (peer-reviewed)abstract
- Secure and reliable exchange of information between devices is crucial for any network in the current digital world. This information is maintained on storage devices, routing devices, and communication over the cloud. Cryptographic techniques are used to ensure the secure transmission of data, ensuring the user’s privacy by storing and transmitting data in a particular format. Using encryption, only the intended user possessing the key can access the information. During data or essential transmission, the channel should be secured by using robust encryption techniques. Homomorphic Encryption (HE) techniques have been used in the past for this purpose. However, one of the flaws of the conventional HE is seen either in its slow transmission or fast key decryption. Thus, this paper proposes an optimized Homomorphic Encryption Chinese Remainder Theorem with a Rivest-Shamir-Adleman (HE-CRT-RSA) algorithm to overcome this challenge. The proposed Technique, HE-CRT-RSA, utilizes multiple keys for efficient communication and security. In addition, the performance of the HE-CRT-RSA algorithm was evaluated in comparison with the classical RSA algorithm. The result of the proposed algorithm shows performance improvement with reduced decryption time. It is observed that the proposed HE-CRT-RSA is 3–4% faster than the classical Rivest-Shamir-Adleman (RSA). The result also suggests that HE-CRT-RSA effectively enhances security issues of the cloud and helps to decrease the involvement of intruders or any third party during communication or inside the data/server centers.
|
|
| 25. |
- Afzal, Muhammad, et al.
(author)
-
Analysis of a perovskite-ceria functional layer-based solid oxide fuel cell
- 2017
-
In: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 42:27, s. 17536-17543
-
Journal article (peer-reviewed)abstract
- A fuel cell based on a functional layer of perovskite Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) composited samarium doped ceria (SDC) has been developed. The device achieves a peak power density of 640.4 mW cm(-2) with an open circuit voltage (OCV) of 1.04 Vat 560 degrees C using hydrogen and air as the fuel and oxidant, respectively. A numerical model is applied to fit the experimental cell voltage. The kinetics of anodic and cathodic reactions are modeled based on the measurements obtained by electrochemical impedance spectroscopy (EIS). Modeling results are in well agreement with the experimental data. Mechanical stability of the cell is also examined by using analysis with field emission scanning electron microscope (FESEM) associated with energy dispersive spectroscopy (EDS) after testing the cell performance.
|
|
