1. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
|
|
3. |
- Brownstein, Catherine A., et al.
(author)
-
An international effort towards developing standards for best practices in analysis, interpretation and reporting of clinical genome sequencing results in the CLARITY Challenge
- 2014
-
In: Genome Biology. - : Springer Science and Business Media LLC. - 1465-6906 .- 1474-760X. ; 15:3, s. R53-
-
Journal article (peer-reviewed)abstract
- Background: There is tremendous potential for genome sequencing to improve clinical diagnosis and care once it becomes routinely accessible, but this will require formalizing research methods into clinical best practices in the areas of sequence data generation, analysis, interpretation and reporting. The CLARITY Challenge was designed to spur convergence in methods for diagnosing genetic disease starting from clinical case history and genome sequencing data. DNA samples were obtained from three families with heritable genetic disorders and genomic sequence data were donated by sequencing platform vendors. The challenge was to analyze and interpret these data with the goals of identifying disease-causing variants and reporting the findings in a clinically useful format. Participating contestant groups were solicited broadly, and an independent panel of judges evaluated their performance. Results: A total of 30 international groups were engaged. The entries reveal a general convergence of practices on most elements of the analysis and interpretation process. However, even given this commonality of approach, only two groups identified the consensus candidate variants in all disease cases, demonstrating a need for consistent fine-tuning of the generally accepted methods. There was greater diversity of the final clinical report content and in the patient consenting process, demonstrating that these areas require additional exploration and standardization. Conclusions: The CLARITY Challenge provides a comprehensive assessment of current practices for using genome sequencing to diagnose and report genetic diseases. There is remarkable convergence in bioinformatic techniques, but medical interpretation and reporting are areas that require further development by many groups.
|
|
4. |
- Forouzanfar, Mohammad H, et al.
(author)
-
Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks in 188 countries, 1990-2013 : a systematic analysis for the Global Burden of Disease Study 2013.
- 2015
-
In: The Lancet. - 0140-6736 .- 1474-547X. ; 386:10010, s. 2287-2323
-
Journal article (peer-reviewed)abstract
- BACKGROUND: The Global Burden of Disease, Injuries, and Risk Factor study 2013 (GBD 2013) is the first of a series of annual updates of the GBD. Risk factor quantification, particularly of modifiable risk factors, can help to identify emerging threats to population health and opportunities for prevention. The GBD 2013 provides a timely opportunity to update the comparative risk assessment with new data for exposure, relative risks, and evidence on the appropriate counterfactual risk distribution.METHODS: Attributable deaths, years of life lost, years lived with disability, and disability-adjusted life-years (DALYs) have been estimated for 79 risks or clusters of risks using the GBD 2010 methods. Risk-outcome pairs meeting explicit evidence criteria were assessed for 188 countries for the period 1990-2013 by age and sex using three inputs: risk exposure, relative risks, and the theoretical minimum risk exposure level (TMREL). Risks are organised into a hierarchy with blocks of behavioural, environmental and occupational, and metabolic risks at the first level of the hierarchy. The next level in the hierarchy includes nine clusters of related risks and two individual risks, with more detail provided at levels 3 and 4 of the hierarchy. Compared with GBD 2010, six new risk factors have been added: handwashing practices, occupational exposure to trichloroethylene, childhood wasting, childhood stunting, unsafe sex, and low glomerular filtration rate. For most risks, data for exposure were synthesised with a Bayesian meta-regression method, DisMod-MR 2.0, or spatial-temporal Gaussian process regression. Relative risks were based on meta-regressions of published cohort and intervention studies. Attributable burden for clusters of risks and all risks combined took into account evidence on the mediation of some risks such as high body-mass index (BMI) through other risks such as high systolic blood pressure and high cholesterol.FINDINGS: All risks combined account for 57·2% (95% uncertainty interval [UI] 55·8-58·5) of deaths and 41·6% (40·1-43·0) of DALYs. Risks quantified account for 87·9% (86·5-89·3) of cardiovascular disease DALYs, ranging to a low of 0% for neonatal disorders and neglected tropical diseases and malaria. In terms of global DALYs in 2013, six risks or clusters of risks each caused more than 5% of DALYs: dietary risks accounting for 11·3 million deaths and 241·4 million DALYs, high systolic blood pressure for 10·4 million deaths and 208·1 million DALYs, child and maternal malnutrition for 1·7 million deaths and 176·9 million DALYs, tobacco smoke for 6·1 million deaths and 143·5 million DALYs, air pollution for 5·5 million deaths and 141·5 million DALYs, and high BMI for 4·4 million deaths and 134·0 million DALYs. Risk factor patterns vary across regions and countries and with time. In sub-Saharan Africa, the leading risk factors are child and maternal malnutrition, unsafe sex, and unsafe water, sanitation, and handwashing. In women, in nearly all countries in the Americas, north Africa, and the Middle East, and in many other high-income countries, high BMI is the leading risk factor, with high systolic blood pressure as the leading risk in most of Central and Eastern Europe and south and east Asia. For men, high systolic blood pressure or tobacco use are the leading risks in nearly all high-income countries, in north Africa and the Middle East, Europe, and Asia. For men and women, unsafe sex is the leading risk in a corridor from Kenya to South Africa.INTERPRETATION: Behavioural, environmental and occupational, and metabolic risks can explain half of global mortality and more than one-third of global DALYs providing many opportunities for prevention. Of the larger risks, the attributable burden of high BMI has increased in the past 23 years. In view of the prominence of behavioural risk factors, behavioural and social science research on interventions for these risks should be strengthened. Many prevention and primary care policy options are available now to act on key risks.FUNDING: Bill & Melinda Gates Foundation.
|
|
5. |
- Fu, Qiliang, 1986-, et al.
(author)
-
Transparent plywood as a load-bearing and luminescent biocomposite
- 2018
-
In: Composites Science And Technology. - : Elsevier. - 0266-3538 .- 1879-1050. ; 164, s. 296-303
-
Journal article (peer-reviewed)abstract
- Transparent wood (TW) structures in research studies were either thin and highly anisotropic or thick and isotropic but weak. Here, transparent plywood (TPW) laminates are investigated as load-bearing biocomposites with tunable mechanical and optical performances. Structure-property relationships are analyzed. The plies of TPW were laminated with controlled fiber directions and predetermined stacking sequence in order to control the directional dependence of modulus and strength, which would give improved properties in the weakest direction. Also, the angular dependent light scattering intensities were investigated and showed more uniform distribution. Luminescent TPW was prepared by incorporation of quantum dots (QDs) for potential lighting applications. TPW can be designed for large-scale use where multiaxial load-bearing performance is combined with new optical functionalities.
|
|
6. |
|
|
7. |
- Kassebaum, Nicholas J., et al.
(author)
-
Global, regional, and national disability-adjusted life-years (DALYs) for 315 diseases and injuries and healthy life expectancy (HALE), 1990-2015 : a systematic analysis for the Global Burden of Disease Study 2015
- 2016
-
In: The Lancet. - 0140-6736 .- 1474-547X. ; 388:10053, s. 1603-1658
-
Journal article (peer-reviewed)abstract
- Background Healthy life expectancy (HALE) and disability-adjusted life-years (DALYs) provide summary measures of health across geographies and time that can inform assessments of epidemiological patterns and health system performance, help to prioritise investments in research and development, and monitor progress toward the Sustainable Development Goals (SDGs). We aimed to provide updated HALE and DALYs for geographies worldwide and evaluate how disease burden changes with development. Methods We used results from the Global Burden of Diseases, Injuries, and Risk Factors Study 2015 (GBD 2015) for all-cause mortality, cause-specific mortality, and non-fatal disease burden to derive HALE and DALYs by sex for 195 countries and territories from 1990 to 2015. We calculated DALYs by summing years of life lost (YLLs) and years of life lived with disability (YLDs) for each geography, age group, sex, and year. We estimated HALE using the Sullivan method, which draws from age-specific death rates and YLDs per capita. We then assessed how observed levels of DALYs and HALE differed from expected trends calculated with the Socio-demographic Index (SDI), a composite indicator constructed from measures of income per capita, average years of schooling, and total fertility rate. Findings Total global DALYs remained largely unchanged from 1990 to 2015, with decreases in communicable, neonatal, maternal, and nutritional (Group 1) disease DALYs off set by increased DALYs due to non-communicable diseases (NCDs). Much of this epidemiological transition was caused by changes in population growth and ageing, but it was accelerated by widespread improvements in SDI that also correlated strongly with the increasing importance of NCDs. Both total DALYs and age-standardised DALY rates due to most Group 1 causes significantly decreased by 2015, and although total burden climbed for the majority of NCDs, age-standardised DALY rates due to NCDs declined. Nonetheless, age-standardised DALY rates due to several high-burden NCDs (including osteoarthritis, drug use disorders, depression, diabetes, congenital birth defects, and skin, oral, and sense organ diseases) either increased or remained unchanged, leading to increases in their relative ranking in many geographies. From 2005 to 2015, HALE at birth increased by an average of 2.9 years (95% uncertainty interval 2.9-3.0) for men and 3.5 years (3.4-3.7) for women, while HALE at age 65 years improved by 0.85 years (0.78-0.92) and 1.2 years (1.1-1.3), respectively. Rising SDI was associated with consistently higher HALE and a somewhat smaller proportion of life spent with functional health loss; however, rising SDI was related to increases in total disability. Many countries and territories in central America and eastern sub-Saharan Africa had increasingly lower rates of disease burden than expected given their SDI. At the same time, a subset of geographies recorded a growing gap between observed and expected levels of DALYs, a trend driven mainly by rising burden due to war, interpersonal violence, and various NCDs. Interpretation Health is improving globally, but this means more populations are spending more time with functional health loss, an absolute expansion of morbidity. The proportion of life spent in ill health decreases somewhat with increasing SDI, a relative compression of morbidity, which supports continued efforts to elevate personal income, improve education, and limit fertility. Our analysis of DALYs and HALE and their relationship to SDI represents a robust framework on which to benchmark geography-specific health performance and SDG progress. Country-specific drivers of disease burden, particularly for causes with higher-than-expected DALYs, should inform financial and research investments, prevention efforts, health policies, and health system improvement initiatives for all countries along the development continuum.
|
|
8. |
- Li, Yuanyuan, et al.
(författare)
-
Towards centimeter thick transparent wood through interface manipulation
- 2018
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 6:3, s. 1094-1101
-
Tidskriftsartikel (refereegranskat)abstract
- Transparent wood is an attractive structural material for energy-saving buildings due to its high optical transmittance, good thermal insulation, and high toughness. However, thick highly transparent wood is challenging to realize. In the current work, highly transparent wood (1.5 mm) with a transmittance of 92%, close to that of pure PMMA (95%), is demonstrated. The high transmittance was realized by interface manipulation through acetylation of wood template. Both experiments and electromagnetic modeling support that the improved transmittance is mainly due to elimination of interface debonding gap. By applying this method, a centimeter-thick transparent wood structure was obtained. The transparent wood could be used as a substrate for an optically tunable window by laminating a polymer dispersed liquid crystal (PDLC) film on top. The techniques demonstrated are a step towards the replacement of glass in smart windows and smart buildings.
|
|
9. |
- Lobov, Gleb S., et al.
(författare)
-
Electric field induced optical anisotropy of P3HT nanofibers in a liquid solution
- 2015
-
Ingår i: Optical Materials Express. - : Optical Society of America. - 2159-3930. ; 5:11, s. 2642-2647
-
Tidskriftsartikel (refereegranskat)abstract
- The nanofiber morphology of regioregular Poly-3- hexylthiophene (P3HT) is a 1D crystalline structure organized by π - π stacking of the backbone chains. In this study, we report the impact of electric field on the orientation and optical properties of P3HT nanofibers dispersed in liquid solution. We demonstrate that alternating electric field aligns nanofibers, whereas static electric field forces them to migrate towards the cathode. The alignment of nanofibers introduces anisotropic optical properties, which can be dynamically manipulated until the solvent has evaporated. Time resolved spectroscopic measurements revealed that the electro-optical response time decreases significantly with the magnitude of applied electric field. Thus, for electric field 1.3 V ·μm-1 the response time was measured as low as 20 ms, while for 0.65 V ·μm-1 it was 110-150 ms. Observed phenomenon is the first mention of P3HT supramolecules associated with electrooptical effect. Proposed method provides real time control over the orientation of nanofibers, which is a starting point for a novel practical implementation. With further development P3HT nanofibers can be used individually as an anisotropic solution or as an active component in a guest-host system.
|
|
10. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
11. |
- Soltanmoradi, Reyhaneh, et al.
(författare)
-
Multi-resonator structure based on continuous silver thin films for transparent conductors
- 2014
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 105:6, s. 061110-
-
Tidskriftsartikel (refereegranskat)abstract
- A type of metal-dielectric multilayered structures is investigated theoretically and experimentally for achieving optical transparency with a high electrical conductivity. The structure in our demonstrated case comprises of two coupled metal-dielectric-metal planar optical resonators with metal-layer thicknesses near to its skin depth. Simulations show that the maximum transmittance for visible light can easily reach 90% for silver-based structures. Experimentally, the sample fabricated exhibits a transmission window with a bandwidth of 150 nm and a maximum transmittance of 76% around 643 nm wavelength at normal incidence. Its sheet resistance is measured to be less than 10 Omega/square, much smaller than that of common indium-tin-oxide films. Transparent conductors functioning for blue light and even for the whole visible light are also shown to be theoretically possible. Owing to their simple fabrication procedure as well as design flexibility, such a layered structure can serve as a compelling alternative as transparent conductors for optoelectronic devices, especially for liquid-crystal displays and light-emitting diodes.
|
|
12. |
- Yu, X., et al.
(författare)
-
Coupling coefficient of two-core microstructured optical fiber
- 2006
-
Ingår i: Optics Communications. - : Elsevier. - 0030-4018 .- 1873-0310. ; 260:1, s. 164-169
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, coupled-mode theory is applied to a two-core microstructured optical fiber for the first time to calculate the coupling coefficients for different fiber structures by employing a simple effective index model approach. The dependence of the mode coupling properties upon the geometrical parameters of the two-core structures (air-hole arrangement, hole size, and pitch size) and wavelength are evaluated systematically. The effective index coupled-mode theory is compared with the finite-element method based super-mode theory in details and the results show good agreement. The coupling characteristics are proven to be insensitive to the longitudinal strain by considering the photoelastic effects.
|
|
13. |
- Andersson, Jennie, 1986, et al.
(författare)
-
Ship-scale CFD benchmark study of a pre-swirl duct on KVLCC2
- 2022
-
Ingår i: Applied Ocean Research. - : Elsevier Ltd. - 0141-1187 .- 1879-1549. ; 123
-
Tidskriftsartikel (refereegranskat)abstract
- Installing an energy saving device such as a pre-swirl duct (PSD) is a major investment for a ship owner and prior to an order a reliable prediction of the energy savings is required. Currently there is no standard for how such a prediction is to be carried out, possible alternatives are both model-scale tests in towing tanks with associated scaling procedures, as well as methods based on computational fluid dynamics (CFD). This paper summarizes a CFD benchmark study comparing industrial state-of-the-art ship-scale CFD predictions of the power reduction through installation of a PSD, where the objective was to both obtain an indication on the reliability in this kind of prediction and to gain insight into how the computational procedure affects the results. It is a blind study, the KVLCC2, which the PSD is mounted on, has never been built and hence there is no ship-scale data available. The 10 participants conducted in total 22 different predictions of the power reduction with respect to a baseline case without PSD. The predicted power reductions are both positive and negative, on average 0.4%, with a standard deviation of 1.6%-units, when not considering two predictions based on model-scale CFD and two outliers associated with large uncertainties in the results. Among the variations present in computational procedure, two were found to significantly influence the predictions. First, a geometrically resolved propeller model applying sliding mesh interfaces is in average predicting a higher power reduction with the PSD compared to simplified propeller models. The second factor with notable influence on the power reduction prediction is the wake field prediction, which, besides numerical configuration, is affected by how hull roughness is considered. © 2022 The Authors
|
|
14. |
- Barber, R. M., et al.
(författare)
-
Healthcare Access and Quality Index based on mortality from causes amenable to personal health care in 195 countries and territories, 1990-2015: a novel analysis from the Global Burden of Disease Study 2015
- 2017
-
Ingår i: Lancet. - : Elsevier BV. - 0140-6736. ; 390:10091, s. 231-266
-
Tidskriftsartikel (refereegranskat)abstract
- Background National levels of personal health-care access and quality can be approximated by measuring mortality rates from causes that should not be fatal in the presence of effective medical care (ie, amenable mortality). Previous analyses of mortality amenable to health care only focused on high-income countries and faced several methodological challenges. In the present analysis, we use the highly standardised cause of death and risk factor estimates generated through the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) to improve and expand the quantification of personal health-care access and quality for 195 countries and territories from 1990 to 2015. Methods We mapped the most widely used list of causes amenable to personal health care developed by Nolte and McKee to 32 GBD causes. We accounted for variations in cause of death certification and misclassifications through the extensive data standardisation processes and redistribution algorithms developed for GBD. To isolate the effects of personal health-care access and quality, we risk-standardised cause-specific mortality rates for each geography-year by removing the joint effects of local environmental and behavioural risks, and adding back the global levels of risk exposure as estimated for GBD 2015. We employed principal component analysis to create a single, interpretable summary measure-the Healthcare Quality and Access (HAQ) Index-on a scale of 0 to 100. The HAQ Index showed strong convergence validity as compared with other health-system indicators, including health expenditure per capita (r= 0.88), an index of 11 universal health coverage interventions (r= 0.83), and human resources for health per 1000 (r= 0.77). We used free disposal hull analysis with bootstrapping to produce a frontier based on the relationship between the HAQ Index and the Socio-demographic Index (SDI), a measure of overall development consisting of income per capita, average years of education, and total fertility rates. This frontier allowed us to better quantify the maximum levels of personal health-care access and quality achieved across the development spectrum, and pinpoint geographies where gaps between observed and potential levels have narrowed or widened over time. Findings Between 1990 and 2015, nearly all countries and territories saw their HAQ Index values improve; nonetheless, the difference between the highest and lowest observed HAQ Index was larger in 2015 than in 1990, ranging from 28.6 to 94.6. Of 195 geographies, 167 had statistically significant increases in HAQ Index levels since 1990, with South Korea, Turkey, Peru, China, and the Maldives recording among the largest gains by 2015. Performance on the HAQ Index and individual causes showed distinct patterns by region and level of development, yet substantial heterogeneities emerged for several causes, including cancers in highest-SDI countries; chronic kidney disease, diabetes, diarrhoeal diseases, and lower respiratory infections among middle-SDI countries; and measles and tetanus among lowest-SDI countries. While the global HAQ Index average rose from 40.7 (95% uncertainty interval, 39.0-42.8) in 1990 to 53.7 (52.2-55.4) in 2015, far less progress occurred in narrowing the gap between observed HAQ Index values and maximum levels achieved; at the global level, the difference between the observed and frontier HAQ Index only decreased from 21.2 in 1990 to 20.1 in 2015. If every country and territory had achieved the highest observed HAQ Index by their corresponding level of SDI, the global average would have been 73.8 in 2015. Several countries, particularly in eastern and western sub-Saharan Africa, reached HAQ Index values similar to or beyond their development levels, whereas others, namely in southern sub-Saharan Africa, the Middle East, and south Asia, lagged behind what geographies of similar development attained between 1990 and 2015. Interpretation This novel extension of the GBD Study shows the untapped potential for personal health-care access and quality improvement across the development spectrum. Amid substantive advances in personal health care at the national level, heterogeneous patterns for individual causes in given countries or territories suggest that few places have consistently achieved optimal health-care access and quality across health-system functions and therapeutic areas. This is especially evident in middle-SDI countries, many of which have recently undergone or are currently experiencing epidemiological transitions. The HAQ Index, if paired with other measures of health-systemcharacteristics such as intervention coverage, could provide a robust avenue for tracking progress on universal health coverage and identifying local priorities for strengthening personal health-care quality and access throughout the world. Copyright (C) The Author(s). Published by Elsevier Ltd.
|
|
15. |
- Chen, Hui
(författare)
-
Light Scattering Effects in Transparent Wood Biocomposites
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Transparent wood (TW) shows interesting optical properties and offers a sustainable alternative to petroleum-based polymer glasses. The influence of the TW internal structure (e.g. fiber alignment, volume fraction of cellulose, lignin content, defects from preparation process) on the optical properties is poorly understood, which limits its use in various applications. It is also true for transparent cellulose biocomposites in general. In this thesis, eco-friendly TW biocomposites are investigated. The work focuses on experimental characterization, structure-optical property relationships and possibilities to quantify such relationships. TWs made of delignified wood substrates with longitudinal direction of the tree parallel to the specimen surface are prepared. Relationships between anisotropic scattering and fiber alignment are studied by scattering angle measurement. Anisotropic photons distributions are compared between two fiber directions and various sample thicknesses. Next, attenuation coefficients (related to the anisotropic diffusion coefficients and absorption coefficient) for TWs are obtained by combining the photon diffusion equation with total transmittance measurements. The results indicate strong influence from the air gaps between wood substrate phase and polymer in the lumen pores on the scattering. Beside the airgaps between wood substrate and polymer, refractive index mismatch between polymer and wood substrate strongly influences the scattering. Thus, immersion liquid method (based on the total transmittance measurement) combined with a light transmission model (based on Fresnel reflection theory) is applied to estimate the refractive index of the delignified wood substrate. This facilitates TW design (i.e. the proper polymer selection for various applications) and modelling of the optical properties of delignified wood based transparent materials. Finally, extinction coefficients, Rayleigh scattering and absorption coefficients of TW are extracted from photon budget measurements combined with a light diffusion model developed. With higher volume fraction of cellulose, all these parameters are increased, although polymer-cellulose refractive index mismatch is the dominating factor controlling transmittance. The strong forward scattering in TW is analysed, and Rayleigh scattering has a strong effect on haze. The influence of lignin content on the absorption coefficient is also discussed.
|
|
16. |
- Chen, Hui, et al.
(författare)
-
Refractive index of delignified wood for transparent biocomposites
- 2020
-
Ingår i: RSC Advances. - 2046-2069. ; 10, s. 40719-40724
-
Tidskriftsartikel (refereegranskat)abstract
- Refractive index (RI) determination for delignified wood templates is vital for transparent wood composite fabrication. Reported RIs in the literature are based on either single plant fibers or wood powder, measured by the immersion liquid method (ILM) combined with mathematical fitting. However, wood structure complexity and the physical background of the fitting were not considered. In this work, RIs of delignified wood templates were measured by the ILM combined with a light transmission model developed from the Fresnel reflection/refraction theory for composite materials. The RIs of delignified balsa wood are 1.536 ± 0.006 and 1.525 ± 0.008 at the wavelength of 589 nm for light propagating perpendicular and parallel to the wood fiber direction, respectively. For delignified birch wood, corresponding values are 1.537 ± 0.005 and 1.529 ± 0.006, respectively. The RI data for delignified wood scaffolds are important for tailoring optical properties of transparent wood biocomposites, and also vital in optical properties investigations by theoretical modelling of complex light propagation in transparent wood and related composites. The developed light transmission model in combination with the immersion liquid method can be used to determine the RI of complex porous or layered solid materials and composites.
|
|
17. |
- Chen, Hui, et al.
(författare)
-
Refractive index of delignified wood for transparent biocomposites
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:67, s. 40719-40724
-
Tidskriftsartikel (refereegranskat)abstract
- Refractive index (RI) determination for delignified wood templates is vital for transparent wood composite fabrication. Reported RIs in the literature are based on either single plant fibers or wood powder, measured by the immersion liquid method (ILM) combined with mathematical fitting. However, wood structure complexity and the physical background of the fitting were not considered. In this work, RIs of delignified wood templates were measured by the ILM combined with a light transmission model developed from the Fresnel reflection/refraction theory for composite materials. The RIs of delignified balsa wood are 1.536 ± 0.006 and 1.525 ± 0.008 at the wavelength of 589 nm for light propagating perpendicular and parallel to the wood fiber direction, respectively. For delignified birch wood, corresponding values are 1.537 ± 0.005 and 1.529 ± 0.006, respectively. The RI data for delignified wood scaffolds are important for tailoring optical properties of transparent wood biocomposites, and also vital in optical properties investigations by theoretical modelling of complex light propagation in transparent wood and related composites. The developed light transmission model in combination with the immersion liquid method can be used to determine the RI of complex porous or layered solid materials and composites.
|
|
18. |
- Chen, Hui, et al.
(författare)
-
Thickness Dependence of Optical Transmittance of Transparent Wood : Chemical Modification Effects
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:38, s. 35451-35457
-
Tidskriftsartikel (refereegranskat)abstract
- Transparent wood (TW) is an emerging optical material combining high optical transmittance and haze for structural applications. Unlike nonscattering absorbing media, the thickness dependence of light transmittance for TW is complicated because optical losses are also related to increased photon path length from multiple scattering. In the present study, starting from photon diffusion equation, it is found that the angle-integrated total light transmittance of TW has an exponentially decaying dependence on sample thickness. The expression reveals an attenuation coefficient which depends not only on the absorption coefficient but also on the diffusion coefficient. The total transmittance and thickness were measured for a range of TW samples, from both acetylated and nonacetylated balsa wood templates, and were fitted according to the derived relationship. The fitting gives a lower attenuation coefficient for the acetylated TW compared to the nonacetylated one. The lower attenuation coefficient for the acetylated TW is attributed to its lower scattering coefficient or correspondingly lower haze. The attenuation constant resulted from our model hence can serve as a singular material parameter that facilitates cross-comparison of different sample types, at even different thicknesses, when total optical transmittance is concerned. The model was verified with two other TWs (ash and birch) and is in general applicable to other scattering media.
|
|
19. |
- Chuan Chen, Max, et al.
(författare)
-
Low temperature activation of B implantation of Si subcell fabrication in III-V/Si tandem solar cells
- 2019
-
Ingår i: Proceedings of the 36<sup>th</sup> EU PVSEC 2019. - : WIP. - 3936338604 ; , s. 764-768
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this work, we investigated the Si pre-amorphization implantation (PAI) assisted low temperatureannealing process to activate boron implantation in n-Si in a hydride vapor phase epitaxy (HVPE) reactor, which canbe used for the Si subcell fabrication in the III-V/Si tandem solar cells enabled by the corrugated epitaxial lateralovergrowth (CELOG). A uniform boron activation in Si and a low emitter sheet resistance of 77 /sq was obtained atannealing temperatures of 600-700°C. High-resolution x-ray diffraction was used to study the recrystallization ofamorphous silicon and the incorporation of boron dopants in Si. Hall measurements revealed p-type carrierconcentrations in the order of 1020 cm-3. The n-Si wafers with B implantation activated at 700°C by HVPE wereprocessed to solar cells and characterized by the standard light-current-voltage measurement under AM1.5 spectrumand external quantum efficiency measurements. The developed B implantation and low temperature activationprocesses are applied to the InP/Si seed template preparation for CELOG, on which CELOG GaInP over a Si subcellwith a direct heterojunction was demonstrated.
|
|
20. |
- Dai, J., et al.
(författare)
-
Enhanced near-field radiative heat transfer between corrugated metal plates : role of spoof surface plasmon polaritons
- 2015
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 92:3
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate with the finite-difference time-domain method that radiative heat transfer between two parallel gold plates can be significantly enhanced by engraving periodic grooves with a subwavelength width on the plate surfaces. The enhancement increases with a decrease in the separation distance at near-field regime and it can be further efficiently improved by having a supercell with multiple grooves with different depths. We attribute this near-field enhancement to coupling of thermally excited spoof surface plasmon polaritons, a type of artificial surface wave inherent to structured metal surfaces [J. B. Pendry, L. Mart´ın-Moreno, and F. J. Garcia-Vidal, Science 305, 847 (2004)]. The frequency-dependent contribution to the heat transfer, or transmission-factor spectrum, is confirmed by calculating the dispersion relation of guided modes by the two parallel corrugated plates through a finite-element method. Especially, the photonic density of states derived from the dispersion relation is found to have excellent agreement to the transmission-factor spectrum.
|
|
21. |
- Dyakov, S. A., et al.
(författare)
-
Thermal radiation dynamics in two parallel plates : the role of near field
- 2014
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 90:4
-
Tidskriftsartikel (refereegranskat)abstract
- The temperature dynamics of the radiative heat propagation in a multilayer structure is theoretically treated with a formalism combining the scattering matrix and Green's-functions methods. The time evolution of the temperature of parallel plates of silicon carbide in vacuum is simulated for different interplate distances and thicknesses of plates. The characteristic radiative heat exchange time and temperature of the plates at stationary state are determined from the time evolutions. The threshold interplate distance which separates heating and cooling regimes for the sink plate is found. We show that the variation of the interplate distance allows us to control the relaxation processes in the system of absorber and emitter.
|
|
22. |
- Ebadi, Seyed Morteza, et al.
(författare)
-
A Highly-Efficiency NIR Plasmonic Long-Wavelength Cut-Off Filter based on Stepped Impedance Resonators
- 2021
-
Ingår i: Optics InfoBase Conference Papers. - Washington, D.C. : Optica Publishing Group (formerly OSA). ; , s. 1-2
-
Konferensbidrag (refereegranskat)abstract
- We report design and simulation results of a high-efficiency long-wavelength cut-off filter realized by stepped impedance resonators. Moreover, numerical results confirm by modulating the length of resonator, cut-off wavelength can be easily tuned.
|
|
23. |
- Ebadi, Seyed Morteza
(författare)
-
Design and Numerical Modelling of Nanoplasmonic Structures at Near-Infrared for Telecom Applications
- 2022
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Industrial innovation is mostly driven by miniaturization. As a result of remarkable technological advancements in the fields of equipment, materials and production processes, transistor, the fundamental active component in conventional electronics, has shrunk in size. Semiconductor technology is unique in that all performance metrics are enhanced, while at the same time unit prices are reduced. Moore’s Law, which predicts that the number of components per chip will double every two years, was established in 1965, and the industry has been able to keep up with this prophetic prognosis since. Thermal management, on the other hand, has become a key limiting factor for current electronic circuits and is set to put a stop to Moore’s Law. Given the fact that complementary metal oxide semiconductor (CMOS) scaling is reaching fundamental limits, there are several new alternative processing devices and architectures that have been investigated for both traditional integrated circuit (IC) technologies and novel technologies, including new technologies aimed at contributing to advances in scaling progress and cost reductions in manufacturing operations in the coming decades. These factors will encourage the development of new information processing and memory systems, new technologies for integrating numerous features heterogeneously and new system architectural design layouts, among other things. Energy efficiency is advantageous from a sustainability perspective and for consumer electronics, for which fewer power-hungry components mean longer times between charges and smaller batteries. The creation of novel chip-scale tools that can aid in the transfer of information across optical frequencies and microscale photonics between nanoscale electronic devices is now a possibility. Bridging this technological gap may be achieved by plasmonics. The incorporation of plasmonic, photonic and electrical components on a single chip may lead to a number of innovative breakthroughs. Photonic integrated circuits (PICs) enable the realization of ultra-small, high-efficiency, ultra-responsive and CMOS-compatible devices that can be used in applications ranging from optical wireless communication systems (6G and beyond) and supercomputers to health and energy. This thesis provides a platform from which to design nanoplasmonic devices while facilitating high-transmission and/or absorption efficiency, miniaturized size and the use of near-infrared (NIR) wavelengths for telecom applications. With a significant amount of Internet traffic transmitted optically, communication systems are further tightening the requirements for the development of new optical devices. Several new device structures based on the metal-insulator-metal (MIM) plasmonic waveguide are proposed and investigated using performance metrics. The transmission line theory (TLM) from microwave circuit theory and coupled mode theory (CMT) is studied and employed in the design process of the nanostructures, in particular to address the losses in plasmonic-based devices, which has been the major factor hampering their widespread usage in communication systems. By taking advantage of well-established microwave circuit theory (through new design that paves the way for mitigating these losses and enabling efficient transmission of power flow in the optical devices), we have suggested a number of high-transmission efficiency nanodevices that offer highly competitive performance compared with other platforms. As a result, a promising future for plasmonic technology, which would enable design and fabrication of multipurpose and multifunctional optical devices that are efficient in terms of losses, footprint and capability of integrating active devices, is anticipated.
|
|
24. |
- Fischer, Hubertus, et al.
(författare)
-
Palaeoclimate constraints on the impact of 2 °C anthropogenic warming and beyond
- 2018
-
Ingår i: Nature Geoscience. - : Springer Science and Business Media LLC. - 1752-0894 .- 1752-0908. ; 11:7, s. 474-485
-
Tidskriftsartikel (refereegranskat)abstract
- Over the past 3.5 million years, there have been several intervals when climate conditions were warmer than during the pre-industrial Holocene. Although past intervals of warming were forced differently than future anthropogenic change, such periods can provide insights into potential future climate impacts and ecosystem feedbacks, especially over centennial-to-millennial timescales that are often not covered by climate model simulations. Our observation-based synthesis of the understanding of past intervals with temperatures within the range of projected future warming suggests that there is a low risk of runaway greenhouse gas feedbacks for global warming of no more than 2 °C. However, substantial regional environmental impacts can occur. A global average warming of 1–2 °C with strong polar amplification has, in the past, been accompanied by significant shifts in climate zones and the spatial distribution of land and ocean ecosystems. Sustained warming at this level has also led to substantial reductions of the Greenland and Antarctic ice sheets, with sea-level increases of at least several metres on millennial timescales. Comparison of palaeo observations with climate model results suggests that, due to the lack of certain feedback processes, model-based climate projections may underestimate long-term warming in response to future radiative forcing by as much as a factor of two, and thus may also underestimate centennial-to-millennial-scale sea-level rise.
|
|
25. |
- Fullman, N., et al.
(författare)
-
Measuring performance on the Healthcare Access and Quality Index for 195 countries and territories and selected subnational locations: a systematic analysis from the Global Burden of Disease Study 2016
- 2018
-
Ingår i: Lancet. - : Elsevier BV. - 0140-6736. ; 391:10136, s. 2236-2271
-
Tidskriftsartikel (refereegranskat)abstract
- Background A key component of achieving universal health coverage is ensuring that all populations have access to quality health care. Examining where gains have occurred or progress has faltered across and within countries is crucial to guiding decisions and strategies for future improvement. We used the Global Burden of Diseases, Injuries, and Risk Factors Study 2016 (GBD 2016) to assess personal health-care access and quality with the Healthcare Access and Quality (HAQ) Index for 195 countries and territories, as well as subnational locations in seven countries, from 1990 to 2016. Methods Drawing from established methods and updated estimates from GBD 2016, we used 32 causes from which death should not occur in the presence of effective care to approximate personal health-care access and quality by location and over time. To better isolate potential effects of personal health-care access and quality from underlying risk factor patterns, we risk-standardised cause-specific deaths due to non-cancers by location-year, replacing the local joint exposure of environmental and behavioural risks with the global level of exposure. Supported by the expansion of cancer registry data in GBD 2016, we used mortality-to-incidence ratios for cancers instead of risk-standardised death rates to provide a stronger signal of the effects of personal health care and access on cancer survival. We transformed each cause to a scale of 0-100, with 0 as the first percentile (worst) observed between 1990 and 2016, and 100 as the 99th percentile (best); we set these thresholds at the country level, and then applied them to subnational locations. We applied a principal components analysis to construct the HAQ Index using all scaled cause values, providing an overall score of 0-100 of personal health-care access and quality by location over time. We then compared HAQ Index levels and trends by quintiles on the Socio-demographic Index (SDI), a summary measure of overall development. As derived from the broader GBD study and other data sources, we examined relationships between national HAQ Index scores and potential correlates of performance, such as total health spending per capita. Findings In 2016, HAQ Index performance spanned from a high of 97.1 (95% UI 95.8-98.1) in Iceland, followed by 96.6 (94.9-97.9) in Norway and 96.1 (94.5-97.3) in the Netherlands, to values as low as 18.6 (13.1-24.4) in the Central African Republic, 19.0 (14.3-23.7) in Somalia, and 23.4 (20.2-26.8) in Guinea-Bissau. The pace of progress achieved between 1990 and 2016 varied, with markedly faster improvements occurring between 2000 and 2016 for many countries in sub-Saharan Africa and southeast Asia, whereas several countries in Latin America and elsewhere saw progress stagnate after experiencing considerable advances in the HAQ Index between 1990 and 2000. Striking subnational disparities emerged in personal health-care access and quality, with China and India having particularly large gaps between locations with the highest and lowest scores in 2016. In China, performance ranged from 91.5 (89.1-936) in Beijing to 48.0 (43.4-53.2) in Tibet (a 43.5-point difference), while India saw a 30.8-point disparity, from 64.8 (59.6-68.8) in Goa to 34.0 (30.3-38.1) in Assam. Japan recorded the smallest range in subnational HAQ performance in 2016 (a 4.8-point difference), whereas differences between subnational locations with the highest and lowest HAQ Index values were more than two times as high for the USA and three times as high for England. State-level gaps in the HAQ Index in Mexico somewhat narrowed from 1990 to 2016 (from a 20.9-point to 17.0-point difference), whereas in Brazil, disparities slightly increased across states during this time (a 17.2-point to 20.4-point difference). Performance on the HAQ Index showed strong linkages to overall development, with high and high-middle SDI countries generally having higher scores and faster gains for non-communicable diseases. Nonetheless, countries across the development spectrum saw substantial gains in some key health service areas from 2000 to 2016, most notably vaccine-preventable diseases. Overall, national performance on the HAQ Index was positively associated with higher levels of total health spending per capita, as well as health systems inputs, but these relationships were quite heterogeneous, particularly among low-to-middle SDI countries. Interpretation GBD 2016 provides a more detailed understanding of past success and current challenges in improving personal health-care access and quality worldwide. Despite substantial gains since 2000, many low-SDI and middle-SDI countries face considerable challenges unless heightened policy action and investments focus on advancing access to and quality of health care across key health services, especially non-communicable diseases. Stagnating or minimal improvements experienced by several low-middle to high-middle SDI countries could reflect the complexities of re-orienting both primary and secondary health-care services beyond the more limited foci of the Millennium Development Goals. Alongside initiatives to strengthen public health programmes, the pursuit of universal health coverage upon improving both access and quality worldwide, and thus requires adopting a more comprehensive view and subsequent provision of quality health care for all populations. Copyright (C) 2018 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|