| 1. |
|
|
| 2. |
-
INNOTRACK: Concluding technical report
- 2010
-
Editorial collection (peer-reviewed)abstract
- The track structure, rails, switches and crossings account for more than 50% of maintenance and renewal costs for the rail industry. To improve the competitiveness of rail transportation, the cost-efficiency of these areas needs to be addressed.This the background to INNOTRACK, an integrated research project funded by the European Commission’s 6th research framework pro- gramme. Running from September 2006 to December 2009, INN- OTRACK has developed a multitude of innovative solutions in the areas of track substructure, rails & welds, and switches & crossings. The solutions have been assessed from technical, logistics and life cycle cost point of views.This Concluding Technical Report of INNOTRACK includes an overview of the project. It further details implementable results, and clusters them into ”highlight” areas. In addition, the book acts as a ”key” to the vast amount of information from INNOTRACK: All sections refer to project reports where more information can be found.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Stylidis, Kostas, 1978, et al.
(author)
-
Perceived quality framework in product generation engineering: an automotive industry example
- 2019
-
In: Design Science. - : Cambridge University Press (CUP). - 2053-4701 .- 2053-4701. ; 5
-
Journal article (peer-reviewed)abstract
- Perceived quality refers to customers’ cognitive and emotional responses to a particular design, often also associated with craftsmanship and customer satisfaction. Previous research defined a taxonomy of perceived quality and provided understanding about how engineering design decisions impact customer satisfaction. Furthermore, development of new products is frequently based on carrying over attributes of existing products, either from the same producer or from competitors. Previous research offered a new product development methodology combining variations of subsystems to carry over from existing products. This brief presents how these two lines of research combined to design the central console of the Porsche Panamera automobile and discusses the opportunities and challenges posed in the practical implementation of this research.
|
|
| 6. |
- Nybacka, Mikael, et al.
(author)
-
Project: CASTT - Centre for Automotive Systems Technologies and Testing
- 2007
-
Other publication (pop. science, debate, etc.)abstract
- Through the Centre for Automotive Systems Technologies and Testing, Luleå University of Technology aims to first of all support automotive winter testing in Northern Sweden. This means to support the local automotive test entrepreneurs and through them their customers: the car manufacturers and their suppliers. To succeed in this task, the center relies on the university's areas of leading research and most importantly on the cooperation between those areas.
|
|
| 7. |
- Heshmati, Mohsen, 1987, et al.
(author)
-
Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy
- 2017
-
In: Materials and Design. - : Elsevier BV. - 1873-4197 .- 0264-1275. ; 122, s. 433-447
-
Journal article (peer-reviewed)abstract
- In recent years, adhesive bonding has found its way to construction applications such as bridges. Given the harsh conditions that such structures are usually exposed to, it is necessary to account for environmental factors, particularly moisture and temperature, in the design phase. Cohesive zone modelling has attracted much attention in the last decade as a promising method to design adhesive joints. Despite this interest, the effects of moisture and thermal cycles on cohesive laws have not been investigated to the knowledge of the authors. In this paper, we present a method to directly measure the environmental-dependent cohesive laws of a structural adhesive loaded in pure Mode-I and Mode-II. Special consideration is given to overcome issues such as the time-consuming nature of moisture ingression and specimen dimensions, which could be problematic due to the size-limitations of conditioning equipment. The accuracy of this method was verified through simulation of the experiments using the finite element analysis. The effects of exposure to 95% relative humidity, immersion in saltwater and distilled water, and freeze-thaw cycles in the presence or absence of moisture were investigated. The results indicate the damaging effects of combined saltwater and freeze-thaw cycles which were clearly reflected on the shape of the cohesive laws.
|
|
| 8. |
- Eriksson, Sören, 1953-
(author)
-
China's aircraft industry: collaboration and technology transfer - the case of Airbus
- 2010
-
In: International Journal of Technology Transfer and Commercialisation (IJTTC). - : Inderscience Enterprises Ltd. - 1470-6075 .- 1741-5284. ; 9:4, s. 306-325
-
Journal article (peer-reviewed)abstract
- China has moved a long way in economic and industrial development during the last decades and has developed into a global player in many industries. With increased knowledge in high-technology industries, China has ambitions to move into sectors that necessitate a high level of research and development, such as the aerospace industry. China is now in the process of establishing a modern aircraft industry based on domestic efforts as well as agreements with foreign partners in the manufacturing of complete aircraft. This paper analyzes what measures have been taken by Airbus in the form of technology transfer and other supportive measures to strengthen its position in the Chinese market. The findings conclude that Airbus’ transfer should be looked upon as a broad spectrum of technology and knowledge transfer, which include aircraft manufacturing technology, as well as cabin crew training centre, establishment of a warehouse and suppliers ”village”, an engineering centre, maintenance and various service functions.
|
|
| 9. |
- Chen, Zhe, et al.
(author)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Journal article (peer-reviewed)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
| 10. |
- Skagestad, Ragnhild, 1978, et al.
(author)
-
GCCSI Webinar: Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview & first results for partial CO2 capture at integrated steelworks
- 2017
-
Other publication (other academic/artistic)abstract
- GCCSI Webinar: Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview & first results for partial CO2 capture at integrated steelworks This publication has the format of a webinar: The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more information here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2 emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations. The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries. The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were discussed, demonstrating the viability of partial capture in an integrated steelworks.
|
|
| 11. |
- Liu, Yuanhua, 1971, et al.
(author)
-
Considering the importance of user profiles in interface design
- 2009
-
In: User Interfaces. ; , s. 23-
-
Book chapter (other academic/artistic)abstract
- User profile is a popular term widely employed during product design processes by industrial companies. Such a profile is normally intended to represent real users of a product. The ultimate purpose of a user profile is actually to help designers to recognize or learn about the real user by presenting them with a description of a real user’s attributes, for instance; the user’s gender, age, educational level, attitude, technical needs and skill level. The aim of this chapter is to provide information on the current knowledge and research about user profile issues, as well as to emphasize the importance of considering these issues in interface design. In this chapter, we mainly focus on how users’ difference in expertise affects their performance or activity in various interaction contexts. Considering the complex interaction situations in practice, novice and expert users’ interactions with medical user interfaces of different technical complexity will be analyzed as examples: one focuses on novice and expert users’ difference when interacting with simple medical interfaces, and the other focuses on differences when interacting with complex medical interfaces. Four issues will be analyzed and discussed: (1) how novice and expert users differ in terms of performance during the interaction; (2) how novice and expert users differ in the perspective of cognitive mental models during the interaction; (3) how novice and expert users should be defined in practice; and (4) what are the main differences between novice and expert users’ implications for interface design. Besides describing the effect of users’ expertise difference during the interface design process, we will also pinpoint some potential problems for the research on interface design, as well as some future challenges that academic researchers and industrial engineers should face in practice.
|
|
| 12. |
- Esmaeili, Ali, 1983, et al.
(author)
-
Modelling of temperature and strain rate dependent behaviour of pearlitic steel in block braked railway wheels
- 2021
-
In: Railway Engineering Science. - : Springer. - 2662-4745 .- 2662-4753. ; 29:4, s. 362-378
-
Journal article (peer-reviewed)abstract
- Block braked railway wheels are subjected to thermal and rolling contact loading. The thermal loading results in high temperatures and thermal stresses which cause slow time dependent processes such as creep, relaxation and static recovery of the wheel material. At the same time, the rolling contact loading implies a very fast mechanical load application. This paper is focused on material modeling of pearlitic steel for a wide range of loading rates at elevated temperatures. The starting point is a viscoplasticity model including nonlinear isotropic and kinematic hardening. The Delobelle overstress function is employed to capture strain rate dependent response of the material. The model also includes static recovery of the hardening to capture slower viscous (diffusion dominated) behaviour of the material. Experiments for the pearlitic wheel steel ER7 in terms of cyclic strain-controlled uniaxial tests with hold-time, uniaxial ratchetting tests including rapid cycles and biaxial cyclic tests with tension/compression and torsion are used to calibrate the material model. These experiments were performed under isothermal conditions at different temperatures. In the ratchetting tests, higher loading rates are obtained and these have been used to calibrate the high strain rate response of the viscoplasticity model. The paper is concluded with a numerical example of a block braked wheel where the importance of accounting for the viscoplasticity in modelling is highlighted.
|
|
| 13. |
- Binder, Christian, 1988-, et al.
(author)
-
Phosphor Thermometry for In-Cylinder Surface Temperature Measurements in Diesel Engines
- 2019
-
In: Measurement science and technology. - 0957-0233 .- 1361-6501.
-
Journal article (other academic/artistic)abstract
- Surface temperature measurements in technically relevant applications can be very hallenging and yet of great importance. Phosphor thermometry is a temperature measurement technique that has previously been employed in technically relevant applications to obtain surface temperature. The technique is based on temperature-dependent changes in a phosphor’s luminescence. To improve the accuracy and precision of temperature measurements with this technique, the present study considers, by way of example, the impact of conditions inside the cylinder of a diesel engine on decay time based phosphor thermometry. After an initial, general assessment of the effect of prevailing measurement conditions, this research investigates errors caused by soot luminosity, extinction, signal trapping and changes of phosphors’ luminescence properties due to exposure to the harsh environment. Furthermore, preferable properties of phosphors which are suitable for in-cylinder temperature measurements are discussed. 16 phosphors are evaluated, including four which – to the authors’ knowledge –have previously not been used in thermometry. Results indicate that errors due to photocathode bleaching, extinction, signal trapping and changes of luminescence properties may cause an erroneous temperature evaluation with temperature errors in the order of serval tens of Kelvin.
|
|
| 14. |
- Hosseini Bab Anari, Elham, 1982, et al.
(author)
-
Fluorine-free salts for aqueous lithium-ion and sodium-ion battery electrolytes
- 2016
-
In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:88, s. 6, 85194-85201
-
Journal article (peer-reviewed)abstract
- A first generation of fluorine-free lithium and sodium salts based on the concept of pseudo-delocalized anions has been synthesized with both high purity and yield using water as the solvent in the reaction medium. The salts have been fully characterized by Raman and FT-IR spectroscopies, thermogravimetry, and X-ray crystallography to reveal both basic properties in terms of thermal stability and solubility as well as the local, mainly ion–ion interaction dictated, coordination details and by ionic conductivity and electrochemical stability window measurements as aqueous electrolytes. Together a picture is created of the salts' promise as components in electrolytes – primarily aiming at application in low voltage fluorinefree aqueous lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs).
|
|
| 15. |
- Stylidis, Kostas, 1978, et al.
(author)
-
Perceived quality of products: a framework and attributes ranking method
- 2020
-
In: Journal of Engineering Design. - : Informa UK Limited. - 1466-1837 .- 0954-4828. ; 31:1, s. 37-67
-
Journal article (peer-reviewed)abstract
- Perceived quality is one of the most critical aspects of product development that defines the successful design. This paper presents a new approach to perceived quality assessment by examining its elements, decomposed into a structure with the bottom-up sensory approach from the level of basic (‘ground’) attributes, covering almost every aspect of quality perception from the engineering viewpoint. The paper proposes a novel method for perceived quality attributes relative importance ranking, resulting in the balanced perceived quality of the final product within the given conditions. The proposed method helps to reach the equilibrium of the product’s quality equation from the perspective of design effort, time, and costs estimations. The authors introduce the Perceived Quality Framework (PQF), which is the taxonomy system for perceived quality attributes and the core of the attributes importance ranking (PQAIR) method. The research outcomes are based on findings of the qualitative exploratory study, including European and North American premium and luxury automotive manufacturers. An empirical structural validity test was performed to assess the usability and rigour of the proposed method. The results indicate that perceived quality evaluation can be significantly improved during all stages of product development.
|
|
| 16. |
- Stylidis, Kostas, 1978
(author)
-
Perceived Quality of Cars. A Novel Framework and Evaluation Methodology.
- 2019
-
Doctoral thesis (other academic/artistic)abstract
- The supremacy of the automotive manufacturers today is no longer driven by them achieving a superior manufacturing quality but increasingly depends on the customer’s quality perception. Average car consumers see a car’s quality as a fancy mixture of design, aesthetics, their own previous experiences and performance characteristics of the vehicle, unlike a combination of mechanical parts, software pieces, advanced materials, cutting-edge manufacturing processes, with technical knowledge, skills and high production volumes – all ingredients involved in the modern car creation. Perceived quality is one of the most critical aspects for product development that defines successful car design. Speaking of perceived quality, we are dealing with a complex, multifaceted adaptive system; a system where a human is the main agent. “Which product characteristics require the most attention for successful car design?” This is the question engineers and designers need to answer under the pressure of shrinking product development time, available technologies, and financial limitations, not to mention that the answer is expected to be given in numbers to sustain the fierce competition in today’s automotive industry. For this reason, the perceived quality must be understood and controlled during all stages of product development. The research presented in this thesis justifies the engineering viewpoint on perceived quality as an inevitable part of new product development. The core of this research is the Perceived Quality Framework (PQF), a taxonomy structure of perceived quality attributes and the Perceived Quality Attributes Importance Ranking (PQAIR) method, a novel method for perceived quality evaluation that can be applied to a variety of products, including cars. The PQF communicates the attribute-centric engineering viewpoint on quality perception, developed through cumulative studies in the premium and luxury market segment of the automotive industry. The PQAIR method equips engineers with practical tools for perceived quality evaluation. The proposed method helps to reach the equilibrium of the product’s quality equation from the perspective of design effort, time, and costs estimations. Altogether this introduces a new paradigm of perceived quality as the inevitable element integrated into the process of engineering endeavor regarding product attributes that communicates quality to the customer.
|
|
| 17. |
- Shahroozi, Zahra, 1992-
(author)
-
Survivability control using data-driven approaches and reliability analysis for wave energy converters
- 2024
-
Doctoral thesis (other academic/artistic)abstract
- Wave energy, with five times the energy density of wind and ten times the power density of solar, offers a compelling carbon-free electricity solution. Despite its advantages, ongoing debates surround the reliability and economic feasibility of wave energy converters (WECs). To address these challenges, this doctoral thesis is divided into four integral parts, focusing on optimizing the prediction horizon for power maximization, analyzing extreme waves' impact on system dynamics, ensuring reliability, and enhancing survivability in WECs.Part I emphasizes the critical importance of the prediction horizon for maximal power absorption in wave energy conversion. Using generic body shapes and modes, it explores the effect of dissipative losses, noise, filtering, amplitude constraints, and real-world wave parameters on the prediction horizon. Findings suggest achieving optimal power output may be possible with a relatively short prediction horizon, challenging traditional assumptions.Part II shifts focus to WEC system dynamics, analyzing extreme load scenarios. Based on a 1:30 scaled wave tank experiment, it establishes a robust experimental foundation, extending into numerical assessment of the WEC. Results underscore the importance of damping to alleviate peak forces. Investigating various wave representations highlights conservative characteristics of irregular waves, crucial for WEC design in extreme sea conditions.Part III explores the computational intricacies of environmental design load cases and fatigue analyses for critical mechanical components of the WEC. The analysis is conducted for hourly sea state damage and equivalent two-million-cycle loads. Finally, a comparison of safety factors between the ultimate limit state and fatigue limit state unfolds, illustrating the predominant influence of the ultimate limit state on point-absorber WEC design.Part IV, centers on elevating survivability strategies for WECs in extreme wave conditions. Three distinct controller system approaches leverage neural networks to predict and minimize the line force. Distinct variations emerge in each approach, spanning from rapid detection of optimal damping to integrating advanced neural network architectures into the control system with feedback. The incorporation of a controller system, refined through experimental data, showcases decreases in the line force, providing a practical mechanism for real-time force alleviation.This thesis aims to contribute uniquely to the goal of advancing wave energy conversion technology through extensive exploration.
|
|
| 18. |
|
|
| 19. |
- Sarkar, Saptarshi, 1992, et al.
(author)
-
Transient torque reversals in indirect drive wind turblnes
- 2023
-
In: Wind Energy. - 1099-1824 .- 1095-4244. ; 26, s. 691-716
-
Journal article (peer-reviewed)abstract
- The adverse effect of transient torque reversals (TTRs) оп wind turЬine gearboxes сап Ье severe due to their magnitude and rapid occurrence compared with other equipment. The primary damage is caused to the bearings as the bearing loaded zone rapidly changes its direction. Other components are also affected Ьу TTRs (such as gear tooth); however, its impact оп bearings is the largest. While the occurrence and severity of TTRs are acknowledged in the industry, there is а lack of academic literature оп their initiation, propagation and the associated risk of damage. Furthermore, in the wide range of operation modes of а wind turЬine, it is not known which modes сап lead to TTRs. Further, the interdependence of TTRs оп environmental loading like the wind is also not reported. This paper aims to address these unknowns Ьу expanding оп the understanding of TTRs using а high-fidelity numerical model of an indirect drive wind turЬine with а douЬly fed induction generator (DFIG). То this end, а multibody model of the drivetrain is developed in SIMPACK. The model of the drivetrain is explicitly coupled to state-of-the-art wind turЬine simulator OpenFAST and а grid-connected DFIG developed in MATLAB®'s Simulink® allowing а coupled analysis of the electromechanical system. А metric termed slip risk duration is proposed in this paper to quantify the risk associated with the TTRs. The paper first investigates а wide range of IEC design load cases to uncover which load cases сап lead to TTRs. lt was found that emergency stops and symmetric grid voltage drops сап lead to TTRs. Next, the dependence of the TTRs оп inflow wind parameters is investigated using а sensitivity analysis. lt was found that the instantaneous wind speed at the onset of the grid fault or emergency shutdown was the most influential factor in the slip risk duration. The investigation enaЫes the designer to predict the occurrence of TTRs and quantify the associated risk of damage. The paper concludes with recommendations for utility-scale wind turЬines and directions for future research.
|
|
| 20. |
- Bergman, Martin, 1985
(author)
-
Affective Surface Engineering for Product Design
- 2016
-
Licentiate thesis (other academic/artistic)abstract
- Design research, sensation and perception, hard metrology, emotional functions, semantics, surface roughness, product interaction, core values, total appearance… the list of scientific phrases never ends. Yet, what do they mean and how shall we use it when we are communicating with the industry and our end users? Is it possible to link the product experience to process parameters, put a number onto it? When you can measure spoken needs or even better, implied needs, of a product, and relate that data to the production, it is possible do create advanced products with high interaction stimuli. By joining engineering sciences (hard metrology) with design science (soft metrology) correlations between customer’s product experience (emotional functions) and surface properties (technical functions) can be established.The research briefly handles an optimization process where the framework from Kansei Engineering (KE) is used to evaluate the semantics issues primarily regarding materials and functional surfaces of products. The basic idea is that; the stakeholder’s experience shall be observed already at the phase of ideation in the product development process, which then facilitates the project (in regard to the total appearance) later on when a concept reaches the production stage. The results presented in this thesis are carried out through a number of case studies together with the industry. The main result and aim of the research is a developed robust approach that links emotional functions with technical functions, which in the next step facilitates the improvement of the total appearance of a product. Nevertheless, it should be recognized that research is not yet complete. It is an iterative process, which confirms that the loop of the method needs to be complete. The developed method is a toolbox with the fundamental tools and workshops to facilitate the correlation process mentioned above, however the packaging of the final step in the method is not yet complete. The future research outlook will focus on the “independent industry implementation” where the method is used by the industry by guidelines only, thus without researchers support.
|
|
| 21. |
- Stylidis, Kostas, 1978, et al.
(author)
-
Perceived Quality Evaluation with the Use of Extended Reality
- 2019
-
In: Proceedings of the International Conference on Engineering Design, ICED. - : Cambridge University Press (CUP). - 2220-4334 .- 2220-4342. ; 1:1, s. 1993-2002
-
Conference paper (peer-reviewed)abstract
- If designers want to communicate quality aspects of the product, there is a need to bring these characteristics into the measurable space of perceived quality (PQ) attributes. To illustrate the solution for designers' dilemma of the “best design choice” in this study we applied the PQ attributes importance ranking (PQAIR) method, with the example of a bread toaster. We choose for evaluation three PQ attributes which can significantly influence visual quality of a product: Gap, Flush and Parallelism. We performed the experiment measuring subjective preferences over the toaster designs of two respondent's groups - “Designers” and “Customers.” We used sequentially: (i) web-survey (still images); (ii) desktop system; and (iii) fully immersive head-mounted display system (Virtual Reality). Consequently, we conducted a post-experiment survey regarding subjective preferences, related to the PQ communication channels that have been implemented during the study. Our results indicate advantages and drawbacks for each PQ communication method that we applied in this experiment and encourage further research in the area of products' perceived quality assessment.
|
|
| 22. |
-
Systems Perspectives on Biorefineries 2013
- 2013
-
Editorial collection (peer-reviewed)abstract
- Replacing fossil fuels with biomass for the production of energy carriers, materialsand specialty chemicals is a challenge that now confronts humanity. In whichapplications shall we use limited resources of biomass? How can biomass berefined into the products we want? What are the consequences of demanding toomuch? What is an optimal design of a biorefinery? Where should they be located?What policy instruments are required to realise the biorefineries of the future?There is not one final answer to these questions. However, different systems studiescan provide us with complementary pieces of the puzzle. These can be valuableby themselves, or be brought together into a larger and more complex picture.Systems Perspectives on Biorefineries 2013 is an updated edition of SystemsPerspectives on Biorefineries 2012 and contains twelve chapters that address differenttopics related to the immensely important issue of how the world’s biomassresources can, or should, be converted into the goods we need and desire. Thebook is still far from complete, but it is a contribution and a start...
|
|
| 23. |
- Ribeiro, Luis, et al.
(author)
-
Industrial Agents for the Fast Deployment of Evolvable Assembly Systems
- 2015. - 1st ed.
-
In: Industrial Agents. - Amsterdam, Netherlands : Elsevier. - 9780128003411 ; , s. 301-321, s. 301-322
-
Book chapter (peer-reviewed)abstract
- The current manufacturing scenario is characterized by high market unpredictability. Agility is therefore a central challenge for modern companies that need to understand and be proactive towards their product offer in respect to “what is offered, when it is offered, where, how and by whom” (Brown & Bessant 2003).The “what” and the “when” are particularly relevant to the research in emerging paradigms as they account for variety, customization and volume; and timing, speed and seasonality (Brown & Bessant 2003).In this scenario, several design approaches and models have been proposed in the last decade to enable re-configurability and subsequently enhance the companies’ ability to adjust their offer in nature and time.From a paradigmatic point of view research has concentrated on the organizational structure of the shop-floor and the associated controls aspects. Concepts like Reconfigurable Manufacturing Systems (RMS) (Koren & Shpitalni 2010) and Fractal Factories (FF) (Montreuil 1999) support the physical construction of production systems by regulating their layout and making a few assumptions on their logical organization. On the other hand, concepts like Bionic Manufacturing Systems (BMS)(Ueda 1992), Holonic Manufacturing Systems (HMS)(Van Brussel et al. 1998), Evolvable Assembly Systems (Ribeiro et al. 2010) essentially provide the theoretical guidelines for the logical/computational organization of the system (see (Tharumarajah 1996) for a comparison between BMS, HMS and FF and (Setchi & Lagos 2004) for the rationale supporting the shift from Dedicated Lines to Flexible Manufacturing System and finally RMS).While these paradigms provide the conceptual framework and the main design guidelines their actual interpretation and implementation has led to a wider set of architectures (Monostori, Váncza & Kumara 2006; Leitão 2009; Parunak 2000; Pěchouček & Mařík 2008).These architectures align the high-level principles with the technological offer and limitations while seeking to address the re-configurability requirements of (Mehrabi, Ulsoy & Koren 2000; Rösiö & Säfsten 2013):module mobility – modules are easy and quick to move and install;“diagnosability” – it is quick to identify the sources of quality and reliability problems;“integrability” – modules are easy to integrate into the rest of the system.“convertibility” – it is easy and quick to switch between existing products and it is easy to adapt the system to future products;scalability – it is easy to enlarge and downsize the production system;“automatibility” – a dynamic level of automation is enabled;modularity – all system elements are designed to be modular;customization – the capability and flexibility of the production system is designed according to the products to be produced in the system.Instant deployment, as addressed in the present chapter directly addresses mobility, “integrability”, “convertibility”, scalability and customization. Mechatronic modularity is a prerequisite and is enforced by the proposed architecture and the considered modular design. “Diagnosability” was not specifically tackled.In this context, the chapter analyses the agent-based architecture related with the Instantly Deployable Evolvable Assembly System (IDEAS) project that is inspired by the Evolvable Assembly System (EAS) paradigm (Ribeiro et al. 2010) as a mechanism to enable fast deployment of mechatronic modules. EAS advocates the use of process-oriented modules and envisions the production system as a collection of processes and the associated interacting agents.The architecture and the related test cases are used to draw the main lessons learned in respect to technological and conceptual implications.In this context, the remainder of this text is organized as follows: section 1.1 discusses the main deployment challenges, section 1.2 details the reference architecture and associated concepts, section 1.3 presents the principal implementation decisions, section 1.4 features the main lessons learned, sections 1.5 discusses the benefits of the proposed approach and finally section 1.6 reflects on the main conclusions.
|
|
| 24. |
- Kurdve, Martin, et al.
(author)
-
Can Social Sustainability Values be Incorporated in a Product Service System for Temporary Public Building Modules?
- 2017
-
In: Procedia CIRP. - : Elsevier. - 2212-8271 .- 2212-8271. ; 64, s. 193-198
-
Journal article (peer-reviewed)abstract
- The temporary constructions industry has cost efficiency and sustainability challenges that may require new innovative business models as well as product and processes. This paperaims to discuss how social sustainability services can be included in product service system (PSS)by investigating a case where employment is offered in distributed temporary building module manufacturing in the PSS context. The case has been evaluated against PSS literature. Recent reviews and literature on inclusion of social sustainability and PSS for buildings were used. It is concluded that the current concept fits basic definitions of PSS although it is not typical. The social value of employment is difficult to evaluate and inclusion in PSS needs further research. Design practice could be used to further develop the services in the studied concept. © 2017 The Authors.
|
|
| 25. |
- Sandberg, Marcus, et al.
(author)
-
A modelling methodology for assessing use of datacenter waste heat in greenhouses
- 2017
-
Conference paper (peer-reviewed)abstract
- In Sweden, the number of datacenters establishments are steadily increasing thanks to green, stable and affordable electricity, free air cooling, advantageous energy taxes and well-developed Internet fiber infrastructures. Even though datacenters use a lot of energy, the waste heat that they create is seldom reused. A possible cause is that this waste heat is often low grade and airborne: it is therefore hard to directly inject it into a district heating system without upgrades, which require additional energy and equipment that generate extra costs. One option for reusing this heat without needs for upgrades is to employ it for heating up greenhouses. But assessing the feasibility of this approach by building physical prototypes can be costly, therefore using computer models to simulate real world conditions is an opportunity. However, there is a lack of computer modelling methodologies that can assess the possibility of using waste heat from datacenters in greenhouses in cold climates.The objective of this paper is therefore to propose such a methodology and discuss its benefits and drawbacks in comparison with other research studies. This methodology combines computational fluid dynamics, process modelling and control engineering principles into a computer model that constitutes a decision support system to study different waste heat and greenhouse or mushroom house scenarios.The paper validates the strategy through a case study in northern Sweden, where we assess the amount of produced waste heat by collecting temperature, relative humidity, and fan speed data for the air discharged from the datacenter.The resulting methodology, composed by conducting measurements and computer models, calculations can then be used for other datacenter operators or greenhouse developers to judge whether it is possible or not to build greenhouses using datacenter waste heat.
|
|
