1. |
- Finne Wistrand, Anna, et al.
(author)
-
Tuned mechanical properties achieved by varying polymer structure : Knowledge that generates new materials for tissue engineering
- 2007
-
In: Chinese Journal of Polymer Science. - 0256-7679 .- 1439-6203. ; 25:2, s. 113-118
-
Journal article (peer-reviewed)abstract
- By changing both the monomer composition and the polymer structure, we have varied the mechanical properties of resorbable polymers. The polymers were synthesized by ring-opening polymerization using L-lactide (LLA), epsilon-caprolactone (epsilon CL), trimethylene carbonate (TMC) and 1,5-dioxepan-2-one (DXO) as monomers. Well-defined triblock copolymers, microblock copolymers and networks have been evaluated, and comparisons between them show that it is possible to tune the mechanical properties. Triblock copolymers with an amorphous middle block of poly(1,5-dioxepan-2-one) (PDXO) and semi-crystalline end-blocks of poly(epsilon-caprolactone) (PCL) were stronger and had a higher strain at break than triblock copolymers with poly(L-lactide) (PLLA) as end-blocks. Polymers with both DXO and TMC in the amorphous middle-block and PLLA as end-blocks showed a lower stress at break, but the material gained elasticity, a property which is very valuable in tissue engineering. Mechanical properties of networks, synthesized by a novel method, containing PDXO and PCL are also presented. Although it is difficult to compare them with the uncross-linked polymers, this is an additional way to modify and widen the properties.
|
|
2. |
- Larsson, Mikael, 1982, et al.
(author)
-
Different types of microfibrillated cellulose as filler materials in polysodium acrylate superabsorbents
- 2011
-
In: Chinese Journal of Polymer Science (English Edition). - : Springer Science and Business Media LLC. - 1439-6203 .- 0256-7679. ; 29:4, s. 407-413
-
Journal article (peer-reviewed)abstract
- Three types of microfibrillated cellulose (MFC) with differences in structure and surface charge were used at low concentration as filler materials in polysodium acrylate superabsorbents (SAPs). The swelling of the composite hydrogels was determined in 0.9% NaCl solution as well as in deionized water. The shear modulus of the samples was determined through uniaxial compression analysis after synthesis and after swelling in 0.9% NaCl solution. Furthermore, the ability to retain filler effects after washing was investigated. The results showed that all of the investigated MFCs had a strong reinforcing effect on the shear modulus after synthesis. The filler effect on swelling and on the associated shear modulus of swollen samples showed a more complicated dependence on structure and surface charge. Finally, it was found that the filler effects were reasonably retained after washing and subsequent drying. The results confirm that MFC holds great potential as a filler material in superabsorbent applications. Furthermore, the results provide some insight on how the structural properties and surface charge of MFC will affect gel properties depending on swelling conditions. This information should be useful in evaluating the use of different types of MFC in future applications.
|
|
3. |
|
|
4. |
- Zhou, Xian-Jing, et al.
(author)
-
Thermo-sensitive Microgels Supported Gold Nanoparticles as Temperature-mediated Catalyst
- 2019
-
In: Chinese Journal of Polymer Science. - : Springer Science and Business Media LLC. - 0256-7679 .- 1439-6203. ; 37:3, s. 235-242
-
Journal article (peer-reviewed)abstract
- Microgels with a thermo-sensitive poly(N-isopropylacrylamide) (polyNIPAm) backbone and bis-imidazolium (VIM) ionic cross-links, denoted as poly(NIPAm-co-VIM), were successfully prepared. The as-synthesized ionic microgels were converted to nanoreactors, denoted as Au@PNI MGs, upon generation and immobilization of gold nanoparticles (Au NPs) of 5-8 nm in size into poly(NIPAm-co-VIM). The content of Au NPs in microgels could be regulated by controlling the 1,6-dibromohexane/vinylimidazole molar ratio in the quaternization reaction. The microgel-based nanoreactors were morphologically spherical and uniform in size, and presented reversible thermo-sensitive behavior with volume phase transition temperatures (VPTTs) at 39-40 degrees C. The Au@PNI MGs were used for the reduction of 4-nitrophenol, of which the catalytic activity could be modulated by temperature.
|
|
5. |
|
|