1. |
- Jing, Li, et al.
(author)
-
In-situ AFM and EIS study of a solventborne alkyd coating with nanoclay for corrosion protection of carbon steel
- 2015
-
In: Progress in organic coatings. - : Elsevier BV. - 0300-9440 .- 1873-331X. ; 87, s. 179-188
-
Journal article (peer-reviewed)abstract
- A solventborne alkyd composite coating containing modified montmorillonite (MMT) nanoclay was made on carbon steel, and its corrosion protection was investigated by in-situ atomic force microscopy (AFM) and electrochemical impedance spectroscopy (EIS) measurements in 3 wt.% NaCl solution. X-ray diffraction (XRD) analysis indicated intercalation of the MMT sheets in the composite coating. Thermo-gravimetric analysis (TGA) demonstrated improved thermal stability of the composite coating due to the modified nanoclay. Scanning electron microscopy (SEM) and AFM examination revealed dispersion and also some aggregation of the nanoclay particles in the coating. In-situ AFM images show a stable coating surface at nano-scale during relative long time exposure in the NaCl solution, indicating an enhanced stability of the composite coating. The EIS results confirmed that the composite coating provides an enhanced barrier type corrosion protection for carbon steel in the corrosive solution, which could be attributed to the intercalated lamellar MMT sheets in the coating that block the defects and decrease the transport of water and corrosive species.
|
|
2. |
- Li, Jing, et al.
(author)
-
In-Situ AFM and EIS Study of Waterborne Acrylic Latex Coatings for Corrosion Protection of Carbon Steel
- 2015
-
In: Journal of the Electrochemical Society. - : The Electrochemical Society. - 0013-4651 .- 1945-7111. ; 162:1, s. C55-C63
-
Journal article (peer-reviewed)abstract
- Corrosion protection for carbon steel by three waterborne styrene-acrylic latex coatings with different glass transition temperature (Tg) and levels of hydrophobicity has been studied by in-situ atomic force microscope (AFM) and electrochemical impedance spectroscopy (EIS) measurements in 3.0 wt% NaCl solution. The AFM images reveal the micro-and nano-structure of and pinholes in the coatings as well as their changes during exposure in the solution, whereas the EIS spectra vs. time of exposure show the barrier property, stability and degradation of the coatings. The coating with crosslinking and high level of hydrophobicity exhibited a high barrier property and long-term corrosion protection in the solution despite of some shallow pinholes. The coating without crosslinking but having high Tg and high level of hydrophobicity also displayed a high barrier property and certain stability although initial changes occur in the solution. However, for the coating without crosslinking and with low Tg and relative low level of hydrophobicity, some dissolution and open-up of defects occurred on the surface shortly after exposure and the coating lost its barrier property rapidly in the solution. The reasons for the different behaviors between the coatings are discussed with respect to the crosslinking, Tg and the hydrophobicity level of the coating.
|
|
3. |
- Li, Jing, et al.
(author)
-
Towards the mechanism of electrochemical activity and self-healing of 1 wt% PTSA doped polyaniline in alkyd composite polymer coating : Combined AFM-based studies
- 2016
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 6:23, s. 19111-19127
-
Journal article (peer-reviewed)abstract
- A composite solvent-borne alkyd coating with 1 wt% p-toluene sulfonic acid (PTSA) doped polyaniline (PANI) was prepared. The mechanisms of electrochemical activity and self-healing properties of the composite coating were investigated by in situ atomic force microscopy (AFM), intermodulation AFM (ImAFM), electrochemical controlled (EC)-AFM combined with cyclic voltammetry (CV), Kelvin force microscopy (KFM), and Fourier transform infrared spectroscopy (FTIR), as well as open-circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) methods. The ImAFM demonstrates the multiphase structure of the composite coating and a high compatibility between the doped PANI and alkyd matrix. The CV and EC-AFM results reveal a high electrochemical activity of the doped PANI in the composite coating as well as reversible redox reactions between the emeraldine salt (ES) and leuco emeraldine base (LB) forms. The Volta potential mapping of KFM demonstrates a strong self-healing ability of the doped PANI in air conditions. The good electrochemical connection between the fine network of PANI in the composite coating and metal surface underneath enable the occurrence of reversible redox reaction between the ES/LB forms of doped PANI and a concomitant release of dopant anions both in air and in 3 wt% NaCl solution as demonstrated by OCP and EIS results. These therefore lead to the strong passivation and self-healing effect of the composite coated on the carbon steel surface.
|
|