| 1. |
|
|
| 2. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 3. |
|
|
| 4. |
- Abgrall, N., et al.
(author)
-
The large enriched germanium experiment for neutrinoless double beta decay (LEGEND)
- 2017
-
In: AIP Conference Proceedings. - : Author(s). - 1551-7616 .- 0094-243X. ; 1894
-
Conference paper (peer-reviewed)abstract
- The observation of neutrinoless double-beta decay (0νββ) would show that lepton number is violated, reveal that neu-trinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely low backgrounds, at the level of ∼0.1 count /(FWHM·t·yr) in the region of the signal. The current generation 76Ge experiments GERDA and the Majorana Demonstrator, utilizing high purity Germanium detectors with an intrinsic energy resolution of 0.12%, have achieved the lowest backgrounds by over an order of magnitude in the 0νββ signal region of all 0νββ experiments. Building on this success, the LEGEND collaboration has been formed to pursue a tonne-scale 76Ge experiment. The collaboration aims to develop a phased 0νββ experimental program with discovery potential at a half-life approaching or at 1028 years, using existing resources as appropriate to expedite physics results.
|
|
| 5. |
- Cai, Lei, et al.
(author)
-
GeospaceLAB : Python package for managing and visualizing data in space physics
- 2022
-
In: Frontiers in Astronomy and Space Sciences. - : Frontiers Media SA. - 2296-987X. ; 9
-
Journal article (peer-reviewed)abstract
- In the space physics community, processing and combining observational and modeling data from various sources is a demanding task because they often have different formats and use different coordinate systems. The Python package GeospaceLAB has been developed to provide a unified, standardized framework to process data. The package is composed of six core modules, including DataHub as the data manager, Visualization for generating publication quality figures, Express for higher-level interfaces of DataHub and Visualization, SpaceCoordinateSystem for coordinate system transformations, Toolbox for various utilities, and Configuration for preferences. The core modules form a standardized framework for downloading, storing, post-processing and visualizing data in space physics. The object-oriented design makes the core modules of GeospaceLAB easy to modify and extend. So far, GeospaceLAB can process more than twenty kinds of data products from nine databases, and the number will increase in the future. The data sources include, e.g., measurements by EISCAT incoherent scatter radars, DMSP, SWARM, and Grace satellites, OMNI solar wind data, and GITM simulations. In addition, the package provides an interface for the users to add their own data products. Hence, researchers can easily collect, combine, and view multiple kinds of data for their work using GeospaceLAB. Combining data from different sources will lead to a better understanding of the physics of the studied phenomena and may lead to new discoveries. GeospaceLAB is an open source software, which is hosted on GitHub. We welcome everyone in the community to contribute to its future development.
|
|
| 6. |
- Cao, Qi, et al.
(author)
-
Jointly estimating the most likely driving paths and destination locations with incomplete vehicular trajectory data
- 2023
-
In: Transportation Research, Part C: Emerging Technologies. - 0968-090X. ; 155
-
Journal article (peer-reviewed)abstract
- With an ever-increasing deployment density of probe and fixed sensors, massive vehicular trajectory data is available and show a promising foundation to improve the observability of dynamic traffic demand pattern. However, due to technical and privacy issues, the raw trajectories are not always complete and the paths and destinations between discontinuous trajectory nodes are usually missing. This paper proposes a probabilistic method to jointly reconstruct the missing driving path and destination location of vehicles with incomplete trajectory data. One problem-specific HMM-structured model incorporating spatial and temporal analysis (ST-HMM) is constructed to define the matching probability between observed data and possible movement. Two algorithms, namely candidate set generation and best-match search algorithms, are developed to seek the most possible one as matching result. It can implement end-to-end processing from incomplete trajectory data to complete and connective paths and destinations for the target vehicle. The proposed method is tested based on field-test data and city-wide road network. Compared with two benchmark methods, the proposed method improved the matching accuracy in terms of both path identification and destination inference. Additionally, sensitivity analyses on the size of training dataset and candidate set were performed. We believe that experiment results of these sensitivity analyses can help to provide guidance on data sensing and candidate generation.
|
|
| 7. |
- Cho, Hae Sung, et al.
(author)
-
Isotherms of individual pores by gas adsorption crystallography
- 2019
-
In: Nature Chemistry. - : Springer Science and Business Media LLC. - 1755-4330 .- 1755-4349. ; 11:6, s. 562-570
-
Journal article (peer-reviewed)abstract
- Accurate measurements and assessments of gas adsorption isotherms are important to characterize porous materials and develop their applications. Although these isotherms provide knowledge of the overall gas uptake within a material, they do not directly give critical information concerning the adsorption behaviour of adsorbates in each individual pore, especially in porous materials in which multiple types of pore are present. Here we show how gas adsorption isotherms can be accurately decomposed into multiple sub-isotherms that correspond to each type of pore within a material. Specifically, two metal-organic frameworks, PCN-224 and ZIF-412, which contain two and three different types of pore, respectively, were used to generate isotherms of individual pores by combining gas adsorption measurements with in situ X-ray diffraction. This isotherm decomposition approach gives access to information about the gas uptake capacity, surface area and accessible pore volume of each individual pore, as well as the impact of pore geometry on the uptake and distribution of different adsorbates within the pores.
|
|
| 8. |
- Dagenais, G. R., et al.
(author)
-
Variations in Diabetes Prevalence in Low-, Middle-, and High-Income Countries: Results From the Prospective Urban and Rural Epidemiological Study
- 2016
-
In: Diabetes Care. - : American Diabetes Association. - 0149-5992 .- 1935-5548. ; 39:5, s. 780-787
-
Journal article (peer-reviewed)abstract
- OBJECTIVE The goal of this study was to assess whether diabetes prevalence varies by countries at different economic levels and whether this can be explained by known risk factors. The prevalence of diabetes, defined as self-reported or fasting glycemia >= 7 mmol/L, was documented in 119,666 adults from three high-income (HIC), seven upper-middle-income (UMIC), four lower-middle-income (LMIC), and four low-income (LIC) countries. Relationships between diabetes and its risk factors within these country groupings were assessed using multivariable analyses. Age- and sex-adjusted diabetes prevalences were highest in the poorer countries and lowest in the wealthiest countries (LIC 12.3%, UMIC 11.1%, LMIC 8.7%, and HIC 6.6%; P < 0.0001). In the overall population, diabetes risk was higher with a 5-year increase in age (odds ratio 1.29 [95% CI 1.28-1.31]), male sex (1.19 [1.13-1.25]), urban residency (1.24 [1.11-1.38]), low versus high education level (1.10 [1.02-1.19]), low versus high physical activity (1.28 [1.20-1.38]), family history of diabetes (3.15 [3.00-3.31]), higherwaist-to-hip ratio (highest vs. lowest quartile; 3.63 [3.33-3.96]), and BMI (>= 35 vs. < 25 kg/m(2); 2.76 [2.52-3.03]). The relationship between diabetes prevalence and both BMI and family history of diabetes differed in higher-versus lower-income country groups (P for interaction < 0.0001). After adjustment for all risk factors and ethnicity, diabetes prevalences continued to show a gradient (LIC 14.0%, LMIC 10.1%, UMIC 10.9%, and HIC 5.6%). Conventional risk factors do not fully account for the higher prevalence of diabetes in LIC countries. These findings suggest that other factors are responsible for the higher prevalence of diabetes in LIC countries.
|
|
| 9. |
- Foote, Andrew D., et al.
(author)
-
Convergent evolution of the genomes of marine mammals
- 2015
-
In: Nature Genetics. - : Springer Science and Business Media LLC. - 1061-4036 .- 1546-1718. ; 47:3, s. 272-275
-
Journal article (peer-reviewed)abstract
- Marine mammals from different mammalian orders share several phenotypic traits adapted to the aquatic environment and therefore represent a classic example of convergent evolution. To investigate convergent evolution at the genomic level, we sequenced and performed de novo assembly of the genomes of three species of marine mammals (the killer whale, walrus and manatee) from three mammalian orders that share independently evolved phenotypic adaptations to a marine existence. Our comparative genomic analyses found that convergent amino acid substitutions were widespread throughout the genome and that a subset of these substitutions were in genes evolving under positive selection and putatively associated with a marine phenotype. However, we found higher levels of convergent amino acid substitutions in a control set of terrestrial sister taxa to the marine mammals. Our results suggest that, whereas convergent molecular evolution is relatively common, adaptive molecular convergence linked to phenotypic convergence is comparatively rare.
|
|
| 10. |
- Huang, Wei, et al.
(author)
-
Substrate Promiscuity, Crystal Structure, and Application of a Plant UDP-Glycosyltransferase UGT74AN3
- 2024
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 14:1, s. 475-488
-
Journal article (peer-reviewed)abstract
- Glycosyltransferases are effective enzymes for glycosylating natural products (NPs), and some of them have the unusual property of being exceedingly promiscuous catalytically toward a range of substrates. UGT74AN3 is a plant glycosyltransferase identified from Catharanthus roseus in our previous work. In this study, we found that UGT74AN3 exhibits high substrate promiscuity toward 78 acceptors and 6 sugar donors and also exhibits N-/S-glycosylation activity toward simple aromatic compounds. The crystal structures of UGT74AN3 in the complex with various NPs were solved. Sugar donor recognition of UGT74AN3 was altered by structure-based mutagenesis, and the T145V mutant shifted its sugar donor preference from UDP-Glc to UDP-Xyl. Structural analysis reveals that a spacious U-shaped hydrophobic binding pocket accounts for the high substrate promiscuity of UGT74AN3. The residues E85 and F193 might serve as gatekeepers of UGT74AN3 to control substrate binding. In addition, a rare substrate binding mode was discovered in the structure of UGT74AN3, and the process of substrate flipping in the pocket was charted by molecular dynamics simulations. Moreover, a cost-effective one-pot system by coupling UGT74AN3 with AtSuSy, a sucrose synthase, was established for in situ generating and recycling UDP-Glc from sucrose and UDP to glycosylate NPs. Our study reveals the structural basis underlying the substrate promiscuity of UGT74AN3 and provides an efficient and economical enzymatic synthesis strategy for producing valuable glycosides for drug discovery.
|
|
| 11. |
- Ji, S., et al.
(author)
-
Brief Questionnaire Derived from PANSS Using a General Probability Model to Assess and Monitor the Clinical Features of Schizophrenia
- 2016
-
In: Pharmacopsychiatry. - : Georg Thieme Verlag KG. - 0176-3679 .- 1439-0795. ; 49:3, s. 117-123
-
Journal article (peer-reviewed)abstract
- Aim: Patients with schizophrenia require continuous treatment much longer than the duration of their hospitalization, which makes their family members essential in their medical care. However, the evaluation of the disease state could only be done by professionals. This prompted us to seek potent indicators of disease states that are understandable and easy to use for the patients' family.Method: Specific items were firstly extracted from the total PANSS scale. Then 3 096 PANSS scores were analyzed using a nonlinear mixed-effects model (NONMEM). A questionnaire was subsequently developed for family members to assess and monitor the overall severity of schizophrenia. Finally this questionnaire was validated in 33 patients.Results: 2 items (P1 and N4) were extracted from the 8 effective remission items according to the correlation coefficients between the total PANSS score and different combinations of items. P1N4 was defined as the sum of these 2 items. A model was then developed to describe the probability of PANSS >= 60, with P1N4 as indicators. The results indicated that P1N4 could make a good predictor of the overall probability of PANSS >= 60, which was independent of treatment. A brief questionnaire with 7 questions was developed based on the results. External validation results indicated the questionnaire's suitability for a good assessment.Conclusion: Questionnaire developed based on P1 and N4 may facilitate the patients' family members to better understand the disease state and help to prevent relapse.
|
|
| 12. |
- Klionsky, Daniel J., et al.
(author)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
In: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Research review (peer-reviewed)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 13. |
- Kristan, Matej, et al.
(author)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
In: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
| 14. |
- Li, Wang, et al.
(author)
-
Correlation of microstructure and dynamic softening mechanism of UNS S32101 duplex stainless steel during elevated temperature tensile testing
- 2022
-
In: Materials Science & Engineering. - : Elsevier BV. - 0921-5093 .- 1873-4936. ; 855
-
Journal article (peer-reviewed)abstract
- The dynamic substructural development and softening mechanism of UNS S32101 duplex stainless steel were comprehensively investigated by employing hot-tensile tests at various strain rates of 0.1-10 s(-1) at a fixed temperature of 1200 degrees C. Different flow behaviors were attributed to the microstructural evolution and restoration process under various hot-deformation conditions. The alternative restoration mechanisms of ferrite in the current alloy were closely associated with the evolution of the misorientation angle in the (sub)grains, depending on the applied strain rates. Therein, three distinct softening mechanisms were found in ferrite, i) subgrain coalescence (SC) at 0.1 s(-1), ii) continuous dynamic recrystallization (CDRX) at 1 s(-1) and iii) subgrain rotationassisted discontinuous dynamic recrystallization (SR-assisted DDRX) at 10 s(-1). During SR-assisted DDRX process, new DRX nuclei were preferentially formed at the high-angle grain boundaries/phase boundaries (HAGBs/PBs) through the growth of highly misoriented subgrains. In contrast to ferrite, the available dynamic softening behavior of austenite, unlike the classical DDRX mechanism characterized by strain-induced boundary migration (SIBM), is affected by a limited number of pre-existing HAGBs. At lower strain rates of 0.1 and 1 s(-1), the nucleation process of DRX in austenite is analogous to the CDRX behavior, whereas the growth characteristics conform to DDRX, thus, it can be called dynamic recovery-assisted DDRX (DRV-assisted DDRX). At a high strain rate of 10 s(-1), DRX nucleation mainly took place through the strain-induced twin boundaries (TBs) transformation into HAGBs, and then rapidly grew via SIBM, referred to as TB-assisted DDRX.
|
|
| 15. |
- Li, Wang, et al.
(author)
-
New comprehension on the microstructure, texture and deformation behaviors of UNS S32101 duplex stainless steel fabricated by direct cold rolling process
- 2022
-
In: Materials Science & Engineering. - : Elsevier BV. - 0921-5093 .- 1873-4936. ; 845, s. 143150-
-
Journal article (peer-reviewed)abstract
- The effect of cold deformation on the detailed microstructure evolution, texture development and deformation behaviors/mechanisms of UNS S32101 duplex stainless steel (DSS2101) during the direct cold rolling process was investigated. The results showed that throughout the cold deformation process, the negative texture of {001}<110> component was nonexistent in deformed ferrite, and most texture components were mainly concentrated on alpha/gamma-fibers. Detwinning in austenite was substantial responsible for the reorientation in {111}< 112> towards {111}<110> of gamma-fiber in ferrite rather than martensite transformation. Austenite texture were composed of {110}<100> Goss and {110}<115> Goss/Brass components at heavy deformation (50% and 70%). The refinement and deformation behavior in ferrite was attributed to microbands (MBs) subdivision and dislocation activities, whilst that of austenite mainly occurred through twinning, strain induced detwinning (SID) and strain induced martensite (SIM).
|
|
| 16. |
- Tang, Yue, et al.
(author)
-
Response Time Analysis and Priority Assignment of Processing Chains on ROS2 Executors
- 2020
-
In: 2020 IEEE Real-Time Systems Symposium (RTSS). - 9781728183244 - 9781728183251 ; , s. 231-243
-
Conference paper (peer-reviewed)abstract
- ROS (Robot Operating System) is currently the most popular robotic software development framework. Robotic software in safe-critical domain are usually subject to hard realtime constraints, so designers must formally model and analyze their timing behaviors to guarantee that real-time constraints are always honored at runtime. This paper studies real-time scheduling and analysis of processing chains in ROS2, the second-generation ROS with a major consideration of real-time capability. First, we study response time analysis of processing chains on ROS2 executors. We show that the only existing result of this problem is both optimistic and pessimistic, and develop new techniques to address these problems and significantly improve the analysis precision. Second, we reveal that the response time of a processing chain on an executor only depends on its last scheduling entity (callback), which provides useful guidance for designers to improve not only the response time bound, but also the actual worst-case/average response time of the system at little design cost. We conduct experiments with both randomly generated workload and a case study on realistic ROS2 platforms to evaluate and demonstrate our results.
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
- Yue, Siyao, et al.
(author)
-
Brown carbon from biomass burning imposes strong circum-Arctic warming
- 2022
-
In: ONE EARTH. - : Elsevier BV. - 2590-3330 .- 2590-3322. ; 5:3, s. 293-304
-
Journal article (peer-reviewed)abstract
- Rapid warming in the Arctic has a huge impact on the global environment. Atmospheric brown carbon (BrC) is one of the least understood and uncertain warming agents due to a scarcity of observations. Here, we performed direct observations of atmospheric BrC and quantified its light-absorbing properties during a 2 month circum-Arctic cruise in summer of 2017. Through observation-constrained modeling, we show that BrC, mainly originated from biomass burning in the mid-to high latitudes of the Northern Hemisphere (similar to 60%), can be a strong warming agent in the Arctic region, especially in the summer, with an average radiative forcing of-90 mW m(-2) (similar to 30% relative to black carbon). As climate change is projected to increase the frequency, intensity, and spread of wildfires, we expect BrC to play an increasing role in Arctic warming in the future.
|
|
| 20. |
- Yue, Zhang, et al.
(author)
-
Effect of Nanobubble Evolution on Hydrate Process : A Review
- 2019
-
In: JOURNAL OF THERMAL SCIENCE. - : SPRINGER. - 1003-2169 .- 1993-033X. ; 28:5, s. 948-961
-
Research review (peer-reviewed)abstract
- As a huge reserve for potential energy, natural gas hydrates (NGHs) are attracting increasingly extra attentions, and a series of researches on gas recovery from NGHs sediments have been carried out. But the slow formation and dissociation kinetics of NGHs is a major bottleneck in the applications of NGHs technology. Previous studies have shown that nanobubbles, which formed from melt hydrates, have significant promotion effects on dissociation and reformation dynamics of gas hydrates. Nanobubbles can persist for a long time in liquids, disaccording with the standpoint of classical thermodynamic theories, thus they can participate in the hydrate process. Based on different types of hydrate systems (gas + water, gas +water +inhibitors/promoters, gas + water + hydrophilic/hydrophobic surface), the effects of nanobubble evolution on nucleation, dissociation, reformation process and "memory effect" of gas hydrates are discussed in this paper. Researches on the nanobubbles in hydrate process are also summarized and prospected in this study.
|
|
| 21. |
- Zhao, Ruikai, et al.
(author)
-
Techno-economic analysis of carbon capture from a coal-fired power plant integrating solar-assisted pressure-temperature swing adsorption (PTSA)
- 2019
-
In: Journal of Cleaner Production. - : ELSEVIER SCI LTD. - 0959-6526 .- 1879-1786. ; 214, s. 440-451
-
Journal article (peer-reviewed)abstract
- This paper presents a techno-economic study to seek the feasibility about the proposed system that integrating solar-assisted pressure-temperature swing adsorption (PTSA) into an 800MWe coal-fired power plant. Solar energy has the potential to supply thermal energy demand for carbon capture, which can avoid the energy consumption of the traditional method such as the steam extraction. The performance of the proposed system is largely affected by the climatic conditions and solar collector's types. The assessment criteria include carbon emission intensity (CEO, levelized cost of electricity (LCOE) and cost of CO2 avoidance (COA). By the parametric analysis, the results show that CEI of the novel system with solar thermal collectors is approximately 2g/kWh lower than that of the referenced power plant with CO2 adsorption capture. In addition, CEI of the novel system can be further decrease with the decline of desorption temperature, adsorption pressure and desorption pressure. For the sake of lower LCOE and COA, the prices of the power plant capacity, adsorbents and solar collectors should be reduced. Specifically, LCOE of the system with evacuated tube collector will be lower than that of the reference system with CO2 capture as the price of solar field is lower than 46.08 USD/m2.
|
|
| 22. |
- Zhao, Ruikai, et al.
(author)
-
Thermodynamic exploration of temperature vacuum swing adsorption for direct air capture of carbon dioxide in buildings
- 2019
-
In: Energy Conversion and Management. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0196-8904 .- 1879-2227. ; 183, s. 418-426
-
Journal article (peer-reviewed)abstract
- Abrupt climate change such as the loss of Arctic sea-ice area urgently needs negative emissions technologies. The potential application of direct air capture of carbon dioxide from indoor air and outdoor air in closed buildings or crowded places has been discussed in this paper. From the aspects of carbon reduction and indoor comfort, the ventilation system integrating a capture device is of great value in practical use. For ultra-dilute carbon dioxide sources, many traditional separation processes have no cost advantages, but adsorption technologies such as temperature vacuum swing adsorption is one of suitable methods. Thermodynamic exploration has been investigated regarding minimum separation work and second-law efficiency at various concentrations in the air. The influence of concentration, adsorption temperature, desorption temperature and desorption pressure on the energy efficiency has also been evaluated. Results show that the minimum separation work for the level of 400 ppm is approximately 20 kJ/mol. The optimal second-law efficiencies are 44.57%, 37.55% and 31.60%, respectively for 3000 ppm, 2000 ppm and 1000 ppm. It means that a high energy-efficiency capture device in buildings merits attention in the exploration of the possibility of approaching negative carbon buildings.
|
|
| 23. |
- Zhou, Yue, et al.
(author)
-
Stabilized and Controlled Release of Radicals within Copper Formate-Based Nanozymes for Biosensing
- 2023
-
In: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 15:37, s. 43431-43440
-
Journal article (peer-reviewed)abstract
- Fenton-like radical processes are widely utilized to explain catalytic mechanisms of peroxidase-like nanozymes, which exhibit remarkable catalytic activity, cost-effectiveness, and stability. However, there is still a need for a comprehensive understanding of the formation, stabilization, and transformation of such radicals. Herein, a copper formate-based nanozyme (Cuf-TMB) was fabricated via a pre-catalytic strategy under ambient conditions. The as-prepared nanozyme shows comparable catalytic activity (K-m, 1.02 x 10(-5) mM(-1); K-cat, 3.09 x 10(-2) s(-1)) and kinetics to those of natural peroxidase toward H2O2 decomposition. This is attributed to the feasible oxidation by *OH species via the *O intermediate, as indicated by density functional theory calculations. The key .OH radicals were detected to be stable for over 52 days and can be released in a controlled manner during the catalytic process via in situ electron spin-resonance spectroscopy measurements. Based on the understanding, an ultrasensitive biosensing platform was constructed for the sensitive monitoring of biochemical indicators in clinic settings.
|
|
