1. |
- Eng, Frida, 1977-, et al.
(author)
-
Frequency Analysis using Non-Uniform Sampling with Application to Active Queue Management
- 2004
-
In: Proceedings of the 2004 IEEE International Conference on Acoustics, Speech and Signal Processing. - Linköping : Linköping University Electronic Press. - 0780384849 ; , s. 581-584
-
Conference paper (peer-reviewed)abstract
- In many real-time applications, sample values and time stamps are delivered in pairs, where sampling times are non-uniform. Frequency analysis using non-uniform data occurs in various real life problems and embedded systems, such as vibrational analysis in cars and control of packet network queue lengths. Our contribution is to first overview different ways to approximate the Fourier transform, and secondly to give analytical expressions for how non-uniform sampling affects these approximations. The results are expressed in terms of frequency windows describing how a single frequency in the continuous time signal is smeared out in the frequency domain, or, more precisely, in the expected value of the Fourier transform approximation.
|
|
2. |
- Gunnarsson, Frida, et al.
(author)
-
Issues on Performance Measurements of TCP
- 2003
-
Reports (other academic/artistic)abstract
- Due to the rapid growth of the Internet and the use of packet data traffic, the communication world has to find ways of improving performance of this traffic. New areas of use include, e.g., radio transmissions and real time data. This work discusses some issues of performance when using TCP and also present some of the measures that are used today. Furthermore we discuss this matter from the perspective of a bottleneck queue and present a measure that can be used from that viewpoint in the network. This measure is illustrated by comparing two versions of TCP and form the basis for a discussion of what models will be needed to actually achieve the goals that we have. A control structure is presented and using simulations and a control interpretation we note that RED introduces an implicit wanted steady state value of the queue length. We use the dropping of packets as a control signal and the output signal is the queue length.
|
|
3. |
- Gunnarsson, Fredrik, et al.
(author)
-
Signal processing : exercises
- 2010. - 1
-
Book (other academic/artistic)abstract
- This book provides signal processing exercises and can with advantage be used together with the text book Signal Processing by Fredrik Gustafsson, Lennart Ljung and Mille Millnert. The chapters of the books are aligned, which means that there are matching exercises to each theory chapter. The first part of the book treats classical digital signal processing based on transforms and filters, while model based digital processing is in focus in the second part. Some exercises are more theoretical and solved by hand, while others are intended for Matlab on a computer. The book material is inspired by real problems, and so are the exercises. This is emphasized by the use of data sets, both simulated and real. Most exercises have complete solutions, and a section with hints provides guidance to some exercises. Selected exercises also result in a Matlab function corresponding to specific signal processing algorithms. These functions are used to solve other exercises. Thereby, the reader gradually build up a signal processing toolbox during the studies of the material. The book homepage contains more information and links to access the matlab functions, data sets and examples used in the book. Main book Signal Processing
|
|
4. |
- Gustafsson, Fredrik, et al.
(author)
-
Aspects on Performance Measurements of TCP Traffic and Its Reflection into Control Theory
- 2002
-
In: Proceedings of Reglermöte 2002.
-
Conference paper (other academic/artistic)abstract
- One of the challenges of the communication world today is to improve the performance of Internet traffic for the changing traffic scenarios of today, e.g., radio transmissions. This leaves us with the question of what good performance is and how we measure it. This work will discuss some issues of performance when using TCP and also present some of the measures that are used today. We will then discuss this matter from the perspective of a bottleneck queue and present a measure that can be used from that view point in the network. This measure is illustrated by comparing two versions of TCP and is used as a base for a discussion of what models will be needed to actually achieve the goals that we have. A control structure is presented that currently is used as a base for the development of a mathematical description of the system. We use the dropping of packets as a control signal, as is done by e.g. ~ RED, and the output signal is the queue length.
|
|
5. |
- Gustafsson, Fredrik, et al.
(author)
-
Issues on Performance Measurements of TCP
- 2002
-
In: Proceedings of Radiovetenskap och Kommunikation 2002.
-
Conference paper (other academic/artistic)abstract
- Due to the rapid growth of the Internet and the use of packet data traffic, the communication world has to find ways of improving performance of this traffic. New areas of use include, e.g., radio transmissions and real time data. This work discusses some issues of performance when using TCP and also present some of the measures that are used today. Furthermore we discuss this matter from the perspective of a bottleneck queue and present a measure that can be used from that viewpoint in the network. This measure is illustrated by comparing two versions of TCP and form the basis for a discussion of what models will be needed to actually achieve the goals that we have. A control structure is presented and using simulations and a control interpretation we note that RED introduces an implicit wanted steady state value of the queue length. We use the dropping of packets as a control signal and the output signal is the queue length.
|
|
6. |
- Gustafsson, Fredrik, et al.
(author)
-
Radio Access Network (UTRAN) Modeling for Heterogenous Network Simulations, A Brief Description
- 2003
-
In: Proceedings of the 1st Swedish National Computer Networking Workshop. - Linköping : Linköping University Electronic Press.
-
Conference paper (peer-reviewed)abstract
- The vision of mobile Internet comprises heterogeneous networks with both wired and wireless infrastructures. The network parts are typically radio access network, core network, service network, Internet, etc. Due to the multitude of nodes and users in such networks and the complicated nature of layered communications protocols, performance analysis through simulations is crucial. The open source network simulation tool, ns-2, is widely used for simulating the behavior of wired, routed networks. This work adds modules to model radio access network nodes that emulate typical behavior of UTRAN (UMTS Terrestrial Radio Access Network) - the 3G standard opted for in Europe and Japan. Furthermore, data communication examples illustrate typical behavior of such a heterogenous network.
|
|
7. |
- Gustafsson, Fredrik, et al.
(author)
-
TCP Performance based on Queue Occupation
- 2001
-
In: Proceedings of the 2001 Nordic Radio Symposium. - Linköping : Linköping University Electronic Press.
-
Conference paper (peer-reviewed)abstract
- The main protocol for flow and congestion control on the Internet is the Transmission Control Protocol, TCP. This protocol was constructed and developed based on heuristic arguments, and its main purpose is to prevent network congestion. Because of changes in the character of the Internet traffic, TCP does not work as well as when it was designed - a problem that has been addressed by researchers in different ways. In this contribution, the bad performance of TCP will be illustrated using queue occupation. Simulations have been made using a simple simulation testbed implemented in the Matlab tools Simulink and StateFlow, as well as a more complex environment in a simulator developed at Berkeley called ns-2. It is seen that a modified TCP implementation yields significant performance improvements.
|
|
8. |
- Gustafsson, Fredrik, et al.
(author)
-
TCP Performance based on Queue Occupation
- 2001
-
In: Proceedings of the Third Conference on Computer Science and Systems Engineering. ; , s. 127-134
-
Conference paper (peer-reviewed)abstract
- The main protocol for flow and congestion control on the Internet is the Transmission Control Protocol, TCP. This protocol was constructed and developed based on heuristic arguments, and its main purpose is to prevent network congestion. Because of shifts in the Internet traffic, TCP does not work as well as when it was designed - a problem that has been addressed by researchers in different ways. We will illustrate the bad performance using the queue occupancy and also show that a proposed feedback scheme improves the performance, in a simulation environment.
|
|
9. |
- Bergström, Andreas, 1978-
(author)
-
Timing-Based Localization using Multipath Information
- 2020
-
Licentiate thesis (other academic/artistic)abstract
- The measurements of radio signals are commonly used for localization purposes where the goal is to determine the spatial position of one or multiple objects. In realistic scenarios, any transmitted radio signal will be affected by the environment through reflections, diffraction at edges and corners etc. This causes a phenomenon known as multipath propagation, by which multiple instances of the transmitted signal having traversed different paths are heard by the receiver. These are known as Multi-Path Components (MPCs). The direct path (DP) between transmitter and receiver may also be occluded, causing what is referred to as non-Line-of-Sight (non-LOS) conditions. As a consequence of these effects, the estimated position of the object(s) may often be erroneous.This thesis focuses on how to achieve better localization accuracy by accounting for the above-mentioned multipath propagation and non-LOS effects. It is proposed how to mitigate these in the context of positioning based on estimation of the DP between transmitter and receiver. It is also proposed how to constructively utilize the additional information about the environment which they implicitly provide. This is all done in a framework wherein a given signal model and a map of the surroundings are used to build a mathematical model of the radio environment, from which the resulting MPCs are estimated.First, methods to mitigate the adverse effects of multipath propagation and non-LOS conditions for positioning based on estimation of the DP between transmitter and receiver are presented. This is initially done by using robust statistical measurement error models based on aggregated error statistics, where significant improvements are obtained without the need to provide detailed received signal information. The gains are seen to be even larger with up-to-date real-time information based on the estimated MPCs.Second, the association of the estimated MPCs with the signal paths predicted by the environmental model is addressed. This leads to a combinatorial problem which is approached with tools from multi-target tracking theory. A rich radio environment in terms of many MPCs gives better localization accuracy but causes the problem size to grow large—something which can be remedied by excluding less probable paths. Simulations indicate that in such environments, the single best association hypothesis may be a reasonable approximation which avoids the calculation of a vast number of possible hypotheses. Accounting for erroneous measurements is crucial but may have drawbacks if no such are occurring.Finally, theoretical localization performance bounds when utilizing all or a subset of the available MPCs are derived. A rich radio environment allows for good positioning accuracy using only a few transmitters/receivers, assuming that these are used in the localization process. In contrast, in a less rich environment where basically only the DP/LOS components are measurable, more transmitters/receivers and/or the combination of downlink and uplink measurements are required to achieve the same accuracy. The receiver’s capability of distinguishing between multiple MPCs arriving approximately at the same time also affects the localization accuracy.
|
|
10. |
- Bergström, Andreas, 1978-, et al.
(author)
-
TOA Estimation Improvements in Multipath Environments by Measurement Error Models
- 2017
-
In: Proceedings of the 2017 IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC). - : Institute of Electrical and Electronics Engineers (IEEE). - 9781538635315 - 9781538635308 ; , s. 1-8
-
Conference paper (peer-reviewed)abstract
- Many positioning systems rely on accuratetime of arrival measurements. In this paper, we addressnot only the accuracy but also the relevance of Time ofArrival (TOA) measurement error modeling. We discusshow better knowledge of these errors can improve relativedistance estimation, and compare the impact of differentlydetailed measurement error information. These models arecompared in simulations based on models derived froman Ultra Wideband (UWB) measurement campaign. Theconclusion is that significant improvements can be madewithout providing detailed received signal information butwith a generic and relevant measurement error model.
|
|
11. |
- Blom, Jonas, et al.
(author)
-
A New Concept of Power Control in Cellular Systems Reflecting Challenges of Today's Systems
- 1999
-
Reports (other academic/artistic)abstract
- When the systems evolved from analog to digital, the performance was improved by the use of power control on the one hand and different modulations and coding schemes on the other. Condensing the available information we are able to propose a new concept of power control. The concept is applicable to real systems, since it uses the available measurements for estimating parameters necessary for the power control. It also supports the use of an adequate quality measure together with a quality specification supplied by the operator. We will use frequency hopping GSM as an example and the resulting control algorithm is ready for implementation in the software in the base stations where the output powers are computed. No modifications are needed in the GSM standard, the mobile terminals, the radio interfaces or in the base station transmitters. Finally we provide simulation results confirming the benefits of using the new concept for power control.
|
|
12. |
- Blom, Jonas, et al.
(author)
-
Method and System for Quality-Based Power Control in Cellular Communications Systems
- 2002
-
Patent (pop. science, debate, etc.)abstract
- A method and system for quality-based transmission power control in a cellular communications system (100) are disclosed, whereby a network operator can specify the transmission quality requirements using a measurement that better reflects the actual quality perceived by the users. All transmitter power levels in the network can be controlled by identical power regulators (200), each of which can adapt to individual traffic situations in order to achieve the specified quality. For example, in a GSM frequency-hopping network, the FER together with the parameters estimated from the current traffic situation (54), are mapped onto a target C/I (56), which in turn, the power control algorithm strives (16) to achieve (58, 60). Consequently, the power regulators can adapt to the traffic situation experienced by each receiver.
|
|
13. |
- Blom, Jonas, et al.
(author)
-
Pole Placement Design of Power Control Algorithms
- 1999
-
In: Proceedings of the 49th IEEE Vehicular Technology Conference. - Linköping : Linköping University Electronic Press. - 0780355652
-
Conference paper (peer-reviewed)abstract
- Time delays reduces the performance of any controlled system. If neglected in the design phase, the system may even become unstable when using the designed controller. Several power control strategies have been proposed in order to improve the capacity of cellular radio systems, but time delays are usually neglected. Here, it is shown that the problems can be handled by considering the time delays in the design phase in order to choose the appropriate parameter values. Most popular algorithms can be seen as special cases of an integrating controller. This structure is extended first to a proportional integrating (PI)-controller and then further on to a general linear controller of higher orders. Corresponding design procedures are outlined based on techniques, such as pole placement, from the field of automatic control. The PI-controller is a very appealing choice of structure, with better performance compared to an I-controller and less complex than a higher order controller. The benefits are further illuminated by network simulations.
|
|
14. |
|
|
15. |
- DAWODY, JAZAER, 1959, et al.
(author)
-
An integrated system for energy-efficient exhaust aftertreatment for heavy-duty vehicles
- 2015
-
In: Renewable Energy in the Service of Mankind. - Cham : Springer International Publishing. - 9783319177779 - 9783319177762 ; 1, s. 133-143
-
Book chapter (other academic/artistic)abstract
- © Springer International Publishing Switzerland 2015. This chapter presents a unique system approach applied in a joint academic- industrial research programme, E4 Mistra, to attain the goals of high energy efficiency and low emissions in an exhaust aftertreatment system for heavy-duty vehicles. The high energy efficiency is achieved by heat recuperation, onboard hydrogen production for NOx reduction, and by finding new solutions for making the aftertreatment system active at low exhaust temperatures. To reach low particulate emissions, a mechanical filter using a sintered metal powder is developed and coated with catalytic material to improve the soot oxidation efficiency. Low NOx emissions are achieved by an efficient NOx reduction catalyst. The integrated E4 Mistra system comprises four technological advances: thermoelectric (TE) materials for heat recuperation, catalytic reduction of NOx over innovative catalyst substrates using either the onboard diesel or biodiesel, H2 from a high-efficiency fuel reformer, and particulate filtration over a porous metal filter. The TE materials are used in a TE generator (TEG) which converts thermal energy into electricity. The TEG is used to recuperate heat from the exhaust-gas recirculation (EGR) circuit of heavy-duty trucks and is expected to generate ~1 kW electric power from 20 kW heat in the exhaust gas. The TEG is integrated in a plate heat exchanger (HEX) designed particularly for this application. Apart from the knowledge and experiences in TEG and heat exchange technologies, a thorough fluid dynamics and TE analysis are performed in this project to understand the governing processes and optimize the system accordingly. The components of the E4 Mistra system are explained in the chapter in addition to test results, which show the system's capacity for H2 production, NOx conversion, particulate matter filtration and soot oxidation, and finally electric power generation via heat recuperation from the exhaust gas using the developed TEG-HEX system.
|
|
16. |
- Eng, Frida, et al.
(author)
-
Frequency Domain Analysis of Signals with Stochastic Sampling Times
- 2007
-
Reports (other academic/artistic)abstract
- In nonuniform sampling (NUS), signal amplitudes and time stamps are delivered in pairs. Several methods to compute an approximate Fourier transform (AFT) have appeared in literature, and their posterior properties in terms of alias suppression and leakage have been addressed. In this paper, the sampling times are assumed to be generated by a stochastic process. The main result gives the prior distribution of several AFTs expressed in terms of the true Fourier transform and variants of the characteristic function of the sampling time distribution. The result extends leakage and alias suppression with bias and variance terms due to NUS. Specific sampling processes as described in literature are analyzed in detail. The results are illustrated on simulated signals, with particular focus to the implications for spectral estimation.
|
|
17. |
- Eng, Frida, et al.
(author)
-
Frequency Domain Analysis of Signals with Stochastic Sampling Times
- 2008
-
In: IEEE Transactions on Signal Processing. - : IEEE Signal Processing Society. - 1053-587X .- 1941-0476. ; 56:7, s. 3089-3099
-
Journal article (peer-reviewed)abstract
- In nonuniform sampling (NUS), signal amplitudes and time stamps are delivered in pairs. Several methods to compute an approximate Fourier transform (AFT) have appeared in literature, and their posterior properties in terms of alias suppression and leakage have been addressed. In this paper, the sampling times are assumed to be generated by a stochastic process. The main result gives the prior distribution of several AFTs expressed in terms of the true Fourier transform and variants of the characteristic function of the sampling time distribution. The result extends leakage and alias suppression with bias and variance terms due to NUS. Specific sampling processes as described in literature are analyzed in detail. The results are illustrated on simulated signals, with particular focus to the implications for spectral estimation.
|
|
18. |
- Geijer Lundin, Erik, et al.
(author)
-
Adaptive Filtering Applied to an Uplink Load Estimate in WCDMA
- 2003
-
In: Proceedings of the 57th IEEE Semiannual Vehicular Technology Conference. - Linköping : Linköping University Electronic Press. - 0780377575 ; , s. 452-456
-
Conference paper (peer-reviewed)abstract
- In the uplink of a WCDMA system, a natural choice of resource quantity is the uplink noise rise, i.e., total received power over noise power. Unfortunately this quantity is hard to measure and estimates are often noisy. This paper focuses on relative load which is closely related to the noise rise. Model-based signal processing with change detection techniques is herein used to suppress noise and minor oscillations while being alert on fast load changes. The time varying model identified in the process can also be used for prediction of future values, something which resource management algorithms can benefit from.
|
|
19. |
- Geijer Lundin, Erik, et al.
(author)
-
Robust Uplink Resource Allocation in CDMA Cellular Radio Systems
- 2005
-
In: Proceedings of the 44th IEEE Conference on Decision and Control and European Control Conference 2005. - Linköping : Linköping University Electronic Press. - 0780395670 ; , s. 1848-1853
-
Conference paper (peer-reviewed)abstract
- Radio resource management (RRM) in cellular radio system is an example of automatic control. The system performance may be increased by introducing decentralization, shorter delays and increased adaptation to local demands. However, it is hard to guarantee system stability without being, too conservative while using decentralized resource management. In this paper, two algorithms that both guarantee system stability and use local resource control are proposed for the uplink (mobile to base station). While one of the algorithms uses only local decisions, the other uses a central node to coordinate resources among different local nodes. In the chosen design approach, a feasible solution to the optimization problems corresponds to a stable system. Therefore, the algorithms will never assign resources that lead to an unstable system. Simulations indicate that the proposed algorithms also provide high capacity at any given uplink load level.
|
|
20. |
- Geijer Lundin, Erik, et al.
(author)
-
Uplink Load Estimates in WCDMA with Different Availability of Measurements
- 2003
-
In: Proceedings of the 57th IEEE Semiannual Vehicular Technology Conference. - Linköping : Linköping University Electronic Press. - 0780377575 ; , s. 1198-1202 vol.2
-
Conference paper (peer-reviewed)abstract
- In the uplink of a WCDMA system, a natural choice of resource management control quantity is the uplink noise rise, i.e., total received power over noise power. Unfortunately this quantity is hard to measure. In this paper, we propose and evaluate a number of noise rise estimates which all rely on path gain measurements. These measurements can be made available either periodically or event-driven as described in 3GPP (Release 99). Simulations show that event-driven measurements yield comparable performance to periodic measurements, but with much fewer measurement reports. Despite severely limited path gain knowledge due to that some users report to another RNC, we still manage to estimate the uplink noise rise reasonably well.
|
|
21. |
- Geijer Lundin, Erik, et al.
(author)
-
Uplink Load Estimation in WCDMA
- 2003
-
In: Proceedings of the 2003 IEEE Wireless Communications and Networking. - 0780377001 ; , s. 1669-1674 vol.3
-
Conference paper (peer-reviewed)abstract
- All cellular radio systems have radio resource management algorithms which rely on some sort of resource quantity. In the uplink of a WCDMA system, a natural choice of such a quantity is the uplink noise rise, i.e., total received power over noise power. Unfortunately this quantity is hard to measure. In this paper, we propose and evaluate four different noise rise 711 estimates. The best performing estimate provides an average error of less than 1 dB for practical load levels. Due to low standard deviation of single estimates it is possible to apply a simple error correction algorithm.
|
|
22. |
- Geijer Lundin, Erik
(author)
-
Uplink Load in CDMA Cellular Systems
- 2003
-
Licentiate thesis (other academic/artistic)abstract
- Cellular mobile systems designed to handle multimedia services are currently being developed. The primary goal for any mobile system is to provide a satisfactory quality of service, both to operators and customers. Providing good quality of service while maintaining system stability requires accurate knowledge of the system load. In particular, it is important to be able to predict how a resource management decision will affect the stability of the network. This thesis addresses the problem of characterizing and estimating the uplink load in a cellular system using CDMA (Code Division Multiple Access) in the radio interface.Uplink load can be related directly to the uplink power control problem of finding transmitter powers to support the users' quality of service requirements. This yields a rather theoretical view. Another way of looking at uplink load is to relate it to the total received power users induce in the base station antennas. Both of these views are handled and relations between them are established in this thesis.The literature survey on uplink load provided in this work concludes that practical estimates of the uplink load are generally what can be referred to as decentralized estimates; they use information gathered only in the immediate vicinity of the estimates' host node. As an alternative to these estimates, a number of centralized estimates based on information readilyavailable to the system are proposed. The usage of information from several cells makes them more sensitive to the soft capacity inherent in all CDMA cellular systems.Extensive simulations in an advanced WCDMA (Wideband Code Division Multiple Access) simulator show that the estimates statistically perform well and the performance is insensitive to non uniform traffic load.In the time domain, the load approximation can be described as oscillations superimposed on a slowly varying bias. If occasional high loads can be accepted, a non-oscillative signal representing the uplink load can be used to further increase the utilization of the resources. An algorithm is proposed to estimate the bias and a prediction of it.
|
|
23. |
- Gillman, Anna, et al.
(author)
-
Oseltamivir-Resistant Influenza A (H1N1) Virus Strain with an H274Y Mutation in Neuraminidase Persists without Drug Pressure in Infected Mallards
- 2015
-
In: Applied and Environmental Microbiology. - : American Society for Microbiology. - 0099-2240 .- 1098-5336. ; 81:7, s. 2378-2383
-
Journal article (peer-reviewed)abstract
- Influenza A virus (IAV) has its natural reservoir in wild waterfowl and emerging human IAVs often contain gene segments from avian viruses. The active drug metabolite of oseltamivir (oseltamivir carboxylate (OC)), stockpiled as Tamiflu® for influenza pandemic preparedness, is not removed by conventional sewage treatment and has been detected in river water. There, it may there exert evolutionary pressure on avian IAV in waterfowl, resulting in development of resistant viral variants. A resistant avian IAV can circulate among wild birds only if resistance does not restrict viral fitness and if the resistant virus can persist without continuous drug pressure. In this in vivo Mallard (Anas platyrhynchos) study we tested if an OC-resistant avian IAV strain (A(H1N1)/NA-H274Y) could retain resistance while drug pressure was gradually removed. Successively infected Mallards were exposed to decreasing levels of OC, and fecal samples were analyzed for neuraminidase sequence and phenotypic resistance. No reversion to wild-type virus was observed during the experiment, which included 17 days of viral transmission in 10 ducks exposed to OC concentrations below resistance induction levels. We conclude that resistance in avian IAV, induced by OC exposure of the natural host, can persist in absence of the drug. Thus, there is a risk that human pathogenic IAVs that evolve from IAVs circulating among wild birds may contain resistance mutations. An oseltamivir resistant pandemic IAV would be a substantial public health threat. Therefore, our observations underscore the need for prudent oseltamivir use, upgraded sewage treatment and resistance surveillance of IAV in wild birds.
|
|
24. |
- Gunnarsson, Anders, 1981, et al.
(author)
-
Affinity Capturing and Surface Enrichment of a Membrane Protein Embedded in a Continuous Supported Lipid Bilayer
- 2016
-
In: ChemistryOpen. - : Wiley. - 2191-1363. ; 5:5, s. 445-449
-
Journal article (peer-reviewed)abstract
- Investigations of ligand-binding kinetics to membrane proteins are hampered by their poor stability and low expression levels, which often translates into sensitivity-related limitations impaired by low signal-to-noise ratios. Inspired by affinity capturing of water-soluble proteins, which utilizes water as the mobile phase, we demonstrate affinity capturing and local enrichment of membrane proteins by using a fluid lipid bilayer as the mobile phase. Specific membrane-protein capturing and enrichment in a microfluidic channel was accomplished by immobilizing a synthesized trivalent nitrilotriacetic acid (tris-NTA)-biotin conjugate. A polymer-supported lipid bilayer containing His(6)-tagged b-secretase (BACE) was subsequently laterally moved over the capture region by using a hydrodynamic flow. Specific enrichment of His(6)-BACE in the Ni2+-NTA-modified region of the substrate resulted in a stationary three-fold increase in surface coverage, and an accompanied increase in ligand-binding response.
|
|
25. |
- Gunnarsson, Anders, 1981, et al.
(author)
-
Drug Discovery at the Single Molecule Level: Inhibition-in-Solution Assay of Membrane-Reconstituted beta-Secretase Using Single-Molecule Imaging
- 2015
-
In: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 87:8, s. 4100-4103
-
Journal article (peer-reviewed)abstract
- Inhibition-in-solution assays (ISA) employing surface-based biosensors such as surface plasmon resonance (SPR) are an effective screening approach in drug discovery. However, analysis of potent binders remains a significant hurdle due to limited sensitivity and accompanied depletion of the inhibiting compounds due to high protein concentrations needed for detectable binding signals. To overcome this limitation, we explored a microscopy-based single-molecule ISA compatible with liposome-reconstituted membrane proteins. Using a set of validated small molecule inhibitors against beta-secretase 1 (BACE1), the assay was benchmarked with respect to sensitivity and dynamic range against SPR. We demonstrate that the dynamic range of measurable affinities is greatly extended by more than 2 orders of magnitude as compared to SPR, thus facilitating measurements of highly potent (K-d
|
|
26. |
- Gunnarsson, Fredrik, et al.
(author)
-
A Concept of Power Control in Cellular Radio Systems
- 1999
-
In: Proceedings of the 14th World Congress. - Linköping : Linköping University Electronic Press. - 9780080432137
-
Conference paper (peer-reviewed)abstract
- Due to the rapid expansion of the cellular radio systems market, and the need for wireless multimedia services, the available resources have to be utilized efficently. A common strategy is to control the transmitter powers of the mobiles and base stations. However, when applying power control to real systems, a number of challenges are prevalent. The performance is limited by time delays, nonlinearities and the availability of measurements and adequate quality measures. In this paper we present a Power Regulator concept, which comprises an Unknown Input Observer, a Quality Mapper and a Power Control Algorithm. The applicability of the concept is exemplified using frequency hopping GSM, and simulations indicate benefits of employing the proposed concept.
|
|
27. |
- Gunnarsson, Fredrik, et al.
(author)
-
Control Theory Aspects of Power Control in UMTS
- 2003
-
In: Control Engineering Practice. - : Elsevier. - 0967-0661 .- 1873-6939. ; 11:10, s. 1113-1125
-
Journal article (peer-reviewed)abstract
- The global communication systems critically rely on control algorithms of various kinds. In universal mobile telephony system (UMTS)-the third generation mobile telephony system just being launched-power control algorithms play an important role for efficient resource utilization. This survey article describes and discusses relevant aspects of UMTS power control with emphasis on practical issues, using an automatic control framework. Generally, power control of each connection is distributedly implemented as cascade control, with an inner loop to compensate for fast variations and an outer loop focusing on longer term statistics. These control loops are interrelated via complex connections, which affect important issues such as capacity, load and stability. Therefore, both local and global properties are important. The concepts and algorithms are illustrated by simple examples and simulations.
|
|
28. |
- Gunnarsson, Fredrik, et al.
(author)
-
Controlling Internet Queue Dynamics using Recursively Identified Models
- 2003
-
In: Proceedings of the 42nd IEEE Conference on Decision and Control. - Linköping : Linköping University Electronic Press. - 0780379241 ; , s. 593-597 vol.1
-
Conference paper (peer-reviewed)abstract
- Data traffic on the Internet of today is controlled by a non-linear controller (TCP) at each sender node, which increases packet transmission rate each time an acknowledgment is received in due time, and decreases otherwise. The routers may co-operate with TCP by deliberately dropping packets, so called early drops. The idea is to decrease packet arrival rate before the queue becomes full and hard drops of packets are necessary. State of the art is to compute the probability of an early drop as a static function of the (filtered) queue length. We propose to use an auto-regressive model for the oscillative behavior of the queue length that can be observed in practice. With this model, the queue length can be predicted and a dynamic algorithm for computing the early drop probability can be used. We suggest a very simple modification of existing algorithms, where a short-time prediction is used instead of the current queue value, and demonstrate using ns-2 simulations that the overall throughput increases.
|
|
29. |
- Gunnarsson, Fredrik, et al.
(author)
-
Dynamical Effects of Time Delays and Time Delay Compensation in Power Controlled DS-CDMA
- 2001
-
In: IEEE Journal on Selected Areas in Communications. - Linköping : Institute of Electrical and Electronics Engineers (IEEE). - 0733-8716 .- 1558-0008. ; 19:1, s. 141-151
-
Journal article (peer-reviewed)abstract
- Transmission power control is essential in systems of the third-generation (3G) in order to optimize the bandwidth utilization, which is critical when variable data rates are used. One remaining problem is oscillations in the output powers, due to round-trip delays in the power control loops together with the power up-down command device. The oscillations are naturally quantified using discrete time-describing functions, which are introduced and applied. More importantly, time-delay compensation (TDC) is proposed to mitigate the oscillations. When employing TDC, the power control algorithm exhibits greater stability, which is important from a network perspective. Simulations illustrate the oscillations and the benefits of TDC. Moreover, the fading tracking capability is improved, and thus, less fading margin is needed. The results apply not only to wideband code division multiple access (WCDMA), but to other direct-sequence (DS) CDMA systems power controlled in a similar manner as well.
|
|
30. |
- Gunnarsson, Fredrik, et al.
(author)
-
Dynamical Effects of Time Delays and Time Delay Compensation in Power Controlled WCDMA
- 1999
-
Reports (other academic/artistic)abstract
- Transmission power control is essential in WCDMA in order to optimize the bandwidth utilization which is critical when variable data ratesare used. One remaining problem is oscillations in the output powers due to round-trip delays in the power control loops together with the power up-down command device. The oscillations are naturally quantified using discrete-time describing functions, which are introduced and applied. More importantly, Time Delay Compensation (TDC) is proposed to mitigate the oscillations. When employing TDC, the power control algorithm operates more stable, which is important from a network perspective. Simulations illustrate the oscillations and the benefits of TDC. Moreover, the fading tracking capability is improved and thus less fading margin is needed. The latest news from standardization is to try to operate without additional delay when close to a base station. Nevertheless, there will still be more distant mobile stations for which TDC will be beneficial.
|
|
31. |
- Gunnarsson, Fredrik, et al.
(author)
-
Estimation and Outer Loop Power Control in Cellular Radio Systems
- 2001
-
Reports (other academic/artistic)abstract
- A common strategy to utilize available resources in cellular radio systems is to control the transmitter powers. However, when applying power control to real systems, a number of challenges are prevalent. Available information in measurement reports are crude and highly quantized. This paper utilizes point-mass approximations of probability density functions to implement nonlinear estimation of relevant parameters. Most popular power control algorithms track specified target signal-to-interference ratios (SIR:s), but the challenge is to control target values in an outer control loop. Here target SIR:s are provided by utilizing models of the relation between a relevant quality measure, such as frame erasure rate (FER), and the estimated parameters. This is an interesting alternative to outer loop strategies based on relatively infrequent frame error measurements. The discussed outer loop can also include handling of different priorities. The methods proposed in this work are applicable to a general system, but FH-GSM is used as the example throughout the paper. Illuminating simulations of a FH-GSM system illustrate the behavior and performance, which are considered acceptable. By using the proposed outer loop, capacity gains of up to 30% have been observed.
|
|
32. |
- Gunnarsson, Fredrik, et al.
(author)
-
Estimation of the Carrier-to-Interference Ratio in Cellular Radio Systems
- 1999
-
In: Proceedings of the 49th IEEE Vehicular Technology Conference. - Linköping : Linköping University Electronic Press. - 0780355652 ; , s. 1312-1316 vol.2
-
Reports (other academic/artistic)abstract
- The problem to track time-varying parameters in cellular radio systems is studied. The focus is on estimation based only on the signals that are readily available. Previous work has demonstrated very good performance relying on analog measurement. In a real system most of the information is lost due to quantization and sampling at a rate that might be as low as 2 Hz (GSM case). Therefore a different approach is required and for that matter a maximum likelihood estimator has been designed and exemplified in the case of GSM. The needed probability functions of the measurements cannot be described analytically. Instead point-mass approximations can be obtained from Monte-Carlo simulations for each point in a grid covering the interesting parameter space. The proposed algorithm can be tuned to track both slowly and fast varying parameters individually. Since most computations take place in the base stations, the estimator is ready for implementation in a second generation wireless system. No update of the software in the mobile stations is needed.
|
|
33. |
- Gunnarsson, Fredrik, et al.
(author)
-
Improved Performance Using Nonlinear Components in Power Control Algorithms
- 1999
-
In: Proceedings of the 49th IEEE Vehicular Technology Conference. - Linköping : Linköping University Electronic Press. - 0780355652 ; , s. 1276-1280 vol.2
-
Conference paper (peer-reviewed)abstract
- When employing power control algorithms in real systems there are anumber of problems that have to be considered, of which some are addressed in this work. It is probably impossible to solve the problems using a linear controller, and as an extension, various nonlinear components and their applicability are discussed. Problems due to hardware and external constraints have been identified in previous work, and here anti-reset windup techniques are reviewed and employed. Previous proposals can be seen as special cases. Sometimes it is desirable to employ several algorithms in parallel, and then use a device to state priorities, i.e., to switch between the algorithms. The applicability of switches and selectors are described and exemplified as proposed solutions to the low interference problem, where a C/I balancing algorithm causes a user to use a too low a power. The benefits of using the proposed nonlinear components are further illustrated by network simulations.
|
|
34. |
- Gunnarsson, Fredrik, et al.
(author)
-
MOSE - A Simulation Environment for Mobile Communications Systems
- 1998
-
Reports (other academic/artistic)abstract
- Thorough analytical analysis of cellular radio networks is difficult in general. Therefore simulation environments are adequate tools to gain understanding about the behaviour of algorithms used in cellular radio networks. In this report MOSE (MObile communications System Emulator) is described. The objective has been to develop an intuitive and user-friendly environment supported by a graphical user-interface. The implemented models include time-varying communication channels, co-channel interference, time delays and constraints. Several filtering and power control algorithms are implemented, and dedicated tests facilitate comparison with respect to different aspects.
|
|
35. |
- Gunnarsson, Fredrik, et al.
(author)
-
Parameter Estimation in Cellular Radio Systems
- 1999
-
In: Proceedings of the Second Conference on Computer Science and Systems Engineering.
-
Conference paper (other academic/artistic)abstract
- The problem to track time-varying parameters in cellular radio systems is studied. The focus is on estimation based only on the signals that are readily available. Previous work have demonstrated very good performance relying on analog measurement. In a real system most of the information is lost due to quantization and sampling at a rate that might be as low as 2 Hz (GSM case). Therefore a different approach is required and for that matter a Maximum Likelihood Estimator has been designed and exemplified in the case of GSM. The needed probability functions of the measurements cannot be described analytically. Instead point-mass approximations can be obtained from Monte-Carlo simulations for each point in a grid covering the interesting parameter space. The proposed algorithm can be tuned to track both slowly and fastly varying parameters individually. Since most computations take place in the base stations, the estimator is ready for implementation in a second generation wireless system. No update of the software in the mobile stations is needed.
|
|
36. |
- Gunnarsson, Fredrik, et al.
(author)
-
Particle filtering for network-based positioning terrestrial radio networks
- 2014
-
In: Data Fusion & Target Tracking 2014: Algorithms and Applications (DF&TT 2014), IET Conference on. - : Institution of Engineering and Technology. - 9781849198639
-
Conference paper (peer-reviewed)abstract
- There is strong interest in positioing in wireless networks, partly to support end user service needs, but also to support network management with network-based network information. The focus in this paper is on the latter, while using measurements that are readily available in wireless networks. We show how thesignal direction of departure and inter-distance between the base station and the mobile terminal can be estimated, and how particle filters and smoothers can be used to post-process the measurements. The methods are evaluated in a live 3GPP LTE network with promising results inlcuding position error medians of less than 100 m.
|
|
37. |
- Gunnarsson, Fredrik, et al.
(author)
-
Post-processing of drive test measurements using spatial filtering
- 2004
-
In: IEEE Vehicular Technology Conference (VTC) Proceedings. - : IEEE. - 1550-2252. ; 1, s. 79-83
-
Journal article (peer-reviewed)abstract
- Drive tests are important means to evaluate critical properties of a wireless network in operation. The network coverage is vital, and therefore, the received power of pilot signals from the base stations are monitored to estimate the spatial distributions and variations of the power gain. With uniform time-sampling and a varying velocity, the typical temporal filter fails to extract the interesting information. In this paper we apply convolutional spatial filtering, both causal and non-causal, to resolve the problem. Relations to spatial data analysis methods are also commented upon. Simulations indicate significant improvements.
|
|
38. |
- Gunnarsson, Fredrik, et al.
(author)
-
Power Control in Cellular Radio Systems : Analysis and Design
- 1999
-
In: Proceedings of the 1999 Radiovetenskap och Kommunikation. - 9789163081569
-
Conference paper (other academic/artistic)abstract
- Many algorithms in communications systems can be considered as control loops, where the computed quantities depend on feedback information. A common scheme is to use increase/decrease signaling for bandwidth efficiency. Furthermore, the feedback information is delayed. The time delay itself, and even more pronounced in combination with nonlinearities, such as the increase/decrease mechanism, may cause oscillations and instabilities in the system. In this work, analysis methods based on root locus and describing functions are discussed. Design and tuning of algorithms are employed using pole placement techniques. Particular examples include clock synchronization in ADSL modems, control of available bit rate in data networks and, as studied in this project, distributed implementation of power control in cellular radio systems. The relevance of the methods is further illuminated by simulations.
|
|
39. |
- Gunnarsson, Fredrik, et al.
(author)
-
Power Control in Cellular Radio Systems
- 2000
-
In: Proceedings of Reglermöte 2000.
-
Conference paper (other academic/artistic)abstract
- The primary goal of cellular radio systems is to provide communications services to a large number of mobile users. Due to the dramatic increase of this market, the available resources have to be utilized efficiently. Closed-loop power control is considered as an important component in these resource management algorithms. Here, relevant aspects on power control are discussed, using an automatic control framework. Generally, power control strategies are implemented as cascade control, with an inner loop to compensate for fast variations and an outer loop focusing on longer term statistics. Issues as capacity, load and stability are discussed and related to whether it is possible to accommodate the requirements of all users or not. The operation of such algorithms are illustrated by simulations.
|
|
40. |
- Gunnarsson, Fredrik
(author)
-
Power Control in Cellular Radio Systems : Analysis, Design and Estimation
- 2000
-
Doctoral thesis (other academic/artistic)abstract
- The primary goal of cellular radio systems is to provide communications services to a large number of mobile users. Due to the dramatic increase in number ofusers and their demand for more advanced services, the available resources haveto be utilized efficiently. Closed-loop power control is considered as an important component in this resource management.For practical reasons, the powers have to be computed locally for each connection, though performance and stability depend on how the different connections interact. We consider the power control problem as a decentralized control system, consisting of interconnected local control loops. Methods from control theory are used to analyze existing algorithms locally and to design controllers with improved performance. Thereby, performance degradation due to time delays and nonlinearities, can be handled by careful controller design. On a global level, we provide results on stability and convergence of the designed controllers. The results are illustrated by simulations using both small and large-scale simulation environments.
|
|
41. |
- Gunnarsson, Fredrik, et al.
(author)
-
Power Control in Cellular Systems Subject to Constraints and Time Delays
- 1999
-
Reports (other academic/artistic)abstract
- Stability is a fundamental property desirable for any controlled system. We briefly review the root locus and describing function techniques, which are tools for stability analysis, and show how they can be applied to power control algorithms in cellular radio networks. The root locus method is used to find stability limits on controller parameters, and describing functions for predicting the presence of oscillations in the system. Thus these methods can be used to support the design phase, when deciding upon the appropriate controller parameters. These tools are demonstrated for various control algorithms and when different smoothing filters are applied. The analysis reveals that the distributed power control (DPC) algorithm, which works fine under ideal circumstances, yields an unstable system when subject to a small time delay. Furthermore, it is concluded that the performance with respect to stability is better when the measurements are averaged by an exponential forgetting filter than by the moving average filter.
|
|
42. |
- Gunnarsson, Fredrik, et al.
(author)
-
Power Control with Time Delay Compensation
- 2000
-
In: Proceedings of the 52nd IEEE Vehicular Technology Conference. - Linköping : IEEE. - 0780365070 ; , s. 646-653
-
Conference paper (peer-reviewed)abstract
- Closed-loop power control is considered as an important component in the management of radio resources in cellular radio systems. The algorithms are typically based on feedback information, which for practical reasons is outdated. These time delays in the system, hamper the performance and might even result in unstable systems. Several power control strategies have been proposed in order to improve the capacity of cellular radio systems, but time delays are usually neglected. Here, time delay compensation is introduced as a means to improve the dynamical behavior of power controlled cellular systems, despite time delays. The improvements are validated both in theory with respect to global convergence and stability and in some illuminating simulations.
|
|
43. |
- Gunnarsson, Fredrik, et al.
(author)
-
Time Delay Compensation for CDMA Power Control
- 2000
-
In: Proceedings of the 2000 IEEE Global Telecommunications Conference. - Linköping : IEEE. - 0780364511 ; , s. 1504-1508
-
Conference paper (peer-reviewed)abstract
- Transmission power control is essential in CDMA systems in order to reduce the near-far effect and to optimize the bandwidth utilization, which is critical when variable data rates are used. One remaining problem is oscillations in the output powers due to round-trip delays in the power control loops together with the power up-down command device. The oscillations are naturally quantified using discrete-time describing functions, which are introduced and applied. More importantly, Time Delay Compensation (TDC) is proposed to mitigate the oscillations. It is also formally proven that TDC result in a stable overall system, with power control errors that converges to a defined bounded region. These bounds are tighter, compared to when not employing TDC. Simulations illustrate the oscillations and the significant performance gains using TDC.
|
|
44. |
- Gunnarsson, Fredrik, et al.
(author)
-
Time Delay Compensation in Power Controlled Cellular Radio Systems
- 2001
-
In: IEEE Communications Letters. - Linköping : Institute of Electrical and Electronics Engineers (IEEE). - 1089-7798 .- 1558-2558. ; 5:7, s. 295-297
-
Journal article (peer-reviewed)abstract
- Transmission power control is an important means to manage the radio resources in wireless communications. The performance, however, may be reduced due to time delays as in any controlled system. Most controllers to date are designed without considering time delays, which may result in oscillatory or unstable systems. To overcome these problems, time delay compensation (TDC) is introduced. The main idea is to adjust the measurements [e.g., signal-to-interference ratio (SIR)] to include the effects of issued but not yet applied power control commands. TDC thereby improves the stability and performance of an arbitrary power control algorithm. The benefits are illustrated by simulations using some popular power control algorithms.
|
|
45. |
- Gunnarsson, Fredrik, et al.
(author)
-
Transmit Power Control Time Delay Compensation in a Wireless Communications System
- 2002
-
Patent (pop. science, debate, etc.)abstract
- The present invention compensates for transmit power control time delays between a radio transmitter and receiver that adversely affect the transmit power control process. A time delay associated with a power control loop is compensated for by adjusting a detected signal quality value of a received signal, e.g., signal-to-interference ratio (SIR), based on one or more previous power control commands already sent but whose effect has not yet been experienced. Because the determined signal quality value of the received signal is adjusted based on one or more power control commands already sent but yet to take effect, the transmit power level control command is appropriately determined so that it also takes into account a power control loop time delay. The delay compensation value may be determined based on the output power of a single, previously generated transmit power control command, or on plural previously generated transmit power control commands, depending upon the length of the time delay. If the adjusted signal quality parameter exceeds the target signal quality parametery the generated power control command directs a decrease in transmit power, and the compensation factor causes a decrease in the subsequently determined signal quality parameter. If the adjusted signal quality parameter is less than the target signal quality parameter, the generated power control command directs an increase in transmit power, and the compensation factor causes an increase in the subsequently determined signal quality parameter.
|
|
46. |
- Gunnarsson, Fredrik, et al.
(author)
-
Uplink Load and Link Budget with Stochastic Noise Rise Levels in CDMA Cellular Systems
- 2005
-
In: Proceedings of Radiovetenskap och Kommunikation 2005. ; , s. 491-
-
Conference paper (other academic/artistic)abstract
- The limiting factor in the uplink of all CDMA cellular systems is the relation between uplink noise rise and intended coverage. In link budgets, noise rise is usually simply handled as a constant contribution to the background noise in logarithmic scale, often referred to as interference margin. In practice, however, it is not constant. We model the uplink noise rise as a lognormal distribution, and investigate the impact to link budgets. Simulations and numerical calculations show that the uplink noise rise variance does not critically affect the uplink capacity and coverage. System feasibility and its relation to the uplink load is also discussed. It is shown that approximative load expressions provides an upper bound on the uplink load and therefore they can be used to imply system feasibility. Furthermore, the uplink load expressions provide accurate approximations of the load given that the load is within the practical limits given by the link budgets.
|
|
47. |
- Gustafsson, Fredrik, et al.
(author)
-
A New Concept of Power Control in Cellular Systems Reflecting Challenges of Today's Systems
- 1998
-
In: Proceedings of the 1998 IEEE Global Telecommunications Conference. - 0780349849 ; , s. 2097-2102 vol.4
-
Conference paper (peer-reviewed)abstract
- When the systems evolved from analog to digital, the performance was improved by the use of power control on the one hand and different modulations and coding schemes on the other. Condensing the available information we are able to propose a new concept of power control. The concept is applicable to real systems, since it uses the available measurements for estimating parameters necessary for the power control. It also supports the use of an adequate quality measure together with a quality specification supplied by the operator. We will use frequency hopping GSM as an example and the resulting control algorithm is ready for implementation in the software in the base stations where the output powers are computed. No modifications are needed in the GSM standard, the mobile terminals, the radio interfaces or in the base station transmitters. Finally we provide simulation results confirming the benefits of using the new concept for power control.
|
|
48. |
|
|
49. |
|
|
50. |
- Gustafsson, Fredrik, et al.
(author)
-
Estimation in Cellular Radio Systems
- 1999
-
In: Proceedings of the 1999 IEEE International Conference on Acoustics, Speech, and Signal Processing. - Linköping : Linköping University Electronic Press. - 0780350413 ; , s. 2551-2554 vol.5
-
Conference paper (peer-reviewed)abstract
- The problem to track time-varying parameters in cellular radio systems is studied, and the focus is on estimation based only on the signals that are readily available. Previous work have demonstrated very good performance, but were relying on analog measurement that are not available. Most of the information is lost due to quantization and sampling at a rate that might be as low as 2 Hz (GSM case). For that matter a maximum likelihood estimator have been designed and exemplified in the case of GSM. Simulations indicate good performance both when most parameters are varying slowly, and when subject to fast variations as in realistic cases. Since most computations take place in the base stations, the estimator is ready for implementation in a second generation wireless system. No update of the software in the mobile stations is needed.
|
|