| 1. |
- Plompen, A. J. M., et al.
(author)
-
The joint evaluated fission and fusion nuclear data library, JEFF-3.3
- 2020
-
In: European Physical Journal A. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 56:7
-
Research review (peer-reviewed)abstract
- The joint evaluated fission and fusion nuclear data library 3.3 is described. New evaluations for neutron-induced interactions with the major actinides 235U, 238U and 239Pu, on 241Am and 23Na, 59Ni, Cr, Cu, Zr, Cd, Hf, W, Au, Pb and Bi are presented. It includes new fission yields, prompt fission neutron spectra and average number of neutrons per fission. In addition, new data for radioactive decay, thermal neutron scattering, gamma-ray emission, neutron activation, delayed neutrons and displacement damage are presented. JEFF-3.3 was complemented by files from the TENDL project. The libraries for photon, proton, deuteron, triton, helion and alpha-particle induced reactions are from TENDL-2017. The demands for uncertainty quantification in modeling led to many new covariance data for the evaluations. A comparison between results from model calculations using the JEFF-3.3 library and those from benchmark experiments for criticality, delayed neutron yields, shielding and decay heat, reveals that JEFF-3.3 performes very well for a wide range of nuclear technology applications, in particular nuclear energy.
|
|
| 2. |
- Sublet, J. -Ch., et al.
(author)
-
Neutron-induced damage simulations : Beyond defect production cross-section, displacement per atom and iron-based metrics
- 2019
-
In: The European Physical Journal Plus. - : Springer Berlin/Heidelberg. - 2190-5444. ; 134:7
-
Research review (peer-reviewed)abstract
- Nuclear interactions can be the source of atomic displacement and post-short-term cascade annealing defects in irradiated structural materials. Such quantities are derived from, or can be correlated to, nuclear kinematic simulations of primary atomic energy distributions spectra and the quantification of the numbers of secondary defects produced per primary as a function of the available recoils, residual and emitted, energies. Recoils kinematics of neutral, residual, charged and multi-particle emissions are now more rigorously treated based on modern, complete and enhanced nuclear data parsed in state of the art processing tools. Defect production metrics are the starting point in this complex problem of correlating and simulating the behaviour of materials under irradiation, as direct measurements are extremely improbable. The multi-scale dimensions (nuclear-atomic-molecular-material) of the simulation process is tackled from the Fermi gradation to provide the atomic- and meso-scale dimensions with better metrics relying upon a deeper understanding and modelling capabilities of the nuclear level. Detailed, segregated primary knock-on-atom metrics are now available as the starting point of further simulation processes of isolated and clustered defects in material lattices. This allows more materials, incident energy ranges and particles, and irradiations conditions to be explored, with sufficient data to adequately cover both standard applications and novel ones, such as advanced-fission, accelerators, nuclear medicine, space and fusion. This paper reviews the theory, describes the latest methodologies and metrics, and provides recommendations for standard and novel approaches.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Ghetti, R., et al.
(author)
-
Influence of multiple sources on the two-neutron correlation function in Ni-induced, intermediate energy, heavy ion reactions
- 2001
-
In: Physical Review C. Nuclear Physics. - : American Physical Society. - 0556-2813 .- 1089-490X. ; 64:1
-
Journal article (peer-reviewed)abstract
- The strength of the neutron-neutron correlation function from the E=45AMeV58Ni+27Al, natNi, and 197Au reactions depends on the neutron parallel velocity. This indicates the presence of multiple sources of neutron emission. We find these sources consistent with a dissipative, binary reaction mechanism as it is described by, e.g., Boltzmann-Uehling-Uhlenbeck calculations.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Moretto, L G, et al.
(author)
-
The complement: A solution to liquid drop finite size effects in phase transitions
- 2005
-
In: Physical Review Letters. - 1079-7114. ; 94:20
-
Journal article (peer-reviewed)abstract
- The effects of the finite size of a liquid drop undergoing a phase transition are described in terms of the complement, the largest (but mesoscopic) drop representing the liquid in equilibrium with the vapor. Vapor cluster concentrations, pressure, and density from fixed mean density lattice gas (Ising) calculations are explained in terms of the complement generalization of Fisher's model. Accounting for this finite size effect is important for extracting the infinite nuclear matter phase diagram from experimental data.
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
- Urrata, M, et al.
(author)
-
Neutron-neutron Intensity Interferometry in E/A = 45 MeV 58Ni + 27Al, 58Ni and 197Au Reactions
- 2000
-
In: Physical Review C. Nuclear Physics. - : American Institute of Physics (AIP). - 0556-2813 .- 1089-490X. ; 62
-
Journal article (peer-reviewed)abstract
- Small angle neutron-neutron correlations have been measured for the E/A=45 MeV 58Ni+27Al, natNi, and 197Au reactions. Two-neutron correlation functions, both integrated and gated on the total momentum of the neutron pair, have been constructed. In order to explain these data, a fraction of fast "dynamical" emission is needed in addition to slower evaporative emission. The overall emission time scale is shorter for the symmetric system, indicating that the dynamical component is stronger in this case.
|
|
| 13. |
- Alhassan, Erwin, et al.
(author)
-
Benchmark selection methodology for reactor calculations and nuclear data uncertainty reduction
- 2015
-
In: Annals of Nuclear Energy. - 0306-4549 .- 1873-2100.
-
Journal article (peer-reviewed)abstract
- Criticality, reactor physics and shielding benchmarks are expected to play important roles in GEN-IV design, safety analysis and in the validation of analytical tools used to design these reactors. For existing reactor technology, benchmarks are used for validating computer codes and for testing nuclear data libraries. Given the large number of benchmarks available, selecting these benchmarks for specic applications can be rather tedious and difficult. Until recently, the selection process has been based usually on expert judgement which is dependent on the expertise and the experience of the user and there by introducing a user bias into the process. This approach is also not suitable for the Total Monte Carlo methodology which lays strong emphasis on automation, reproducibility and quality assurance. In this paper a method for selecting these benchmarks for reactor calculation and for nuclear data uncertainty reduction based on the Total Monte Carlo (TMC) method is presented. For reactor code validation purposes, similarities between a real reactor application and one or several benchmarks are quantied using a similarity index while the Pearson correlation coecient is used to select benchmarks for nuclear data uncertainty reduction. Also, a correlation based sensitivity method is used to identify the sensitivity of benchmarks to particular nuclear reactions. Based on the benchmark selection methodology, two approaches are presented for reducing nuclear data uncertainty using integral benchmark experiments as an additional constraint in the TMC method: a binary accept/reject and a method of assigning file weights using the likelihood function. Finally, the methods are applied to a full lead-cooled fast reactor core and a set of criticality benchmarks. Signicant reductions in Pu-239 and Pb-208 nuclear data uncertainties were obtained after implementing the two methods with some benchmarks.
|
|
| 14. |
- Alhassan, Erwin, et al.
(author)
-
On the use of integral experiments for uncertainty reduction of reactor macroscopic parameters within the TMC methodology
- 2016
-
In: Progress in nuclear energy (New series). - : Elsevier BV. - 0149-1970 .- 1878-4224. ; 88, s. 43-52
-
Journal article (peer-reviewed)abstract
- The current nuclear data uncertainties observed in reactor safety parameters for some nuclides call for safety concerns especially with respect to the design of GEN-IV reactors and must therefore be reduced significantly. In this work, uncertainty reduction using criticality benchmark experiments within the Total Monte Carlo methodology is presented. Random nuclear data libraries generated are processed and used to analyze a set of criticality benchmarks. Since the calculated results for each random nuclear data used are different, an algorithm was used to select (or assign weights to) the libraries which give a good description of experimental data for the analyses of the benchmarks. The selected or weighted libraries were then used to analyze the ELECTRA reactor. By using random nuclear data libraries constrained with only differential experimental data as our prior, the uncertainties observed were further reduced by constraining the files with integral experimental data to obtain a posteriori uncertainties on the k(eff). Two approaches are presented and compared: a binary accept/reject and a method of assigning file weights based on the likelihood function. Significant reductions in (PU)-P-239 and Pb-208 nuclear data uncertainties in the k(eff) were observed after implementing the two methods with some criticality benchmarks for the ELELIRA reactor. (C) 2015 Elsevier Ltd. All rights reserved.
|
|
| 15. |
- Alhassan, Erwin, et al.
(author)
-
Reducing A Priori 239Pu Nuclear Data Uncertainty In The Keff Using A Set Of Criticality Benchmarks With Different Nuclear Data Libraries
- 2015
-
Conference paper (other academic/artistic)abstract
- In the Total Monte Carlo (TMC) method [1] developed at the Nuclear Research and Consultancy Group for nuclear data uncertainty propagation, model calculations are compared with differential experimental data and a specific a priori uncertainty is assigned to each model parameter. By varying the model parameters all together within model parameter uncertainties, a full covariance matrix is obtained with its off diagonal elements if desired [1]. In this way, differential experimental data serve as a constraint for the model parameters used in the TALYS nuclear reactions code for the production of random nuclear data files. These files are processed into usable formats and used in transport codes for reactor calculations and for uncertainty propagation to reactor macroscopic parameters of interest. Even though differential experimental data together with their uncertainties are included (implicitly) in the production of these random nuclear data files in the TMC method, wide spreads in parameter distributions have been observed, leading to large uncertainties in reactor parameters for some nuclides for the European Lead cooled Training Reactor [2]. Due to safety concerns and the development of GEN-IV reactors with their challenging technological goals, the present uncertainties should be reduced significantly if the benefits from advances in modelling and simulations are to be utilized fully [3]. In Ref.[4], a binary accept/reject approach and a more rigorous method of assigning file weights based on the likelihood function were proposed and presented for reducing nuclear data uncertainties using a set of integral benchmarks obtained from the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP). These methods are depended on the reference nuclear data library used, the combined benchmark uncertainty and the relevance of each benchmark for reducing nuclear data uncertainties for a particular reactor system. Since each nuclear data library normally comes with its own nominal values and covariance matrices, reactor calculations and uncertainties computed with these libraries differ from library to library. In this work, we apply the binary accept/reject approach and the method of assigning file weights based on the likelihood function for reducing a priori 239Pu nuclear data uncertainties for the European Lead Cooled Training Reactor (ELECTRA) using a set of criticality benchmarks. Prior and posterior uncertainties computed for ELECTRA using ENDF/B-VII.1, JEFF-3.2 and JENDL-4.0 are compared after including experimental information from over 10 benchmarks.[1] A.J. Koning and D. Rochman, Modern Nuclear Data Evaluation with the TALYS Code System. Nuclear Data Sheets 113 (2012) 2841-2934. [2] E. Alhassan, H. Sjöstrand, P. Helgesson, A. J. Koning, M. Österlund, S. Pomp, D. Rochman, Uncertainty and correlation analysis of lead nuclear data on reactor parameters for the European Lead Cooled Training reactor (ELECTRA). Annals of Nuclear Energy 75 (2015) 26-37. [3] G. Palmiotti, M. Salvatores, G. Aliberti, H. Hiruta, R. McKnight, P. Oblozinsky, W. Yang, A global approach to the physics validation of simulation codes for future nuclear systems, Annals of Nuclear Energy 36 (3) (2009) 355-361. [4] E. Alhassan, H. Sjöstrand, J. Duan, P. Helgesson, S. Pomp, M. Österlund, D. Rochman, A.J. Koning, Selecting benchmarks for reactor calculations: In proc. PHYSOR 2014 - The Role of Reactor Physics toward a Sustainable Future, kyoto, Japan, Sep. 28 - 3 Oct. (2014).
|
|
| 16. |
- Alhassan, Erwin, et al.
(author)
-
Selecting benchmarks for reactor calculations
- 2014
-
In: PHYSOR 2014 - The Role of Reactor Physics toward a Sustainable Future.
-
Conference paper (peer-reviewed)abstract
- Criticality, reactor physics, fusion and shielding benchmarks are expected to play important roles in GENIV design, safety analysis and in the validation of analytical tools used to design these reactors. For existing reactor technology, benchmarks are used to validate computer codes and test nuclear data libraries. However the selection of these benchmarks are usually done by visual inspection which is dependent on the expertise and the experience of the user and there by resulting in a user bias in the process. In this paper we present a method for the selection of these benchmarks for reactor applications based on Total Monte Carlo (TMC). Similarities betweenan application case and one or several benchmarks are quantified using the correlation coefficient. Based on the method, we also propose an approach for reducing nuclear data uncertainty using integral benchmark experiments as an additional constrain on nuclear reaction models: a binary accept/reject criterion. Finally, the method was applied to a full Lead Fast Reactor core and a set of criticality benchmarks.
|
|
| 17. |
- Alhassan, Erwin, et al.
(author)
-
Selecting benchmarks for reactor simulations : an application to a Lead Fast Reactor
- 2016
-
In: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 96, s. 158-169
-
Journal article (peer-reviewed)abstract
- For several decades reactor design has been supported by computer codes for the investigation of reactor behavior under both steady state and transient conditions. The use of computer codes to simulate reactor behavior enables the investigation of various safety scenarios saving time and cost. There has been an increase in the development of in-house (local) codes by various research groups in recent times for preliminary design of specific or targeted nuclear reactor applications. These codes must be validated and calibrated against experimental benchmark data with their evolution and improvements. Given the large number of benchmarks available, selecting these benchmarks for reactor calculations and validation of simulation codes for specific or target applications can be rather tedious and difficult. In the past, the traditional approach based on expert judgement using information provided in various handbooks, has been used for the selection of these benchmarks. This approach has been criticized because it introduces a user bias into the selection process. This paper presents a method for selecting these benchmarks for reactor calculations for specific reactor applications based on the Total Monte Carlo (TMC) method. First, nuclear model parameters are randomly sampled within a given probability distribution and a large set of random nuclear data files are produced using the TALYS code system. These files are processed and used to analyze a target reactor system and a set of criticality benchmarks. Similarity between the target reactor system and one or several benchmarks is quantified using a similarity index. The method has been applied to the European Lead Cooled Reactor (ELECTRA) and a set of plutonium and lead sensitive criticality benchmarks using the effective multiplication factor (keffkeff). From the study, strong similarity were observed in the keffkeff between ELECTRA and some plutonium and lead sensitive criticality benchmarks. Also, for validation purposes, simulation results for a list of selected criticality benchmarks simulated with the MCNPX and SERPENT codes using different nuclear data libraries have been compared with experimentally measured benchmark keff values.
|
|
| 18. |
- Alhassan, Erwin, et al.
(author)
-
Uncertainty and correlation analysis of lead nuclear data on reactor parameters for the European Lead Cooled Training Reactor
- 2015
-
In: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 75, s. 26-37
-
Journal article (peer-reviewed)abstract
- The Total Monte Carlo (TMC) method was used in this study to assess the impact of Pb-204, 206, 207, 208 nuclear data uncertainties on reactor safety parameters for the ELECTRA reactor. Relatively large uncertainties were observed in the k-eff and the coolant void worth (CVW) for all isotopes except for Pb-204 with signicant contribution coming from Pb-208 nuclear data; the dominant eectcame from uncertainties in the resonance parameters; however, elastic scattering cross section and the angular distributions also had signicant impact. It was also observed that the k-eff distribution for Pb-206, 207, 208 deviates from a Gaussian distribution with tails in the high k-eff region. An uncertainty of 0.9% on the k-eff and 3.3% for the CVW due to lead nuclear data were obtained. As part of the work, cross section-reactor parameter correlations were also studied using a Monte Carlo sensitivity method. Strong correlations were observed between the k-eff and (n,el) cross section for all the lead isotopes. The correlation between the (n,inl) and the k-eff was also found to be signicant.
|
|
| 19. |
- Arve, Per, et al.
(author)
-
The NN-1, π and ΔN-1 delta decay modes in the nuclear medium
- 1994
-
In: Nuclear Physics A. - : Elsevier BV. - 0375-9474 .- 1873-1554. ; 572:3-4, s. 600-620
-
Journal article (peer-reviewed)abstract
- The dependence of the Δ-width on the Δ-decay channels is studied in the nuclear medium. We calculate the decay of the delta into a nucleon and a general pisobar mode consisting of NN-1-, π- and dN-1-modes. For the case of no width of the Δ in the pisobar we present partial contributions to the Δ-width from the Δ-decay channels: Δ→N+NN-1, Δ→N+π and Δ→N+ΔN-1. Results for a self-consistent treatment of the Δ-width in the pisobar is presented. The self-consistent treatment only modifies the results with no width in the pisobar to a small extent. It is found that NN-1 channel is not only dominating the decay at low energies of the Δ-resonance but at high densities (ρ>1.5ρ0) this channel also dominates the decay at higher energies. Qualitative agreement with inclusive and exclusive (p,n) and (3He,T) experiments is achieved
|
|
| 20. |
- Avdeichikov, Vladimir, et al.
(author)
-
Analysis of charged particle emission sources and coalescence in E/A=61 (MeVAr)-Ar-36+Al-27, Sn-112 and Sn-124 collisions
- 2004
-
In: Nuclear Physics, Section A. - : Elsevier BV. - 0375-9474. ; 736:1-2, s. 22-38
-
Journal article (peer-reviewed)abstract
- Single-particle kinetic energy spectra and two-particle small angle correlations of protons (p), deuterons (d) and tritons (t) have been measured simultaneously in 61 A MeV Ar-36 + Al-27, Sn-112 and Sn-124 collisions. Characteristics of the emission sources have been derived from a "source identification plot" (beta(source)-E-CM plot), constructed from the single-particle invariant spectra, and compared to the complementary results from two-particle correlation functions. Furthermore, the source identification plot has been used to determine the conditions when the coalescence mechanism can be applied for composite particles. In our data, this is the case only for the Ar + Al reaction, where p, d and t are found to originate from a common source of emission (from the overlap region between target and projectile). In this case, the coalescence model parameter, (p) over tilde (0)-the radius of the complex particle emission source in momentum space, has been analyzed.
|
|
| 21. |
- Bjork, J, et al.
(author)
-
Better in theory than in practise? Challenges when applying the luck egalitarian ethos in health care policy
- 2020
-
In: Medicine, health care, and philosophy. - : Springer Science and Business Media LLC. - 1572-8633 .- 1386-7423. ; 23:4, s. 735-742
-
Journal article (peer-reviewed)abstract
- Luck egalitarianism, a theory of distributive justice, holds that inequalities which arise due to individuals’ imprudent choices must not, as a matter of justice, be neutralized. This article deals with the possible application of luck egalitarianism to the area of health care. It seeks to investigate whether the ethos of luck egalitarianism can be operationalized to the point of informing health care policy without straying from its own ideals. In the transition from theory to practise, luck egalitarianism encounters several difficulties. We argue that the charge of moral arbitrariness can, at least in part, be countered by our provided definition of “imprudent actions” in the health area. We discuss the choice for luck egalitarianism in health care between ex ante and ex post policy approaches, and show how both approaches are flawed by luck egalitarianism’s own standards. We also examine the problem of threshold setting when luck egalitarianism is set to practise in health care. We argue that wherever policy thresholds are set, luck egalitarianism in health care risks pampering the imprudent, abandoning the prudent or, at worst, both. Furthermore, we claim that moves to mitigate these risks in turn diminish the normative importance of the ethos of luck egalitarianism to policy. All in all, our conclusion is that luck egalitarianism cannot be consistently applied as a convincing and relevant normative principle in health care policy.
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
|
|
| 29. |
- Ekman, Jörgen, et al.
(author)
-
Retention of Pb isotopes in glass surfaces for retrospective assessment of radon exposure
- 2006
-
In: Nuclear Instruments and Methods in Physics Research Section B. - : Elsevier. - 0168-583X .- 1872-9584. ; 249:1-2, s. 544-547
-
Journal article (peer-reviewed)abstract
- In recent years there has been increasing interest in radio-epidemiological techniques to retrospectively measure the radon dose exposure by determining the activity of 210Pb, the longest-lived 222Rn progeny, in glass surface layers. In this study the diffusion of 39 keV 209Pb+ ions implanted into glass using the IGISOL facility has been studied under conditions that mimic the recoil implantation of 210Pb from 222Rn. The resulting depth distributions of 209Pb were then measured after heat treatment in vacuum at different temperatures by a sputter erosion technique. The diffusion coefficient could be described by an Arrhenius equation D = D0exp(−H/kT) where and H = 2.81 ± 0.11 eV. No statistically significant loss of 209Pb from the sample was observed for annealing between 470 and 600 °C.
|
|
| 30. |
- Ghetti, Roberta, et al.
(author)
-
Calibration of a neutron time-of-flight multidetector system for an intensity interferometry experiment
- 2004
-
In: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 516:2-3, s. 492-501
-
Journal article (peer-reviewed)abstract
- We present the details of an experiment on light particle interferometry. In particular, we focus on a time-of-flight technique which uses a cyclotron RF signal as a start and a liquid scintillator time signal as a stop, to measure neutron energy in the range of En approximate to 1.8-150 MeV. This dynamic range (up to 300 ns) is much larger than the beam bunch separation (54 ns) of the AGOR cyclotron (KVI). However, the problem of a short burst period is overcome by using the time information obtained from a fast projectile fragment phoswich detector. The complete analysis procedure to extract the final neutron kinetic energy spectra, is discussed. (C) 2003 Elsevier B.V. All rights reserved.
|
|
| 31. |
|
|
| 32. |
- Ghetti, R, et al.
(author)
-
Characterization of nuclear sources via two-neutron intensity interferometry
- 1999
-
In: NUCLEAR PHYSICS A. - : ELSEVIER SCIENCE BV. - 0375-9474. ; 660:1, s. 20-40
-
Journal article (peer-reviewed)abstract
- The neutron energy spectrum and the two-neutron correlation function have been measured for the E/A = 45 MeV Ni + Al reaction in order to assess the space-time characteristics of the neutron emitting source. When comparing the data to a statistical model,
|
|
| 33. |
- Ghetti, Roberta, et al.
(author)
-
Chronology of neutron, proton and deuteron emission in intermediate energy heavy ion reactions
- 2004
-
In: Nuclear Physics, Section A. - : Elsevier BV. - 0375-9474. ; 734, s. 597-600
-
Journal article (peer-reviewed)abstract
- The CHIC Collaboration has performed a series of fermion interferometry experiments to study the space-time evolution of the emission sources in intermediate energy heavy ion reactions. Correlation functions of non-identical particles have allowed us to extract model independent information on the sequence of emission (chronology) of the particles. In this contribution, we discuss the order of emission of neutrons, protons and deuterons from the E/A = 61 MeV Ar-36 + Al-27, Sn-112 and Sn-124 reactions.
|
|
| 34. |
|
|
| 35. |
|
|
| 36. |
|
|
| 37. |
- Ghetti, R, et al.
(author)
-
Influence of cross-talk rejection procedures on two-neutron intensity interferometry.
- 1999
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 421:3, s. 542-551
-
Journal article (peer-reviewed)abstract
- This work investigates the effects of a cross-talk rejection procedure on the two-neutron correlation function. The rejection method relies only upon simple kinematic relations between the energy of the detected neutrons and can be applied to commonly used detector configurations. It is demonstrated that the comparison of a cross-talk corrected correlation function with the theory is meaningful as long as the cross-talk rejection procedure and the response of the detector filter are consistently incorporated into the theoretical calculations.
|
|
| 38. |
|
|
| 39. |
- Ghetti, Roberta, et al.
(author)
-
Isospin effects in two-particle correlation functions: A probe for the isospin dependence of the nuclear equation of state
- 2005
-
In: Nuclear Physics, Section A. - : Elsevier BV. - 0375-9474. ; 752:Part 2, s. 480-483
-
Journal article (peer-reviewed)abstract
- Small-angle two-particle correlation functions, involving neutrons and protons, have been measured for E/A = 61 MeV Ar + Sn-112,Sn-124 collisions, i.e. systems similar in size but with different isospin asymmetry. The correlation strength of neutron-proton (np) and proton-proton (pp) pairs is stronger for the more neutron-rich system, indicating a shorter average emission time for this system. Comparisons with isospin-dependent BUU transport model simulations are presented, and their implications for the density dependence of the nuclear symmetry energy are discussed.
|
|
| 40. |
|
|
| 41. |
|
|
| 42. |
- Ghetti, Roberta, et al.
(author)
-
Isospin effects on two-particle correlation functions in E/A=61 MeV Ar-36+Sn-112,Sn-124 reactions
- 2004
-
In: Physical Review C (Nuclear Physics). - 0556-2813. ; 69:3
-
Journal article (peer-reviewed)abstract
- Small-angle, two-particle correlation functions have been measured for Ar-36+Sn-112,Sn-124 collisions at E/A=61 MeV. Total momentum gated neutron-proton (np) and proton-proton (pp) correlations are stronger for the Sn-124 target. Some of the correlation functions for particle pairs involving deuterons or tritons (nd, pt, and nt) also show a dependence on the isospin of the emitting source.
|
|
| 43. |
- Ghetti, Roberta, et al.
(author)
-
Particle emission time sequence in intermediate energy heavy ion reactions
- 2003
-
In: Nuclear Physics, Section A. - 0375-9474 .- 1873-1554. ; 721, s. 313-316
-
Journal article (peer-reviewed)abstract
- The CHIC Collaboration has performed a series of simultaneous pp, np and nn fermion interferometry experiments in order to study the space-time evolution of the emission sources in intermediate energy heavy ion reactions. Furthermore, when correlations of non-identical particles are available, additional model independent information on the emission chronology of the particles is obtained. In this contribution, after reviewing the method to determine the order of emission of non-identical particles, we discuss the emission chronology of neutrons and protons from the E/A = 45 MeV Ni-58 + Al-27 reaction and from the E/A = 60 MeV Ar-36 + Al-27 reaction, shown here for the first time.
|
|
| 44. |
|
|
| 45. |
- Ghetti, Roberta, et al.
(author)
-
Two-particle correlation functions in projectilelike emission experiments at very forward angles
- 2004
-
In: Physical Review C (Nuclear Physics). - 0556-2813. ; 70:2
-
Journal article (peer-reviewed)abstract
- Projectilelike fragment emission is studied via two-particle correlation functions, constructed from coincidence data detected at very forward angles (0.7degreesless than or equal totheta(lab)less than or equal to7degrees) in the E/A=44 and 77 MeV Ar-40+Al-27 reactions. The shape of the proton-proton correlation function is unexpected. Possible origins of this effect are discussed and a way to reestablish the expected shape is presented.
|
|
| 46. |
|
|
| 47. |
|
|
| 48. |
- Helgesson, G, et al.
(author)
-
Misuse of Coauthorship in Medical Theses in Sweden
- 2018
-
In: Journal of empirical research on human research ethics : JERHRE. - : SAGE Publications. - 1556-2654 .- 1556-2646. ; 13:4, s. 402-411
-
Journal article (peer-reviewed)abstract
- The aim of this study was to explore experiences of authorship issues among persons who have recently received their doctoral degree in medicine in Sweden. A survey was mailed to all who received their PhD at a medical faculty at a Swedish university the first half of 2016. Questions concerned experiences of violations of the first three authorship criteria in the Vancouver rules and of misuse of authorship order in the articles of their thesis, and the respondents’ attitudes to these matters. The questionnaire was returned by 285 respondents (68%). According to the majority (53%), the Vancouver rules were not fully respected in the articles of their thesis. A vast majority (97%) found it important that authorship issues are handled correctly, but only 19% responded that their department has a clear and consistently applied policy. We conclude that authorship guidelines are frequently disrespected at medical faculties in Sweden. The universities seem to provide limited support on authorship issues.
|
|
| 49. |
- Helgesson, Johan, et al.
(author)
-
Finite Size scaling and the nuclear liquid-gas phase transition
- 2003
-
Conference paper (peer-reviewed)abstract
- Recent analyses of multifragmentation data in terms of Fisher's model have led to the estimate of the coexistence curve of finite nuclear matter as well as of the location of the critical point. In order to extrapolate those results to infinite nuclear matter, finite size effects have to be taken into account. Guided by the finite size behavior of the three-dimensional Ising model, we propose a modified Fisher Droplet model expression that incorporates surface and correlation length effects.
|
|
| 50. |
- Helgesson, J, et al.
(author)
-
Finite size scalings and the nuclear liquid-gas phase transition
- 2004
-
In: Nuclear Physics, Section A. - : Elsevier BV. - 0375-9474. ; 734, s. 549-552
-
Journal article (peer-reviewed)abstract
- Finite size effects oil cluster distributions are investigated within Ising and Fisher's Droplet Model. Fixed magnetization calculations suggest that, the introduction of a complement correction of the emitting system is a promising approach for finite size scalings.
|
|
