1. |
- Bahr, A., et al.
(author)
-
High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings-Influence of Mo addition
- 2023
-
In: Surface & Coatings Technology. - : Elsevier. - 0257-8972 .- 1879-3347. ; 468
-
Journal article (peer-reviewed)abstract
- The Si-based alloying of transition metal diborides is a promising strategy to improve their limited oxidation resistance in high-temperature environments. In this study, we investigate the oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings sputter-deposited from alloyed CrB2/TMSi2 targets (TM = Cr, Mo). The asdeposited Cr-(Mo)-Si-B2-z coatings are stabilized in the single-phased hexagonal AlB2-structure, except the high-Si containing Cr0.26Mo0.11Si0.24B0.39 presenting amorphous character. The Mo-containing Cr-Mo-Si-B2-z films exhibit relatively high hardness compared to their ternary Cr-Si-B2-z counterparts, obtaining up to 26 GPa due to the formation of (Cr,Mo)B-2 solid solutions. The Si-alloying in ternary and quaternary coatings provides oxidation resistance up to 1200 degrees C, owing to the formation of highly protective double-layered scales consisting of SiO2 with a Cr2O3 layer on top, inhibiting oxygen inward diffusion. The quaternary Cr0.31Mo0.07Si0.15B0.47 coating is distinguished by superior oxidation resistance with lower porosity and void formation compared to the ternary Cr0.37Si0.16B0.47. Mo proved to be the key element for the higher stability and enhanced oxidation resistance due to the evolution of the MoSi2 phase at similar to 600 degrees C. This phase formation controls the Si diffusion and mobility within the microstructure, thus reducing the porosity and governing the Si supply to form SiO2 scale. The quaternary Cr0.31Mo0.07Si0.15B0.47 coating maintained an oxidation resistance up to 30 h at 1200 degrees C by forming a 2.5 mu m dense amorphous Si-based oxide scale with a thin Cr2O3 on top.
|
|
2. |
- Lukacs, H., et al.
(author)
-
Seasonal trends and possible sources of brown carbon based on 2-year aerosol measurements at six sites in Europe
- 2007
-
In: Journal of Geophysical Research. - : American Geophysical Union (AGU). - 0148-0227 .- 2156-2202. ; 112:D23, s. 9-
-
Journal article (peer-reviewed)abstract
- Brown carbon is a ubiquitous and unidentified component of organic aerosol which has recently come into the forefront of atmospheric research. This component is strongly linked to the class of humic-like substances (HULIS) in aerosol whose ultimate origin is still being debated. Using a simplified spectroscopic method the concentrations of brown carbon have been determined in aqueous extracts of fine aerosol collected during the CARBOSOL project. On the basis of the results of 2-year measurements of several aerosol constituents at six European sites, possible sources of brown carbon are inferred. Biomass burning ( possibly domestic wood burning) is shown to be a major source of brown carbon in winter. At elevated sites in spring, smoke from agricultural fires may be an additional source. Direct comparison of measured brown carbon concentrations with HULIS determined by an independent method reveals that the two quantities correlate well at low-elevation sites throughout the year. At high-elevation sites the correlation is still high for winter but becomes markedly lower in summer, implying different sources and/or atmospheric sinks of brown carbon and HULIS. The results shed some light on the relationships between atmospheric brown carbon and HULIS, two ill-defined and overlapping components of organic aerosol.
|
|
3. |
- Fuger, C., et al.
(author)
-
Influence of Ta on the oxidation resistance of WB2-z coatings
- 2021
-
In: Journal of Alloys and Compounds. - : Elsevier. - 0925-8388 .- 1873-4669. ; 864
-
Journal article (peer-reviewed)abstract
- Ternary W1-x TaxB2-z is a promising protective coating material possessing enhanced ductile character and phase stability compared to closely related binaries. Here, the oxidation resistance of W1-xTaxB2-z thin films was experimentally investigated at temperatures up to 700 degrees C. Ta alloying in sputter deposited WB2-z coatings led to decelerated oxide scale growth and a changed growth mode from paralinear to a more linear (but retarded) behavior with increasing Ta content. The corresponding rate constants decrease from k(p)* = 6.3.10(-4) mu m(2)/s for WB2-z to k(p)* = 1.1.10(-4) mu m(2)/s for W0.66Ta0.34B2-z as well as k(1) = 2.6.10(-5) mu m/s for TaB2-z, underlined by decreasing scale thicknesses ranging from 1170 nm (WB2-z), over 610 nm (W0.66Ta0.34B2-z) to 320 nm (TaB2-z) after 10 min at 700 degrees C. Dense and adherent scales exhibit an increased tantalum content (columnar oxides), which suppresses the volatile character of tungsten-rich as well as boron oxides, hence being a key-factor for enhanced oxidation resistance. Thus, adding Ta (in the range of x = 0.2-0.3) to a-structured WB2-z does not only positively influence the ductile character and thermal stability but also drastically increases the oxidation resistance.
|
|
4. |
- Hagleitner, Daniel R., et al.
(author)
-
Bulk and surface characterization of In2O3(001) single crystals
- 2012
-
In: Physical Review B (Condensed Matter and Materials Physics). - 1098-0121. ; 85:11
-
Journal article (peer-reviewed)abstract
- A comprehensive bulk and surface investigation of high-quality In2O3(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. Inductively coupled plasma mass spectrometry (ICP-MS) reveals small residues of Pb, Mg, and Pt in the crystals. Four-point-probe measurements show a resistivity of 2.0 +/- 0.5 x 10(5) Omega cm, which translates into a carrier concentration of approximate to 10(12) cm(-3). The results from x-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) angstrom from the previously accepted value of 10.117 angstrom. Scanning tunneling microscopy (STM) images of a reduced (sputtered/annealed) and oxidized (exposure to atomic oxygen at 300 degrees C) surface show a step height of 5 angstrom, which indicates a preference for one type of surface termination. The surfaces stay flat without any evidence for macroscopic faceting under any of these preparation conditions. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 angstrom height under reducing conditions, with a surface structure corresponding to a strongly distorted indium lattice. Scanning tunneling spectroscopy (STS) reveals a pronounced surface state at the Fermi level (E-F). Photoelectron spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to atomic oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV is observed for the reduced surface, while the band bending of the oxidized surface is of the order of 0.1 eV or less.
|
|
5. |
- Hu, Chun, et al.
(author)
-
Influence of co-sputtering AlB2 to TaB2 on stoichiometry of non-reactively sputtered boride thin films
- 2024
-
In: Materials Research Letters. - : TAYLOR & FRANCIS INC. - 2166-3831. ; 12:8, s. 561-570
-
Journal article (peer-reviewed)abstract
- Transition metal diboride thin films are promising functional materials for their outstanding mechanical properties and thermal stability. By combining experiment and simulations, we discuss angular distribution of the sputtered species, their scattering in the gas phase, re-sputtering and potential evaporation from the grown films for the complex evolution of film compositions, as well as energetic preference for vacancy formation and competing phases as factors for governing the phase constitution. By co-sputtering from two compound targets, we developed phase-pure crystalline (Ta,Al)B2 solid solution thin films and correlate the stoichiometry changes with the evolution of their microstructure, hardness, and elastic modulus. {GRAPHICAL ABSTRACT}
|
|