1. |
- He, Y., et al.
(author)
-
Combined effects of trapped energetic ions and resistive layer damping on the stability of the resistive wall mode
- 2016
-
In: Physics of Plasmas. - : AIP Publishing. - 1089-7674 .- 1070-664X. ; 23:1
-
Journal article (peer-reviewed)abstract
- A dispersion relation is derived for the stability of the resistive wall mode (RWM), which includes both the resistive layer damping physics and the toroidal precession drift resonance damping from energetic ions in tokamak plasmas. The dispersion relation is numerically solved for a model plasma, for the purpose of systematic investigation of the RWM stability in multi-dimensional plasma parameter space including the plasma resistivity, the radial location of the resistive wall, as well as the toroidal flow velocity. It is found that the toroidal favorable average curvature in the resistive layer contributes a significant stabilization of the RWM. This stabilization is further enhanced by adding the drift kinetic contribution from energetic ions. Furthermore, two traditionally assumed inner layer models are considered and compared in the dispersion relation, resulting in different predictions for the stability of the RWM.
|
|
2. |
- Chu, M.S., et al.
(author)
-
Response of a resistive and rotating tokamak to external magnetic perturbations below the Alfven frequency
- 2011
-
In: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 51, s. 073036-
-
Journal article (peer-reviewed)abstract
- Motivated by the recent experimental observation that plasma stability can be improved by external magnetic perturbations, the general problem of plasma response to external magnetic perturbations is investigated. Different (vacuum, ideal and resistive) plasma response models are considered and compared. Plasma response, in experiments where stabilization was achieved, is obtained through computation using the MARS-F code, with a plasma model that includes both plasma resistivity and rotation. The resultant magnetic field line stochasticity is much reduced from that obtained formerly using the vacuum plasma model. This reduced stochasticity is more consistent with the favourable experimental observation of enhanced stability. Examples are given for the response of an ITER plasma to perturbations generated by the correction coils; and the response of a plasma to external coils (antenna) up to the Alfvén frequency.
|
|
3. |
- Li, L., et al.
(author)
-
Screening of external magnetic perturbation fields due to sheared plasma flow
- 2016
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 56:9
-
Journal article (peer-reviewed)abstract
- Within the single fluid resistive magnetohydrodynamic model, systematic toroidal modelling efforts are devoted to investigate the plasma response induced screening of the applied external 3D magnetic field perturbations in the presence of sheared toroidal flow. One particular issue of interest is addressed, when the local flow speed approaches zero at the perturbation rational surface inside the plasma. Subtle screening physics, associated with the favourable averaged toroidal curvature effect (the GGJ effect (Glasser et al 1975 Phys. Fluids 7 875)), is found to play an essential role during slow flow near the rational surface by enhancing the screening at reduced flow. A strong cancellation effect between different terms of Ohm's law is discovered, leading to different screening physics in the GGJ regime, as compared to that of conventional screening of the typical resistive-inertial regime occurring at faster flow. These modelling results may be applicable to interpret certain mode locking experiments, as well as type-I edge localized mode suppression experiments, with resonant magnetic field perturbations being applied to tokamak plasmas at low input toroidal torque.
|
|
4. |
- Meyer, H., et al.
(author)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
5. |
- Yang, Xu, et al.
(author)
-
Modelling of plasma response to 3D external magnetic field perturbations in EAST
- 2016
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 58:11, s. 114006-
-
Journal article (peer-reviewed)abstract
- Sustained mitigation and/or suppression of type-I edge localized modes (ELMs) has been achieved in EAST high-confinement plasmas, utilizing the resonant magnetic perturbation (RMP) fields produced by two rows of magnetic coils located just inside the vacuum vessel. Systematic toroidal modelling of the plasma response to these RMP fields with various coil configurations (with dominant toroidal mode number n = 1, 2, 3, 4) in EAST is, for the first time, carried out by using the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681), with results reported here. In particular, the plasma response is computed with varying coil phasing (the toroidal phase difference of the coil currents) between the upper and lower rows of coils, from 0 to 360°. Four figures of merit, constructed based on the MARS-F computations, are used to determine the optimal coil phasing. The modelled results, taking into account the plasma response, agree well with the experimental observations in terms of the coil phasing for both the mitigated and the suppressed ELM cases in EAST experiments. This study provides a crucial confirmation of the role of the plasma edge peeling response in ELM control, complementing similar studies carried out for other tokamak devices.
|
|
6. |
- Zhou, Lina, et al.
(author)
-
Plasma response based RMP coil geometry optimization for an ITER plasma
- 2016
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 58:11, s. 115003-
-
Journal article (peer-reviewed)abstract
- Based on an ITER 15MA Q = 10 inductive scenario, a systematic numerical investigation is carried out in order to understand the effect of varying the geometry of the magnetic coils, used for controlling the edge localized modes in tokamaks, on the plasma response to the resonant magnetic perturbation (RMP) fields produced by these coils. Toroidal computations show that both of the plasma response based figures of merit - one is the pitch resonant radial field component near the plasma edge and the other is the plasma displacement near the X-point of the separatrix - consistently yield the same prediction for the optimal coil geometry. With a couple of exceptions, the presently designed poloidal location of the ITER upper and lower rows of RMP coils is close to the optimum, according to the plasma response based criteria. This holds for different coil current configurations with n = 2, 3, 4, as well as different coil phasing between the upper and lower rows. The coils poloidal width from the present design, on the other hand, is sub-optimal for the upper and lower rows. Modelling also finds that the plasma response amplitude sharply decreases by moving the middle row RMP coils of ITER from the designed radial location (just inside the inner vacuum vessel) outwards (outside the outer vacuum vessel). The decay rate is sensitively affected by the middle row coils' poloidal coverage for low-n (n = 1, 2) RMP fields, but not for high-n (n = 4) fields.
|
|
7. |
|
|
8. |
|
|
9. |
|
|
10. |
|
|
11. |
- Atalaya, Juan, 1981, et al.
(author)
-
Design and optimization of coreless components using admittance matrix and efficiently calculated sensitivities
- 2007
-
In: IEEE Transactions on Magnetics. ; 43, s. 1621-1624
-
Journal article (peer-reviewed)abstract
- This paper presents a novel technique for designing coreless components (inductors and transformers) based on the admittance matrix at quasi-static approximation. In addition, an optimization method based on continuum sensitivity is applied. Efficiency of the design method is shown for inductors that have axisymmetry and carry azimuthal currents. In order to avoid coupling between closely located inductors, a shielding structure is proposed and shape-optimized to confine the magnetic energy.
|
|
12. |
|
|
13. |
- Baruzzo, M., et al.
(author)
-
3D effects on RWM physics in RFX-mod
- 2011
-
In: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 51, s. 083037-
-
Journal article (peer-reviewed)abstract
- n this paper insights into the behaviour of resistive wall modes (RWMs) in the RFX-mod reversed field pinch device are given, with a focus on 3D issues in the characterization of the m spectrum of the mode and on the study of multi-harmonic coupling.In the first part of the paper the interaction between multiple unstable RWMs is studied and the presence of a coupling between different poloidal components of the most unstable RWM is demonstrated, taking advantage of the flexibility of the RFX-mod control system.In the second part of the work, the dependence of the growth rates of RWMs on a complete set of plasma parameters is studied in order to create a complete and homogeneous database, which permits a careful validation of stability codes.Finally, the experimental data are compared with the code predictions which take into account the 3D structure of conductors around the plasma. The different effects that modify the simple description, where unstable modes can be identified with single Fourier harmonics, appear to be explained by a mixture of toroidicity-induced and 3D eddy current effects.
|
|
14. |
|
|
15. |
|
|
16. |
|
|
17. |
|
|
18. |
|
|
19. |
|
|
20. |
- Buttery, R. J., et al.
(author)
-
The Impact of 3-D Fields on Tearing Mode Stability of H-modes
- 2011
-
In: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 51, s. 073016-
-
Journal article (peer-reviewed)abstract
- New processes have been discovered in the interaction of 3D fields with tearing mode stability at low torque and modest β on DIII-D and NSTX. These are thought to arise from the plasma response at the tearing resonant surface, which theoretically is expected to depend strongly on plasma rotation and underlying intrinsic tearing stability. This leads to sensitivities additional to those previously identified at low density where the plasma rotation is more readily stopped, or at high βN where ideal MHD responses amplify the fields (where βN is the plasma β divided by the ratio of plasma current to minor radius multiplied by toroidal field). It is found that the threshold size for 3D fields to induce modes tends to zero as the natural tearing βN limit is approached. 3D field sensitivity is further enhanced at low rotation, with magnetic probing detecting an increased response to applied fields in such regimes. Modelling with the MARS-F code confirms the interpretation with the usual plasma screening response breaking down in low rotation plasmas and a tearing response developing, opening the door to additional sensitivities to β and the current profile. Typical field thresholds to induce modes in torque-free βN ~ 1.5 H-modes are well below those in ohmic plasmas or plasmas near the ideal βN limit. The strong interaction with the tearing mode βN limit is identified through rotation shear, which is decreased by the 3D field, leading to decreased tearing stability. Thus both locked and rotating mode field thresholds can be considered in terms of a torque balance, with sufficient braking leading to destabilization of a mode. On this basis new measurements of the principal parameter scalings for error field threshold have been obtained in torque-free H-modes leading to new predictions for error field sensitivity in ITER. The scalings have similar exponents to ohmic plasmas, but with seven times lower threshold at the ITER baseline βN value of 1.8, and a linear dependence on proximity to the tearing mode βN limit (~2.2 at zero torque). This reinforces the need to optimize error field correction strategies in ITER, and implement sources to drive plasma rotation.
|
|
21. |
- Chapman, I.T., et al.
(author)
-
Macroscopic Stability of High b MAST Plasmas
- 2011
-
In: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 51, s. 073040-
-
Journal article (peer-reviewed)abstract
- The high-beta capability of the spherical tokamak, coupled with a suite of world-leading diagnostics on MAST, has facilitated significant improvements in the understanding of performance-limiting core instabilities in high performance plasmas. For instance, the newly installed motional Stark effect diagnostic, with radial resolution
|
|
22. |
- Chapman, I.T., et al.
(author)
-
The Effect of Energetic Particles on Resistive Wall Mode Stability in MAST
- 2011
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 53, s. 065022-
-
Journal article (peer-reviewed)abstract
- Resistive wall mode (RWM) stability limits have been probed by MHD spectroscopy and numerical modelling. MAST plasmas have operated up to βN = 5.7, well above the predicted ideal kink no-wall limit or measured resonant field amplification limits due to a combination of rotation and kinetic damping. By varying the density, both the rotation and the fast ion distribution function have been changed dramatically. Detailed drift-kinetic modelling shows that whilst the contribution of energetic beam ions to RWM damping does increase at sufficiently high plasma rotation as to allow resonance with the fast ion precession frequency, the thermal ion damping always dominates over the fast ion contribution.
|
|
23. |
- Christie, Michael, 1946, et al.
(author)
-
Some issues in online assessment
- 2005
-
In: IPSI Conference, Pescara, Italy 27-31 July 2005.
-
Conference paper (peer-reviewed)
|
|
24. |
- Chu, M.S., et al.
(author)
-
Physics of Plasmas Modeling of Feedback and Rotation Stabilization of the Resistive Wall Mode in Tokamaks
- 2004
-
In: Physics of Plasmas. ; 11, s. 2497-
-
Journal article (peer-reviewed)abstract
- Steady-state operation of the advanced tokamak reactor relies on maintaining plasma stability with respect to the resistive wall mode ~RWM!. Active magnetic feedback and plasma rotation are the two methods proposed and demonstrated for this purpose. A comprehensive modeling effort including both magnetic feedback and plasma rotation is needed for understanding the physical mechanisms of the stabilization and to project to future devices. For plasma with low rotation, a complete solution for the feedback issue is obtained by assuming the plasma obeys ideal magnetohydrodynamics ~MHDs! and utilizing a normal mode approach ~NMA! @M. S. Chu et al., Nucl. Fusion 43, 441 ~2003!#. It is found that poloidal sensors are more effective than radial sensors and coils inside of the vacuum vessel more effective than outside. For plasmas with non-negligible rotation, a comprehensive linear nonideal MHD code, the MARS-F has been found to be suitable. MARS-F @Y. Q. Liu et al., Phys. Plasmas 7, 3681 ~2000!# has been benchmarked in the ideal MHD limit against the NMA. The effect of rotation stabilization of the plasma depends on the plasma dissipation model. Broad qualitative features of the experiment are reproduced. Rotation reduces the feedback gain required for RWM stabilization. Reduction is significant when rotation is near the critical rotation speed needed for stabilization. The International Thermonuclear Experimental Reactor ~ITER! @R. Aymar et al., Plasma Phys. Controlled Fusion 44, 519 ~2002!# ~scenario IV for advanced tokamak operation! may be feedback stabilized with babove the no wall limit and up to an increment of ;50% towards the ideal limit. Rotation further improves the stability.
|
|
25. |
|
|
26. |
|
|
27. |
|
|
28. |
- Gregoratto, D., et al.
(author)
-
Optimisation of Resistive Wall Mode Control in Reversed Field Pinches
- 2004
-
In: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 44, s. 1-
-
Journal article (peer-reviewed)abstract
- Feedback stabilization of magnetohydrodynamic modes in reversed field pinches is analysed for a set of discrete coils driven by voltage control. It is found that the resistive wall mode can be stabilized with a very simple controller structure and with acceptable voltages in the coils. These results are obtained by using a sufficient number of active coils and either sensors for the radial field or sensors for the poloidal or toroidal field placed inside the resistive wall. The result is robust with respect to variations in the plasma equilibrium. Poloidal and toroidal sensors placed outside the wall require a more complicated controller and very high voltages, and do not allow as good control performance as internal sensors.
|
|
29. |
|
|
30. |
- Guo, S. C., et al.
(author)
-
Cancellation of drift kinetic effects between thermal and energetic particles on the resistive wall mode stabilization
- 2016
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 56:7, s. Artno 076006-
-
Journal article (peer-reviewed)abstract
- Drift kinetic stabilization of the resistive wall mode (RWM) is computationally investigated using MHD-kinetic hybrid code MARS-K following the non-perturbative approach (Liu et al 2008 Phys. Plasmas 15 112503), for both reversed field pinch (RFP) and tokamak plasmas. Toroidal precessional drift resonance effects from trapped energetic ions (EIs) and various kinetic resonances between the mode and the guiding center drift motions of thermal particles are included into the self-consistent toroidal computations. The results show cancellation effects of the drift kinetic damping on the RWM between the thermal particles and EIs contributions, in both RFP and tokamak plasmas, even though each species alone can provide damping and stabilize RWM instability by respective kinetic resonances. The degree of cancellation generally depends on the EIs equilibrium distribution, the particle birth energy, as well as the toroidal flow speed of the plasma.
|
|
31. |
- Hao, G. Z., et al.
(author)
-
Effect of Trapped Energetic Particles on the Resistive Wall Mode
- 2011
-
In: Physical Review Letters. ; 107, s. 015001-
-
Journal article (peer-reviewed)abstract
- A stability analysis for the resistive wall mode is studied in the presence of trapped energetic particles (EPs). When the EPs’ beta exceeds a critical value, a fishbonelike bursting mode (FLM) with an external kink eigenstructure can exist. This offers the first analytic interpretation of the experimental observations [ Phys. Rev. Lett. 103 045001 (2009)]. The mode-particle resonances for the FLM and the q=1 fishbone occur in different regimes of the precession frequency of EPs. In certain ranges of the plasma rotation speed and the EPs’ beta, a mode conversion can occur between the resistive wall mode and FLM.
|
|
32. |
- Hao, G. Z, et al.
(author)
-
Stabilization of the Resistive Wall Mode Instability by Trapped Energetic Particles
- 2011
-
In: Physics of Plasmas. - 1089-7674 .- 1070-664X. ; 18, s. 032513-
-
Journal article (peer-reviewed)abstract
- A theoretical model for investigating the effect of the trapped energetic particles (EPs) on the resistive wall mode (RWM) instability is proposed. The results demonstrate that the trapped EPs have a dramatic stabilizing effect on the RWM because of resonant interaction between the mode and the magnetic precession drift motion of the trapped EPs. The results also show that the effect of the trapped EPs depends on the wall position. In addition, the stabilizing effect becomes stronger when the plasma rotation is taken into account. For sufficiently fast plasma rotation, the trapped EPs can lead to the complete stabilization of the RWM. Furthermore, the trapped EPs can induce a finite real frequency of the RWM in the absence of plasma rotation.
|
|
33. |
|
|
34. |
- In, Y., et al.
(author)
-
Requirements for active resistive wall mode (RWM) feedback control
- 2010
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 52:10, s. 104004-
-
Journal article (peer-reviewed)abstract
- The requirements for active resistive wall mode (RWM) feedback control have been systematically investigated and established using highly reproducible current-driven RWMs in ohmic discharges in DIII-D. The unambiguous evaluation of active RWM feedback control was not possible in previous RWM studies primarily due to the variability of the onset of the pressure-driven RWMs; the stability of the pressure-driven RWM is thought to be sensitive to various passive stabilization mechanisms. Both feedback control specifications and physics requirements for RWM stabilization have been clarified using the current-driven RWMs in ohmic discharges, when little or no passive stabilization effects are present. The use of derivative gain on top of proportional gain is found to be advantageous. An effective feedback control system should be equipped with a power supply with bandwidth greater than the RWM growth rate. It is beneficial to apply a feedback field that is toroidally phase-shifted from the measured RWM phase in the same direction as the plasma current. The efficacy of the RWM feedback control will ultimately be determined by the plasma fluctuations on internal diagnostics, as well as on external magnetics. The proximity of the feedback coils to the plasma appears to be an important factor in determining the effectiveness of the RWM feedback coils. It is desirable that an RWM feedback control system simultaneously handles error field correction at a low frequency, along with direct RWM feedback at a high frequency. There is an indication of the influence of a second least stable RWM, which had been theoretically predicted but never identified in experiments. A preliminary investigation based on active MHD spectroscopic measurement showed a strong plasma response around 400 Hz where the typical plasma response associated with the first least stable RWM was expected to be negligible. Present active feedback control requirements are based on a single mode assumption, so the investigation of the second least stable RWM is of high interest.
|
|
35. |
|
|
36. |
- Kirk, A., et al.
(author)
-
Magnetic perturbation experiments on MAST L and H-mode plasmas using internal coils
- 2011
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 53, s. 065011-
-
Journal article (peer-reviewed)abstract
- Experiments have been performed on MAST using internal (n = 3) resonant magnetic perturbation (RMP) coils. The application of the RMPs to L-mode discharges has shown a clear density pump-out when the field line pitch angle at the low-field side of the plasma is sufficiently well aligned with the applied field. The application of the RMPs before the L–H transition increases the power required to achieve H-mode by at least 30%. In type I ELMing H-mode discharges, at a particular value of q95, the ELM frequency can be increased by a factor of 5 by the application of the RMPs. This effect on the ELMs and the L-mode density pump-out is not correlated with the width of the region for which the Chirikov parameter, calculated using the vacuum field, is greater than 1 but may be correlated with the size of the resonant component of the applied field in the pedestal region or with the location of the peak plasma displacement when the plasma response is taken into account.
|
|
37. |
- Kirk, A., et al.
(author)
-
Resonant magnetic perturbation experiments on MAST using external and internal coils
- 2010
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 50:3, s. 034008-
-
Journal article (peer-reviewed)abstract
- Experiments have been performed on MAST using both external (n = 1, 2) and internal (n = 3) resonant magnetic perturbation (RMP) coils. ELM suppression has not been achieved even though vacuum modelling shows that either set of coils can produce a region (ΔΨpol > 0.17), for which the Chirikov parameter is greater than 1, wider than that correlated with ELM suppression in DIII-D. Although complete ELM suppression has not been achieved, application of RMPs has triggered ELMs in ELM free H-mode periods (n = 3) and increased the ELM frequency in regularly ELM-ing discharges (n = 2, 3). In addition, the application of RMPs in an n = 3 configuration has produced large changes to the edge turbulence in L-mode discharges.
|
|
38. |
- La Haye, R.J., et al.
(author)
-
Scaling of the Plasma Rotation Needed for Stabilizing the n = 1 Resistive Wall Mode (Ideal Kink) in the DIII D Tokamak
- 2004
-
In: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 44, s. 1197-
-
Journal article (peer-reviewed)abstract
- Experiments in the DIII-D tokamak show that the n = 1 ideal kink can be stabilized by a resistive wall if the plasma is rotating fast enough. A database of the onset of the n = 1 resistive wall mode as a function of the equilibrium toroidal magnetic field, the plasma density and the toroidal rotation has been assembled for plasmas with beta between the theoretically predicted no wall and ideal wall stability limits. The critical rotation frequency is found to scale as the inverse of the Alfvén time with ? ?A 0.02 (evaluated at the q = 2 surface at ? 0.6) or ? ?S 0.7, where ?S is the sound time. The dependence of ? ? A or ? ?S on ?N/?N,no wall from 1?2 is weak and suggests the plasmas are in the 'intermediate dissipation' regime.
|
|
39. |
- Lanctot, M.J., et al.
(author)
-
Measurement and modeling of three-dimensional equilibriua in DIII-D
- 2011
-
In: Physics of Plasmas. - 1089-7674 .- 1070-664X. ; 18, s. 056121-
-
Journal article (peer-reviewed)abstract
- A detailed experiment-theory comparison reveals that linear ideal MHD theory is in quantitative agreement with external magnetic and internal soft x-ray measurements of the plasma response to externally applied non-axisymmetric fields over a broad range of beta and rotation. This result represents a significant step toward the goal of advancing the understanding of three-dimensional tokamak equilibria. Both the magnetic and soft x-ray measurements show the driven plasma perturbation increases linearly with the applied perturbation, suggesting the relevance of linear plasma response models. The magnetic and soft x-ray measurements are made at multiple toroidal and poloidal locations, allowing well resolved measurements of the global structure. The comparison also highlights the need to include kinetic effects in the MHD model once beta exceeds 80% of the kink mode limit without a conducting wall. Two distinct types of response fields are identified by the linear ideal MHD model: one that consists of localized currents at the rational surfaces that cancel the applied resonant field and another that is excited by the components of the external field that couple to the kink mode. Numerical simulations show these two fields have similar amplitudes in ITER-shaped DIII-D discharges where n = 3 fields are used to suppress edge localized modes.
|
|
40. |
- Lanctot, M. J., et al.
(author)
-
Validation of the linear ideal magnetohydrodynamic model of three-dimensional tokamak equilibria
- 2010
-
In: Physics of Plasmas. - : AIP Publishing. - 1089-7674 .- 1070-664X. ; 17:3, s. 030701-
-
Journal article (peer-reviewed)abstract
- The first quantitative comparison of linear ideal magnetohydrodynamic (MHD) theory with external magnetic measurements of the nonaxisymmetric plasma perturbation driven by external long-wavelength magnetic fields in high-temperature tokamak plasmas is presented. The comparison yields good (within 20%) agreement for plasma pressures up to ∼ 75% of the ideal stability limit calculated without a conducting wall. For higher plasma pressures, the ideal MHD model tends to overestimate the perturbed field indicating the increasing importance of stabilizing nonideal effects.
|
|
41. |
- Li, L., et al.
(author)
-
Effect of large magnetic islands on screening of external magnetic perturbation fields at slow plasma flow
- 2017
-
In: Physics of Plasmas. - : AIP Publishing. - 1089-7674 .- 1070-664X. ; 24:2
-
Journal article (peer-reviewed)abstract
- A toroidal resistive magneto-hydrodynamic plasma response model, involving large magnetic islands, is proposed and numerically investigated, based on local flattening of the equilibrium pressure profile near a rational surface. It is assumed that such islands can be generated near the edge of the tokamak plasma, due to the penetration of the resonant magnetic perturbations, used for the purpose of controlling the edge localized mode. Within this model, it is found that the local flattening of the equilibrium pressure helps to mitigate the toroidal curvature induced screening effect [Glasser et al., Phys. Fluids 7, 875 (1975)]-the so called Glasser-Greene-Johnson screening, when the local toroidal flow near the mode rational surface is very slow (for example, as a result of mode locking associated with the field penetration). The saturation level of the plasma response amplitude is computed, as the plasma rotation frequency approaches zero. The local modification of the plasma resistivity inside the magnetic island is found to also affect the saturation level of the plasma response at vanishing flow.
|
|
42. |
- Li, L., et al.
(author)
-
Modelling plasma response to RMP fields in ASDEX Upgrade with varying edge safety factor and triangularity
- 2016
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 56:12, s. Art. no. 126007-
-
Journal article (peer-reviewed)abstract
- Toroidal computations are performed using the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681), in order to understand correlations between the plasma response and the observed mitigation of the edge localized modes (ELM) using resonant magnetic perturbation fields in ASDEX Upgrade. In particular, systematic numerical scans of the edge safety factor reveal that the amplitude of the resonant poloidal harmonic of the response radial magnetic field near the plasma edge, as well as the plasma radial displacement near the X-point, can serve as good indicators for predicting the optimal toroidal phasing between the upper and lower rows of coils in ASDEX Upgrade. The optimal coil phasing scales roughly linearly with the edge safety factor , for various choices of the toroidal mode number n = 1-4 of the coil configuration. The optimal coil phasing is also predicted to vary with the upper triangularity of the plasma shape in ASDEX Upgrade. Furthermore, multiple resonance effects of the plasma response, with continuously varying , are computationally observed and investigated.
|
|
43. |
- Li, L., et al.
(author)
-
Toroidal modeling of plasma response to RMP fields in ITER
- 2017
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 59:4
-
Journal article (peer-reviewed)abstract
- A systematic numerical study is carried out, computing the resistive plasma response to the resonant magnetic perturbation (RMP) fields for ITER plasmas, utilizing the toroidal code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681). A number of factors are taken into account, including the variation of the plasma scenarios (from 15 MA Q = 10 inductive scenario to the 9 MA Q = 5 steady state scenario), the variation of the toroidal spectrum of the applied fields (n = 1, 2, 3, 4, with n being the toroidal mode number), the amplitude and phase variation of the currents in three rows of the RMP coils as designed for ITER, and finally a special case of mixed toroidal spectrum between the n = 3 and n = 4 RMP fields. Two-dimensional parameter scans, for the edge safety factor and the coil phasing between the upper and lower rows of coils, yield 'optimal' curves that maximize a set of figures of merit, that are defined in this work to measure the plasma response. Other two-dimensional scans of the relative coil current phasing among three rows of coils, at fixed coil currents amplitude, reveal a single optimum for each coil configuration with a given n number, for the 15 MA ITER inductive plasma. On the other hand, scanning of the coil current amplitude, at fixed coil phasing, shows either synergy or cancellation effect, for the field contributions between the off-middle rows and the middle row of the RMP coils. Finally, the mixed toroidal spectrum, by combining the n = 3 and the n = 4 RMP field, results in a substantial local reduction of the amplitude of the plasma surface displacement.
|
|
44. |
|
|
45. |
|
|
46. |
|
|
47. |
|
|
48. |
|
|
49. |
- Liu, Yueqiang, 1971, et al.
(author)
-
Comparative investigation of ELM control based on toroidal modelling of plasma response to RMP fields
- 2017
-
In: Physics of Plasmas. - : AIP Publishing. - 1089-7674 .- 1070-664X. ; 24:5
-
Journal article (peer-reviewed)abstract
- Extensive modelling efforts of the plasma response to the resonant magnetic perturbation fields, utilized for controlling the edge localized mode (ELM), help to identify the edge-peeling response as a key factor, which correlates to the observed ELM mitigation in several tokamak devices, including MAST, ASDEX Upgrade, EAST, and HL-2A. The recently observed edge safety factor window for ELM mitigation in HL-2A experiments is explained in terms of the edge-peeling response. The computed plasma response, based on toroidal single fluid resistive plasma model with different assumption of toroidal flows, is found generally larger in ELM suppressed cases as compared to that of the ELM mitigated cases, in ASDEX Upgrade and DIII-D. The plasma shaping, in particular, the plasma triangularity, contributes to the enhanced plasma response. But the shaping does not appear to be the sole factor-other factors such as the (higher) pedestal pressure and/or current can also lead to increased edge-peeling response.
|
|
50. |
|
|