1. |
|
|
2. |
- Ahmed, Md Estak, et al.
(author)
-
A Bidirectional Bioinspired [FeFe]-Hydrogenase Model
- 2022
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:8, s. 3614-3625
-
Journal article (peer-reviewed)abstract
- With the price-competitiveness of solar and wind power, hydrogen technologies may be game changers for a cleaner, defossilized, and sustainable energy future. H-2 can indeed be produced in electrolyzers from water, stored for long periods, and converted back into power, on demand, in fuel cells. The feasibility of the latter process critically depends on the discovery of cheap and efficient catalysts able to replace platinum group metals at the anode and cathode of fuel cells. Bioinspiration can be key for designing such alternative catalysts. Here we show that a novel class of iron-based catalysts inspired from the active site of [FeFe]-hydrogenase behave as unprecedented bidirectional electrocatalysts for interconverting H-2 and protons efficiently under near-neutral aqueous conditions. Such bioinspired catalysts have been implemented at the anode of a functional membrane-less H-2/O-2 fuel cell device.
|
|
3. |
- Anderlund, Magnus F., et al.
(author)
-
Redox chemistry of a dimanganese(II,III) complex with an unsymmetric ligand : Water binding, deprotonation and accumulative light-induced oxidation
- 2006
-
In: European Journal of Inorganic Chemistry. - : Wiley. - 1434-1948 .- 1099-1948 .- 1099-0682. ; :24, s. 5033-5047
-
Journal article (peer-reviewed)abstract
- A dinuclear manganese complex {[(Mn2L)-L-II,IIII(mu-OAc)(2)]-ClO4} has been synthesised, where L is the dianion of 2-{[bis-(pyrid-2-ylmethyl)amino]methyl}-6-{[(3,5-di-tert-butyl-2- hydroxybenzyl)(pyrid-2-ylmethyl)amino]methyl)-4-methylphenol, an unsymmetric binucleating ligand with two coordinating phenol groups. The two manganese ions, with a Mn-Mn distance of 3.498 angstrom, are bridged by the two bidentate acetate ligands and the 4-methylphenolate group of the ligand, resulting in a N3O3 and N2O4 donor set of Mn-II and Mn-II, respectively. Electrochemically [Mn2(II,III)L(mu-OAc)(2)](+) is reduced to [(Mn2L)-L-II,II(mu-OAc)(2)] at E-1/2(1)=-0.53 V versus Fc(+/0) and oxidised to [(Mn2L)-L-III,III(mu-OAC)(2)](2+) at E-1/2(2)=0.38 V versus Fc(+/0). All three redox states have been characterised by EPR, IR and UV/Vis spectroscopy. Subsequent oxidation of [(Mn2L)-L-II,III(mu-OAc)(2)](2+) [E-1/2(3)=0.75 V vs. Fc(+/0)] in dry acetonitrile results in an unstable primary product with a lifetime of about 100 ins. At high scan rates quasireversible voltammetric behaviour is found for all three electrode processes, with particularly slow electron transfer for the II,III/II,II [k(o)(1) = 0.002 cms(-1) and III,III/II,III [k(o)(2) = 0.005 cms(-1)] couples, which can be rationalised in terms of major distortions of the Mn-II centres. In aqueous media the bridging acetates are replaced by water-derived ligands. Deprotonation of these stabilises higher valence states, and photo-induced oxidation of the manganese complex results in a (Mn2L)-L-IlI,IV complex with oxo or hydroxo bridging ligands, which is further oxidised to an EPR-silent product. These results demonstrate that a larger number of metal-centred oxidations can be compressed in a narrow potential range if build up of charge is avoided by charge-compensating reactions.
|
|
4. |
- Arkhypchuk, Anna I., et al.
(author)
-
Redox Switching in Ethenyl- Bridged Bisphospholes
- 2014
-
In: Chemistry - A European Journal. - : Wiley. - 0947-6539 .- 1521-3765. ; 20:49, s. 16083-16087
-
Journal article (peer-reviewed)abstract
- A 2e(-)/2H(+) redox platform has been implemented in the ethenyl-bridged bisphosphol-3-ol 1 to afford the first phospholes that feature chemically reversible oxidations. Oxidation of the title compounds to the corresponding bisphosphol-3-one 2 leads to a change in conjugation topology and a concomitant hypsochromic shift of the lowest-energy absorption maximum by 100nm. Electrochemical oxidation proceeds without any detectable intermediates, whereas the deprotonated form of 1 can be observed in an aprotic medium during the reduction of 2. This dianionic intermediate 3 is characterized by end absorptions that are bathochromically shifted by circa 200nm compared to those of 2.
|
|
5. |
- Aster, Alexander, et al.
(author)
-
Metal vs. ligand protonation and the alleged proton-shuttling role of the azadithiolate ligand in catalytic H-2 formation with FeFe hydrogenase model complexes
- 2019
-
In: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 10:21, s. 5582-5588
-
Journal article (peer-reviewed)abstract
- Electron and proton transfer reactions of diiron complexes [Fe(2)adt(CO)(6)] (1) and [Fe(2)adt(CO)(4)(PMe3)(2)] (4), with the biomimetic azadithiolate (adt) bridging ligand, have been investigated by real-time IR- and UV-vis-spectroscopic observation to elucidate the role of the adt-N as a potential proton shuttle in catalytic H-2 formation. Protonation of the one-electron reduced complex, 1(-), occurs on the adt-N yielding 1H and the same species is obtained by one-electron reduction of 1H(+). The preference for ligand vs. metal protonation in the Fe-2(i,0) state is presumably kinetic but no evidence for tautomerization of 1H to the hydride 1Hy was observed. This shows that the adt ligand does not work as a proton relay in the formation of hydride intermediates in the reduced catalyst. A hydride intermediate 1HHy(+) is formed only by protonation of 1H with stronger acid. Adt protonation results in reduction of the catalyst at much less negative potential, but subsequent protonation of the metal centers is not slowed down, as would be expected according to the decrease in basicity. Thus, the adtH(+) complex retains a high turnover frequency at the lowered overpotential. Instead of proton shuttling, we propose that this gain in catalytic performance compared to the propyldithiolate analogue might be rationalized in terms of lower reorganization energy for hydride formation with bulk acid upon adt protonation.
|
|
6. |
- Beyler, Maryline, et al.
(author)
-
Pentacoordinate iron complexes as functional models of the distal iron in [FeFe] hydrogenases
- 2011
-
In: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1359-7345 .- 1364-548X. ; 47:42, s. 11662-11664
-
Journal article (peer-reviewed)abstract
- Mononuclear pentacoordinate iron complexes with a free coordination site were prepared as mimics of the distal Fe (Fe(d)) in the active site of [FeFe] hydrogenases. The complexes catalyze the electrochemical reduction of protons at mild overpotential.
|
|
7. |
|
|
8. |
|
|
9. |
|
|
10. |
- Canton, Sophie, et al.
(author)
-
Toward Highlighting the Ultrafast Electron Transfer Dynamics at the Optically Dark Sites of Photocatalysts
- 2013
-
In: The Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 4:11, s. 1972-1976
-
Journal article (peer-reviewed)abstract
- Building a detailed understanding of the structure function relationship is a crucial step in the optimization of molecular photocatalysts employed in water splitting schemes. The optically dark nature of their active sites usually prevents a complete mapping of the photoinduced dynamics. In this work, transient X-ray absorption spectroscopy highlights the electronic and geometric changes that affect such a center in a bimetallic model complex. Upon selective excitation of the ruthenium chromophore, the cobalt moiety is reduced through intramolecular electron transfer and undergoes a spin flip accompanied by an average bond elongation of 0.20 +/- 0.03 angstrom. The analysis is supported by simulations based on density functional theory structures (B3LYP*/TZVP) and FEFF 9.0 multiple scattering calculations. More generally, these results exemplify the large potential of the technique for tracking elusive intermediates that impart unique functionalities in photochemical devices.
|
|
11. |
- Chábera, Pavel, et al.
(author)
-
A low-spin Fe(iii) complex with 100-ps ligand-to-metal charge transfer photoluminescence
- 2017
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 543:7647, s. 695-699
-
Journal article (peer-reviewed)abstract
- Transition-metal complexes are used as photosensitizers1, in light-emitting diodes, for biosensing and in photocatalysis2. A key feature in these applications is excitation from the ground state to a charge-transfer state3,4; the long charge-transfer-state lifetimes typical for complexes of ruthenium5 and other precious metals are often essential to ensure high performance. There is much interest in replacing these scarce elements with Earth-abundant metals, with iron6 and copper7 being particularly attractive owing to their low cost and non-toxicity. But despite the exploration of innovative molecular designs6,8,9,10, it remains a formidable scientific challenge11 to access Earth-abundant transition-metal complexes with long-lived charge-transfer excited states. No known iron complexes are considered12 photoluminescent at room temperature, and their rapid excited-state deactivation precludes their use as photosensitizers13,14,15. Here we present the iron complex [Fe(btz)3]3+ (where btz is 3,3′-dimethyl-1,1′-bis(p-tolyl)-4,4′-bis(1,2,3-triazol-5-ylidene)), and show that the superior σ-donor and π-acceptor electron properties of the ligand stabilize the excited state sufficiently to realize a long charge-transfer lifetime of 100 picoseconds (ps) and room-temperature photoluminescence. This species is a low-spin Fe(iii) d5 complex, and emission occurs from a long-lived doublet ligand-to-metal charge-transfer (2LMCT) state that is rarely seen for transition-metal complexes4,16,17. The absence of intersystem crossing, which often gives rise to large excited-state energy losses in transition-metal complexes, enables the observation of spin-allowed emission directly to the ground state and could be exploited as an increased driving force in photochemical reactions on surfaces. These findings suggest that appropriate design strategies can deliver new iron-based materials for use as light emitters and photosensitizers.
|
|
12. |
- Chábera, Pavel, et al.
(author)
-
FeII Hexa N-Heterocyclic Carbene Complex with a 528 ps Metal-To-Ligand Charge-Transfer Excited-State Lifetime
- 2018
-
In: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 9:3, s. 459-463
-
Journal article (peer-reviewed)abstract
- The iron carbene complex [FeII(btz)3](PF6)2 (where btz = 3,3′-dimethyl-1,1′-bis(p-Tolyl)-4,4′-bis(1,2,3-Triazol-5-ylidene)) has been synthesized, isolated, and characterized as a low-spin ferrous complex. It exhibits strong metal-To-ligand charge transfer (MLCT) absorption bands throughout the visible spectrum, and excitation of these bands gives rise to a 3MLCT state with a 528 ps excited-state lifetime in CH3CN solution that is more than one order of magnitude longer compared with the MLCT lifetime of any previously reported FeII complex. The low potential of the [Fe(btz)3]3+/[Fe(btz)3]2+ redox couple makes the 3MLCT state of [FeII(btz)3]2+ a potent photoreductant that can be generated by light absorption throughout the visible spectrum. Taken together with our recent results on the [FeIII(btz)3]3+ form of this complex, these results show that the FeII and FeIII oxidation states of the same Fe(btz)3 complex feature long-lived MLCT and LMCT states, respectively, demonstrating the versatility of iron N-heterocyclic carbene complexes as promising light-harvesters for a broad range of oxidizing and reducing conditions.
|
|
13. |
|
|
14. |
- Eilers, Gerriet, et al.
(author)
-
Ligand versus metal protonation of an iron hydrogenase active site mimic
- 2007
-
In: Chemistry - A European Journal. - : Wiley. - 0947-6539 .- 1521-3765. ; 13:25, s. 7075-7084
-
Journal article (peer-reviewed)abstract
- The protonation behavior of the iron hydrogenase active-site mimic [Fe2(u-adt)(CO)4(PMe3)2] (1; adt=N-benzyl-azadithiolate) has been investigated by spectroscopic, electrochemical, and computational methods. The combination of an adt bridge and electron-donating phosphine ligands allows protonation of either the adt nitrogen to give [Fe2(μ-Hadt)(CO)4(PMe3)2]+ ([1H]+), the Fe-Fe bond to give [Fe2-(μ-adt)(μ-H)(CO)4(PMe3)2]+ ([1Hy]+), or both sites simultaneously to give [Fe2(μ-Hadt)(μ-H)(CO)4(PMe3)2]2+ ([1HHy]2+). Complex 1 and its protonation products have been characterized in acetonitrile solution by IR, 1H, and 31PNMR spectroscopy. The solution structures of all protonation states feature a basal/basal orientation of the phosphine ligands, which contrasts with the basal/apical structure of 1 in the solid state. Density functional calculations have been performed on all protonation states and a comparison between calculated and experimental spectra confirms the structural assignments. The ligand protonated complex [1H]+ (pKa =12) is the initial, metastable protonation product while the hydride [1Hy]+ (pKa=15) is the thermodynamically stable singly protonated form. Tautomerization of cation [1H]+ to [1Hy]+ does not occur spontaneously. However, it can be catalyzed by HCl (k=2.2M-1s-1), which results in the selective formation of cation [1Hy]+. The protonations of the two basic sites have strong mutual effects on their basicities such that the hydride (pKa=8) and the ammonium proton (pKa=5) of the doubly protonated cationic complex [1HHy]2+ are considerably more acidic than in the singly protonated analogues. The formation of dication [1HHy]2+ from cation [1H]+ is exceptionally slow with perchloric or trifluoromethanesulfonic acid (k= 0.15 M-1s-1), while the dication is formed substantially faster (k > 102 M-1 s-1) with hydrobromic acid. Electrochemically, 1 undergoes irreversible reduction at -2.2V versus ferrocene, and this potential shifts to -1.6, - 1.1, and -1.0 V for the cationic complexes [1H]+, [1Hy]+, and [1HHy]2+, respectively, upon protonation. The doubly protonated form [1HHy]2+ is reduced at less negative potential than all previously reported hydrogenase models, although catalytic proton reduction at this potential is characterized by slow turnover.
|
|
15. |
- Eilers, Gerriet, 1973-
(author)
-
Molecular Approaches to Photochemical Solar Energy Conversion : Towards Synthetic Catalysts for Water Oxidation and Proton Reduction
- 2007
-
Doctoral thesis (other academic/artistic)abstract
- A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor.The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation.A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.
|
|
16. |
- Fredin, Lisa, et al.
(author)
-
Photochemistry of iron(III) carbenes
- 2017
-
In: Abstracts of Papers of the American Chemical Society. - : AMER CHEMICAL SOC. - 0065-7727. ; 254
-
Journal article (other academic/artistic)
|
|
17. |
|
|
18. |
|
|
19. |
|
|
20. |
|
|
21. |
- Hammarström, Leif, et al.
(author)
-
Time-Resolved Laser Spectroscopy in Molecular Devices for Solar Energy Conversion
- 2017
-
In: Molecular Devices for Solar Energy Conversion and Storage. - Singapore : Springer Singapore. - 2196-6990 .- 2196-6982. - 9789811059230 - 9789811059247 ; , s. 385-432
-
Book chapter (other academic/artistic)abstract
- A complete characterization of solar energy conversion devices and the processes underlying their function is a challenge, and require a multitude of different experimental methods. This chapter discusses investigations of molecular solar cells and solar fuels devices by time-resolved laser spectroscopic methods. These methods have established important concepts we now use for understanding the function of devices for solar energy conversion into primary products. We give examples of scientific insight provided by ultrafast methods using detection in the regions from X-ray to THz radiation, and particularly highlight the case where the use of different methods has provided complementary information. Charge collection and solar fuel catalysis on the other hand occur on longer time scales, which opens for the use of time-resolved magnetic resonance and microwave conductivity methods. We also point out that, with suitable precautions, time-resolved laser spectroscopy is able to give information relevant for in operando device conditions
|
|
22. |
- Harlang, Tobias C. B., et al.
(author)
-
Iron sensitizer converts light to electrons with 92% yield
- 2015
-
In: Nature Chemistry. - 1755-4330 .- 1755-4349. ; 7:11, s. 883-889
-
Journal article (peer-reviewed)abstract
- Solar energy conversion in photovoltaics or photocatalysis involves light harvesting, or sensitization, of a semiconductor or catalyst as a first step. Rare elements are frequently used for this purpose, but they are obviously not ideal for large-scale implementation. Great efforts have been made to replace the widely used ruthenium with more abundant analogues like iron, but without much success due to the very short-lived excited states of the resulting iron complexes. Here, we describe the development of an iron-nitrogen-heterocyclic-carbene sensitizer with an excited-state lifetime that is nearly a thousand-fold longer than that of traditional iron polypyridyl complexes. By the use of electron paramagnetic resonance, transient absorption spectroscopy, transient terahertz spectroscopy and quantum chemical calculations, we show that the iron complex generates photoelectrons in the conduction band of titanium dioxide with a quantum yield of 92% from the 3MLCT (metal-to-ligand charge transfer) state. These results open up possibilities to develop solar energy-converting materials based on abundant elements.
|
|
23. |
- Harlang, Tobias, et al.
(author)
-
Iron sensitizer converts light to electrons with 92% yield.
- 2015
-
In: Nature Chemistry. - : Springer Science and Business Media LLC. - 1755-4330 .- 1755-4349. ; 7:11, s. 883-889
-
Journal article (peer-reviewed)abstract
- Solar energy conversion in photovoltaics or photocatalysis involves light harvesting, or sensitization, of a semiconductor or catalyst as a first step. Rare elements are frequently used for this purpose, but they are obviously not ideal for large-scale implementation. Great efforts have been made to replace the widely used ruthenium with more abundant analogues like iron, but without much success due to the very short-lived excited states of the resulting iron complexes. Here, we describe the development of an iron-nitrogen-heterocyclic-carbene sensitizer with an excited-state lifetime that is nearly a thousand-fold longer than that of traditional iron polypyridyl complexes. By the use of electron paramagnetic resonance, transient absorption spectroscopy, transient terahertz spectroscopy and quantum chemical calculations, we show that the iron complex generates photoelectrons in the conduction band of titanium dioxide with a quantum yield of 92% from the (3)MLCT (metal-to-ligand charge transfer) state. These results open up possibilities to develop solar energy-converting materials based on abundant elements.
|
|
24. |
|
|
25. |
|
|
26. |
- Ilic, Aleksandra, et al.
(author)
-
Photoredox catalysis via consecutive 2LMCT- and 3MLCT-excitation of an Fe(iii/ii)–N-heterocyclic carbene complex
- 2022
-
In: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 13:32, s. 9165-9175
-
Journal article (peer-reviewed)abstract
- Fe-N-heterocyclic carbene (NHC) complexes attract increasing attention as photosensitisers and photoredox catalysts. Such applications generally rely on sufficiently long excited state lifetimes and efficient bimolecular quenching, which leads to there being few examples of successful usage of Fe-NHC complexes to date. Here, we have employed [Fe(iii)(btz)(3)](3+) (btz = (3,3 '-dimethyl-1,1 '-bis(p-tolyl)-4,4 '-bis(1,2,3-triazol-5-ylidene))) in the addition of alkyl halides to alkenes and alkynes via visible light-mediated atom transfer radical addition (ATRA). Unlike other Fe-NHC complexes, [Fe(iii/ii)(btz)(3)](3+/2+) benefits from sizable charge transfer excited state lifetimes >= 0.1 ns in both oxidation states, and the Fe(iii) (LMCT)-L-2 and Fe(ii) (MLCT)-M-3 states are strong oxidants and reductants, respectively. The combined reactivity of both excited states enables efficient one-electron reduction of the alkyl halide substrate under green light irradiation. The two-photon mechanism proceeds via reductive quenching of the Fe(iii) (LMCT)-L-2 state by a sacrificial electron donor and subsequent excitation of the Fe(ii) product to its highly reducing (MLCT)-M-3 state. This route is shown to be more efficient than the alternative, where oxidative quenching of the less reducing Fe(iii) (LMCT)-L-2 state by the alkyl halide drives the reaction, in the absence of a sacrificial electron donor.
|
|
27. |
- Jane, Reuben T., et al.
(author)
-
Redox hysteresis on carbon electrodes covalently modified with a bistable ruthenium complex
- 2015
-
In: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7526 .- 2050-7534. ; 3:24, s. 6260-6265
-
Journal article (peer-reviewed)abstract
- A ruthenium complex bearing an ambidentate ligand was covalently attached to glassy carbon and carbon fiber electrodes by reduction of an aryldiazonium anchoring group placed on the terpyridine spectator ligand. The diazonium grafting method results in robust attachment and yields high surface concentrations of 2.4 x 10(-10) mol cm(-2). The attached complexes can be addressed electrochemically and the electrodes were characterized with scan rates of up to 2000 V s(-1). The redox-induced N/O linkage isomerism of the pyridyl/alkoxy ambidentate ligand results in a hysteretic current-voltage response (E-1 degrees = 0.83, E-2 degrees = 0.34 V) of the modified electrodes. The immobilization has no deleterious effects on the isomerization reactions of the molecular material that proceed with thermodynamic (2.4 < pK(1) < 3.7 (Ru(III) O -> N), -6.0 < pK(2) < -4.8 (Ru(II) O -> N)) and kinetic parameters (k(b1) = 2.5 x 10(2) s(-1) (Ru(III) N -> O), k(f2) = 2.5 x 10(2) s(-1) (Ru(II) O -> N)) comparable to analogous complexes in homogeneous solution.
|
|
28. |
- Jane, R. T., et al.
(author)
-
Surface modification of carbon and metal electrodes with bistable molecular redox switches by click and amide coupling
- 2015
-
In: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7526 .- 2050-7534. ; 3:38, s. 10023-10030
-
Journal article (peer-reviewed)abstract
- Ruthenium complexes [Ru(R-Ph-tpy)(bpyMeOHpy)] (Ph-tpy = 4'-(4-R-phenyl)-2,2':6',2 ''-terpyridine, R = NH2, COOH, CRCH, bpyMeOHpy = 1-[6-(2,2'-bipyridyl)]-1-(2-pyridyl)-ethanol) were covalently attached to carbon and metal electrodes by amide and click coupling reactions. Coupling agents were covalently grafted onto the electrodes by electrochemical reduction of p-functionalized diazonium tethers X-Ph-N-2(+) (X = COOH, NO2, N-3) followed by electrochemical reduction of the nitro tether. The modification of the electrode surfaces with the Ru complexes results in a hysteretic current-voltage response based on the redox-induced N-6/N5O linkage isomerism of the ambidentate pyridyl/alkoxy unit in the bpyMeOHpy chelate ligand. The immobilized complexes can be exhaustively addressed electrochemically with scan rates <= 10000 V s(-1) and can switch uniformly with kinetic and thermodynamic parameters similar to the properties of reference complexes in homogeneous solution.
|
|
29. |
- Johansson, Olof, et al.
(author)
-
Bistable Molecular Switches Based on Linkage Isomerization in Ruthenium Polypyridyl Complexes with a Ligand-Bound Ambidentate Motif
- 2009
-
In: Chemistry - A European Journal. - : Wiley. - 0947-6539 .- 1521-3765. ; 15:5, s. 1195-1204
-
Journal article (peer-reviewed)abstract
- Electron-transfer-induced linkage isomerization was investigated in a series of bis-tridentate Ru polypyridyl complexes [Ru(L-X-OH)(Y-tpy)](2+) with ambidentate ligand L-X-OH bpy-C(R)(OH)-py (bpy-2,2'-bipyridine py-pyridine; R-H, Me, Ph, or tBu) and spectator ligand Y-tpy (tpy 2.2':6',2 ''-terpyridine, Y-p-tolyl, p-PhCO2Me, Cl, OEt, N-pyrrolidine). The ligand-bound ambidentate motif switches reversibly between N and O coordination in the Ru-II and Ru-III state,respectively. The potentials of the Ru-III/II couple differ by about 0.5 V between the isomers, and this results in a bistable electrochemical response of the molecular switches. The effects of structural modifications in form of substituents on the linking carbon atom of the ambidentate ligand and on the central pyridine moiety of the spectator ligand were investigated by electrochemical and computational methods. Differences in isomerization behavior span six orders of magnitude in rate constants and two orders of magnitude in equilibrium constants. The results can be interpreted in terms of steric and electronic substituent effects and their influence on rotational barriers, ligation geometry, and electron deficiency of the metal center.
|
|
30. |
|
|
31. |
|
|
32. |
|
|
33. |
|
|
34. |
- Johansson, Olof, et al.
(author)
-
Molecular hysteresis in a rigid dinuclear ruthenium polypyridyl complex incorporating a ligand-bound ambidentate motif
- 2008
-
In: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 47:13, s. 5531-5533
-
Journal article (peer-reviewed)abstract
- Two alternative Ru-2(2+/3+) mixed-valence states are formed in the first dinuclear Ru complex with a ligand-bound ambidentate motif. The hysteretic electrochemical response follows a double-square scheme where the structure of the mixed-valence state depends on the previous isovalent state. The Ru3+ state of the pyrrolidine-substituted bisterpyridine unit is characterized by intense ligand-to-metal charge-transfer absorptions that provide a distinctive signature of the corresponding mixed-valence state.
|
|
35. |
|
|
36. |
|
|
37. |
|
|
38. |
- Johnson, Catherine, et al.
(author)
-
Ferrous and ferric complexes with cyclometalating N-heterocyclic carbene ligands : a case of dual emission revisited
- 2023
-
In: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 14:37, s. 10129-10139
-
Journal article (peer-reviewed)abstract
- Iron N-heterocyclic carbene (FeNHC) complexes with long-lived charge transfer states are emerging as a promising class of photoactive materials. We have synthesized [Fe-II(ImP)(2)] (ImP = bis(2,6-bis(3-methylimidazol-2-ylidene-1-yl)phenylene)) that combines carbene ligands with cyclometalation for additionally improved ligand field strength. The 9 ps lifetime of its (MLCT)-M-3 (metal-to-ligand charge transfer) state however reveals no benefit from cyclometalation compared to Fe(II) complexes with NHC/pyridine or pure NHC ligand sets. In acetonitrile solution, the Fe(II) complex forms a photoproduct that features emission characteristics (450 nm, 5.1 ns) that were previously attributed to a higher ((MLCT)-M-2) state of its Fe(III) analogue [Fe-III(ImP)(2)](+), which led to a claim of dual (MLCT and LMCT) emission. Revisiting the photophysics of [Fe-III(ImP)(2)](+), we confirmed however that higher ((MLCT)-M-2) states of [Fe-III(ImP)(2)](+) are short-lived (<10 ps) and therefore, in contrast to the previous interpretation, cannot give rise to emission on the nanosecond timescale. Accordingly, pristine [Fe-III(ImP)(2)](+) prepared by us only shows red emission from its lower (LMCT)-L-2 state (740 nm, 240 ps). The long-lived, higher energy emission previously reported for [Fe-III(ImP)(2)](+) is instead attributed to an impurity, most probably a photoproduct of the Fe(II) precursor. The previously reported emission quenching on the nanosecond time scale hence does not support any excited state reactivity of [Fe-III(ImP)(2)](+) itself.
|
|
39. |
- Kaul, Nidhi, et al.
(author)
-
The Carbene Cannibal : Photoinduced Symmetry-Breaking Charge Separation in an Fe(III) N-Heterocyclic Carbene
- 2021
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 143:29, s. 10816-10821
-
Journal article (peer-reviewed)abstract
- Photoinduced symmetry-breaking charge separation (SB-CS) processes offer the possibility of harvesting solar energy by electron transfer between identical molecules. Here, we present the first case of direct observation of bimolecular SB-CS in a transition metal complex, [(FeL2)-L-III](PF6) (L = [phenyl(tris(3-methylimidazol-1-ylidene))borate](-)). Photoexcitation of the complex in the visible region results in the formation of a doublet ligand-to-metal charge transfer ((LMCT)-L-2) excited state (E0-0 = 2.13 eV), which readily reacts with the doublet ground state to generate charge separated products, [(FeL2)-L-II] and [(FeL2)-L-IV](2+), with a measurable cage escape yield. Known spectral signatures allow for unambiguous identification of the products, whose formation and recombination are monitored with transient absorption spectroscopy. The unusual energetic landscape of [(FeL2)-L-III](+), as reflected in its ground and excited state reduction potentials, results in SB-CS being intrinsically exergonic (Delta G(CS)degrees similar to -0.7 eV). This is in contrast to most systems investigated in the literature, where Delta C-CS degrees is close to zero, and the charge transfer driven primarily by solvation effects. The study is therefore illustrative for the utilization of the rich redox chemistry accessible in transition metal complexes for the realization of SB-CS.
|
|
40. |
- Kaur-Ghumaan, Sandeep, et al.
(author)
-
Catalytic Hydrogen Evolution from Mononuclear Iron(II) Carbonyl Complexes as Minimal Functional Models of the [FeFe] Hydrogenase Active Site
- 2010
-
In: Angewandte Chemie International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 49:43, s. 8033-8036
-
Journal article (peer-reviewed)abstract
- How much iron does it take? Mononuclear complexes [FeII(3,6-R2bdt)(CO)2(PMe3)2] (bdt=1,2-C6H4(S−)2; R=H, Cl) can be reversibly protonated at the sulfur ligands, can catalyze the electrochemical reduction of protons, and are thus minimal functional models of the [FeFe] hydrogenases (see scheme). DFT calculations show that cleavage of an FeS bond leads to the generation of a free coordination site, which is crucial for the formation of hydrides that are key intermediates in the generation of hydrogen.
|
|
41. |
- Kjær, Kasper Skov, et al.
(author)
-
Luminescence and reactivity of a charge-transfer excited iron complex with nanosecond lifetime
- 2019
-
In: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 363:6424, s. 249-253
-
Journal article (peer-reviewed)abstract
- Iron’s abundance and rich coordination chemistry are potentially appealing features for photochemical applications. However, the photoexcitable charge-transfer (CT) states of most Fe complexes are limited by picosecond or sub-picosecond deactivation through low-lying metal centered (MC) states, resulting in inefficient electron transfer reactivity and complete lack of photoluminescence. Here we show that octahedral coordination of Fe(III) by two mono-anionic facial tris-carbene ligands can suppress such deactivation dramatically. The resulting complex [Fe(phtmeimb)2]+, where phtmeimb is [phenyl(tris(3-methylimidazol-1-ylidene))borate]-, exhibits strong, visible, room temperature photoluminescence with a 2.0 ns lifetime and 2% quantum yield via spin-allowed transition from a ligand-to-metal charge-transfer (2 LMCT) state to the ground state (2 GS). Reductive and oxidative electron transfer reactions were observed for the2 LMCT state of [Fe(phtmeimb)2]+ in bimolecular quenching studies with methylviologen and diphenylamine.
|
|
42. |
|
|
43. |
- Lindh, Linnea, et al.
(author)
-
Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality
- 2021
-
In: Chemical Science. - : Royal Society of Chemistry (RSC). - 2041-6520 .- 2041-6539. ; 12:48, s. 16035-16053
-
Journal article (peer-reviewed)abstract
- A new generation of octahedral iron(ii)-N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push-pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push-pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I−/I3−redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO2. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO2. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO2back to the oxidized dye, leaving only 5-10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6-8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.
|
|
44. |
- Liseev, Timofey, 1991-
(author)
-
Toward functional Metal-Organic Frameworks: molecular doping, depth profiling, and surface growth
- 2021
-
Doctoral thesis (other academic/artistic)abstract
- In this thesis, selected synthetic aspects of functional Metal-Organic Frameworks (MOFs) are considered. More specifically, the work is focused on MOFs doped with functional molecules in the role of structural linkers. In the first part, preparation of such MOF/molecular catalyst hybrid materials of two topologies UiO (UiO = Universitet i Oslo) and NU-1000 (NU = Northwestern University) – is investigated and three different synthetic pathways to these materials are studied. In the second part, a novel MOF depth profiling technique – Rutherford Backscattering Spectrometry – is introduced and then used to elucidate depth distribution of molecules post-synthetically introduced into a MOF. In the last part, efficient interfacing of MOFs with electrodes is considered and a methodology for growing surface-mounted layer-pillar-type M2L2P MOFs (SURMOFs, M = metal, L = layer linker, P = pillar linker) with high degree of orientation and thickness control on bare Si substrates is developed.
|
|
45. |
- Liu, Tianfei, et al.
(author)
-
Accelerating proton-coupled electron transfer of metal hydrides in catalyst model reactions
- 2018
-
In: Nature Chemistry. - : Springer Science and Business Media LLC. - 1755-4330 .- 1755-4349. ; 10:8, s. 881-887
-
Journal article (peer-reviewed)abstract
- Metal hydrides are key intermediates in catalytic proton reduction and dihydrogen oxidation. There is currently much interest in appending proton relays near the metal centre to accelerate catalysis by proton-coupled electron transfer (PCET). However, the elementary PCET steps and the role of the proton relays are still poorly understood, and direct kinetic studies of these processes are scarce. Here, we report a series of tungsten hydride complexes as proxy catalysts, with covalently attached pyridyl groups as proton acceptors. The rate of their PCET reaction with external oxidants is increased by several orders of magnitude compared to that of the analogous systems with external pyridine on account of facilitated proton transfer. Moreover, the mechanism of the PCET reaction is altered by the appended bases. A unique feature is that the reaction can be tuned to follow three distinct PCET mechanisms-electron-first, proton-first or a concerted reaction-with very different sensitivities to oxidant and base strength. Such knowledge is crucial for rational improvements of solar fuel catalysts.
|
|
46. |
|
|
47. |
|
|
48. |
- Lomoth, Reiner, et al.
(author)
-
Introducing a dark reaction to photochemistry : photocatalytic hydrogen from [FeFe] hydrogenase active site model complexes
- 2009
-
In: Dalton Transactions. - : Royal Society of Chemistry (RSC). - 1477-9226 .- 1477-9234. ; :45, s. 9952-9959
-
Journal article (peer-reviewed)abstract
- The light-driven splitting of water into its constituting elements gives access to a valuable fuel from an abundant substrate, using sunlight as the only energy source. Synthetic diiron complexes as functional models of the [FeFe] hydrogenase H(2)ase enzyme active site have moved into the centre of focus as potentially viable catalysts for the reductive side of this process, i.e. the reduction of protons to molecular hydrogen. The active site of the enzyme, as well as its mimics in an artificial system, are required to accumulate two electrons from single electron transfer events and to combine them with two protons to form hydrogen. Whereas in biology this reaction is not coupled to photosynthesis and thus proceeds in the dark, additional aspects need to be considered when designing a functional artificial system for the light-driven reduction of protons. Suitable photosensitizers have to be chosen that not only provide sufficient driving force for the reduction of the synthetic diiron catalyst, but also allow for selective excitation to minimize photodegradation. Electron transfer efficiencies have to be optimized for all steps and the sequential nature of the catalyst reduction requires a sufficient stability of potentially labile intermediates of the catalytic cycle. In this perspective, systems for the light-driven conversion of protons to molecular hydrogen are discussed where the catalyst is based on model complexes of the [FeFe] H(2)ase active site. Covalently linked dyads, supramolecular assemblies and multi-component systems will be examined with an emphasis on mechanistic electron transfer schemes, the properties of the individual components, their scope and their potential limitations.
|
|
49. |
|
|
50. |
|
|