| 1. |
- Fomalont, E. B., et al.
(author)
-
THE 2014 ALMA LONG BASELINE CAMPAIGN: AN OVERVIEW
- 2015
-
In: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 808:1
-
Journal article (peer-reviewed)abstract
- A major goal of the Atacama Large Millimeter/submillimeter Array (ALMA) is to make accurate images with resolutions of tens of milliarcseconds, which at submillimeter (submm) wavelengths requires baselines up to similar to 15 km. To develop and test this capability, a Long Baseline Campaign (LBC) was carried out from 2014 September to late November, culminating in end-to-end observations, calibrations, and imaging of selected Science Verification (SV) targets. This paper presents an overview of the campaign and its main results, including an investigation of the short-term coherence properties and systematic phase errors over the long baselines at the ALMA site, a summary of the SV targets and observations, and recommendations for science observing strategies at long baselines. Deep ALMA images of the quasar 3C 138 at 97 and 241 GHz are also compared to VLA 43 GHz results, demonstrating an agreement at a level of a few percent. As a result of the extensive program of LBC testing, the highly successful SV imaging at long baselines achieved angular resolutions as fine as 19 mas at similar to 350 GHz. Observing with ALMA on baselines of up to 15 km is now possible, and opens up new parameter space for submm astronomy.
|
|
| 2. |
- Adam, R. M., et al.
(author)
-
The XXL Survey: LI. Pressure profile and Y SZ -M scaling relation in three low-mass galaxy clusters at z∼1 observed with NIKA2
- 2024
-
In: Astronomy and Astrophysics. - 0004-6361 .- 1432-0746. ; 684
-
Journal article (peer-reviewed)abstract
- Context. The thermodynamical properties of the intracluster medium (ICM) are driven by scale-free gravitational collapse, but they also reflect the rich astrophysical processes at play in galaxy clusters. At low masses (∼1014M) and high redshift (z≳1), these properties remain poorly constrained, observationally speaking, due to the difficulty in obtaining resolved and sensitive data. Aims. We aim to investigate the inner structure of the ICM as seen through the Sunyaev-Zel’dovich (SZ) effect in this regime of mass and redshift. We focused on the thermal pressure profile and the scaling relation between SZ flux and mass, namely the YSZ-M scaling relation. Methods. The three galaxy clusters XLSSC 072 (z=1.002), XLSSC 100 (z=0.915), and XLSSC 102 (z=0.969), with M500∼2×1014M, were selected from the XXL X-ray survey and observed with the NIKA2 millimeter camera to image their SZ signal. XMM-Newton X-ray data were used as a complement to the NIKA2 data to derive masses based on the YX-M relation and the hydrostatic equilibrium. Results. The SZ images of the three clusters, along with the X-ray and optical data, indicate dynamical activity related to merging events. The pressure profile is consistent with that expected for morphologically disturbed systems, with a relatively flat core and a shallow outer slope. Despite significant disturbances in the ICM, the three high-redshift low-mass clusters follow the YSZ-M relation expected from standard evolution remarkably well. Conclusions. These results indicate that the dominant physics that drives cluster evolution is already in place by z∼1, at least for systems with masses above M500∼1014M.
|
|
| 3. |
- André, Ph., et al.
(author)
-
Probing the cold magnetised Universe with SPICA-POL (B-BOP)
- 2019
-
In: Publications Astronomical Society of Australia. - : Cambridge University Press (CUP). - 1323-3580 .- 1448-6083. ; 36
-
Research review (peer-reviewed)abstract
- Space Infrared Telescope for Cosmology and Astrophysics (SPICA), the cryogenic infrared space telescope recently pre-selected for a 'Phase A' concept study as one of the three remaining candidates for European Space Agency (ESA's) fifth medium class (M5) mission, is foreseen to include a far-infrared polarimetric imager [SPICA-POL, now called B-fields with BOlometers and Polarizers (B-BOP)], which would offer a unique opportunity to resolve major issues in our understanding of the nearby, cold magnetised Universe. This paper presents an overview of the main science drivers for B-BOP, including high dynamic range polarimetric imaging of the cold interstellar medium (ISM) in both our Milky Way and nearby galaxies. Thanks to a cooled telescope, B-BOP will deliver wide-field 100-350 mu m images of linearly polarised dust emission in Stokes Q and U with a resolution, signal-to-noise ratio, and both intensity and spatial dynamic ranges comparable to those achieved by Herschel images of the cold ISM in total intensity (Stokes I). The B-BOP 200 mu m images will also have a factor similar to 30 higher resolution than Planck polarisation data. This will make B-BOP a unique tool for characterising the statistical properties of the magnetised ISM and probing the role of magnetic fields in the formation and evolution of the interstellar web of dusty molecular filaments giving birth to most stars in our Galaxy. B-BOP will also be a powerful instrument for studying the magnetism of nearby galaxies and testing Galactic dynamo models, constraining the physics of dust grain alignment, informing the problem of the interaction of cosmic rays with molecular clouds, tracing magnetic fields in the inner layers of protoplanetary disks, and monitoring accretion bursts in embedded protostars.
|
|
| 4. |
- Albertsen, L., et al.
(author)
-
Diversion of Flux toward Sesquiterpene Production in Saccharomyces cerevisiae by Fusion of Host and Heterologous Enzymes
- 2011
-
In: Applied and Environmental Microbiology. - 1098-5336 .- 0099-2240. ; 77:3, s. 1033-1040
-
Journal article (peer-reviewed)abstract
- The ability to transfer metabolic pathways from the natural producer organisms to the well-characterized cell factory Saccharomyces cerevisiae is well documented. However, as many secondary metabolites are produced by collaborating enzymes assembled in complexes, metabolite production in yeast may be limited by the inability of the heterologous enzymes to collaborate with the native yeast enzymes. This may cause loss of intermediates by diffusion or degradation or due to conversion of the intermediate through competitive pathways. To bypass this problem, we have pursued a strategy in which key enzymes in the pathway are expressed as a physical fusion. As a model system, we have constructed several fusion protein variants in which farnesyl diphosphate synthase (FPPS) of yeast has been coupled to patchoulol synthase (PTS) of plant origin (Pogostemon cablin). Expression of the fusion proteins in S. cerevisiae increased the production of patchoulol, the main sesquiterpene produced by PTS, up to 2-fold. Moreover, we have demonstrated that the fusion strategy can be used in combination with traditional metabolic engineering to further increase the production of patchoulol. This simple test case of synthetic biology demonstrates that engineering the spatial organization of metabolic enzymes around a branch point has great potential for diverting flux toward a desired product.
|
|
| 5. |
- Ritacco, A., et al.
(author)
-
NIKA 150 GHz polarization observations of the Crab nebula and its spectral energy distribution
- 2018
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 616
-
Journal article (peer-reviewed)abstract
- The Crab nebula is a supernova remnant exhibiting a highly polarized synchrotron radiation at radio and millimetre wavelengths. It is the brightest source in the microwave sky with an extension of 7 by 5 arcmin, and is commonly used as a standard candle for any experiment which aims to measure the polarization of the sky. Though its spectral energy distribution has been well characterized in total intensity, polarization data are still lacking at millimetre wavelengths. We report in this paper high resolution observations (18 00 FWHM) of the Crab nebula in total intensity and linear polarization at 150 GHz with the NIKA camera. NIKA, operated at the IRAM 30 m telescope from 2012 to 2015, is a camera made of Lumped Element Kinetic Inductance Detectors (LEKIDs) observing the sky at 150 and 260 GHz. From these observations we are able to reconstruct the spatial distribution of the polarization degree and angle of the Crab nebula, which is found to be compatible with previous observations at lower and higher frequencies. Averaging across the source and using other existing data sets we find that the Crab nebula polarization angle is consistent with being constant over a wide range of frequencies with a value of -87.7 degrees +/- 0.3 in Galactic coordinates. We also present the first estimation of the Crab nebula spectral energy distribution polarized flux in a wide frequency range: 30-353 GHz. Assuming a single power law emission model we find that the polarization spectral index beta(pol) = -0.347 +/- 0.026 is compatible with the intensity spectral index beta = -0.323 +/- 0.001.
|
|
| 6. |
- Böckler, H B, et al.
(author)
-
Metrology infrastructure for high-pressure gas and liquified hydrogen flows. A brief outline of the MetHyInfra project, measurement challenges, and first results
- 2024
-
In: Measurement. - : Elsevier B.V.. - 0263-2241 .- 1873-412X. ; 232
-
Journal article (peer-reviewed)abstract
- This paper gives an overview of the ongoing Joint Research Project (JRP) 20IND11 “Metrology infrastructure for high pressure gas and liquefied hydrogen flows” (MetHyInfra), which will ensure traceability in the hydrogen distribution chain. For this purpose, very precise nozzles with well-defined geometries have been produced. In this project, Critical Flow Venturi Nozzles (CFVNs) will be traceably calibrated for the first time with hydrogen and pressures up to 100 MPa using a Coriolis Flow Meter (CFM) as a secondary standard. A CFM has been successfully calibrated with hydrogen against a gravimetric primary standard. Equations of State (EoS) are important for the high-pressure calibration of the nozzles, but also for Computational Fluid Dynamics (CFD) simulations. With regard to CFD, a numerical model has been developed to simulate high pressure hydrogen flow in the CFVN. In a parameter study, non-ideal nozzle shapes are investigated using a shape variation parameter. New Speed of Sound (SoS) measurements were conducted at temperatures from 273 to 323 K and pressures from 1 to 100 MPa. These new data were then used to develop a new EoS for normal hydrogen, optimized for gas phase calculations. In addition to gaseous hydrogen, the project has a strong focus on liquefied hydrogen. Here a three-pronged approach allows traceable measurements. Each of the approaches presented is based on a unique flow calibration principle and relies on independent traceability schemes. The results of the project will ensure traceable measurements and thus a higher level of confidence among end users. © 2024 The Authors
|
|
| 7. |
- De Simone, M., et al.
(author)
-
Glycolaldehyde in Perseus young solar analogs
- 2017
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 599
-
Journal article (peer-reviewed)abstract
- © ESO 2017. Context. The earliest evolutionary stages of low-mass protostars are characterised by the so-called hot-corino stage, when the newly born star heats the surrounding material and enrich the gas chemically. Studying this evolutionary phase of solar protostars may help understand the evolution of prebiotic complex molecules in the development of planetary systems. Aims. In this paper we focus on the occurrence of glycolaldehyde (HCOCH 2 OH) in young solar analogs by performing the first homogeneous and unbiased study of this molecule in the Class 0 protostars of the nearby Perseus star forming region. Methods. We obtained sub-arcsec angular resolution maps at 1.3 mm and 1.4 mm of glycolaldehyde emission lines using the IRAM Plateau de Bure (PdB) interferometer in the framework of the CALYPSO IRAM large program. Results. Glycolaldehyde has been detected towards 3 Class 0 and 1 Class I protostars out of the 13 continuum sources targeted in Perseus: NGC1333-IRAS2A1, NGC1333-IRAS4A2, NGC1333-IRAS4B1, and SVS13-A. The NGC1333 star forming region looks particularly glycolaldehyde rich, with a rate of occurrence up to 60%. The glycolaldehyde spatial distribution overlaps with the continuum one, tracing the inner 100 au around the protostar. A large number of lines (up to 18), with upper-level energies E u from 37 K up to 375 K has been detected. We derived column densities ≥10 15 cm -2 and rotational temperatures T rot between 115 K and 236 K, imaging for the first time hot-corinos around NGC1333-IRAS4B1 and SVS13-A. Conclusions. In multiple systems glycolaldehyde emission is detected only in one component. The case of the SVS13-A+B and IRAS4-A1+A2 systems support that the detection of glycolaldehyde (at least in the present Perseus sample) indicates older protostars (i.e. SVS13-A and IRAS4-A2), evolved enough to develop the hot-corino region (i.e. 100 K in the inner 100 au). However, only two systems do not allow us to firmly conclude whether the primary factor leading to the detection of glycolaldehyde emission is the environments hosting the protostars, evolution (e.g. low value of L submm /L int ), or accretion luminosity (high L int ).
|
|
| 8. |
|
|
| 9. |
- Maury, J., et al.
(author)
-
EasyCloneMulti: A Set of Vectors for Simultaneous and Multiple Genomic Integrations in Saccharomyces cerevisiae
- 2016
-
In: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203 .- 1932-6203. ; 11:3
-
Journal article (peer-reviewed)abstract
- Saccharomyces cerevisiae is widely used in the biotechnology industry for production of ethanol, recombinant proteins, food ingredients and other chemicals. In order to generate highly producing and stable strains, genome integration of genes encoding metabolic pathway enzymes is the preferred option. However, integration of pathway genes in single or few copies, especially those encoding rate-controlling steps, is often not sufficient to sustain high metabolic fluxes. By exploiting the sequence diversity in the long terminal repeats (LTR) of Ty retrotransposons, we developed a new set of integrative vectors, EasyCloneMulti, that enables multiple and simultaneous integration of genes in S. cerevisiae. By creating vector backbones that combine consensus sequences that aim at targeting subsets of Ty sequences and a quickly degrading selective marker, integrations at multiple genomic loci and a range of expression levels were obtained, as assessed with the green fluorescent protein (GFP) reporter system. The EasyCloneMulti vector set was applied to balance the expression of the rate-controlling step in the beta-alanine pathway for biosynthesis of 3-hydroxypropionic acid (3HP). The best 3HP producing clone, with 5.45 g.L-1 of 3HP, produced 11 times more 3HP than the lowest producing clone, which demonstrates the capability of EasyCloneMulti vectors to impact metabolic pathway enzyme activity.
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
- Borodina, I., et al.
(author)
-
Establishing a synthetic pathway for high-level production of 3-hydroxypropionic acid in Saccharomyces cerevisiae via beta-alanine
- 2015
-
In: Metabolic Engineering. - : Elsevier BV. - 1096-7176 .- 1096-7184. ; 27, s. 57-64
-
Journal article (peer-reviewed)abstract
- Microbial fermentation of renewable feedstocks into plastic monomers can decrease our fossil dependence and reduce global CO2 emissions. 3-Hydroxypropionic acid (3HP) is a potential chemical building block for sustainable production of superabsorbent polymers and acrylic plastics. With the objective of developing Saccharolnyces cerevisiae as an efficient cell factory for high-level production of 3HP, we identified the beta-alanine biosynthetic route as the most economically attractive according to the metabolic modeling. We engineered and optimized a synthetic pathway for de novo biosynthesis of beta-alanine and its subsequent conversion into 3HP using a novel beta-alanine-pyruvate aminotransferase discovered in Bacillus cereus. The final strain produced 3HP at a titer of 13.7 +/- 0.3 g L-1 with a 0.14 +/- 0.0 C-mol C-mol(-1) yield on glucose in 80 h in controlled fed-batch fermentation in mineral medium at pH 5, and this work therefore lays the basis for developing a process for biological 3HP production.
|
|
| 13. |
- Kildegaard, Kanchana R., et al.
(author)
-
Evolution reveals a glutathione-dependent mechanism of 3-hydroxypropionic acid tolerance
- 2014
-
In: Metabolic engineering. - : Elsevier BV. - 1096-7176 .- 1096-7184. ; 26, s. 57-66
-
Journal article (peer-reviewed)abstract
- Biologically produced 3-hydroxypropionic acid (3HP) is a potential source for sustainable acrylates and can also find direct use as monomer in the production of biodegradable polymers. For industrial scale production there is a need for robust cell factories tolerant to high concentration of 3HP, preferably at low pH. Through adaptive laboratory evolution we selected S. cerevisiae strains with improved tolerance to 3HP at pH 3.5. Genome sequencing followed by functional analysis identified the causal mutation in SFA1 gene encoding S-(hyclroxymerhyl)glutathione dehydrogenase. Based on our findings, we propose that 3HP toxicity is mediated by 3-hydroxypropionic aldehyde (reuterin ) and that glutathione-dependent reactions are used for reuterin detoxification. The identified molecular response to 3HP and reuterin may well be a general mechanism for handling resistance to organic acid and aldehydes by living cells. (C) 2014 International Metabolic Engineering Society Published by Elsevier Inc. On behalf of International Metabolic Engineering Society. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/)
|
|
| 14. |
|
|
| 15. |
- Maury, J., et al.
(author)
-
Metabolic engineering of isoprenoid production: Reconstruction of multistep heterologous pathways in tractable hosts
- 2013
-
In: Isoprenoid Synthesis in Plants and Microorganisms: New Concepts and Experimental Approaches. - New York, NY : Springer New York. - 9781461440635 ; , s. 73-89
-
Book chapter (other academic/artistic)abstract
- Isoprenoids represent a wide group of chemically active compounds that can find a wide range of applications as flavors, perfumes, vitamins, nutraceuticals, and pharmaceuticals. Many isoprenoids are naturally produced in very low quantities by plants, which make their use in broader perspectives difficult. Microbial production of plant-originating isoprenoids quickly appeared as an alternative of choice. Metabolic engineering methods were applied and proved successful to improve the supply of precursors to derive toward isoprenoid compounds of interest. Combinations between metabolic engineering and the flourishing field of synthetic biology have also been observed with researchers attempting to reconstruct and optimize complex biosynthetic pathways in well-characterized and tractable microbial hosts. In this chapter, we review recent metabolic engineering studies for isoprenoid production in yeast and try to show, through key examples, that the fields of synthetic biology and metabolic engineering can go hand in hand to establish microbial cell factories for isoprenoid production.
|
|
| 16. |
- Maury, O., et al.
(author)
-
From shared socio-economic pathways (SSPs) to oceanic system pathways (OSPs) : Building policy-relevant scenarios for global oceanic ecosystems and fisheries
- 2017
-
In: Global Environmental Change. - : Elsevier BV. - 0959-3780 .- 1872-9495. ; 45, s. 203-216
-
Journal article (peer-reviewed)abstract
- There is an urgent need for developing policy-relevant future scenarios of biodiversity and ecosystem services. This paper is a milestone toward this aim focusing on open ocean fisheries. We develop five contrasting Oceanic System Pathways (OSPs), based on the existing five archetypal worlds of Shared Socioeconomic Pathways (SSPs) developed for climate change research (e.g., Nakicenovic et al., 2014 and Riahi et al., 2016). First, we specify the boundaries of the oceanic social-ecological system under focus. Second, the two major driving forces of oceanic social-ecological systems are identified in each of three domains, viz., economy, management and governance. For each OSP (OSP1 sustainability first, OSP2 conventional trends, OSP3 dislocation, OSP4 global elite and inequality, OSP5 high tech and market), a storyline is outlined describing the evolution of the driving forces with the corresponding SSP. Finally, we compare the different pathways of oceanic social-ecological systems by projecting them in the two-dimensional spaces defined by the driving forces, in each of the economy, management and governance domains. We expect that the OSPs will serve as a common basis for future model based scenario studies in the context of the Intergovernmental Panel on Climate Change (IPCC) and the Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES).
|
|
| 17. |
- Partow, Siavash, 1979, et al.
(author)
-
Characterization of different promoters for designing a new expression vector in Saccharomyces cerevisiae
- 2010
-
In: Yeast. - : Wiley. - 1097-0061 .- 0749-503X. ; 27:11, s. 955-964
-
Journal article (peer-reviewed)abstract
- The widely used pESC vector series (Stratagene, La Jolla, CA, USA) with the bidirectional GAL1/GAL10 promoter provides the possibility of simultaneously expressing two different genes from a single vector in Saccharomyces cerevisiae. This system can be induced by galactose and is repressed by glucose. Since S. cerevisiae prefers glucose as a carbon source, and since its growth rate is higher in glucose than in galactose-containing media, we compared and evaluated seven different promoters expressed during growth on glucose (pTEF1, pADH1, pTPI1, pHXT7, pTDH3, pPGK1 and pPYK1) with two strong galactose-induced promoters (pGAL1 and pGAL10), using lacZ as a reporter gene and measuring LacZ activity in batch and continuous cultivation. TEF1 and PGK1 promoters showed the most constant activity pattern at different glucose concentrations. Based on these results, we designed and constructed two new expression vectors which contain the two constitutive promoters, TEF1 and PGK1, in opposite orientation to each other. These new vectors retain all the features from the pESC-URA plasmid except that gene expression is mediated by constitutive promoters.
|
|
| 18. |
- Seekamp, J, et al.
(author)
-
Nanoimprinted passive optical devices
- 2002
-
In: Nanotechnology. - : IOP Publishing. - 0957-4484. ; 13:5, s. 581-586
-
Journal article (peer-reviewed)abstract
- We report on the feasibility and process parameters of nanoimprint lithography to fabricate low refractive index passive optical devices. Diffraction gratings printed in polymethylmethacrylate (PMMA) exhibit a sharp dispersion with a full width at half maximum of about 20 nm. Waveguides were printed in polystyrene (PS) on silicon oxide and had losses between 8-20 dB cm(-1) at wavelengths between 650-400 nm, respectively. Finally, one-dimensional photonic structures were also printed in PS and their transmission and morphology characterized. The expected Bragg peak was observed in transmission and atomic force microscopy images have shown a good pattern transfer. A square lattice was printed in PMMA and more than 40 print cycles were obtained, i.e., potentially more than 1000 imprints from one master stamp.
|
|
| 19. |
- Singh, Karan, et al.
(author)
-
Comparing scalability prediction strategies on an SMP of CMPs
- 2010
-
In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). - Berlin, Heidelberg : Springer Berlin Heidelberg. - 1611-3349 .- 0302-9743. - 9783642152764 ; 6271:PART 1, s. 143-155
-
Conference paper (peer-reviewed)abstract
- Diminishing performance returns and increasing power consumption of single-threaded processors have made chip multiprocessors (CMPs) an industry imperative. Unfortunately, poor software/hardware interaction and bottlenecks in shared hardware structures can prevent scaling to many cores. In fact, adding a core may harm performance and increase power consumption. Given these observations, we compare two approaches to predicting parallel application scalability: multiple linear regression and artificial neural networks (ANNs). We throttle concurrency to levels with higher predicted power/performance efficiency. We perform experiments on a state-of-the-art, dual-processor, quad-core platform, showing that both methodologies achieve high accuracy and identify energy-efficient concurrency levels in multithreaded scientific applications. The ANN approach has advantages, but the simpler regression-based model achieves slightly higher accuracy and performance. The approaches exhibit median error of 7.5% and 5.6%, and improve performance by an average of 7.4% and 9.5%, respectively.
|
|
| 20. |
- Tittensor, Derek P., et al.
(author)
-
A protocol for the intercomparison of marine fishery and ecosystem models : Fish-MIP v1.0
- 2018
-
In: Geoscientific Model Development. - : Copernicus GmbH. - 1991-959X .- 1991-9603. ; 11:4, s. 1421-1442
-
Journal article (peer-reviewed)abstract
- Model intercomparison studies in the climate and Earth sciences communities have been crucial to building credibility and coherence for future projections. They have quantified variability among models, spurred model development, contrasted within- and among-model uncertainty, assessed model fits to historical data, and provided ensemble projections of future change under specified scenarios. Given the speed and magnitude of anthropogenic change in the marine environment and the consequent effects on food security, biodiversity, marine industries, and society, the time is ripe for similar comparisons among models of fisheries and marine ecosystems. Here, we describe the Fisheries and Marine Ecosystem Model Intercomparison Project protocol version 1.0 (Fish-MIP v1.0), part of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP), which is a cross-sectoral network of climate impact modellers. Given the complexity of the marine ecosystem, this class of models has substantial heterogeneity of purpose, scope, theoretical underpinning, processes considered, parameterizations, resolution (grain size), and spatial extent. This heterogeneity reflects the lack of a unified understanding of the marine ecosystem and implies that the assemblage of all models is more likely to include a greater number of relevant processes than any single model. The current Fish-MIP protocol is designed to allow these heterogeneous models to be forced with common Earth System Model (ESM) Coupled Model Intercomparison Project Phase 5 (CMIP5) outputs under prescribed scenarios for historic (from the 1950s) and future (to 2100) time periods; it will be adapted to CMIP phase 6 (CMIP6) in future iterations. It also describes a standardized set of outputs for each participating Fish-MIP model to produce. This enables the broad characterization of differences between and uncertainties within models and projections when assessing climate and fisheries impacts on marine ecosystems and the services they provide. The systematic generation, collation, and comparison of results from Fish-MIP will inform an understanding of the range of plausible changes in marine ecosystems and improve our capacity to define and convey the strengths and weaknesses of model-based advice on future states of marine ecosystems and fisheries. Ultimately, Fish-MIP represents a step towards bringing together the marine ecosystem modelling community to produce consistent ensemble medium- and long-term projections of marine ecosystems.
|
|
| 21. |
|
|
