1. |
- Aamodt, K., et al.
(author)
-
The ALICE experiment at the CERN LHC
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Research review (peer-reviewed)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
2. |
- Singh, B., et al.
(author)
-
Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0)
- 2017
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 95:3
-
Journal article (peer-reviewed)abstract
- The exclusive charmonium production process in (P) over barp annihilation with an associated pi 0 meson (p) over barp -> J/psi pi(0) is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the J/psi -> e(+) e(-) decay channel with the AntiProton ANnihilation at DArmstadt ((P) over bar ANDA) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the (P) over barp -> pi(+)pi(-)pi(0) and (p) over barp -> J/psi pi(0)pi(0) reactions are performed with PANDAROOT, the simulation and analysis software framework of the (P) over bar ANDA experiment. It is shown that the measurement can be done at (P) over bar ANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity.
|
|
3. |
- Singh, B., et al.
(author)
-
Study of doubly strange systems using stored antiprotons
- 2016
-
In: Nuclear Physics A. - : Elsevier. - 0375-9474 .- 1873-1554. ; 954, s. 323-340
-
Journal article (peer-reviewed)abstract
- Bound nuclear systems with two units of strangeness are still poorly known despite their importance for many strong interaction phenomena. Stored antiprotons beams in the GeV range represent an unparalleled factory for various hyperon-antihyperon pairs. Their outstanding large production probability in antiproton collisions will open the floodgates for a series of new studies of systems which contain two or even more units of strangeness at the PANDA experiment at FAIR. For the first time, high resolution gamma-spectroscopy of doubly strange Lambda Lambda-hypernuclei will be performed, thus complementing measurements of ground state decays of Lambda Lambda-hypernuclei at J-PARC or possible decays of particle unstable hypernuclei in heavy ion reactions. High resolution spectroscopy of multistrange Xi(-) -atoms will be feasible and even the production of Omega(-) -atoms will be within reach. The latter might open the door to the vertical bar S vertical bar = 3 world in strangeness nuclear physics, by the study of the hadronic Omega(-) -nucleus interaction. For the first time it will be possible to study the behavior of Xi(+) in nuclear systems under well controlled conditions.
|
|
4. |
- Collaboration, The PANDA, et al.
(author)
-
Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR
- 2016
-
In: European Physical Journal A. - : Springer Publishing Company. - 1434-6001 .- 1434-601X. ; 52:10
-
Journal article (peer-reviewed)abstract
- Simulation results for future measurements of electromagnetic proton form factors at P ¯ ANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel p¯ p→ e+e- is studied on the basis of two different but consistent procedures. The suppression of the main background channel, i.e.p¯ p→ π+π-, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. However, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance.
|
|
5. |
|
|
6. |
- Amoroso, A., et al.
(author)
-
The CGEM-IT readout chain
- 2021
-
In: Journal of Instrumentation. - : Institute of Physics Publishing (IOPP). - 1748-0221. ; 16:8
-
Journal article (peer-reviewed)abstract
- An innovative Cylindrical Gas Electron Multiplier (CGEM) detector is under construction for the upgrade of the inner tracker of the BESIII experiment. A novel system has been worked out for the readout of the CGEM detector, including a new ASIC, dubbed TIGER -Torino Integrated GEM Electronics for Readout, designed for the amplification and digitization of the CGEM output signals. The data output by TIGER are collected and processed by a first FPGA-based module, GEM Read Out Card, in charge of configuration and control of the front-end ASICs. A second FPGA-based module, named GEM Data Concentrator, builds the trigger selected event packets containing the data and stores them via the main BESIII data acquisition system. The design of the electronics chain, including the power and signal distribution, will be presented together with its performance.
|
|
7. |
- Carninci, P, et al.
(author)
-
The transcriptional landscape of the mammalian genome
- 2005
-
In: Science (New York, N.Y.). - : American Association for the Advancement of Science (AAAS). - 1095-9203 .- 0036-8075. ; 309:5740, s. 1559-1563
-
Journal article (peer-reviewed)abstract
- This study describes comprehensive polling of transcription start and termination sites and analysis of previously unidentified full-length complementary DNAs derived from the mouse genome. We identify the 5′ and 3′ boundaries of 181,047 transcripts with extensive variation in transcripts arising from alternative promoter usage, splicing, and polyadenylation. There are 16,247 new mouse protein-coding transcripts, including 5154 encoding previously unidentified proteins. Genomic mapping of the transcriptome reveals transcriptional forests, with overlapping transcription on both strands, separated by deserts in which few transcripts are observed. The data provide a comprehensive platform for the comparative analysis of mammalian transcriptional regulation in differentiation and development.
|
|
8. |
- Bisconti, F, et al.
(author)
-
Mini-EUSO engineering model : Tests in open-sky condition
- 2019
-
In: 36th International Cosmic Ray Conference, ICRC 2019. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- Mini-EUSO is a UV telescope that will look downwards to the Earth’s atmosphere onboard the International Space Station. With the design of the ultra-high energy cosmic ray fluorescence detectors belonging to the JEM-EUSO program, it will make the first UV map of the Earth by observing atmospheric phenomena such as transient luminous events, sprites and lightning, as well as meteors and bioluminescence from earth. Diffused light from laser shots from the ground, which mimic the fluorescence light emitted by Nitrogen molecules when extensive air showers pass through the atmosphere, can be used to verify the capability of this kind of detector to observe ultra-high energy cosmic rays. To validate the electronics and the trigger algorithms developed for Mini-EUSO, a scaled down version of the telescope with 1:9 of the original focal surface and a lens of 2.5 cm diameter has been built. Tests of the Mini-EUSO engineering model have been made in laboratory and in open sky condition. In this paper, we report results of observations of the night sky, which include the detection of stars, meteors, a planet and a rocket body reflecting the sunlight. Interesting results of the observation of city lights are also reported.
|
|
9. |
- Casolino, M, et al.
(author)
-
Mini-EUSO experiment to study UV emission of terrestrial and astrophysical origin onboard of the International Space Station
- 2019
-
In: 36th International Cosmic Ray Conference, ICRC 2019. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- Mini-EUSO will observe the Earth in the UV range (300 - 400 nm) offering the opportunity to study a variety of atmospheric events such as Transient Luminous Events (TLEs), meteors and marine bioluminescence. Furthermore it aims to search for Ultra High Energy Cosmic Rays (UHECR) above 1021 eV and Strange Quark Matter (SQM). The detector is expected to be launched to the International Space Station in August 2019 and look at the Earth in nadir mode from the UV-transparent window of the Zvezda module of the International Space Station. The instrument comprises a compact telescope with a large field of view (44?), based on an optical system employing two Fresnel lenses for light collection. The light is focused onto an array of 36 multi-anode photomultiplier tubes (MAPMT), for a total of 2304 pixels and the resulting signal is converted into digital, processed and stored via the electronics subsystems on-board. In addition to the main detector, Mini-EUSO contains two ancillary cameras[4] for complementary measurements in the near infrared (1500 - 1600 nm) and visible (400 - 780 nm) range and also a 8 × 8 SiPM imaging array.
|
|
10. |
- Miyamoto, H, et al.
(author)
-
Space debris detection and tracking with the techniques of cosmic ray physics
- 2019
-
In: 36th International Cosmic Ray Conference, ICRC 2019. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- Space Debris (SD) consist of non-operational artificial objects orbiting around the Earth, which could possibly damage space vehicles, such as the International Space Station (ISS) or other manned spacecrafts. The vast majority of such objects are cm-sized, not catalogued and usually the tracking data are not precise enough. Here we present the feasibility study of SD detection and tracking with techniques usually employed in cosmic-ray physics. For this purpose, we have evaluated the possibility of using Mini-EUSO, a space-borne fluorescence telescope to be deployed on the ISS, to track SD illuminated by the Sun. By means of ESAF (EUSO Simulation and analysis Framework) simulation and by developing the trigger algorithms, we estimated the minimum size and maximum distances of detectable SD. We then studied the number of possible SD detections using an ESA software called MASTER (Meteoroid and SD Terrestrial Environment Reference). With the Mini-EUSO Engineering Model (Mini-EUSO EM), we performed some measurements to estimate the reflectance of the most common SD materials and to demonstrate the ability of Mini-EUSO to detect SD events. We also performed some tests in open-sky conditions, identifying and tracking fast-moving objects. In particular, the detection of a rocket body allowed us to confirm the simulation outcomes predictions and the expected performance of the detector.
|
|
11. |
- Miyamoto, H., et al.
(author)
-
The Euso@turlab : Test of mini-EUSO engineering model
- 2019
-
In: Proceedings of Science. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- The TurLab facility is a laboratory, equipped with a 5 m diameter and 1 m depth rotating tank, located in the Physics Department of the University of Turin. Originally, it was mainly built to study systems of different scales where rotation plays a key role in the fluid behavior such as in atmospheric and oceanic flows. In the past few years the TurLab facility has been used to perform experiments related to the observation of Extreme Energy Cosmic Rays (EECRs) from space using the fluorescence technique. For example, in the case of the JEM-EUSO mission, where the diffuse night brightness and artificial light sources can vary significantly in time and space inside the Field of View of the telescope. The Focal Surface of Mini-EUSO Engineering Model (Mini-EUSO EM) with the level 1 (L1) and 2 (L2) trigger logics implemented in the Photo-Detector Module (PDM) has been tested at TurLab. Tests related to the possibility of using an EUSO-like detector for other type of applications such as Space Debris (SD) monitoring and imaging detector have also been pursued. The tests and results obtained within the EUSO@TurLab Project on these different topics are presented.
|
|
12. |
- Rolo, M. Da Rocha, et al.
(author)
-
A custom readout electronics for the BESIII CGEM detector
- 2017
-
In: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 12
-
Journal article (peer-reviewed)abstract
- For the upgrade of the inner tracker of the BESIII spectrometer, planned for 2018, a lightweight tracker based on an innovative Cylindrical Gas Electron Multiplier (CGEM) detector is now under development. The analogue readout of the CGEM enables the use of a charge centroid algorithm to improve the spatial resolution to better than 130 mu m while loosening the pitch strip to 650 mu m, which allows to reduce the total number of channels to about 10 000. The channels are readout by 160 dedicated integrated 64-channel front-end ASICs, providing a time and charge measurement and featuring a fully-digital output. The energy measurement is extracted either from the time-over-threshold (ToT) or the 10-bit digitisation of the peak amplitude of the signal. The time of the event is generated by quad-buffered low-power TDCs, allowing for rates in excess of 60 kHz per channel. The TDCs are based on analogue interpolation techniques and produce a time stamp (or two, if working in ToT mode) of the event with a time resolution better than 50 ps. The front-end noise, based on a CSA and a two-stage complex conjugated pole shapers, dominate the channel intrinsic time jitter, which is less than 5 ns r.m.s. The time information of the hit can be used to reconstruct the track path, operating the detector as a small TPC and hence improving the position resolution when the distribution of the cloud, due to large incident angle or magnetic field, is very broad. Event data is collected by an off-detector motherboard, where each GEM-ROC readout card handles 4 ASIC carrier FEBs (512 channels). Configuration upload and data readout between the off-detector electronics and the VME-based data collector cards are managed by bi-directional fibre optical links. This paper covers the design of a custom front-end electronics for the readout of the new inner tracker of the BESIII experiment, addressing the relevant design aspects of the detector electronics and the front-end ASIC for the CGEM readout, and reviewing the first silicon results of the chip prototype.
|
|
13. |
- Bisconti, F., et al.
(author)
-
Pre-flight qualification tests of the Mini-EUSO telescope engineering model
- 2022
-
In: Experimental astronomy. - : Springer Nature. - 0922-6435 .- 1572-9508. ; 53:1, s. 133-158
-
Journal article (peer-reviewed)abstract
- Mini-EUSO is part of the JEM-EUSO program and operates on board the International Space Station (ISS). It is a UV-telescope with single-photon counting capability looking at nighttime downwards to the Earth through a nadir-facing UV-transparent window. As part of the pre-flight tests, the Mini-EUSO engineering model, a telescope with 1/9 of the original focal surface and a lens of 2.5 cm diameter, has been built and tested. Tests of the Mini-EUSO engineering model have been made in laboratory and in open-sky conditions. Laboratory tests have been performed at the TurLab facility, located at the Physics Department of the University of Turin, equipped with a rotating tank containing different types of materials and light sources. In this way, the configuration for the observation of the Earth from space was emulated, including the Mini-EUSO trigger schemes. In addition to the qualification and calibration tests, the Mini-EUSO engineering model has also been used to evaluate the possibility of using a JEM-EUSO-type detector for applications such as observation of space debris. Furthermore, observations in open-sky conditions allowed the studies of natural light sources such as stars, meteors, planets, and artificial light sources such as airplanes, satellites reflecting the sunlight, and city lights. Most of these targets could be detected also with Mini-EUSO. In this paper, the tests in laboratory and in open-sky conditions are reported, as well as the obtained results. In addition, the contribution that such tests provided to foresee and improve the performance of Mini-EUSO on board the ISS is discussed.
|
|
14. |
- Barrillon, P., et al.
(author)
-
The EUSO@TurLab project in the framework of the JEM-EUSO program
- 2023
-
In: Experimental astronomy. - : Springer Nature. - 0922-6435 .- 1572-9508. ; 55:2, s. 569-602
-
Journal article (peer-reviewed)abstract
- The EUSO@TurLab project aims at performing experiments to reproduce Earth UV emissions as seen from a low Earth orbit by the planned missions of the JEM-EUSO program. It makes use of the TurLab facility, which is a laboratory, equipped with a 5 m diameter and 1 m depth rotating tank, located at the Physics Department of the University of Turin. All the experiments are designed and performed based on simulations of the expected response of the detectors to be flown in space. In April 2016 the TUS detector and more recently in October 2019 the Mini-EUSO experiment, both part of the JEM-EUSO program, have been placed in orbit to map the UV Earth emissions. It is, therefore, now possible to compare the replicas performed at TurLab with the actual images detected in space to understand the level of fidelity in terms of reproduction of the expected signals. We show that the laboratory tests reproduce at the order of magnitude level the measurements from space in terms of spatial extension and time duration of the emitted UV light, as well as the intensity in terms of expected counts per pixel per unit time when atmospheric transient events, diffuse nightlow background light, and artificial light sources are considered. Therefore, TurLab is found to be a very useful facility for testing the acquisition logic of the detectors of the present and future missions of the JEM-EUSO program and beyond in order to reproduce atmospheric signals in the laboratory.
|
|
15. |
- Battisti, M, et al.
(author)
-
Trigger developments for the fluorescence detector of EUSO-TA and EUSO-SPB2
- 2019
-
In: 36th International Cosmic Ray Conference, ICRC 2019.
-
Conference paper (peer-reviewed)abstract
- The JEM-EUSO program aims at detecting Ultra High Energy Cosmic Rays (UHECRs) by observing the fluorescence light produced by extensive air showers (EAS) in the Earth’s atmosphere. Within this program, a new generation of missions is being built, including (i) Mini-EUSO that will be installed on board the ISS in August 2019, (ii) an upgrade to the ground-based telescope EUSO-TA and (iii) the second super pressure balloon flight (EUSO-SPB2). All these detectors will have a dedicated trigger system based on a board equipped with a Xilinx Zynq device that will be able to detect different types of events on three different time-scales: a microsecond timescale for cosmic ray detection (L1), a hundreds of microsecond time-scale for slower events like transient luminous events (TLEs) (L2), and a tens of millisecond time-scale used to produce a continuous monitoring, for even slower events like meteors or nuclearites. The L1 trigger logic for the upgrade of EUSO-TA and EUSO-SPB2 are being developed taking into account the peculiarity of each detector (optic system, FOV, frame length) starting from the logic already developed for Mini-EUSO. In particular, every pixel will have an independent threshold that will be dynamically adapted to the level of the background; a predetermined condition on the number, the position and the time distribution of pixels above threshold has to be satisfied in order to issue a trigger. This contribution will summarize the L1 trigger logics and the tests currently performed.
|
|
16. |
- Belov, A., et al.
(author)
-
Mini-EUSO photodetector module data processing system
- 2017
-
In: Proceedings of Science. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- Mini-EUSO is a UV telescope which is developed by the JEM-EUSO collaboration to be placed on board the International Space Station (ISS) to carry out measurements of UV atmosphere airglow and transient luminous events (TLEs) in a wide field of view (>40°) and high temporal resolution (2.5 μs). Mini-EUSO is developed to be a space qualified pathfinder of future JEMEUSO missions. Optical system of the detector consists of two Fresnel lenses of 25 cm diameter. The focal surface is composed of 36 produced by Hamamatsu multi anode photomultiplier tubes (MAPMT), each with 64 pixels. The output signal of all 2304 pixels is digitized and then passed to the data processing system that was specially developed for the experiment and is being discussed in this work. Data processing system is based on produced by Xilinx ZYNQ chip that contains both programmable part (FPGA) and processor. Such combination in a single chip gives a big advantage for processing a data gathered from focal surface including fast multi-level trigger algorithms, data buffering, MAPMTs high voltage control algorithms, interfaces with front-end electronics and with the separate central processor unit for data storage. The multi-level trigger was developed for the mini-EUSO instrument to perform measurements in various time scales (temporal resolutions 2.5 μs, 320 μs, 40 ms). This trigger was successfully implemented and tested.
|
|
17. |
- Belov, A., et al.
(author)
-
The integration and testing of the Mini-EUSO multi-level trigger system
- 2017
-
In: Advances in Space Research. - : Elsevier. - 0273-1177.
-
Journal article (peer-reviewed)abstract
- The Mini-EUSO telescope is designed by the JEM-EUSO Collaboration to observe the UV emission of the Earth from the vantage point of the International Space Station (ISS) in low Earth orbit. The main goal of the mission is to map the Earth in the UV, thus increasing the technological readiness level of future EUSO experiments and to lay the groundwork for the detection of Extreme Energy Cosmic Rays (EECRs) from space (Ebisuzaki et al., 2014). Due to its high time resolution of 2.5 μs, Mini-EUSO is capable of detecting a wide range of UV phenomena in the Earth’s atmosphere. In order to maximise the scientific return of the mission, it is necessary to implement a multi-level trigger logic for data selection over different timescales. This logic is key to the success of the mission and thus must be thoroughly tested and carefully integrated into the data processing system prior to the launch. This article introduces the motivation behind the trigger design and details the integration and testing of the logic.
|
|
18. |
- Fausti, F., et al.
(author)
-
A multi-level triggering system for the Mini-EUSO UV telescope
- 2017
-
In: Proceedings of Science. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- As a pathfinder for the JEM-EUSO mission, Mini-EUSO is a 25cm diameter telescope which is going to be launched and positioned inside the International Space Station (ISS) in 2018. The main scientific goal of this mission is the achievement of a state-of-the-art UV map of the Earth from a 400 Km altitude, with ∼ 6 km of pixel spatial resolution, collecting data though a multi-level triggering system. The signal is collected with Multi-Anode Photo Multiplier Tubes (MAPMTs) and digitized by means of custom chips. The raw data moves then to a central system, the Zynq Board, where the trigger operates a data selection dividing different classes of events characterized by specific time scales. The acquired UV map will be used as discrimination threshold for the Extreme Energy Cosmic-Ray detection.
|
|
19. |
|
|
20. |
|
|