| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Ferrario, M., et al.
(author)
-
IRIDE : Interdisciplinary research infrastructure based on dual electron linacs and lasers
- 2014
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 740, s. 138-146
-
Journal article (peer-reviewed)abstract
- This paper describes the scientific aims and potentials as well as the preliminary technical design of RUDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity "particles factory", based on a combination of high duty cycle radio-frequency superconducting electron linacs and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. [RIDE is also supposed to be realized in subsequent stages of development depending on the assigned priorities.
|
|
| 10. |
- Ageron, M., et al.
(author)
-
ANTARES : The first undersea neutrino telescope
- 2011
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 656:1, s. 11-38
-
Journal article (peer-reviewed)abstract
- The ANTARES Neutrino Telescope was completed in May 2008 and is the first operational Neutrino Telescope in the Mediterranean Sea. The main purpose of the detector is to perform neutrino astronomy and the apparatus also offers facilities for marine and Earth sciences. This paper describes the design, the construction and the installation of the telescope in the deep sea, offshore from Toulon in France. An illustration of the detector performance is given. (C) 2011 Elsevier B.V. All rights reserved.
|
|
| 11. |
- Ageron, M., et al.
(author)
-
The ANTARES optical beacon system
- 2007
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 578:3, s. 498-509
-
Journal article (peer-reviewed)abstract
- ANTARES is a neutrino telescope being deployed in the Mediterranean Sea. It consists of a three-dimensional array of photomultiplier tubes that can detect the Cherenkov light induced by charged particles produced in the interactions of neutrinos with the surrounding medium. High angular resolution can be achieved, in particular, when a muon is produced, provided that the Cherenkov photons are detected with sufficient timing precision. Considerations of the intrinsic time uncertainties stemming from the transit time spread in the photomultiplier tubes and the mechanism of transmission of light in sea water lead to the conclusion that a relative time accuracy of the order of 0.5 ns is desirable. Accordingly, different time calibration systems have been developed for the ANTARES telescope. In this article, a system based on Optical Beacons, a set of external and well-controlled pulsed light sources located throughout the detector, is described. This calibration system takes into account the optical properties of sea water, which is used as the detection volume of the ANTARES telescope. The design, tests, construction and first results of the two types of beacons, LED and laser-based, are presented. (C) 2007 Elsevier B.V. All rights reserved.
|
|
| 12. |
- Ageron, M., et al.
(author)
-
Studies of a full-scale mechanical prototype line for the ANTARES neutrino telescope and tests of a prototype instrument for deep-sea acoustic measurements
- 2007
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 581:3, s. 695-708
-
Journal article (peer-reviewed)abstract
- full-scale mechanical prototype line was deployed to a depth of 2500 m to test the leak tightness of the electronics containers and the pressure-resistant properties of an electromechanical cable under evaluation for use in the ANTARES deep-sea neutrino telescope. During a month-long immersion study, line parameter data were taken using miniature autonomous data loggers and shore-based optical time domain reflectometry. Details of the mechanical prototype line, the electromechanical cable and data acquisition are presented. Data taken during the immersion study revealed deficiencies in the pressure resistance of the electromechanical cable terminations at the entry points to the electronics containers. The improvements to the termination, which have been integrated into subsequent detection lines, are discussed. The line also allowed deep-sea acoustic measurements with a prototype hydrophone system. The technical setup of this system is described, and the first results of the data analysis are presented. (c) 2007 Elsevier B.V. All rights reserved.
|
|
| 13. |
- Aguilar, J. A., et al.
(author)
-
First results of the instrumentation line for the deep-sea ANTARES neutrino telescope
- 2006
-
In: Astroparticle physics. - : Elsevier. - 0927-6505 .- 1873-2852. ; 26:4-5, s. 314-324
-
Journal article (peer-reviewed)abstract
- In 2005, the ANTARES Collaboration deployed and operated at a depth of 2500 m a so-called Mini Instrumentation Line equipped with Optical Modules (MILOM) at the ANTARES site. The various data acquired during the continuous operation from April to December 2005 of the MILOM confirm the satisfactory performance of the Optical Modules, their front-end electronics and readout system. as well as the calibration devices of the detector. The in situ measurement of the Optical Module time response yields a resolution better than 0.5 ns. The performance of the acoustic positioning system, which enables the spatial reconstruction of the ANTARES detector with a precision of about 10 cm, is verified. These results demonstrate that with the full ANTARES neutrino telescope the design angular resolution of better than 0.3 degrees can be realistically achieved.
|
|
| 14. |
- Aguilar, J. A., et al.
(author)
-
The data acquisition system for the ANTARES neutrino telescope
- 2007
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 570:1, s. 107-116
-
Journal article (peer-reviewed)abstract
- The ANTARES neutrino telescope is being constructed in the Mediterranean Sea. It consists of a large three-dimensional array of photo-multiplier tubes. The data acquisition system of the detector takes care of the digitisation of the photo-multiplier tube signals, data transport, data filtering, and data storage. The detector is operated using a control program interfaced with all elements. The design and the implementation of the data acquisition system are described. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 15. |
- Aguilar, J A, et al.
(author)
-
Study of large hemispherical photomultiplier tubes for the ANTARES neutrino telescope
- 2005
-
In: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 555:1-2, s. 132-141
-
Journal article (peer-reviewed)abstract
- The ANTARES neutrino telescope, to be immersed depth in the Mediterranean Sea, will consist of a three-dimensional matrix of 900 large area photomultiplier tubes housed in pressure-resistant glass spheres. The selection of the optimal photomultiplier was a critical step for the project and required an intensive phase of tests and developments carried out in close collaboration with the main manufacturers worldwide. This paper provides an overview of the tests performed by the collaboration and describes in detail the features of the photomultiplier tube chosen for ANTARES. (c) 2005 Elsevier B.V. All rights reserved.
|
|
| 16. |
- Raccosta, L, et al.
(author)
-
The oxysterol-CXCR2 axis plays a key role in the recruitment of tumor-promoting neutrophils
- 2013
-
In: The Journal of experimental medicine. - : Rockefeller University Press. - 1540-9538 .- 0022-1007. ; 210:9, s. 1711-1728
-
Journal article (peer-reviewed)abstract
- Tumor-infiltrating immune cells can be conditioned by molecules released within the microenvironment to thwart antitumor immune responses, thereby facilitating tumor growth. Among immune cells, neutrophils play an important protumorigenic role by favoring neoangiogenesis and/or by suppressing antitumor immune responses. Tumor-derived oxysterols have recently been shown to favor tumor growth by inhibiting dendritic cell migration toward lymphoid organs. We report that tumor-derived oxysterols recruit protumor neutrophils in a liver X receptor (LXR)–independent, CXCR2-dependent manner, thus favoring tumor growth by promoting neoangiogenesis and immunosuppression. We demonstrate that interfering with the oxysterol–CXCR2 axis delays tumor growth and prolongs the overall survival of tumor-bearing mice. These results identify an unanticipated protumor function of the oxysterol–CXCR2 axis and a possible target for cancer therapy.
|
|
| 17. |
|
|
| 18. |
- Biancari, F, et al.
(author)
-
Preoperative risk stratification of deep sternal wound infection after coronary surgery
- 2020
-
In: Infection control and hospital epidemiology. - : Cambridge University Press (CUP). - 1559-6834 .- 0899-823X. ; 41:4, s. 444-451
-
Journal article (peer-reviewed)abstract
- Objective:To develop a risk score for deep sternal wound infection (DSWI) after isolated coronary artery bypass grafting (CABG).Design:Multicenter, prospective study.Setting:Tertiary-care referral hospitals.Participants:The study included 7,352 patients from the European multicenter coronary artery bypass grafting (E-CABG) registry.Intervention:Isolated CABG.Methods:An additive risk score (the E-CABG DSWI score) was estimated from the derivation data set (66.7% of patients), and its performance was assessed in the validation data set (33.3% of patients).Results:DSWI occurred in 181 (2.5%) patients and increased 1-year mortality (adjusted hazard ratio, 4.275; 95% confidence interval [CI], 2.804–6.517). Female gender (odds ratio [OR], 1.804; 95% CI, 1.161–2.802), body mass index ≥30 kg/m2(OR, 1.729; 95% CI, 1.166–2.562), glomerular filtration rate <45 mL/min/1.73 m2(OR, 2.410; 95% CI, 1.413–4.111), diabetes (OR, 1.741; 95% CI, 1.178–2.573), pulmonary disease (OR, 1.935; 95% CI, 1.178–3.180), atrial fibrillation (OR, 1.854; 95% CI, 1.096–3.138), critical preoperative state (OR, 2.196; 95% CI, 1.209–3.891), and bilateral internal mammary artery grafting (OR, 2.088; 95% CI, 1.422–3.066) were predictors of DSWI (derivation data set). An additive risk score was calculated by assigning 1 point to each of these independent risk factors for DSWI. In the validation data set, the rate of DSWI increased along with the E-CABG DSWI scores (score of 0, 1.0%; score of 1, 1.8%; score of 2, 2.2%; score of 3, 6.9%; score ≥4: 12.1%;P< .0001). Net reclassification improvement, integrated discrimination improvement, and decision curve analysis showed that the E-CABG DSWI score performed better than other risk scores.Conclusions:DSWI is associated with poor outcome after CABG, and its risk can be stratified using the E-CABG DSWI score.Trial registration:clinicaltrials.gov identifier: NCT02319083
|
|
| 19. |
|
|
| 20. |
- Torrisi, Lorenzo, et al.
(author)
-
High intensity laser-generating plasmas in forward direction in thin films and Thomson parabola spectrometer monitorage
- 2010
-
Reports (other academic/artistic)abstract
- Asterix laser at PALS Laboratory of Prague, operating at 1315 nm fundamental wavelength, 300 ps pulse duration, 1016 W/cm2 intensity and single pulse mode, was employed to irradiate thin hydrogenated targets placed in high vacuum. Non-equilibrium plasmas were obtained in forward direction, i.e. along the normal to the target surface on the rear of the irradiated thin films. Plasmas were monitored with different ion detectors, placed around the direction normal to the target. The main detector was a Thomson parabola spectrometer aligned along the normal in forward direction. This spectrometer permits to provide many plasma parameters concerning the involved ions (energy, charge state, mass,...) obtained in a single laser shot. The spectrometer images, obtained by using a MCP coupled to a fast CCD camera, can be processed by a comparison with the simulation data obtained by a proper software. High ion energies and charge states have been obtained as a function of the laser parameters, target thickness and composition and irradiation conditions.
|
|
| 21. |
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
|
|
| 29. |
|
|
| 30. |
|
|
| 31. |
|
|
| 32. |
|
|
| 33. |
|
|
| 34. |
|
|
| 35. |
- Kroon, Renee, 1982, et al.
(author)
-
Comparison of selenophene and thienothiophene incorporation into pentacyclic lactam-based conjugated polymers for organic solar cells
- 2015
-
In: Polymer Chemistry. - : Royal Society of Chemistry (RSC). - 1759-9954 .- 1759-9962. ; 6:42, s. 7402-7409
-
Journal article (peer-reviewed)abstract
- In this work, we compare the effect of incorporating selenophene versus thienothiophene spacers into pentacyclic lactam-based conjugated polymers for organic solar cells. The two cyclic lactam-based copolymers were obtained via a new synthetic method for the lactam moiety. Selenophene incorporation results in a broader and red-shifted optical absorption while retaining a deep highest occupied molecular orbital level, whereas thienothienophene incorporation results in a blue-shifted optical absorption. Additionally, grazing-incidence wide angle X-ray scattering data indicates edge- and face-on solid state order for the selenophene-based polymer as compared to the thienothiophene-based polymer, which orders predominantly edge-on with respect to the substrate. In polymer : PC71BM bulk heterojunction solar cells both materials show a similar open-circuit voltage of similar to 0.80-0.84 V, however the selenophene-based polymer displays a higher fill factor of similar to 0.70 vs. similar to 0.65. This is due to the partial face-on backbone orientation of the selenophene-based polymer, leading to a higher hole mobility, as confirmed by single-carrier diode measurements, and a concomitantly higher fill factor. Combined with improved spectral coverage of the selenophene-based polymer, as confirmed by quantum efficiency experiments, it offers a larger short-circuit current density of similar to 12 mA cm(-2). Despite the relatively low molecular weight of both materials, a very robust power conversion efficiency similar to 7% is achieved for the selenophene-based polymer, while the thienothiophene-based polymer demonstrates only a moderate maximum PCE of similar to 5.5%. Hence, the favorable effects of selenophene incorporation on the photovoltaic performance of pentacyclic lactam-based conjugated polymers are clearly demonstrated.
|
|
| 36. |
|
|
| 37. |
- Lutz, K, et al.
(author)
-
Ly6D+Siglec-H+ precursors contribute to conventional dendritic cells via a Zbtb46+Ly6D+ intermediary stage
- 2022
-
In: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1, s. 3456-
-
Journal article (peer-reviewed)abstract
- Plasmacytoid and conventional dendritic cells (pDC and cDC) are generated from progenitor cells in the bone marrow and commitment to pDCs or cDC subtypes may occur in earlier and later progenitor stages. Cells within the CD11c+MHCII−/loSiglec-H+CCR9lo DC precursor fraction of the mouse bone marrow generate both pDCs and cDCs. Here we investigate the heterogeneity and commitment of subsets in this compartment by single-cell transcriptomics and high-dimensional flow cytometry combined with cell fate analysis: Within the CD11c+MHCII−/loSiglec-H+CCR9lo DC precursor pool cells expressing high levels of Ly6D and lacking expression of transcription factor Zbtb46 contain CCR9loB220hi immediate pDC precursors and CCR9loB220lo (lo-lo) cells which still generate pDCs and cDCs in vitro and in vivo under steady state conditions. cDC-primed cells within the Ly6DhiZbtb46– lo-lo precursors rapidly upregulate Zbtb46 and pass through a Zbtb46+Ly6D+ intermediate stage before acquiring cDC phenotype after cell division. Type I IFN stimulation limits cDC and promotes pDC output from this precursor fraction by arresting cDC-primed cells in the Zbtb46+Ly6D+ stage preventing their expansion and differentiation into cDCs. Modulation of pDC versus cDC output from precursors by external factors may allow for adaptation of DC subset composition at later differentiation stages.
|
|
| 38. |
- Mas-Machuca, Carmen, et al.
(author)
-
Reliable Control and Data Planes for Softwarized Networks
- 2020
-
In: Guide to Disaster-Resilient Communication Networks. - : Springer. - 9783030446840 - 9783030446857 - 9783030446871 ; , s. 243-270
-
Book chapter (peer-reviewed)abstract
- Driven by the requirement of increasing performance and flexibility, networks are being softwarized by paradigms such as software-defined networking (SDN) and network function virtualization (NFV). These solutions reduce the complexity and the specialization of hardware devices, by extracting the inherently distributed control plane of forwarding network elements such as switches and routers, to a logically centralized control plane (referred as controller in SDN). The control plane acts as a broker between the network applications (e.g. monitoring, traffic engineering) and the data plane (i.e. physical network infrastructure). For scalability and robustness, the logically centralized control plane is implemented by physically distributing different controllers throughout the network. This chapter presents different solutions to increase the reliability of both planes: data and control planes. The reliability of the data plane can be increased by considering survivable virtual network embedding solutions. This chapter proposes a survivable embedding against single and double failures at either links or nodes. Furthermore, in order to provide a programmable and resilient data plane, BPFabric has been proposed for SDN which supports high performance functions suitable for detecting attacks. On the other hand, the reliability of the control plane applied to SDN can be addressed by considering enhanced controller placement solutions providing redundancy against uncorrelated as well as targeted failures while coping with latency and capacity requirements. Furthermore, a solution to increase the security and robustness of the control channel is also addressed in this chapter.
|
|
| 39. |
- Matos, Marina N., et al.
(author)
-
Metagenomics unveils the attributes of the alginolytic guilds of sediments from four distant cold coastal environments
- 2016
-
In: Environmental Microbiology. - : Wiley. - 1462-2912 .- 1462-2920. ; 18:12, s. 4471-4484
-
Journal article (peer-reviewed)abstract
- Alginates are abundant polysaccharides in brown algae that constitute an important energy source for marine heterotrophic bacteria. Despite the key role of alginate degradation processes in the marine carbon cycle, little information is available on the bacterial populations involved in these processes. The aim of this work was to gain a better understanding of alginate utilization capabilities in cold coastal environments. Sediment metagenomes from four high-latitude regions of both Hemispheres were interrogated for alginate lyase gene homologue sequences and their genomic context. Sediments contained highly abundant and diverse bacterial assemblages with alginolytic potential, including members of Bacteroidetes and Proteobacteria, as well as several poorly characterized taxa. The microbial communities in Arctic and Antarctic sediments exhibited the most similar alginolytic profiles, whereas brackish sediments showed distinct structures with a higher proportion of novel genes. Examination of the gene neighbourhood of the alginate lyase homologues revealed distinct patterns depending on the potential lineage of the scaffolds, with evidence of evolutionary relationships among alginolytic gene clusters from Bacteroidetes and Proteobacteria. This information is relevant for understanding carbon fluxes in cold coastal environments and provides valuable information for the development of biotechnological applications from brown algae biomass.
|
|
| 40. |
- Musumeci, Matías A, et al.
(author)
-
Prospecting Biotechnologically-Relevant Monooxygenases from Cold Sediment Metagenomes : An In Silico Approach
- 2017
-
In: Marine Drugs. - : MDPI. - 1660-3397. ; 15:4
-
Journal article (peer-reviewed)abstract
- The goal of this work was to identify sequences encoding monooxygenase biocatalysts with novel features by in silico mining an assembled metagenomic dataset of polar and subpolar marine sediments. The targeted enzyme sequences were Baeyer-Villiger and bacterial cytochrome P450 monooxygenases (CYP153). These enzymes have wide-ranging applications, from the synthesis of steroids, antibiotics, mycotoxins and pheromones to the synthesis of monomers for polymerization and anticancer precursors, due to their extraordinary enantio-, regio-, and chemo- selectivity that are valuable features for organic synthesis. Phylogenetic analyses were used to select the most divergent sequences affiliated to these enzyme families among the 264 putative monooxygenases recovered from the ~14 million protein-coding sequences in the assembled metagenome dataset. Three-dimensional structure modeling and docking analysis suggested features useful in biotechnological applications in five metagenomic sequences, such as wide substrate range, novel substrate specificity or regioselectivity. Further analysis revealed structural features associated with psychrophilic enzymes, such as broader substrate accessibility, larger catalytic pockets or low domain interactions, suggesting that they could be applied in biooxidations at room or low temperatures, saving costs inherent to energy consumption. This work allowed the identification of putative enzyme candidates with promising features from metagenomes, providing a suitable starting point for further developments.
|
|
| 41. |
|
|
| 42. |
|
|
| 43. |
- Yang, Chiyuan, et al.
(author)
-
A high-conductivity n-type polymeric ink for printed electronics
- 2021
-
In: Nature Communications. - : Nature Research. - 2041-1723. ; 12:1
-
Journal article (peer-reviewed)abstract
- Conducting polymers, such as the p-doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), have enabled the development of an array of opto- and bio-electronics devices. However, to make these technologies truly pervasive, stable and easily processable, n-doped conducting polymers are also needed. Despite major efforts, no n-type equivalents to the benchmark PEDOT:PSS exist to date. Here, we report on the development of poly(benzimidazobenzophenanthroline):poly(ethyleneimine) (BBL:PEI) as an ethanol-based n-type conductive ink. BBL:PEI thin films yield an n-type electrical conductivity reaching 8Scm(-1), along with excellent thermal, ambient, and solvent stability. This printable n-type mixed ion-electron conductor has several technological implications for realizing high-performance organic electronic devices, as demonstrated for organic thermoelectric generators with record high power output and n-type organic electrochemical transistors with a unique depletion mode of operation. BBL:PEI inks hold promise for the development of next-generation bioelectronics and wearable devices, in particular targeting novel functionality, efficiency, and power performance. The development of n-type conductive polymer inks is critical for the development of next-generation opto-electronic devices that rely on efficient hole and electron transport. Here, the authors report an alcohol-based, high performance and stable n-type conductive ink for printed electronics.
|
|
