1. |
- Ikuta, K. S., et al.
(author)
-
Global mortality associated with 33 bacterial pathogens in 2019: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
In: Lancet. - : Elsevier BV. - 0140-6736. ; 400:10369, s. 2221-2248
-
Journal article (peer-reviewed)abstract
- Background Reducing the burden of death due to infection is an urgent global public health priority. Previous studies have estimated the number of deaths associated with drug-resistant infections and sepsis and found that infections remain a leading cause of death globally. Understanding the global burden of common bacterial pathogens (both susceptible and resistant to antimicrobials) is essential to identify the greatest threats to public health. To our knowledge, this is the first study to present global comprehensive estimates of deaths associated with 33 bacterial pathogens across 11 major infectious syndromes. Methods We estimated deaths associated with 33 bacterial genera or species across 11 infectious syndromes in 2019 using methods from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019, in addition to a subset of the input data described in the Global Burden of Antimicrobial Resistance 2019 study. This study included 343 million individual records or isolates covering 11 361 study-location-years. We used three modelling steps to estimate the number of deaths associated with each pathogen: deaths in which infection had a role, the fraction of deaths due to infection that are attributable to a given infectious syndrome, and the fraction of deaths due to an infectious syndrome that are attributable to a given pathogen. Estimates were produced for all ages and for males and females across 204 countries and territories in 2019. 95% uncertainty intervals (UIs) were calculated for final estimates of deaths and infections associated with the 33 bacterial pathogens following standard GBD methods by taking the 2.5th and 97.5th percentiles across 1000 posterior draws for each quantity of interest. Findings From an estimated 13.7 million (95% UI 10.9-17.1) infection-related deaths in 2019, there were 7.7 million deaths (5.7-10.2) associated with the 33 bacterial pathogens (both resistant and susceptible to antimicrobials) across the 11 infectious syndromes estimated in this study. We estimated deaths associated with the 33 bacterial pathogens to comprise 13.6% (10.2-18.1) of all global deaths and 56.2% (52.1-60.1) of all sepsis-related deaths in 2019. Five leading pathogens-Staphylococcus aureus, Escherichia coli, Streptococcus pneumoniae, Klebsiella pneumoniae, and Pseudomonas aeruginosa-were responsible for 54.9% (52.9-56.9) of deaths among the investigated bacteria. The deadliest infectious syndromes and pathogens varied by location and age. The age-standardised mortality rate associated with these bacterial pathogens was highest in the sub-Saharan Africa super-region, with 230 deaths (185-285) per 100 000 population, and lowest in the high-income super-region, with 52.2 deaths (37.4-71.5) per 100 000 population. S aureus was the leading bacterial cause of death in 135 countries and was also associated with the most deaths in individuals older than 15 years, globally. Among children younger than 5 years, S pneumoniae was the pathogen associated with the most deaths. In 2019, more than 6 million deaths occurred as a result of three bacterial infectious syndromes, with lower respiratory infections and bloodstream infections each causing more than 2 million deaths and peritoneal and intra-abdominal infections causing more than 1 million deaths. Interpretation The 33 bacterial pathogens that we investigated in this study are a substantial source of health loss globally, with considerable variation in their distribution across infectious syndromes and locations. Compared with GBD Level 3 underlying causes of death, deaths associated with these bacteria would rank as the second leading cause of death globally in 2019; hence, they should be considered an urgent priority for intervention within the global health community. Strategies to address the burden of bacterial infections include infection prevention, optimised use of antibiotics, improved capacity for microbiological analysis, vaccine development, and improved and more pervasive use of available vaccines. These estimates can be used to help set priorities for vaccine need, demand, and development. Copyright (c) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
2. |
- Bryazka, D., et al.
(author)
-
Population-level risks of alcohol consumption by amount, geography, age, sex, and year: a systematic analysis for the Global Burden of Disease Study 2020
- 2022
-
In: Lancet. - 0140-6736. ; 400:10347, s. 185-235
-
Journal article (peer-reviewed)abstract
- Background The health risks associated with moderate alcohol consumption continue to be debated. Small amounts of alcohol might lower the risk of some health outcomes but increase the risk of others, suggesting that the overall risk depends, in part, on background disease rates, which vary by region, age, sex, and year. Methods For this analysis, we constructed burden-weighted dose-response relative risk curves across 22 health outcomes to estimate the theoretical minimum risk exposure level (TMREL) and non-drinker equivalence (NDE), the consumption level at which the health risk is equivalent to that of a non-drinker, using disease rates from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2020 for 21 regions, including 204 countries and territories, by 5-year age group, sex, and year for individuals aged 15-95 years and older from 1990 to 2020. Based on the NDE, we quantified the population consuming harmful amounts of alcohol. Findings The burden-weighted relative risk curves for alcohol use varied by region and age. Among individuals aged 15-39 years in 2020, the TMREL varied between 0 (95% uncertainty interval 0-0) and 0.603 (0.400-1.00) standard drinks per day, and the NDE varied between 0.002 (0-0) and 1.75 (0.698-4.30) standard drinks per day. Among individuals aged 40 years and older, the burden-weighted relative risk curve was J-shaped for all regions, with a 2020 TMREL that ranged from 0.114 (0-0.403) to 1.87 (0.500-3.30) standard drinks per day and an NDE that ranged between 0.193 (0-0.900) and 6.94 (3.40-8.30) standard drinks per day. Among individuals consuming harmful amounts of alcohol in 2020, 59.1% (54.3-65.4) were aged 15-39 years and 76.9% (7.0-81.3) were male. Interpretation There is strong evidence to support recommendations on alcohol consumption varying by age and location. Stronger interventions, particularly those tailored towards younger individuals, are needed to reduce the substantial global health loss attributable to alcohol. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd.
|
|
3. |
|
|
4. |
|
|
5. |
|
|
6. |
|
|
7. |
|
|
8. |
|
|
9. |
|
|
10. |
|
|
11. |
|
|
12. |
|
|
13. |
|
|
14. |
|
|
15. |
|
|
16. |
|
|
17. |
|
|
18. |
|
|
19. |
|
|
20. |
|
|
21. |
|
|
22. |
- Micah, Angela E., et al.
(author)
-
Tracking development assistance for health and for COVID-19 : a review of development assistance, government, out-of-pocket, and other private spending on health for 204 countries and territories, 1990-2050
- 2021
-
In: The Lancet. - : Elsevier. - 0140-6736 .- 1474-547X. ; 398:10308, s. 1317-1343
-
Research review (peer-reviewed)abstract
- Background The rapid spread of COVID-19 renewed the focus on how health systems across the globe are financed, especially during public health emergencies. Development assistance is an important source of health financing in many low-income countries, yet little is known about how much of this funding was disbursed for COVID-19. We aimed to put development assistance for health for COVID-19 in the context of broader trends in global health financing, and to estimate total health spending from 1995 to 2050 and development assistance for COVID-19 in 2020. Methods We estimated domestic health spending and development assistance for health to generate total health-sector spending estimates for 204 countries and territories. We leveraged data from the WHO Global Health Expenditure Database to produce estimates of domestic health spending. To generate estimates for development assistance for health, we relied on project-level disbursement data from the major international development agencies' online databases and annual financial statements and reports for information on income sources. To adjust our estimates for 2020 to include disbursements related to COVID-19, we extracted project data on commitments and disbursements from a broader set of databases (because not all of the data sources used to estimate the historical series extend to 2020), including the UN Office of Humanitarian Assistance Financial Tracking Service and the International Aid Transparency Initiative. We reported all the historic and future spending estimates in inflation-adjusted 2020 US$, 2020 US$ per capita, purchasing-power parity-adjusted US$ per capita, and as a proportion of gross domestic product. We used various models to generate future health spending to 2050. Findings In 2019, health spending globally reached $8. 8 trillion (95% uncertainty interval [UI] 8.7-8.8) or $1132 (1119-1143) per person. Spending on health varied within and across income groups and geographical regions. Of this total, $40.4 billion (0.5%, 95% UI 0.5-0.5) was development assistance for health provided to low-income and middle-income countries, which made up 24.6% (UI 24.0-25.1) of total spending in low-income countries. We estimate that $54.8 billion in development assistance for health was disbursed in 2020. Of this, $13.7 billion was targeted toward the COVID-19 health response. $12.3 billion was newly committed and $1.4 billion was repurposed from existing health projects. $3.1 billion (22.4%) of the funds focused on country-level coordination and $2.4 billion (17.9%) was for supply chain and logistics. Only $714.4 million (7.7%) of COVID-19 development assistance for health went to Latin America, despite this region reporting 34.3% of total recorded COVID-19 deaths in low-income or middle-income countries in 2020. Spending on health is expected to rise to $1519 (1448-1591) per person in 2050, although spending across countries is expected to remain varied. Interpretation Global health spending is expected to continue to grow, but remain unequally distributed between countries. We estimate that development organisations substantially increased the amount of development assistance for health provided in 2020. Continued efforts are needed to raise sufficient resources to mitigate the pandemic for the most vulnerable, and to help curtail the pandemic for all. Copyright (C) 2021 The Author(s). Published by Elsevier Ltd.
|
|
23. |
|
|
24. |
- Jadhav, S, et al.
(author)
-
Studies on colloidal stability of PVP-coated LSMO nanoparticles for magnetic fluid hyperthermia
- 2013
-
In: New Journal of Chemistry. - : Royal Society of Chemistry. - 1144-0546 .- 1369-9261. ; 37, s. 3121-3130
-
Journal article (peer-reviewed)abstract
- La0.7Sr0.3MnO3 (LSMO) nanoparticles with a size of ∼23 nm have been prepared by a combustion method and functionalized with polyvinylpyrrolidone (PVP) for their possible application in magnetic fluid hyperthermia (MFH). Uncoated and PVP-coated samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy and vibrating sample magnetometer studies. Magnetic measurements of both coated and uncoated particles reveal the superparamagnetic nature at room temperature. Colloidal stability has been measured in terms of zeta potential. The resulting PVP-coated particles form a stable suspension in phosphate buffer saline (PBS) and double distilled water (DDW) and possess a narrow hydrodynamic size distribution. The induction heating studies of these nanoparticles at different alternating magnetic fields (167.6, 251.4 and 335.2 Oe) were carried out by dispersing nanoparticles in DDW and PBS. These PVP-coated LSMO NPs exhibit a higher specific absorption rate in PBS than in DDW. The results suggest that combustion-synthesized LSMO nanoparticles coated with PVP can be used as potential heating agents in MFH.
|
|
25. |
|
|
26. |
- Mohan Pawar, Prashant, et al.
(author)
-
In muro deacetylation of xylan affects lignin properties and improves saccharification of aspen wood
- 2017
-
In: Biotechnology for Biofuels. - : Springer Science and Business Media LLC. - 1754-6834 .- 1754-6834. ; 10:1, s. Art nr 98-
-
Journal article (peer-reviewed)abstract
- Background: Lignocellulose from fast growing hardwood species is a preferred source of polysaccharides for advanced biofuels and "green" chemicals. However, the extensive acetylation of hardwood xylan hinders lignocellulose saccharification by obstructing enzymatic xylan hydrolysis and causing inhibitory acetic acid concentrations during microbial sugar fermentation. To optimize lignocellulose for cost-effective saccharification and biofuel production, an acetyl xylan esterase AnAXE1 from Aspergillus niger was introduced into aspen and targeted to cell walls. Results: AnAXE1-expressing plants exhibited reduced xylan acetylation and grew normally. Without pretreatment, their lignocellulose yielded over 25% more glucose per unit mass of wood (dry weight) than wild-type plants. Glucose yields were less improved (+7%) after acid pretreatment, which hydrolyses xylan. The results indicate that AnAXE1 expression also reduced the molecular weight of xylan, and xylan-lignin complexes and/or lignin co-extracted with xylan, increased cellulose crystallinity, altered the lignin composition, reducing its syringyl to guaiacyl ratio, and increased lignin solubility in dioxane and hot water. Lignin-associated carbohydrates became enriched in xylose residues, indicating a higher content of xylo-oligosaccharides. Conclusions: This work revealed several changes in plant cell walls caused by deacetylation of xylan. We propose that deacetylated xylan is partially hydrolyzed in the cell walls, liberating xylo-oligosaccharides and their associated lignin oligomers from the cell wall network. Deacetylating xylan thus not only increases its susceptibility to hydrolytic enzymes during saccharification but also changes the cell wall architecture, increasing the extractability of lignin and xylan and facilitating saccharification.
|
|
27. |
- Nikam, Dipali, et al.
(author)
-
Study of AC Magnetic Heating Characteristics of Co0.5Zn0.5Fe2O4 nanoparticles for magnetic Hyperthermia therapy
- 2014
-
In: Journal of Magnetism and Magnetic Materials. - : Elsevier. - 0304-8853 .- 1873-4766. ; 349, s. 208-213
-
Journal article (peer-reviewed)abstract
- Structural, magnetic properties and an alternating current (AC) magnetic heating characteristics of Co0.5Zn0.5Fe2O4 nanoparticles (CZF NPs) have been investigated with respect to the possible application for magnetic hyperthermia treatments. The Specific Absorption Rate (SAR) was measured in alternating magnetic fields of 167.5–335.2 Oe at fixed frequency of 265 kHz. CZF NPs were fabricated by the chemical co-precipitation method using sodium hydroxide (NaOH) as the precipitating agent. The morphology of the particles was analysed by Transmission Electron microscopy (TEM). The TEM reveals that the grains are nearly spherical in shape with average particles size of 19 nm. X-ray diffraction pattern indicated the sole existence of cubic spinel phase of CZF NPs. The magnetization (Ms) of CZF NPs was measured at room temperature (300 K) using a Vibrating Sample Magnetometer (VSM). The magnetic heating ability of NPs was studied with an induction heating system. A highest SAR value of 114.98 W/g for 5 mg/mL sample concentration (265 kHz, 335.2 Oe) was determined
|
|
28. |
- Thorat, N, et al.
(author)
-
Structured superparamagnetic nanoparticles for high performance mediator of magnetic fluid hyperthermia: synthesis, colloidal stability and biocompatibility evaluation
- 2014
-
In: Materials science & engineering. C, biomimetic materials, sensors and systems. - : Elsevier BV. - 0928-4931 .- 1873-0191. ; 42, s. 637-646
-
Journal article (peer-reviewed)abstract
- Core–shell structures with magnetic core and metal/polymer shell provide a new opportunity for constructing highly efficient mediator for magnetic fluid hyperthermia. Herein, a facile method is described for the synthesis of superparamagnetic LSMO@Pluronic F127 core–shell nanoparticles. Initially, the surface of the LSMO nanoparticles is functionalized with oleic acid and the polymeric shell formation is achieved through hydrophobic interactions with oleic acid. Each step is optimized to get good dispersion and less aggregation. This methodology results into core–shell formation, of average diameter less than 40 nm, which was stable under physiological conditions. After making a core–shell formulation, a significant increase of specific absorption rate (up to 300%) has been achieved with variation of the magnetization (< 20%). Furthermore, this high heating capacity can be maintained in various simulated physiological conditions. The observed specific absorption rate is almost higher than Fe3O4. MTT assay is used to evaluate the toxicity of bare and core–shell MNPs. The mechanism of cell death by necrosis and apoptosis is studied with sequential staining of acridine orange and ethidium bromide using fluorescence and confocal microscopy. The present work reports a facile method for the synthesis of core–shell structure which significantly improves SAR and biocompatibility of bare LSMO MNPs, indicating potential application for hyperthermia.
|
|
29. |
- Bentley, Blair P., et al.
(author)
-
Divergent sensory and immune gene evolution in sea turtles with contrasting demographic and life histories
- 2023
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences (PNAS). - 0027-8424 .- 1091-6490. ; 120:7
-
Journal article (peer-reviewed)abstract
- Sea turtles represent an ancient lineage of marine vertebrates that evolved from terrestrial ancestors over 100 Mya. The genomic basis of the unique physiological and ecological traits enabling these species to thrive in diverse marine habitats remains largely unknown. Additionally, many populations have drastically declined due to anthropogenic activities over the past two centuries, and their recovery is a high global conservation priority. We generated and analyzed high-quality reference genomes for the leatherback (Dermochelys coriacea) and green (Chelonia mydas) turtles, representing the two extant sea turtle families. These genomes are highly syntenic and homologous, but localized regions of noncollinearity were associated with higher copy numbers of immune, zinc-finger, and olfactory receptor (OR) genes in green turtles, with ORs related to waterborne odorants greatly expanded in green turtles. Our findings suggest that divergent evolution of these key gene families may underlie immunological and sensory adaptations assisting navigation, occupancy of neritic versus pelagic environments, and diet specialization. Reduced collinearity was especially prevalent in microchromosomes, with greater gene content, heterozygosity, and genetic distances between species, supporting their critical role in vertebrate evolutionary adaptation. Finally, diversity and demographic histories starkly contrasted between species, indicating that leatherback turtles have had a low yet stable effective population size, exhibit extremely low diversity compared with other reptiles, and harbor a higher genetic load compared with green turtles, reinforcing concern over their persistence under future climate scenarios. These genomes provide invaluable resources for advancing our understanding of evolution and conservation best practices in an imperiled vertebrate lineage.
|
|
30. |
|
|
31. |
|
|
32. |
|
|
33. |
|
|
34. |
- Honarparvar, Bahareh, et al.
(author)
-
Pentacycloundecane-diol-Based HIV-1 Protease Inhibitors : Biological Screening, 2D NMR, and Molecular Simulation Studies
- 2012
-
In: ChemMedChem. - : Wiley. - 1860-7179 .- 1860-7187. ; 7:6, s. 1009-1019
-
Journal article (peer-reviewed)abstract
- Novel compounds incorporating a pentacycloundecane (PCU) diol moiety were designed, synthesized, and evaluated as inhibitors of the wild-type C-South African (C-SA) HIV-1 protease. Seven compounds are reported herein, three of which displayed IC50 values in the 0.50.6 mu M range. The cytotoxicity of PCU cage peptides toward human MT-4 cells appears to be several orders of magnitude less toxic than the current antiviral medications ritonavir and lopinavir. NMR studies based on the observed through-space 1H,1H distances/contacts in the EASY-ROESY spectra of three of the considered PCU peptide inhibitors enabled us to describe their secondary solution structure. Conserved hydrogen bonding interactions were observed between the hydroxy group of the PCU diol inhibitors and the catalytic triad (Asp25, Ile26, Gly27) of HIV protease in docking and molecular dynamics simulations. The biological significance and possible mode of inhibition by PCU-based HIV protease inhibitors discussed herein facilitates a deeper understanding of this family of inhibitors and their potential application to a vast number of alternative diseases related to proteases.
|
|
35. |
- Khot, V, et al.
(author)
-
Formation, microstructure and magnetic properties of nanocrystalline MgFe2O4
- 2012
-
In: Materials Chemistry and Physics. - : Elsevier. - 0254-0584 .- 1879-3312. ; 132:2-3, s. 782-787
-
Journal article (peer-reviewed)abstract
- Nanocrystalline powder of MgFe2O4 was successfully synthesized by a cost effective novel combustion route. Nitrates of the constituent elements and glycine were respectively used as an oxidizer and fuel to drive the reaction. The effect of glycine to nitrate molar ratio (G N−1) on the structure and formation of MgFe2O4 was studied in view of thermodynamic considerations like adiabatic flame temperature and gas evolved during the combustion. The as prepared powder was characterized by X-Ray Diffraction (XRD), Fourier Transform Infra Red (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) for formation and microstructure analysis at various G N−1 ratios. XRD results revealed that the crystallinity of MgFe2O4 is insensitive to G N−1 variations and fuel lean combustion also lead to appropriate MgFe2O4 phase formation. Thermo Gravimetric-Differential Thermal Analysis (TG-DTA) for the precursor gel demonstrated the occurrence of rapid chemical reaction between glycine and nitrates at around 194 °C corresponding to ignition of precursors at this temperature. Transmission electron microscopy image for as prepared stoichiometric sample shows formation of nanoparticles of sizes from 28 nm to 50 nm. SEM images of MgFe2O4 nanoparticles at G N−1 ratio show remarkable change in microstructure regarding porosity and grain size. Room temperature magnetic measurements for stoichiometric sample show the magnetization (Ms) and remanence (Mr) of about 31.56 emu g−1 and 9.60 emu g−1 at ±10 kOe respectively.
|
|
36. |
- Khot, V, et al.
(author)
-
Induction heating studies of combustion synthesized MgFe2O4 nanoparticles for hyperthermia applications
- 2013
-
In: Journal of Magnetism and Magnetic Materials. - : Elsevier. - 0304-8853 .- 1873-4766. ; 332:April, s. 48-51
-
Journal article (peer-reviewed)abstract
- The structural, magnetic and ac magnetically induced heating characteristics of combustion synthesized MgFe2O4 nanoparticles have been investigated for application in magnetic particle hyperthermia. As prepared nanoparticles showed ferrimagnetic behavior at room temperature with magnetization of about 33.83 emu/g at ±15 kOe. The solid state MgFe2O4 nanoparticles exhibited specific absorption rate (SAR) of about 297 W/g at physiological safe range of frequency and amplitude. The increase in SAR and heating temperature in ac magnetic field was thought to be due to enhancement in magnetic hysteresis loss caused by dipole–dipole interactions in combustion synthesized MgFe2O4 nanoparticles.
|
|
37. |
- Khot, V, et al.
(author)
-
Low-temperature synthesis of MnxMg1− xFe2O4 (x= 0–1) nanoparticles : cation distribution, structural and magnetic properties
- 2013
-
In: Journal of Physics D. - : Institute of Physics Publishing (IOPP). - 0022-3727 .- 1361-6463. ; 46
-
Journal article (peer-reviewed)abstract
- Nanoferrites having composition MnxMg1−xFe2O4(x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) are synthesized by a low-temperature combustion method. The particle size measured from transmission electron microscopy and x-ray diffraction (XRD) patterns confirms the nanosized dimension of the as-prepared powder. From the analysis of XRD data with Scherrer's formula, the average crystallite size ranges from 23 to 33 nm and the lattice parameter ranges from 8.385 to 8.468 Å. Substitution of Mn2+ in MgFe2O4 causes an increase in the lattice constant, and this moderately distorts the lattice. Magnetic properties such as magnetization (Ms), coercivity (Hc) and remanence (Mr) with increasing Mn2+ concentration are studied at room temperature by a vibrating sample magnetometer. Substitution of Mn2+ for Mg2+ increases Ms from 34.5 to 54.5 emu g−1 and decreases Hc from 51.0 to 45.0 Oe. The results imply that the low-temperature combustion method is an efficient route for synthesis of nanoferrites without any extra calcination step. The as-prepared Mg–Mn ferrites are suitable for memory and switching circuits in digital computers.
|
|
38. |
- Lo Faro, Valeria, Postdoc, et al.
(author)
-
Novel ancestry-specific primary open-angle glaucoma loci and shared biology with vascular mechanisms and cell proliferation
- 2024
-
In: Cell Reports Medicine. - : Elsevier. - 2666-3791. ; 5:2
-
Journal article (peer-reviewed)abstract
- Primary open -angle glaucoma (POAG), a leading cause of irreversible blindness globally, shows disparity in prevalence and manifestations across ancestries. We perform meta -analysis across 15 biobanks (of the Global Biobank Meta -analysis Initiative) (n = 1,487,441: cases = 26,848) and merge with previous multiancestry studies, with the combined dataset representing the largest and most diverse POAG study to date (n = 1,478,037: cases = 46,325) and identify 17 novel significant loci, 5 of which were ancestry specific. Gene -enrichment and transcriptome-wide association analyses implicate vascular and cancer genes, a fifth of which are primary ciliary related. We perform an extensive statistical analysis of SIX6 and CDKN2B-AS1 loci in human GTEx data and across large electronic health records showing interaction between SIX6 gene and causal variants in the chr9p21.3 locus, with expression effect on CDKN2A/B. Our results suggest that some POAG risk variants may be ancestry specific, sex specific, or both, and support the contribution of genes involved in programmed cell death in POAG pathogenesis.
|
|
39. |
- Meshram, Jagruti, et al.
(author)
-
Structural, spectroscopic and anti-microbial inspection of PEG capped ZnO nanoparticles for biomedical applications
- 2018
-
In: Materials Research Express. - : IOP Publishing. - 2053-1591. ; 5:4
-
Journal article (peer-reviewed)abstract
- Zinc oxide (ZnO) nanoparticles (NPs) have a wide range of biomedical applications. Present study demonstrates the new methodology in sol-gel technology for synthesizing Polyethylene glycol (PEG) capped ZnO NPs and its size effect on anti-microbial activity. The reaction time was increased from 1 h to 5 h for the synthesis of ZnO NPs at 130 °C. The size of PEG capped ZnO NPs is increased from 10 to 84 nm by increasing the reaction upto 5 h. The x-ray diffraction studies and transmission electron microscopy analysis reveals the phase purity and hexagonal wurtzite crystal structure with uniform PEG capping on the surface of ZnO NPs. UV–visible spectroscopy exhibits the peak at 366 nm which is attributed to ZnO NPs. No adverse effect is observed in case of absorbance spectroscopy. Further, Fourier transforms infrared spectroscopy and thermo gravimetric analysis depicts the adsorption of PEG molecules on the ZnO NPs surface. The anti-microbial activities for both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria were studied by optical density (OD) mesurement. The remarkable anti-microbial activity was observed for PEG capped ZnO NPs synthesized at 1 h reaction time showing higher activity in comparison with that synthesized from 2 h to 5 h reaction time. The microbial growth was found to be inhibited after 10 h OD measurement for both the bacteria. The anti-microbial activity may be attributed to the generation of ROS and H2O2. However, these generated species plays a vital role in inhibition of microbial growth. Hence, PEG capped ZnO NPs has promising biomedical applications.
|
|
40. |
- Norrman, Andreas, et al.
(author)
-
Key issues for a telecom supplier in the transition towards a software focused supply chain
- 2003
-
In: Logistics and networked organisations : proceedings of the 8th International Symposium on Logistics, Sevilla, Spain, 6 - 8th July 2003. - 0853581215 ; , s. 17-28
-
Conference paper (peer-reviewed)abstract
- Based on a case study of a telecom company’s transition towards more software value in their products, we describe and discuss SCM issues related to when traditional manufacturers go from a “hardware focus” to a mixed product configuration. Although software supply chain is not much discussed in logistics, it seems that logistics/SCM frameworks also fit many software supply issues. A specific software issue might be to control the software “product flow” and adopt the “money flow” to software’s increased part of delivered value. Here we propose “Right To Use” licenses as connector between software and “supply chain flows”.
|
|
41. |
- Norrman, Andreas, et al.
(author)
-
Re-organising the logistics resources of companies after mergers and acquisitions
- 2003
-
In: Logistics and networked organisations : proceedings of the 8th International Symposium on Logistics, Sevilla, Spain, 6 - 8th July 2003. - 0853581215 ; , s. 525-532
-
Conference paper (peer-reviewed)abstract
- This paper discusses the relation between logistics and Mergers and Acquisitions (M&A) of companies within the same industry and same industry level (i.e. horizontal M&A). The purpose is to study the effects of M&A on the logistics resources of companies and the possibility for companies to benefit from the re-organising of these resources in the form of synergies. The study hopes to add to existing knowledge by examining the logistics aspects of M&A situations, which has remained a fairly unexplored field in M&A research. The paper reports on the results of a multiple case study covering eight horizontal M&A deals performed by Finnish companies during 1997-2002 in manufacturing industries. The study provides empirical evidence on the importance of logistics aspects as direct or indirect M&A objectives, and as a potential source for value creation in M&A. The gathered empirical data is fairly narrow, however the reported results provide a good basis for continuing the construction of tentative theory in this research area.
|
|
42. |
- Nunes, Diogo Jp, et al.
(author)
-
Effect of nitrogen availability on the poly-3-d-hydroxybutyrate accumulation by engineered Saccharomyces cerevisiae
- 2017
-
In: AMB Express. - : Springer Science and Business Media LLC. - 2191-0855. ; 7:1
-
Journal article (peer-reviewed)abstract
- Poly-3-d-hydroxybutyrate (or PHB) is a polyester which can be used in the production of biodegradable plastics from renewable resources. It is naturally produced by several bacteria as a response to nutrient starvation in the excess of a carbon source. The yeast Saccharomyces cerevisiae could be an alternative production host as it offers good inhibitor tolerance towards weak acids and phenolic compounds and does not depolymerize the produced PHB. As nitrogen limitation is known to boost the accumulation of PHB in bacteria, the present study aimed at investigating the effect of nitrogen availability on PHB accumulation in two recombinant S. cerevisiae strains harboring different xylose consuming and PHB producing pathways: TMB4443 expressing an NADPH-dependent acetoacetyl-CoA reductase and a wild-type S. stipitis XR with preferential use of NADPH and TMB4425 which expresses an NADH-dependent acetoacetyl-CoA reductase and a mutated XR with a balanced affinity for NADPH/NADH. TMB4443 accumulated most PHB under aerobic conditions and with glucose as sole carbon source, whereas the highest PHB concentrations were obtained with TMB4425 under anaerobic conditions and xylose as carbon source. In both cases, the highest PHB contents were obtained with high availability of nitrogen. The major impact of nitrogen availability was observed in TMB4425, where a 2.7-fold increase in PHB content was obtained. In contrast to what was observed in natural PHB-producing bacteria, nitrogen deficiency did not improve PHB accumulation in S. cerevisiae. Instead the excess available carbon from xylose was shunted into glycogen, indicating a significant gluconeogenic activity on xylose.
|
|
43. |
|
|
44. |
|
|
45. |
- Pawar, R. A., et al.
(author)
-
Photoelectrochemical and photocatalytic activity of nanocrystalline TiO2 thin films deposited by chemical bath deposition method
- 2021
-
In: Journal of materials science. Materials in electronics. - : Springer. - 0957-4522 .- 1573-482X.
-
Journal article (peer-reviewed)abstract
- The thin films of nanocrystalline TiO2 were synthesized using titanium isopropoxide as a source of Ti on fluorine-doped tin oxide (FTO) and commercial glass substrates by chemical bath deposition method. The resultant films were annealed at different temperatures (300, 400 and 500 °C) for 3 h. The annealed nanocrystalline thin films were thoroughly characterized by XRD, SEM, UV–Vis. DRS, PL, FT-IR, Raman and TEM. The XRD study shows the average crystallite size of TiO2 is 15 nm having anatase phase, while as temperature increases crystallite size increases. SEM and TEM results show elongated spherical shape of TiO2 nanocrystals. Optical absorption spectra show the band gap energy decreases from 3.2 to 3.1 eV as annealing temperature increases. From the PL spectra, an emission peak observed at 600 nm is due to the indirect band gap and defects present in the material. The FT-IR spectrum of TiO2 thin film annealed at 400 °C shows the band at 532 cm−1 due to O–Ti–O stretching vibrations confirms the formation of anatase TiO2. The Raman spectrum shows an intense peak at 149 cm−1 and four weaker peaks are characteristics of anatase phase of TiO2. The photodegradation efficiency of methyl orange (MO) was observed to be 92% by using TiO2 thin film within 90 min under UV–Vis. light. It shows enhanced photoconversion efficiency of 1.02% under UV light. © 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
|
|
46. |
- Pawar, Sunayna S., et al.
(author)
-
Comparison of Tetrahydroisoquinoline (TIQ) Thiazole and Oxazoline Ligands for Asymmetric Henry Reactions
- 2012
-
In: South African Journal of Chemistry. - 0379-4350 .- 1996-840X. ; 65, s. 23-29
-
Journal article (peer-reviewed)abstract
- A series of novel C-1 symmetric thiazole ligands with a tetrahydroisoquinoline (TIQ) backbone were synthesized. Their application in the catalytic asymmetric Henry reaction was investigated with comparison to a corresponding TIQ oxazoline ligand. The Cu(II)-oxazoline complex was more reactive and furnished moderate enantioselectivities up to 61:36 (syn:anti) with 75:25 diastereomeric excess, while the Cu(II)-thiazole complexes had lower selectivity. This is the first example where a direct comparison between an N, N-type thiazole and oxazoline ligands has been studied.
|
|
47. |
- Pawar, Sudhanshu S., et al.
(author)
-
MultiBio: Environmental services from a multipurpose biorefinery
- 2020
-
Reports (other academic/artistic)abstract
- MultiBio project aimed to establish and demonstrate a novel multipurpose biorefinery cascade concept, producing three renewable biobased products: 1) biohydrogen, 2) biopolymers and 3) protein rich meal ingredients for fish farming. The cascade concept exploits the ability of a bacterium (Caldicellulosiruptor saccharolyticus) to transform nutrients present in low-value waste process waters of the pulp and paper industry, to high-value products hydrogen gas, organic acids and microbial biomass. The organic acid rich effluent will then be managed in an open culture microbial process used to achieve discharge water quality objectives and to produce polyhydroxyalkanoate (PHA) biopolymers. Moreover, since C. saccharolyticus protein content is more than 63% of cell dry weight, their potential in formulation of fish feed was evaluated. A fiber sludge containing, CTMP residual stream was found to be a possible feedstock for the MultiBio process concept. Due to safety risks the demo-scale experiments of biohydrogen gas technology were moved from Biorefinery demo plant (Örnsköldsvik) of 40 m3 capacity to ATEX classified pilot-scale facility with 0.4 m3 capacity. Hence, bacterial biomass enough for the large-scale fish feed ingredient could not be produced. Lab-scale experiments with Caldicellulosiruptor cells as fish feed ingredient showed promising results as a protein-rich, sustainable fish feed ingredient. In addition, PHA biopolymer also showed favourable results as fish food ingredient for experiments at Gårdsfisk AB. Lab-scale experimental tests showed that the surplus activated sludge from the mills wastewater treatment could currently accumulate PHA to about 20 % of its dry weight. Mass balance evaluations based on realistically achievable expectations indicated a PHA biopolymer production potential of 3 600 tons of PHA per year from available organic residuals and for the two evaluated mills combined. The MultiBio concept has a positive climate impact in comparison with current treatment and moves developments in a positive direction to achieve 7 of the 10 Swedish environmental goals. Through a detailed feasibility analysis, a natural progression in next steps in scenarios were suggested for PHA production. The MultiBio cascade process can be implemented with further necessary development with good business potential and a positive effect on climate change. However, biohydrogen technology needs further developments before this cascade process concept can be implemented. Alternatively, a scenario with only biopolymer technology shows already a significant business potential and even larger positive effect on climate change. A successful next step in demonstration of the PHA biopolymer production scenario may lead to it being implemented within the next few years. Furthermore, MultiBio has attracted a lot of attention regionally and nationally but also internationally with a total of 65 media listings. A licentiate thesis and three university degree projects linked to the project have been completed. Overall, the MultiBio project has successfully achieved its goals and objectives.
|
|
48. |
- Phaadatare, M, et al.
(author)
-
Thermodynamic, structural and magnetic studies of NiFe2O4 nanoparticles prepared by combustion method : Effect of fuel
- 2013
-
In: Journal of Alloys and Compounds. - : Elsevier. - 0925-8388 .- 1873-4669. ; 546:5, s. 314-319
-
Journal article (peer-reviewed)abstract
- Nanocrystalline NiFe2O4 samples were prepared by chemical combustion route using different fuels as polyvinyl alcohol (PVA), glycine and urea. An interpretation for the mechanism of combustion reaction based on the measurement of the adiabatic flame temperature and the amount of gases evolved during reaction had been proposed. The thermal study of the precursor gel was done by using the Thermo Gravimetric-Differential Thermal Analysis (TG-DTA). Occurrence of the cubic spinel phase for all the samples was confirmed by X-ray diffraction (XRD) pattern. The magnetic characterization of all the samples was carried out by Quantum Design MPMS-XL instrument. The magnetic measurement showed the ferrimagnetic behaviour of all the nanoparticles while nanoparticles prepared by using urea as a fuel were found to have slightly greater crystallite size and relatively stronger A–O–B interaction compared to others.
|
|
49. |
- Phadatare, Manisha R., et al.
(author)
-
Enhancement of specific absorption rate by exchange coupling of the core–shell structure of magnetic nanoparticles for magnetic hyperthermia
- 2016
-
In: Journal of Physics D. - : Institute of Physics Publishing (IOPP). - 0022-3727 .- 1361-6463. ; 49:9
-
Journal article (peer-reviewed)abstract
- Conversion of electromagnetic energy into heat by nanoparticles (NPs) has the potential to be a powerful, non-invasive technique for biomedical applications such as magnetic fluid hyperthermia, drug release, disease treatment and remote control of single cell functions, but poor conversion efficiencies have hindered practical applications so far. In this paper, an attempt has been made to increase the efficiency of magnetic thermal induction by NPs. To increase the efficiency of magnetic thermal induction by NPs, one can take advantage of the exchange coupling between a magnetically hard core and magnetically soft shell to tune the magnetic properties of the NP and maximize the specific absorption rate, which is the gauge of conversion efficiency. In order to examine the tunability of magnetocrystalline anisotropy and its magnetic heating power, a representative magnetically hard material (CoFe2O4) has been coupled to a soft material (Ni0.5Zn0.5Fe2O4). The synthesized NPs show specific absorption rates that are of an order of magnitude larger than the conventional one.
|
|
50. |
- Phadatare, Manisha R., et al.
(author)
-
Studies on polyethylene glycol coating on NiFe2O4 nanoparticles for biomedical applications
- 2012
-
In: Journal of Magnetism and Magnetic Materials. - : Elsevier. - 0304-8853 .- 1873-4766. ; 324:5, s. 770-772
-
Journal article (peer-reviewed)abstract
- The NiFe2O4 nanoparticles were prepared by the combustion method and these nanoparticles were successfully coated with polyethylene glycol (PEG) for the possible biomedical applications such as magnetic resonance imaging, drug delivery, tissue repair, magnetic fluid hyperthermia etc. The structural and magnetic characterizations of NiFe2O4 nanoparticles were carried out by x-ray diffraction and vibrating sample magnetometry techniques, respectively. The morphology of the uncoated and coated nanoparticles was studied by scanning electron microscopy. The existence of PEG layer on NiFe2O4 nanoparticles was confirmed by fourier transform infrared spectroscopy technique.
|
|