| 1. |
- Tran, Ngoc Hieu, et al.
(author)
-
Genetic profiling of Vietnamese population from large-scale genomic analysis of non-invasive prenatal testing data
- 2020
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 10:1
-
Journal article (peer-reviewed)abstract
- The under-representation of several ethnic groups in existing genetic databases and studies have undermined our understanding of the genetic variations and associated traits or diseases in many populations. Cost and technology limitations remain the challenges in performing large-scale genome sequencing projects in many developing countries, including Vietnam. As one of the most rapidly adopted genetic tests, non-invasive prenatal testing (NIPT) data offers an alternative untapped resource for genetic studies. Here we performed a large-scale genomic analysis of 2683 pregnant Vietnamese women using their NIPT data and identified a comprehensive set of 8,054,515 single-nucleotide polymorphisms, among which 8.2% were new to the Vietnamese population. Our study also revealed 24,487 disease-associated genetic variants and their allele frequency distribution, especially 5 pathogenic variants for prevalent genetic disorders in Vietnam. We also observed major discrepancies in the allele frequency distribution of disease-associated genetic variants between the Vietnamese and other populations, thus highlighting a need for genome-wide association studies dedicated to the Vietnamese population. The resulted database of Vietnamese genetic variants, their allele frequency distribution, and their associated diseases presents a valuable resource for future genetic studies.
|
|
| 2. |
- Arzoumanian, Doris, et al.
(author)
-
Dust polarized emission observations of NGC 6334: BISTRO reveals the details of the complex but organized magnetic field structure of the high-mass star-forming hub-filament network
- 2021
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 647
-
Journal article (peer-reviewed)abstract
- Context. Molecular filaments and hubs have received special attention recently thanks to new studies showing their key role in star formation. While the (column) density and velocity structures of both filaments and hubs have been carefully studied, their magnetic field (B-field) properties have yet to be characterized. Consequently, the role of B-fields in the formation and evolution of hub-filament systems is not well constrained. Aims. We aim to understand the role of the B-field and its interplay with turbulence and gravity in the dynamical evolution of the NGC 6334 filament network that harbours cluster-forming hubs and high-mass star formation. Methods. We present new observations of the dust polarized emission at 850 μm toward the 2 pc × 10 pc map of NGC 6334 at a spatial resolution of 0.09 pc obtained with the James Clerk Maxwell Telescope (JCMT) as part of the B-field In STar-forming Region Observations (BISTRO) survey. We study the distribution and dispersion of the polarized intensity (PI), the polarization fraction (PF), and the plane-of-The-sky B-field angle (χB_POS) toward the whole region, along the 10 pc-long ridge and along the sub-filaments connected to the ridge and the hubs. We derived the power spectra of the intensity and χBPOS along the ridge crest and compared them with the results obtained from simulated filaments. Results. The observations span 3 orders of magnitude in Stokes I and PI and 2 orders of magnitude in PF (from 0.2 to 20%). A large scatter in PI and PF is observed for a given value of I. Our analyses show a complex B-field structure when observed over the whole region ( 10 pc); however, at smaller scales (1 pc), χBPOS varies coherently along the crests of the filament network. The observed power spectrum of χBPOS can be well represented with a power law function with a slope of-1.33 ± 0.23, which is 20% shallower than that of I. We find that this result is compatible with the properties of simulated filaments and may indicate the physical processes at play in the formation and evolution of star-forming filaments. Along the sub-filaments, χBPOS rotates frombeing mostly perpendicular or randomly oriented with respect to the crests to mostly parallel as the sub-filaments merge with the ridge and hubs. This variation of the B-field structure along the sub-filaments may be tracing local velocity flows of infalling matter in the ridge and hubs. Our analysis also suggests a variation in the energy balance along the crests of these sub-filaments, from magnetically critical or supercritical at their far ends to magnetically subcritical near the ridge and hubs. We also detect an increase in PF toward the high-column density (NH2 â 1023 cm-2) star cluster-forming hubs. These latter large PF values may be explained by the increase in grain alignment efficiency due to stellar radiation from the newborn stars, combined with an ordered B-field structure. Conclusions. These observational results reveal for the first time the characteristics of the small-scale (down to 0.1 pc) B-field structure of a 10 pc-long hub-filament system. Our analyses show variations in the polarization properties along the sub-filaments that may be tracing the evolution of their physical properties during their interaction with the ridge and hubs. We also detect an impact of feedback from young high-mass stars on the local B-field structure and the polarization properties, which could put constraints on possible models for dust grain alignment and provide important hints as to the interplay between the star formation activity and interstellar B-fields.
|
|
| 3. |
- Ching, Tao-Chung, et al.
(author)
-
The JCMT BISTRO-2 Survey: Magnetic Fields of the Massive DR21 Filament
- 2022
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:2
-
Journal article (peer-reviewed)abstract
- We present 850 mu m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the subfilaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1-10 pc scales. The magnetic fields revealed in the Planck data are well-aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6-1.0 mG in the DR21 filament and similar to 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by James Clerk Maxwell Telescope. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and subfilaments.
|
|
| 4. |
- Eswaraiah, Chakali, et al.
(author)
-
The JCMT BISTRO Survey: Revealing the Diverse Magnetic Field Morphologies in Taurus Dense Cores with Sensitive Submillimeter Polarimetry
- 2021
-
In: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 912:2
-
Journal article (peer-reviewed)abstract
- We have obtained sensitive dust continuum polarization observations at 850 μm in the B213 region of Taurus using POL-2 on SCUBA-2 at the James Clerk Maxwell Telescope as part of the B-fields in STar-forming Region Observations (BISTRO) survey. These observations allow us to probe magnetic field (B-field) at high spatial resolution (∼2000 au or ∼0.01 pc at 140 pc) in two protostellar cores (K04166 and K04169) and one prestellar core (Miz-8b) that lie within the B213 filament. Using the Davis-Chandrasekhar-Fermi method, we estimate the B-field strengths in K04166, K04169, and Miz-8b to be 38 ± 14, 44 ± 16, and 12 ± 5 μG, respectively. These cores show distinct mean B-field orientations. The B-field in K04166 is well ordered and aligned parallel to the orientations of the core minor axis, outflows, core rotation axis, and large-scale uniform B-field, in accordance with magnetically regulated star formation via ambipolar diffusion taking place in K04166. The B-field in K04169 is found to be ordered but oriented nearly perpendicular to the core minor axis and large-scale B-field and not well correlated with other axes. In contrast, Miz-8b exhibits a disordered B-field that shows no preferred alignment with the core minor axis or large-scale field. We found that only one core, K04166, retains a memory of the large-scale uniform B-field. The other two cores, K04169 and Miz-8b, are decoupled from the large-scale field. Such a complex B-field configuration could be caused by gas inflow onto the filament, even in the presence of a substantial magnetic flux.
|
|
| 5. |
- Karoly, Janik, et al.
(author)
-
The JCMT BISTRO Survey: Studying the Complex Magnetic Field of L43
- 2023
-
In: Astrophysical Journal. - 1538-4357 .- 0004-637X. ; 952:1
-
Journal article (peer-reviewed)abstract
- We present observations of polarized dust emission at 850 mu m from the L43 molecular cloud, which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense (N-H2 similar to 10(22) - 10(23) cm(-2)) complex molecular cloud with a submillimeter-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to similar to 160 +/- 30 mu G in the main starless core and up to similar to 90 +/- 40 mu G in the more diffuse, extended region. These field strengths give magnetically super- and subcritical values, respectively, and both are found to be roughly trans-Alfvenic. We also present a new method of data reduction for these denser but fainter objects like starless cores.
|
|
| 6. |
- Kwon, Woojin, et al.
(author)
-
B-fields in Star-forming Region Observations (BISTRO): Magnetic Fields in the Filamentary Structures of Serpens Main
- 2022
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 926:2
-
Journal article (peer-reviewed)abstract
- We present 850 mu m polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope as part of the B-fields In STar-forming Region Observations survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less-dense filamentary structures where NH2 < 0.93 x 10(22) cm(-2) (magnetic fields perpendicular to density gradients), while they are perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at NH2 approximate to 4.6 x 10(22) NH2 approximate to 16 x 10(22) cm(-2), magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments (B-POS = 60-300 mu G)) using the Davis-Chandrasekhar-Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities.
|
|
| 7. |
- Lam, Thua-Phong, et al.
(author)
-
Flavonoids as dual-target inhibitors against α-glucosidase and α-amylase : a systematic review of in vitro studies
- 2024
-
In: NATURAL PRODUCTS AND BIOPROSPECTING. - : Springer. - 2192-2195 .- 2192-2209. ; 14:1
-
Research review (peer-reviewed)abstract
- Diabetes mellitus remains a major global health issue, and great attention is directed at natural therapeutics. This systematic review aimed to assess the potential of flavonoids as antidiabetic agents by investigating their inhibitory effects on alpha-glucosidase and alpha-amylase, two key enzymes involved in starch digestion. Six scientific databases (PubMed, Virtual Health Library, EMBASE, SCOPUS, Web of Science, and WHO Global Index Medicus) were searched until August 21, 2022, for in vitro studies reporting IC50 values of purified flavonoids on alpha-amylase and alpha-glucosidase, along with corresponding data for acarbose as a positive control. A total of 339 eligible articles were analyzed, resulting in the retrieval of 1643 flavonoid structures. These structures were rigorously standardized and curated, yielding 974 unique compounds, among which 177 flavonoids exhibited inhibition of both alpha-glucosidase and alpha-amylase are presented. Quality assessment utilizing a modified CONSORT checklist and structure-activity relationship (SAR) analysis were performed, revealing crucial features for the simultaneous inhibition of flavonoids against both enzymes. Moreover, the review also addressed several limitations in the current research landscape and proposed potential solutions. The curated datasets are available online at https://github.com/MedChemUMP/FDIGA.
|
|
| 8. |
- Lyo, A-Ran, et al.
(author)
-
The JCMT BISTRO Survey: An 850/450 mu m Polarization Study of NGC 2071IR in Orion B
- 2021
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 918:2
-
Journal article (peer-reviewed)abstract
- We present the results of simultaneous 450 mu m and 850 mu m polarization observations toward the massive star-forming region NGC 2071IR, a target of the BISTRO (B-fields in STar-forming Region Observations) Survey, using the POL-2 polarimeter and SCUBA-2 camera mounted on the James Clerk Maxwell Telescope. We find a pinched magnetic field morphology in the central dense core region, which could be due to a rotating toroidal disklike structure and a bipolar outflow originating from the central young stellar object IRS 3. Using the modified Davis-Chandrasekhar-Fermi method, we obtain a plane-of-sky magnetic field strength of 563 +/- 421 mu G in the central similar to 0.12 pc region from 850 mu m polarization data. The corresponding magnetic energy density of 2.04 x 10(-8) erg cm(-3) is comparable to the turbulent and gravitational energy densities in the region. We find that the magnetic field direction is very well aligned with the whole of the IRS 3 bipolar outflow structure. We find that the median value of polarization fractions is 3.0% at 450 mu m in the central 3 ' region, which is larger than the median value of 1.2% at 850 mu m. The trend could be due to the better alignment of warmer dust in the strong radiation environment. We also find that polarization fractions decrease with intensity at both wavelengths, with slopes, determined by fitting a Rician noise model of 0.59 +/- 0.03 at 450 mu m and 0.36 +/- 0.04 at 850 mu m, respectively. We think that the shallow slope at 850 mu m is due to grain alignment at the center being assisted by strong radiation from the central young stellar objects.
|
|
| 9. |
- Ngoc, Nguyen Bich, et al.
(author)
-
Observations of Magnetic Fields Surrounding LkH alpha 101 Taken by the BISTRO Survey with JCMT-POL-2
- 2021
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 908:1
-
Journal article (peer-reviewed)abstract
- We report the first high spatial resolution measurement of magnetic fields surrounding LkH alpha 101, part of the Auriga-California molecular cloud. The observations were taken with the POL-2 polarimeter on the James Clerk Maxwell Telescope within the framework of the B-fields In Star-forming Region Observations (BISTRO) survey. Observed polarization of thermal dust emission at 850 mu m is found to be mostly associated with the redshifted gas component of the cloud. The magnetic field displays a relatively complex morphology. Two variants of the Davis-Chandrasekhar-Fermi method, unsharp masking and structure function, are used to calculate the strength of magnetic fields in the plane of the sky, yielding a similar result of B-POS similar to 115 mu G. The mass-to-magnetic-flux ratio in critical value units, lambda similar to 0.3, is the smallest among the values obtained for other regions surveyed by POL-2. This implies that the LkH alpha 101 region is subcritical, and the magnetic field is strong enough to prevent gravitational collapse. The inferred delta B/B-0 similar to 0.3 implies that the large-scale component of the magnetic field dominates the turbulent one. The variation of the polarization fraction with total emission intensity can be fitted by a power law with an index of alpha = 0.82 0.03, which lies in the range previously reported for molecular clouds. We find that the polarization fraction decreases rapidly with proximity to the only early B star (LkH alpha 101) in the region. Magnetic field tangling and the joint effect of grain alignment and rotational disruption by radiative torques can potentially explain such a decreasing trend.
|
|
| 10. |
- Pham, Em Canh, et al.
(author)
-
N,2,6-Trisubstituted 1H-benzimidazole derivatives as a new scaffold of antimicrobial and anticancer agents : design, synthesis, in vitro evaluation, and in silico studies
- 2023
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 13:1, s. 399-420
-
Journal article (peer-reviewed)abstract
- Compounds containing benzimidazole moiety occupy privileged chemical space for discovering new bioactive substances. In continuation of our recent work, 69 benzimidazole derivatives were designed and synthesized with good to excellent yields of 46-99% using efficient synthesis protocol i.e. sodium metabisulfite catalyzed condensation of aromatic aldehydes with o-phenylenediamines to form 2-arylbenzimidazole derivatives followed by N-alkylation by conventional heating or microwave irradiation for diversification. Potent antibacterial compounds against MSSA and MRSA were discovered such as benzimidazole compounds 3k (2-(4-nitrophenyl), N-benzyl), 3l (2-(4-chlorophenyl), N-(4-chlorobenzyl)), 4c (2-(4-chlorophenyl), 6-methyl, N-benzyl), 4g (2-(4-nitrophenyl), 6-methyl, N-benzyl), and 4j (2-(4-nitrophenyl), 6-methyl, N-(4-chlorobenzyl)) with MIC of 4-16 mu g mL(-1). In addition, compound 4c showed good antimicrobial activities (MIC = 16 mu g mL(-1)) against the bacteria strains Escherichia coli and Streptococcus faecalis. Moreover, compounds 3k, 3l, 4c, 4g, and 4j have been found to kill HepG2, MDA-MB-231, MCF7, RMS, and C26 cancer cells with low mu M IC50 (2.39-10.95). These compounds showed comparable drug-like properties as ciprofloxacin, fluconazole, and paclitaxel in computational ADMET profiling. Finally, docking studies were used to assess potential protein targets responsible for their biological activities. Especially, we found that DHFR is a promising target both in silico and in vitro with compound 4c having IC50 of 2.35 mu M.
|
|
| 11. |
- Chu, Dinh-Toi, et al.
(author)
-
An update on obesity : Mental consequences and psychological interventions
- 2019
-
In: Diabetes & Metabolic syndrome. - : Elsevier. - 1871-4021 .- 1878-0334. ; 13:1, s. 155-160
-
Research review (peer-reviewed)abstract
- Besides physical consequences, obesity has negative psychological effects, thereby lowering human life quality. Major psychological consequences of this disorder includes depression, impaired body image, low self-esteem, eating disorders, stress and poor quality of life, which are correlated with age and gender. Physical interventions, mainly diet control and energy balance, have been widely applied to treat obesity; and some psychological interventions including behavioral therapy, cognitive behavioral therapy and hypnotherapy have showed some effects on obesity treatment. Other psychological therapies, such as relaxation and psychodynamic therapies, are paid less attention. This review aims to update scientific evidence regarding the mental consequences and psychological interventions for obesity. (c) 2018 Diabetes India. Published by Elsevier Ltd. All rights reserved.
|
|
| 12. |
- Pham, Thi Anh Mai, et al.
(author)
-
Evaluation of screening algorithms to detect rectal colonization with carbapenemase-producing Enterobacterales in a resource-limited setting
- 2024
-
In: JAC - Antimicrobial Resistance. - : OXFORD UNIV PRESS. - 2632-1823. ; 6:3
-
Journal article (peer-reviewed)abstract
- Objectives To improve and rationalize the detection of carbapenemase-producing Enterobacterales (CPE) in rectal swabs in a high-prevalence and resource-constrained setting, addressing surveillance challenges typically encountered in laboratories with limited resources.Methods A point prevalence survey (PPS) was conducted on 15 August 2022, in a provincial children's hospital in northern Vietnam. Rectal swab samples of all admitted children were collected and plated on a selective medium for carbapenem-resistant Enterobacterales (CRE). Species identification and antimicrobial susceptibility testing (AST) were performed by MALDI-TOF, and VITEK2 XL and interpreted according to CLSI breakpoints (2022). Carbapenemases were detected by the carbapenem inactivation method (CIM) and quantitative real-time PCR (qRT-PCR).Results Rectal swab samples were obtained from 376 patients. Of 178 isolates growing on the CRE screening agar, 140 isolates were confirmed as Enterobacterales of which 118 (84.3%) isolates were resistant to meropenem and/or ertapenem. CIM and PCR showed that 90/118 (76.3%) were carbapenemase producers. Overall, 83/367 (22.6%) were colonized by CPE. Klebsiella pneumoniae, Escherichia coli and Enterobacter cloacae complex were the most common CPE detected, with NDM as the predominant carbapenemase (78/90; 86.7%). Phenotypic resistance to meropenem was the best predictor of CPE production (sensitivity 85.6%, specificity 100%) compared with ertapenem resistance (95.6% sensitivity, 36% specificity). CIM was 100% concordant with PCR in detecting carbapenemases.Conclusions These findings underscore the effectiveness of meropenem resistance as a robust indicator of the production of carbapenemases and the reliability of the CIM method to detect such carbapenemases in resource-limited settings where the performance of molecular methods is not possible.
|
|
| 13. |
- Phu, Vu Dinh, et al.
(author)
-
Burden of Hospital Acquired Infections and Antimicrobial Use in Vietnamese Adult Intensive Care Units
- 2016
-
In: PLOS ONE. - : PUBLIC LIBRARY SCIENCE. - 1932-6203. ; 11:1
-
Journal article (peer-reviewed)abstract
- Background Vietnam is a lower middle-income country with no national surveillance system for hospital-acquired infections (HAIs). We assessed the prevalence of hospital-acquired infections and antimicrobial use in adult intensive care units (ICUs) across Vietnam. Methods Monthly repeated point prevalence surveys were systematically conducted to assess HAI prevalence and antimicrobial use in 15 adult ICUs across Vietnam. Adults admitted to participating ICUs before 08: 00 a.m. on the survey day were included. Results Among 3287 patients enrolled, the HAI prevalence was 29.5% (965/3266 patients, 21 missing). Pneumonia accounted for 79.4% (804/1012) of HAIs Most HAIs (84.5% [855/1012]) were acquired in the survey hospital with 42.5% (363/855) acquired prior to ICU admission and 57.5% (492/855) developed during ICU admission. In multivariate analysis, the strongest risk factors for HAI acquired in ICU were: intubation (OR 2.76), urinary catheter (OR 2.12), no involvement of a family member in patient care (OR 1.94), and surgery after admission (OR 1.66). 726 bacterial isolates were cultured from 622/1012 HAIs, most frequently Acinetobacter baumannii (177/726 [24.4%]), Pseudomonas aeruginosa (100/726 [13.8%]), and Klebsiella pneumoniae (84/726 [11.6%]), with carbapenem resistance rates of 89.2%, 55.7%, and 14.9% respectively. Antimicrobials were prescribed for 84.8% (2787/ 3287) patients, with 73.7% of patients receiving two or more. The most common antimicrobial groups were third generation cephalosporins, fluoroquinolones, and carbapenems (20.1%, 19.4%, and 14.1% of total antimicrobials, respectively). Conclusion A high prevalence of HAIs was observed, mainly caused by Gram-negative bacteria with high carbapenem resistance rates. This in combination with a high rate of antimicrobial use illustrates the urgent need to improve rational antimicrobial use and infection control efforts.
|
|
| 14. |
- Rahman, Khalil Ur, et al.
(author)
-
Evaluating the impact of the environment on depleting groundwater resources: a case study from a semi-arid and arid climatic region
- 2022
-
In: Hydrological Sciences Journal. - : Informa UK Limited. - 0262-6667 .- 2150-3435.
-
Journal article (peer-reviewed)abstract
- This study, for the first time, assesses the impact of critical environmental factors on groundwater using Bayesian network (BN) integrated with analytical hierarchy process (AHP) and develops a groundwater vulnerability map. The considered environmental factors are divided into the following categories: physical (rainfall, temperature (Tmax/Tmin), relative humidity (RHmax/RHmin)), water use and demand (surface water availability (SW) and number of tubewells (NTW)), agriculture and land use (total irrigated area (TIA), total cropped area (TCA), and total area sown (TAS)), and population. Results show a negative relationship of rainfall, RHmax/RHmin, and SW and a positive relationship of the remaining variables with groundwater. Elasticities demonstrate that a 1% change in SW (rainfall), major contributors, results in a decrease by 0.64% (0.55%) in groundwater in Bahawalpur (Multan). A 1% change in population (NTW), major consumers, results in an increase by 0.74% (0.70%) in depth to water table (DWT) across Jhang (Khanewal). The vulnerability map shows that high and very high vulnerability classes account for more than 50% of the total area of Punjab.
|
|
| 15. |
|
|
| 16. |
- Bentham, James, et al.
(author)
-
A century of trends in adult human height
- 2016
-
In: eLIFE. - 2050-084X. ; 5
-
Journal article (peer-reviewed)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.522.7) and 16.5 cm (13.319.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 17. |
- Bentham, James, et al.
(author)
-
A century of trends in adult human height
- 2016
-
In: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Journal article (peer-reviewed)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 18. |
- Berg, Håkan, et al.
(author)
-
An ecological economic comparison between integrated rice-fish farming and rice monocultures with low and high dikes in the Mekong Delta, Vietnam
- 2023
-
In: Ambio. - 0044-7447 .- 1654-7209. ; 52:9, s. 1462-1474
-
Journal article (peer-reviewed)abstract
- This study makes an ecological economic comparison between three different rice farming strategies in the Mekong Delta. Interviews were made with 30 farmers with two crops of rice and low dikes (2RLd), 30 farmers with three crops of rice and high dikes (3RHd) and 18 farmers with two crops of rice and one crop of fish (2RF). 2RF farmers had the highest annual net income and benefit cost ratio, because of low production costs and high yields of rice and fish. 2RLd farmers had the lowest annual net income. 3RHd had the highest annual rice yield, but also used the highest amount of rice seeds and agrochemicals, generating the lowest benefit cost ratio. Most farmers (70%) preferred two crops because of a higher production efficiency. High dikes and frequent use of pesticides and fertilizers were seen to decrease the water and rice quality, connectivity and biodiversity in farms with three crops. It is concluded that rice farming with two crops, and especially if integrated with fish and applying IPM, provides a sustainable alternative to rice farming with three crops and high dikes, because it makes use of the high connectivity within the rice-field ecosystem for an efficient production of healthy food through increased recycling of nutrients and natural pest control mechanisms.
|
|
| 19. |
- Borand, Laurence, et al.
(author)
-
Isolation of Nontuberculous Mycobacteria in Southeast Asian and African Human Immunodeficiency Virus-infected Children with Suspected Tuberculosis
- 2019
-
In: Clinical Infectious Diseases. - : Oxford University Press (OUP). - 1058-4838 .- 1537-6591. ; 68:10, s. 1750-1753
-
Journal article (peer-reviewed)abstract
- We enrolled 427 human immunodeficiency virus-infected children (median age, 7.3 years), 59.2% severely immunodeficient, with suspected tuberculosis in Southeast Asian and African settings. Nontuberculous mycobacteria were isolated in 46 children (10.8%); 45.7% of isolates were Mycobacterium avium complex. Southeast Asian origin, age 5-9 years, and severe immunodeficiency were independently associated with nontuberculous mycobacteria isolation.
|
|
| 20. |
- Bukhanko, Natalia, et al.
(author)
-
Gas phase synthesis of isopropyl chloride from isopropanol and HCl over alumina and flexible 3-D carbon foam supported catalysts
- 2017
-
In: Applied Catalysis A. - : Elsevier. - 0926-860X .- 1873-3875. ; 542:25, s. 212-225
-
Journal article (peer-reviewed)abstract
- Isopropyl chloride synthesis from isopropanol and HCl in gas phase over ZnCl2 catalysts supported on Al2O3 as well as flexible carbon foam was studied in a continuous reactor. A series of catalytic materials were synthesised and characterised by BET, XPS, SEM, TEM, XRD and NH3-TPD methods. Catalytic activity tests (product selectivity and conversion of reactants) were performed for all materials and optimal reaction conditions (temperature and feedstock flow rates) were found. The results indicate that the highest yield of isopropyl chloride was obtained over 5 wt.% ZnCl2 on commercial Al2O3 (No. II) (95.3%). Determination of product mixture compositions and by-product identification were done using a GC-MS method. Carbon foam variant catalyst, 5 wt.% ZnCl2/C, was found to perform best out of the carbon-supported materials, achieving ∼75% yield of isopropyl chloride. The kinetic model describing the process in a continuous packed bed reactor was proposed and kinetic parameters were calculated. The activation energy for the formation of isopropyl chloride reaction directly from isopropanol and HCl was found to be ∼58 kJ/mol.
|
|
| 21. |
|
|
| 22. |
- Doi, Yasuo, et al.
(author)
-
The JCMT BISTRO Survey: Magnetic Fields Associated with a Network of Filaments in NGC 1333
- 2020
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 899:1
-
Journal article (peer-reviewed)abstract
- We present new observations of the active star formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (∼1.5 pc ? 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multiscale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ∼1 pc and remains continuous from the scales of filaments (∼0.1 pc) to that of protostellar envelopes (∼0.005 pc or ∼1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data toward the filament network.
|
|
| 23. |
- dos Reis, Glaydson Simões, et al.
(author)
-
Application of design of experiments (DoE) for optimised production of micro- and mesoporous Norway spruce bark activated carbons
- 2023
-
In: Biomass Conversion and Biorefinery. - : Springer. - 2190-6815 .- 2190-6823. ; 13:11, s. 10113-10131
-
Journal article (peer-reviewed)abstract
- In this work, Norway spruce (Picea abies (Karst) L.) bark was employed as a precursor to prepare activated carbon using zinc chloride (ZnCl2) as a chemical activator. The purpose of this study was to determine optimal activated carbon (AC) preparation variables by the response surface methodology using a Box–Behnken design (BBD) to obtain AC with high specific surface area (SBET), mesopore surface area (SMESO), and micropore surface area (SMICR). Variables and levels used in the design were pyrolysis temperature (700, 800, and 900 °C), holding time (1, 2, and 3 h), and bark/ZnCl2 impregnation ratio (1, 1.5, and 2). The optimal conditions for achieving the highest SBET were as follows: a pyrolysis temperature of 700 °C, a holding time of 1 h, and a spruce bark/ZnCl2 ratio of 1.5, which yielded an SBET value of 1374 m2 g−1. For maximised mesopore area, the optimal condition was at a pyrolysis temperature of 700 °C, a holding time of 2 h, and a bark/ZnCl2 ratio of 2, which yielded a SMESO area of 1311 m2 g−1, where mesopores (SMESO%) comprised 97.4% of total SBET. Correspondingly, for micropore formation, the highest micropore area was found at a pyrolysis temperature of 800 °C, a holding time of 3 h, and a bark/ZnCl2 ratio of 2, corresponding to 1117 m2 g−1, with 94.3% of the total SBET consisting of micropores (SMICRO%). The bark/ZnCl2 ratio and pyrolysis temperature had the strongest impact on the SBET, while the interaction between temperature and bark/ZnCl2 ratio was the most significant factor for SMESO. For the SMICRO, holding time was the most important factor. In general, the spruce bark AC showed predominantly mesoporous structures. All activated carbons had high carbon and low ash contents. Chemical characterisation indicated that the ACs presented disordered carbon structures with oxygen functional groups on the ACs’ surfaces. Well-developed porosity and a large surface area combined with favourable chemical composition render the activated carbons from Norway spruce bark with interesting physicochemical properties. The ACs were successfully tested to adsorb sodium diclofenac from aqueous solutions showing to be attractive products to use as adsorbents to tackle polluted waters. Graphical abstract: [Figure not available: see fulltext.].
|
|
| 24. |
- Gregoire, Eric, et al.
(author)
-
RENEB Inter-Laboratory comparison 2017 : limits and pitfalls of ILCs
- 2021
-
In: International Journal of Radiation Biology. - : Informa UK Limited. - 0955-3002 .- 1362-3095. ; 97:7, s. 888-905
-
Journal article (peer-reviewed)abstract
- Purpose: In case of a mass-casualty radiological event, there would be a need for networking to overcome surge limitations and to quickly obtain homogeneous results (reported aberration frequencies or estimated doses) among biodosimetry laboratories. These results must be consistent within such network. Inter-laboratory comparisons (ILCs) are widely accepted to achieve this homogeneity. At the European level, a great effort has been made to harmonize biological dosimetry laboratories, notably during the MULTIBIODOSE and RENEB projects. In order to continue the harmonization efforts, the RENEB consortium launched this intercomparison which is larger than the RENEB network, as it involves 38 laboratories from 21 countries. In this ILC all steps of the process were monitored, from blood shipment to dose estimation. This exercise also aimed to evaluate the statistical tools used to compare laboratory performance.Materials and methods: Blood samples were irradiated at three different doses, 1.8, 0.4 and 0 Gy (samples A, C and B) with 4-MV X-rays at 0.5 Gy min−1, and sent to the participant laboratories. Each laboratory was requested to blindly analyze 500 cells per sample and to report the observed frequency of dicentric chromosomes per metaphase and the corresponding estimated dose.Results: This ILC demonstrates that blood samples can be successfully distributed among laboratories worldwide to perform biological dosimetry in case of a mass casualty event. Having achieved a substantial harmonization in multiple areas among the RENEB laboratories issues were identified with the available statistical tools, which are not capable to advantageously exploit the richness of results of a large ILCs. Even though Z- and U-tests are accepted methods for biodosimetry ILCs, setting the number of analyzed metaphases to 500 and establishing a tests’ common threshold for all studied doses is inappropriate for evaluating laboratory performance. Another problem highlighted by this ILC is the issue of the dose-effect curve diversity. It clearly appears that, despite the initial advantage of including the scoring specificities of each laboratory, the lack of defined criteria for assessing the robustness of each laboratory’s curve is a disadvantage for the ‘one curve per laboratory’ model.Conclusions: Based on our study, it seems relevant to develop tools better adapted to the collection and processing of results produced by the participant laboratories. We are confident that, after an initial harmonization phase reached by the RENEB laboratories, a new step toward a better optimization of the laboratory networks in biological dosimetry and associated ILC is on the way.
|
|
| 25. |
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
|
|
| 29. |
|
|
| 30. |
|
|
| 31. |
|
|
| 32. |
|
|
| 33. |
|
|
| 34. |
|
|
| 35. |
|
|
| 36. |
|
|
| 37. |
|
|
| 38. |
|
|
| 39. |
- Hjort af Ornäs, Anders, 1944-, et al.
(author)
-
Water sub-sectors and the poor in Northern Vietnam
- 2004
-
In: Workshop on Swedish-Vietnamese Research and Development Cooperation during 35 years ¿ Lessons Learned and Future Perspectives,2004. - Hanoi : Sida.
-
Conference paper (other academic/artistic)
|
|
| 40. |
|
|
| 41. |
- Hoang, Minh Tam, et al.
(author)
-
Integrated Photoelectrolysis of Water Implemented On Organic Metal Halide Perovskite Photoelectrode
- 2016
-
In: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 8:19, s. 11904-11909
-
Journal article (peer-reviewed)abstract
- Herein we report on integrated photoelectrolysis of water employing organic metal halide (OMH) perovskite material. Generic OMH perovskite material and device architecture are highly susceptible to degradation by moisture and water. We found that decomposition of perovskite devices proceeds by water ingress through pinholes in upper layers and is strongly affected by applied bias/light and electrolyte pH. It was also found that a pinhole-free hole transport layer (HTL) could significantly enhance the stability of the perovskite photoelectrode, thereby extending the photoelectrode lifetime to several tens of minutes, which is an unprecedented record-long operation. Furthermore, a carbon nanotube (CNT)/polymer composite layer was developed that can effectively protect the underlying perovskite layer from electrolyte molecules.
|
|
| 42. |
- Huu Bich, Tran, et al.
(author)
-
Patterns of alcohol consumption in diverse rural populations in the Asian region
- 2009
-
In: Global Health Action. - : Informa UK Limited. - 1654-9716 .- 1654-9880. ; 2:1, s. 28-37
-
Journal article (peer-reviewed)abstract
- BACKGROUND: Alcohol abuse, together with tobacco use, is a major determinant of health and social well-being, and is one of the most important of 26 risk factors comparatively assessed in low and middle income countries, surpassed only by high blood pressure and tobacco. OBJECTIVES: The alcohol consumption patterns and the associations between consumption of alcohol and socio-demographic and cultural factors have been investigated in nine rural Health and Demographic Surveillance System (HDSS) located in five Asian countries. METHODS: The information was collected from multiple study sites, with sample sizes of sufficient size to measure trends in age and sex groups over time. Adopting the WHO STEPwise approach to Surveillance (WHO STEPS), stratified random sampling (in each 10-year interval) from the HDSS sampling frame was undertaken. Information regarding alcohol consumption and demographic indicators were collected using the WHO STEPwise standard surveillance form. The data from the nine HDSS sites were merged and analysed using STATA software version 10. RESULTS: Alcohol was rarely consumed in five of the HDSS (four in Bangladesh, and one in Indonesia). In the two HDSS in Vietnam (Chililab, Filabavi) and one in Thailand (Kanchanaburi), alcohol consumption was common in men. The mean number of drinks per day during the last seven days, and prevalence of at-risk drinker were found to be highest in Filabavi. The prevalence of female alcohol consumption was much smaller in comparison with men. In Chililab, people who did not go to school or did not complete primary education were more likely to drink in comparison to people who graduated from high school or university. CONCLUSIONS: Although uncommon in some countries because of religious and cultural practices, alcohol consumption patterns in some sites were cause for concern. In addition, qualitative studies may be necessary to understand the factors influencing alcohol consumption levels between the two sites in Vietnam and the site in Thailand in order to design appropriate interventions.
|
|
| 43. |
- Jakobsen, Frida, et al.
(author)
-
Urban livestock-keeping and dengue in urban and peri-urban Hanoi, Vietnam.
- 2019
-
In: PLoS Neglected Tropical Diseases. - : Public Library of Science (PLoS). - 1935-2727 .- 1935-2735. ; 13:11
-
Journal article (peer-reviewed)abstract
- Urban livestock provides an important source of food and income, but it may increase the risks for disease transmission. Vectors, such as mosquitoes, might increase and thereby cause an enhanced transmission of infectious diseases, such as dengue fever; considered the most important mosquito-borne viral disease globally. This cross-sectional study evaluated the awareness of dengue fever and investigated how the presence of dengue vectors is affected by the keeping of livestock in urban households in the city of Hanoi, Vietnam. From February to March 2018, during the season of lowest occurrence of dengue in Hanoi, 140 households were interviewed, of which 69 kept livestock. A general trend was observed; respondents living in the Dan Phuong district, a peri-urban district, had better knowledge and practice regarding dengue as compared to the urban Ha Dong district. In total, 3899 mosquitoes were collected and identified, of which 52 (1.33%) were Aedes species. A significant difference between the two districts was observed, with more households in Ha Dong having Aedes spp. mosquitoes (p = 0.02) and a higher incidence of dengue fever (p = 0.001). There was no significant association between livestock-rearing and the presence of Aedes spp. mosquitoes (p = 0.955), or between livestock-rearing and the incidence of dengue fever (p = 0.08). In conclusion, this study could not find any indication that households keeping livestock were at higher risk of dengue virus infections in Hanoi during the season of lowest occurrence of dengue, but clearly indicated the need of more information provided to urban inhabitants, particularly on personal protection.
|
|
| 44. |
- Kocík, Jaroslav, et al.
(author)
-
Screening of active solid catalysts for esterification of tall oil fatty acids with methanol
- 2017
-
In: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 155:1, s. 34-38
-
Journal article (peer-reviewed)abstract
- The paper is focused on the description of the activity/selectivity of mesoporous silica based materials loaded with various types of active species in the esterification of tall oil free fatty acids. The metals such as aluminium, molybdenum, gallium and zinc, including their combinations were impregnated on the mesoporous silica, which was tested in esterification reaction. All these catalysts preserved its tall oil free fatty conversion in the first and the second catalytic cycles. However, while only insignificant amount of gallium or molybdenum was lost from the solid catalyst into the liquid phases, zinc leached from every studied solid catalyst. In contrast to impregnated gallium on mesoporous silica, which exhibited higher acidity and higher tall oil free fatty acids conversion in the first catalytic cycle, but its value was not preserved in the second catalytic test.
|
|
| 45. |
- Minh, Hoang Van, et al.
(author)
-
Tobacco Control Policies in Vietnam : Review on MPOWER Implementation Progress and Challenges
- 2016
-
In: Asian Pacific Journal of Cancer Prevention. - 1513-7368. ; 17, s. 1-9
-
Journal article (peer-reviewed)abstract
- In Vietnam, the WHO Framework Convention on Tobacco Control (WHO FCTC) took effect in March 2005 while MPOWER has been implemented since 2008. This paper describes the progress and challenges of implementation of the MPOWER package in Vietnam. We can report that, in term of monitoring, Vietnam is very active in the Global Tobacco Surveillance System, completing two rounds of the Global Adult Tobacco Survey (GATS) and three rounds of the Global Youth Tobacco Survey (GYTS). To protect people from tobacco smoke, Vietnam has issued and enforced a law requiring comprehensive smoking bans at workplaces and public places since 2013. Tobacco advertising and promotion are also prohibited with the exception of points of sale displays of tobacco products. Violations come in the form of promotion girls, corporate social responsibility activities from tobacco manufacturers and packages displayed by retail vendors. Vietnam is one of the 77 countries that require pictorial health warnings to be printed on cigarette packages to warn about the danger of tobacco and the warnings have been implemented effectively. Cigarette tax is 70% of factory price which is equal to less than 45% of retail price and much lower than the recommendation of WHO. However, Vietnam is one of the very few countries that require manufacturers and importers to make "compulsory contributions" at 1-2% of the factory price of cigarettes sold in Vietnam for the establishment of a Tobacco Control Fund (TCF). The TCF is being operated well. In 2015, 67 units of 63 provinces/cities, 22 ministries and political-social organizations and 6 hospitals received funding from TCF to implement a wide range of tobacco control activities. Cessation services have been starting with a a toll-free quit-line but need to be further strengthened. In conclusion, Vietnam has constantly put efforts into the tobacco control field with high commitment from the government, scientists and activists. Though several remarkable achievements have been gained, many challenges remain. To overcome those challenges, implementation strategies that take into account the contextual factors and social determinants of tobacco use in Vietnam are needed.
|
|
| 46. |
- Ngoc Pham, Tung, et al.
(author)
-
Catalytic Hydrogenation of d-Xylose Over Ru Decorated Carbon Foam Catalyst in a SpinChem® Rotating Bed Reactor
- 2016
-
In: Topics in catalysis. - New York : Springer. - 1022-5528 .- 1572-9028. ; 59:13-14, s. 1165-1177
-
Journal article (peer-reviewed)abstract
- In this work the activity of ruthenium decorated carbon foam (Ru/CF) catalyst was studied in three phase hydrogenation reaction of d-xylose to d-xylitol. The developed catalyst was characterized by using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, inductively coupled plasma optical emission spectrometry and nitrogen adsorption–desorption measurement. Kinetic measurements were carried out in a laboratory scale pressurized reactor (Parr®) assisted by SpinChem® rotating bed reactor (SRBR), at pre-defined conditions (40–60 bar H2 and 100–120 °C). The study on the influence of reaction conditions showed that the conversion rate and selectivity of hydrogenation reaction of d-xylose was significantly affected by temperature. These results have been proved by a competitive kinetics model which was found to describe the behavior of the novel system (Ru/CF catalyst used together with the SRBR) very well. Besides, it was revealed that the catalytic activity as well as the stability of our Ru/CF-SRBR is comparable with the commercial ruthenium decorated carbon catalyst (Ru/AC) under identical reaction conditions. Moreover, all steps from catalyst preparation and catalyst recycling as well as catalytic testing can be performed in an easy, fast and elegant manner without any loss of materials. Briefly, the developed Ru/CF catalyst used together with the SRBR could be used an excellent alternative for the conventional Raney nickel catalyst in a slurry batch reactor and offers an attractive concept with obvious industrial applicability.
|
|
| 47. |
- Ngoc Pham, Tung, et al.
(author)
-
Core–shell carbon nanofibers‐NiFe structure on 3D porous carbon foam : facilitating a promising trajectory toward decarbonizing energy production
- 2022
-
In: Advanced sustainable systems. - : Wiley-VCH Verlagsgesellschaft. - 2366-7486. ; 6:12
-
Journal article (peer-reviewed)abstract
- In this work, a low-cost, light-weight, highly efficient, and durable electrode in which NiFe-layered double hydroxide is electrodeposited on a carbon nanofiber (CNF) core supported on a carbon foam (CF) is introduced. The resulting 3D NiFe-CNFs-CF electrode shows excellent oxygen evolution reaction and hydrogen evolution reaction performance in alkaline media. When used as an anode and a cathode in the same cell, a current density of 10 mA cm−2 is achieved, at a cell voltage of 1.65 V. Moreover, good stability over a long testing time (50 h) is demonstrated. The ternary hybrid electrode gives rise to an excellent performance-to-weight ratio owing to its very low bulk density (≈34 mg cm−3) inherited from super lightweight components composed of CF and CNFs. The developed electrode can potentially be used in large-scale alkaline water electrolysis, in facilities such as offshore hydrogen production platforms, which can complement the variable renewable energy production of wind farms through hydrogen storage and fuel cells.
|
|
| 48. |
- Ngoc Pham, Tung, et al.
(author)
-
Industrially benign super-compressible piezoresistive carbon foams with predefined wetting properties : from environmental to electrical applications
- 2014
-
In: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 4
-
Journal article (peer-reviewed)abstract
- In the present work electrically conductive, flexible, lightweight carbon sponge materials derived from open-pore structure melamine foams are studied and explored. Hydrophobic and hydrophilic surface properties - depending on the chosen treatment conditions - allow the separation and storage of liquid chemical compounds. Activation of the carbonaceous structures substantially increases the specific surface area from ,4 m2 g21 to ,345 m2 g21 , while retaining the original three-dimensional, open-pore structure suitable for hosting, for example, Ni catalyst nanoparticles. In turn the structure is rendered suitable for hydrogenating acetone to 2-propanol and methyl isobutyl ketone as well for growing hierarchical carbon nanotube structures used as electric double-layer capacitor electrodes with specific capacitance of ,40 F/g. Mechanical stress-strain analysis indicates the materials are super-compressible (.70% volume reduction) and viscoelastic with excellent damping behavior (loss of 0.69 6 0.07), while piezoresistive measurements show very high gauge factors (from ,20 to 50) over a large range of deformations. The cost-effective, robust and scalable synthesis - in conjunction with their fascinating multifunctional utility - makes the demonstrated carbon foams remarkable competitors with other three-dimensional carbon materials typically based on pyrolyzed biopolymers or on covalently bonded graphene and carbon nanotube frameworks.
|
|
| 49. |
- Ngoc Pham, Tung, et al.
(author)
-
NiCo Nanoneedles on 3D Carbon Nanotubes/Carbon Foam Electrode as an Efficient Bi-Functional Catalyst for Electro-Oxidation of Water and Methanol
- 2021
-
In: Catalysts. - : MDPI. - 2073-4344. ; 11:4
-
Journal article (peer-reviewed)abstract
- In this study, we report a 3D structured carbon foam electrode assembled from a bi-functional NiCo catalyst, carbon nanotubes (CNT), and a monolith 3D structured carbon foam (CF) as a highly active and stable electrode for oxygen evolution reaction (OER) and methanol oxidation reaction (MOR). When the NiCo@CNTs/CF electrode was used as an anode in OER, after the anodization step, the electrode required a small overpotential of 320 mV to reach the current density of 10 mA cm−2 and demonstrated excellent stability over a long testing time (total 30 h) in 1 M KOH. The as-prepared NiCo@CNTs/CF electrode also exhibited a good performance towards methanol oxidation reaction (MOR) with high current density, 100 mA cm−2 at 0.6 V vs. Ag/AgCl, and good stability in 1 M KOH plus 0.5 M CH3OH electrolyte. The NiCo@CNTs/CF catalyst/electrode provides a potential for application as an anode in water electrolysis and direct methanol fuel cells.
|
|
| 50. |
- Ngoc Pham, Tung, et al.
(author)
-
Robust hierarchical 3D carbon foam electrode for efficient water electrolysis
- 2017
-
In: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Journal article (peer-reviewed)abstract
- Herein we report a 3D heterostructure comprising a hierarchical macroporous carbon foam that incorporates mesoporous carbon nanotubes decorated with cobalt oxide nanoparticles as an unique and highly efficient electrode material for the oxygen evolution reaction (OER) in electrocatalytic water splitting. The best performing electrode material showed high stability after 10 h, at constant potential of 1.7 V vs. RHE (reversible hydrogen electrode) in a 0.1 M KOH solution and high electrocatalytic activity in OER with low overpotential (0.38 V vs RHE at 10 mA cm(-2)). The excellent electrocatalytic performance of the electrode is rationalized by the overall 3D macroporous structure and with the firmly integrated CNTs directly grown on the foam, resulting in a large specific surface area, good electrical conductivity, as well as an efficient electrolyte transport into the whole electrode matrix concurrent with an ability to quickly dispose oxygen bubbles into the electrolyte. The eminent properties of the three-dimensional structured carbon matrix, which can be synthesized through a simple, scalable and cost effective pyrolysis process show that it has potential to be implemented in large-scale water electrolysis systems.
|
|
