1. |
|
|
2. |
- Santoro, V., et al.
(författare)
-
HighNESS conceptual design report: Volume I
- 2024
-
Ingår i: Journal of Neutron Research. - 1023-8166 .- 1477-2655. ; 25:3-4, s. 85-314
-
Tidskriftsartikel (refereegranskat)abstract
- The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world’s most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2–20 Å), very cold (VCN, 10–120 Å), and ultracold (UCN, >500 Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable.
|
|
3. |
- Santoro, V., et al.
(författare)
-
HighNESS conceptual design report: Volume II. the NNBAR experiment.
- 2024
-
Ingår i: Journal of Neutron Research. - 1023-8166 .- 1477-2655. ; 25:3-4, s. 315-406
-
Tidskriftsartikel (refereegranskat)abstract
- A key aim of the HighNESS project for the European Spallation Source is to enable cutting-edge particle physics experiments. This volume presents a conceptual design report for the NNBAR experiment. NNBAR would exploit a new cold lower moderator to make the first search in over thirty years for free neutrons converting to anti-neutrons. The observation of such a baryon-number-violating signature would be of fundamental significance and tackle open questions in modern physics, including the origin of the matter-antimatter asymmetry. This report shows the design of the beamline, supermirror focusing system, magnetic and radiation shielding, and anti-neutron detector necessary for the experiment. A range of simulation programs are employed to quantify the performance of the experiment and show how background can be suppressed. For a search with full background suppression, a sensitivity improvement of three orders of magnitude is expected, as compared with the previous search. Civil engineering studies for the NNBAR beamline are also shown, as is a costing model for the experiment.
|
|
4. |
- Dey, Lankeswar, et al.
(författare)
-
Authenticating the Presence of a Relativistic Massive Black Hole Binary in OJ 287 Using Its General Relativity Centenary Flare : Improved Orbital Parameters
- 2018
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 0004-637X .- 1538-4357. ; 866:1
-
Tidskriftsartikel (refereegranskat)abstract
- Results from regular monitoring of relativistic compact binaries like PSR 1913+16 are consistent with the dominant (quadrupole) order emission of gravitational waves (GWs). We show that observations associated with the binary black hole (BBH) central engine of blazar OJ 287 demand the inclusion of gravitational radiation reaction effects beyond the quadrupolar order. It turns out that even the effects of certain hereditary contributions to GW emission are required to predict impact flare timings of OJ 287. We develop an approach that incorporates this effect into the BBH model for OJ 287. This allows us to demonstrate an excellent agreement between the observed impact flare timings and those predicted from ten orbital cycles of the BBH central engine model. The deduced rate of orbital period decay is nine orders of magnitude higher than the observed rate in PSR 1913+16, demonstrating again the relativistic nature of OJ 287's central engine. Finally, we argue that precise timing of the predicted 2019 impact flare should allow a test of the celebrated black hole no-hair theorem at the 10% level.
|
|
5. |
- Santoro, V., et al.
(författare)
-
The HighNESS Project at the European Spallation Source : Current Status and Future Perspectives
- 2024
-
Ingår i: Nuclear science and engineering. - 0029-5639 .- 1943-748X. ; 198:1, s. 31-63
-
Tidskriftsartikel (refereegranskat)abstract
- The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that, once completed at full specifications, will operate the world's most powerful pulsed neutron source. Supported by a 3 M Euro Research and Innovation Action within the European Union Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source located below the spallation target. Compared to the first source, which is located above the spallation target and designed for high cold and thermal brightness, the new source is being optimized to deliver higher intensity and a shift to longer wavelengths in the spectral regions of cold neutrons (CNs) (2 to 20 & Aring;), very cold neutrons (VCNs) (10 to 120 & Aring;), and ultracold neutrons (UCNs) (> 500 & Aring;). The second source consists of a large liquid deuterium moderator to deliver CNs and serve secondary VCN and UCN sources, for which different options are under study. These new sources will boost several areas of condensed matter research and will provide unique opportunities in fundamental physics. The HighNESS project is now entering its last year, and we are working toward the Conceptual Design Report of the ESS upgrade. In this paper, results obtained in the first 2 years, ongoing developments, and future perspectives are described.
|
|
6. |
- Schweinsberg, Martin, et al.
(författare)
-
Same data, different conclusions : Radical dispersion in empirical results when independent analysts operationalize and test the same hypothesis
- 2021
-
Ingår i: Organizational Behavior and Human Decision Processes. - : Elsevier BV. - 0749-5978 .- 1095-9920. ; 165, s. 228-249
-
Tidskriftsartikel (refereegranskat)abstract
- In this crowdsourced initiative, independent analysts used the same dataset to test two hypotheses regarding the effects of scientists' gender and professional status on verbosity during group meetings. Not only the analytic approach but also the operationalizations of key variables were left unconstrained and up to individual analysts. For instance, analysts could choose to operationalize status as job title, institutional ranking, citation counts, or some combination. To maximize transparency regarding the process by which analytic choices are made, the analysts used a platform we developed called DataExplained to justify both preferred and rejected analytic paths in real time. Analyses lacking sufficient detail, reproducible code, or with statistical errors were excluded, resulting in 29 analyses in the final sample. Researchers reported radically different analyses and dispersed empirical outcomes, in a number of cases obtaining significant effects in opposite directions for the same research question. A Boba multiverse analysis demonstrates that decisions about how to operationalize variables explain variability in outcomes above and beyond statistical choices (e.g., covariates). Subjective researcher decisions play a critical role in driving the reported empirical results, underscoring the need for open data, systematic robustness checks, and transparency regarding both analytic paths taken and not taken. Implications for orga-nizations and leaders, whose decision making relies in part on scientific findings, consulting reports, and internal analyses by data scientists, are discussed.
|
|
7. |
- Hensiek, A E, et al.
(författare)
-
Familial effects on the clinical course of multiple sclerosis.
- 2007
-
Ingår i: Neurology. - : Ovid Technologies (Wolters Kluwer Health). - 1526-632X .- 0028-3878. ; 68:5, s. 376-83
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Familial factors influence susceptibility to multiple sclerosis (MS) but it is unknown whether there are additional effects on the natural history of the disease. METHOD: We evaluated 1,083 families with > or =2 first-degree relatives with MS for concordance of age at onset, clinical course, and disease severity and investigated transmission patterns of these clinical features in affected parent-child pairs. RESULTS: There is concordance for age at onset for all families (correlation coefficient 0.14; p < 0.001), as well as for affected siblings (correlation coefficient 0.15; p < 0.001), and affected parent-child pairs (correlation coefficient 0.12; p = 0.03) when each is evaluated separately. Concordance for year of onset is present among affected siblings (correlation coefficient 0.18; p < 0.001) but not the parent-child group (correlation coefficient 0.08; p = 0.15). The clinical course is similar between siblings (kappa 0.12; p < 0.001) but not affected parents and their children (kappa -0.04; p = 0.09). This influence on the natural history is present in all clinical subgroups of relapsing-remitting, and primary and secondary progressive MS, reflecting a familial effect on episodic and progressive phases of the disease. There is no concordance for disease severity within any of the considered family groups (correlation coefficients: all families analyzed together, 0.02, p = 0.53; affected sibling group, 0.02, p = 0.61; affected parent-child group, 0.02, p = 0.69). Furthermore, there are no apparent transmission patterns of any of the investigated clinical features in affected parent-child pairs and no evidence for anticipation or effects of genetic loading. CONCLUSION: Familial factors do not significantly affect eventual disease severity. However, they increase the probability of a progressive clinical course, either from onset or after a phase of relapsing remitting disease. The familial effect is more likely to reflect genetic than environmental conditions. The results are relevant for counseling patients and have implications for the design of studies seeking to identify factors that influence the natural history of the disease.
|
|
8. |
- Santoro, V., et al.
(författare)
-
DEVELOPMENT OF A HIGH INTENSITY NEUTRON SOURCE AT THE EUROPEAN SPALLATION SOURCE : THE HIGHNESS PROJECT
- 2022
-
Ingår i: Proceedings of the 14th International Topical Meeting on Nuclear Applications of Accelerators, AccApp 2021, Embedded with the 2021 ANS Winter Meeting. - 9780894487842 ; , s. 11-20
-
Konferensbidrag (refereegranskat)abstract
- The European Spallation Source (ESS), presently under construction in Lund, Sweden, is a multidisciplinary international laboratory that will operate the world’s most powerful pulsed neutron source. Supported by a 3M Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) is now underway to develop a second neutron source below the spallation target. Compared to the first source, located above the spallation target and designed for high cold and thermal brightness, the new source will provide higher intensity, and a shift to longer wavelengths in the spectral regions of cold (2-20 Å), very cold (VCN, 10-120 Å), and ultra cold (UCN, > 500 Å) neutrons. The core of the second source will consist of a large liquid deuterium moderator to deliver a high flux of cold neutrons and to serve secondary VCN and UCN sources, for which different options are under study. The features of these new sources will boost several areas of condensed matter research and will provide unique opportunities in fundamental physics. Part of the HighNESS project is also dedicated to the development of future instruments that will make use of the new source and will complement the initial suite of instruments in construction at ESS. The HighNESS project started in October 2020. In this paper, the ongoing developments and the results obtained in the first year are described.
|
|
9. |
- Fenske, J., et al.
(författare)
-
BEER-The Beamline for European Materials Engineering Research at the ESS
- 2016
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 746:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Beamline for European Materials Engineering Research (BEER) will be built at the European Spallation Source (ESS). The diffractometer utilizes the high brilliance of the long-pulse neutron source and offers high instrument flexibility. It includes a novel chopper technique that extracts several short pulses out of the long pulse, leading to substantial intensity gain of up to an order of magnitude compared to pulse shaping methods for materials with high crystal symmetry. This intensity gain is achieved without compromising resolution. Materials of lower crystal symmetry or multi-phase materials will be investigated by additional pulse shaping methods. The different chopper set-ups and advanced beam extracting techniques offer an extremely broad intensity/resolution range. Furthermore, BEER offers an option of simultaneous SANS or imaging measurements without compromising diffraction investigations. This flexibility opens up new possibilities for in-situ experiments studying materials processing and performance under operation conditions. To fulfil this task, advanced sample environments, dedicated to thermo-mechanical processing, are foreseen.
|
|
10. |
|
|
11. |
- Woracek, R., et al.
(författare)
-
The test beamline of the European Spallation Source – Instrumentation development and wavelength frame multiplication
- 2016
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002. ; 839, s. 102-116
-
Tidskriftsartikel (refereegranskat)abstract
- The European Spallation Source (ESS), scheduled to start operation in 2020, is aiming to deliver the most intense neutron beams for experimental research of any facility worldwide. Its long pulse time structure implies significant differences for instrumentation compared to other spallation sources which, in contrast, are all providing short neutron pulses. In order to enable the development of methods and technology adapted to this novel type of source well in advance of the first instruments being constructed at ESS, a test beamline (TBL) was designed and built at the BER II research reactor at Helmholtz-Zentrum Berlin (HZB). Operating the TBL shall provide valuable experience in order to allow for a smooth start of operations at ESS. The beamline is capable of mimicking the ESS pulse structure by a double chopper system and provides variable wavelength resolution as low as 0.5% over a wide wavelength band between 1.6 Å and 10 Å by a dedicated wavelength frame multiplication (WFM) chopper system. WFM is proposed for several ESS instruments to allow for flexible time-of-flight resolution. Hence, ESS will benefit from the TBL which offers unique possibilities for testing methods and components. This article describes the main capabilities of the instrument, its performance as experimentally verified during the commissioning, and its relevance to currently starting ESS instrumentation projects.
|
|
12. |
- Čapek, J., et al.
(författare)
-
The Effect of γ″ and δ Phase Precipitation on the Mechanical Properties of Inconel 718 Manufactured by Selective Laser Melting : An In Situ Neutron Diffraction and Acoustic Emission Study
- 2021
-
Ingår i: JOM. - : Springer. - 1047-4838 .- 1543-1851. ; 73:1, s. 223-232
-
Tidskriftsartikel (refereegranskat)abstract
- The deformation behavior of additively manufactured Alloy 718 in as-built condition and after annealing was studied in situ under tensile loading along the build direction. Pre-characterization by synchrotron X-ray diffraction and electron microscopy revealed a significant amount of γ″ precipitates in the as-built samples, whereas the γ″ phase was entirely consumed and needle-like δ precipitates appeared in the annealed sample. In situ neutron diffraction (ND) and acoustic emission (AE) enabled indirect observation of the role of the precipitates on the mechanical behavior. ND provided information on the load accommodation in the matrix, while AE detected a strong signal from the interaction of dislocations with the δ-phase precipitates during deformation of the annealed samples. The results imply that in the annealed samples the matrix sheds the load to the precipitates, while in the as-built material the matrix bares a significant load. © 2020, The Author(s).
|
|
13. |
- Frandsen, H. L., et al.
(författare)
-
Accelerated creep in solid oxide fuel cell anode supports during reduction
- 2016
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 323, s. 78-89
-
Tidskriftsartikel (refereegranskat)abstract
- To evaluate the reliability of solid oxide fuel cell (SOFC) stacks during operation, the stress field in the stack must be known. During operation the stress field will depend on time as creep processes relax stresses. The creep of reduced Ni-YSZ anode support at operating conditions has been studied previously. In this work a newly discovered creep phenomenon taking place during the reduction is reported. This relaxes stresses at a much higher rate (∼×104) than creep during operation. The phenomenon was studied both in three-point bending and uniaxial tension. Differences between the two measurements could be explained by newly observed stress promoted reduction. Finally, samples exposed to a small tensile stress (∼0.004 MPa) were observed to expand during reduction, which is in contradiction to previous literature. These observations suggest that release of internal residual stresses between the NiO and the YSZ phases occurs during reduction. The accelerated creep should practically eliminate any residual stress in the anode support in an SOFC stack, as has previously been indirectly observed. This phenomenon has to be taken into account both in the production of stacks and in the simulation of the stress field in a stack based on anode supported SOFCs.
|
|
14. |
|
|
15. |
- Neikter, Magnus, 1988-, et al.
(författare)
-
Texture of electron beam melted Ti-6Al-4V measured with neutron diffraction
- 2020
-
Konferensbidrag (refereegranskat)abstract
- Texture in materials is important as it contributes to anisotropy in the bulk mechanical properties. Ti-6Al-4V built with the additive manufacturing process (AM) electron beam melting (EBM) has been found to have anisotropic mechanical properties. Therefore, this work has been performed to investigate the texture variations of EBM built Ti-6Al-4V with neutron time of flight (TOF). For the work, samples were produced with different build geometries off-set by 90 degrees. A cast sample was additionally analyzed to investigate the bulk texture of conventionally manufactured material. Microstructural characterization was performed and the cast material was found to have a coarse colony α microstructure, whereas the EBM built material had a finer basket weave microstructure. Overall, the texture of the EBM built material was found to be weak having an multiple of random distribution (MRD) index of ~1 for the α phase, whilst the cast material possessed more than twice the amount of preferred orientation i.e. MRD 2.51 for the α phase.
|
|
16. |
- Santoro, V, et al.
(författare)
-
Development of high intensity neutron source at the European Spallation Source
- 2020
-
Ingår i: Journal of Neutron Research. - 1023-8166 .- 1477-2655. ; 22:2-3, s. 209-219
-
Tidskriftsartikel (refereegranskat)abstract
- The European Spallation Source being constructed in Lund, Sweden will provide the user community with a neutron source of unprecedented brightness. By 2025, a suite of 15 instruments will be served by a high-brightness moderator system placed above the spallation target. The ESS infrastructure, consisting of the proton linac, the target station, and the instrument halls, allows for implementation of a second source below the spallation target. We propose to develop a second neutron source with a high-intensity moderator able to (1) deliver a larger total cold neutron flux, (2) provide high intensities at longer wavelengths in the spectral regions of Cold (4–10 Å), Very Cold (10–40 Å), and Ultra Cold (several 100 Å) neutrons, as opposed to Thermal and Cold neutrons delivered by the top moderator. Offering both unprecedented brilliance, flux, and spectral range in a single facility, this upgrade will make ESS the most versatile neutron source in the world and will further strengthen the leadership of Europe in neutron science. The new source will boost several areas of condensed matter research such as imaging and spin-echo, and will provide outstanding opportunities in fundamental physics investigations of the laws of nature at a precision unattainable anywhere else. At the heart of the proposed system is a volumetric liquid deuterium moderator. Based on proven technology, its performance will be optimized in a detailed engineering study. This moderator will be complemented by secondary sources to provide intense beams of Very- and Ultra-Cold Neutrons.
|
|
17. |
- Šaroun, J., et al.
(författare)
-
Neutron optics concept for the materials engineering diffractometer at the ESS
- 2016
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 746:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Beamline for European Materials Engineering Research (BEER) has been recently proposed to be built at the European Spallation Source (ESS). The presented concept of neutron delivery optics for this instrument addresses the problems of bi-spectral beam extraction from a small moderator, optimization of neutron guides profile for long-range neutron transport and focusing at the sample under various constraints. They include free space before and after the guides, a narrow guide section with gaps for choppers, closing of direct line of sight and cost reduction by optimization of the guides cross-section and coating. A system of slits and exchangeable focusing optics is proposed in order to match various wavelength resolution options provided by the pulse shaping and modulation choppers, which permits to efficiently trade resolution for intensity in a wide range. Simulated performance characteristics such as brilliance transfer ratio are complemented by the analysis of the histories of "useful" neutrons obtained by back tracing neutrons hitting the sample, which helps to optimize some of the neutron guide parameters such as supermirror coating.
|
|
18. |
- Sikkema, Lisa, et al.
(författare)
-
An integrated cell atlas of the lung in health and disease
- 2023
-
Ingår i: Nature Medicine. - : Springer Nature. - 1078-8956 .- 1546-170X. ; 29:6, s. 1563-1577
-
Tidskriftsartikel (refereegranskat)abstract
- Single-cell technologies have transformed our understanding of human tissues. Yet, studies typically capture only a limited number of donors and disagree on cell type definitions. Integrating many single-cell datasets can address these limitations of individual studies and capture the variability present in the population. Here we present the integrated Human Lung Cell Atlas (HLCA), combining 49 datasets of the human respiratory system into a single atlas spanning over 2.4 million cells from 486 individuals. The HLCA presents a consensus cell type re-annotation with matching marker genes, including annotations of rare and previously undescribed cell types. Leveraging the number and diversity of individuals in the HLCA, we identify gene modules that are associated with demographic covariates such as age, sex and body mass index, as well as gene modules changing expression along the proximal-to-distal axis of the bronchial tree. Mapping new data to the HLCA enables rapid data annotation and interpretation. Using the HLCA as a reference for the study of disease, we identify shared cell states across multiple lung diseases, including SPP1 + profibrotic monocyte-derived macrophages in COVID-19, pulmonary fibrosis and lung carcinoma. Overall, the HLCA serves as an example for the development and use of large-scale, cross-dataset organ atlases within the Human Cell Atlas.
|
|
19. |
- Bus, Magdalena M., et al.
(författare)
-
Mitochondrial DNA analysis of a Viking age mass grave in Sweden
- 2019
-
Ingår i: Forensic Science International. - : Elsevier BV. - 1872-4973 .- 1878-0326. ; 42, s. 268-274
-
Tidskriftsartikel (refereegranskat)abstract
- In 1998, a Viking Age mass grave was discovered and excavated at St. Laurence's churchyard in Sigtuna, Sweden. The excavated bones underwent osteoarchaeological analysis and were assigned to at least 19 individuals. Eleven skeletons showed sharp force trauma from bladed weapons. Mass graves are an unusual finding from this time period, making the burial context extraordinary. To investigate a possible maternal kinship among the individuals, bones and teeth from the skeletal remains were selected for mitochondrial DNA (mtDNA) analysis. Sanger sequencing of short stretches of the hypervariable segments I and II (HVS-I and HVS-II) was performed. A subset of the samples was also analysed by massively parallel sequencing analysis (MPS) of the entire mtDNA genome using the Precision ID mtDNA Whole Genome Panel. A total of 15 unique and three shared mtDNA profiles were obtained. Based on a combination of genetic and archaeological data, we conclude that a minimum of 20 individuals was buried in the mass grave. The majority of the individuals were not maternally related. However, two possible pairs of siblings or mother-child relationships were identified. All individuals were assigned to West Eurasian haplogroups, with a predominance of haplogroup H. Although the remains showed an advanced level of DNA degradation, the combined use of Sanger sequencing and MPS with the Precision ID mtDNA Whole Genome Panel revealed at least partial mtDNA data for all samples.
|
|
20. |
- Čapek, J., et al.
(författare)
-
Influence of laser powder bed fusion scanning pattern on residual stress and microstructure of alloy 718
- 2022
-
Ingår i: Materials & design. - : Elsevier Ltd. - 0264-1275 .- 1873-4197. ; 221
-
Tidskriftsartikel (refereegranskat)abstract
- A comprehensive investigation is undertaken on the effect of laser scanning pattern on the microstructure of cylindrical samples made of Alloy 718 processed by Laser Powder Bed Fusion. It is observed that the common alternate direction scanning of the laser results in a more homogeneous microstructure than the less common concentric line scans where significant microstructural heterogeneities are seen between the edges and the center of the sample. The investigation focuses on the precipitation, crystallographic texture, grain size, grain morphology and residual stresses utilizing synchrotron X-ray diffraction, neutron diffraction and electron microscopy. The heterogeneous microstructure of the sample processed with the concentric laser pattern influences the chemical composition of the matrix, which alters the reference “strain free” interplanar spacing used for evaluating the residual strain. The investigation underlines the significance of the processing parameters on the homogeneity of the microstructure and the effect of the chemical variations on the determination of residual stresses in materials such as Alloy 718, where strong local chemical variations occur because of different types and extent of precipitation. © 2022
|
|
21. |
- Cereser, Alberto, et al.
(författare)
-
Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The physical properties of polycrystalline materials depend on their microstructure, which is the nano- to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF 3DND). Compared to existing analogous X-ray diffraction techniques, ToF 3DND enables studies of samples that can be both larger in size and made of heavier elements. Moreover, ToF 3DND facilitates the use of complicated sample environments. The basic ToF 3DND setup, utilizing an imaging detector with high spatial and temporal resolution, can easily be implemented at a time-of-flight neutron beamline. The technique was developed and tested with data collected at the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Complex (J-PARC) for an iron sample. We successfully reconstructed the shape of 108 grains and developed an indexing procedure. The reconstruction algorithms have been validated by reconstructing two stacked Co-Ni-Ga single crystals, and by comparison with a grain map obtained by post-mortem electron backscatter diffraction (EBSD).
|
|
22. |
- Garvey, C. J., et al.
(författare)
-
Small angle neutron scattering on an absolute intensity scale and the internal surface of diatom frustules from three species of differing morphologies
- 2013
-
Ingår i: European Biophysics Journal. - : Springer Science and Business Media LLC. - 0175-7571 .- 1432-1017. ; 42:5, s. 395-404
-
Tidskriftsartikel (refereegranskat)abstract
- The internal nanostructure of the diatoms Cyclotella meneghiniana, Seminavis robusta and Achnanthes subsessilis was investigated using small angle neutron scattering (SANS) to examine thin biosilica samples, consisting of isotropic (powder) from their isolated cell walls. The interpretation of SANS data was assisted by several other measurements. The N-2 adsorption, interpreted within the Branuer-Emmet-Teller isotherm, yielded the specific surface area of the material. Fourier transform infrared (FTIR) and Raman spectroscopy indicates that the isolated material is amorphous silica with small amounts of organic cell wall materials acting as a filling material between the silica particles. A two-phase (air and amorphous silica) model was used to interpret small angle neutron scattering data. After correction for instrumental resolution, the measurements on two SANS instruments covered an extended range of scattering vectors 0.0011 nm(-1) < q < 5.6 nm(-1), giving an almost continuous SANS curve over a range of scattering vectors, q, on an absolute scale of intensity for each sample. Each of the samples gave a characteristic scattering curve where log (intensity) versus log (q) has a -4 dependence, with other features superimposed. In the high-q regime, departure from this behaviour was observed at a length-scales equivalent to the proposed unitary silica particle. The limiting Porod scattering law was used to determine the specific area per unit of volume of each sample illuminated by the neutron beam. The Porod behaviour, and divergence from this behaviour, is discussed in terms of various structural features and the proposed mechanisms for the bio-assembly of unitary silica particles in frustules.
|
|
23. |
|
|
24. |
- Maimaitiyili, Tuerdi, et al.
(författare)
-
Fracture mechanical studies of additive manufactured Ti6Al4V by synchrotron X-ray diffraction
- 2017
-
Ingår i: ICF 2017 - 14th International Conference on Fracture, Vol 1. - : International Conference on Fracture. - 9781510878488 ; , s. 253-254
-
Konferensbidrag (refereegranskat)abstract
- Better understanding of the formation and distribution of hydrides, elastic and plastic strains in deformed polycrystalline, multiphase materials such as digitally manufactured Ti-6Al-4V is important for structural engineering. Polycrystalline Ti-6Al4V alloy samples produced by additive manufacturing techniques called electron beam melting (EBM) have been studied at third generation, high energy synchrotron X-Ray diffraction beam line with energy dispersive X-Ray diffraction setup. The elastic strain in the as built and hydrogenated material determined by extracting unit cell parameters of the existing phases in the system by using whole pattern analysis method Rietveld and Pawley. © 2017 ICF 2017 - 14th International Conference on Fracture. All rights reserved.
|
|
25. |
- Makowska, Małgorzata, et al.
(författare)
-
Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere.
- 2015
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 86:12
-
Tidskriftsartikel (refereegranskat)abstract
- High material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. This paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 °C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition, examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. This covers a broad field of research from fundamental to technological investigations of various types of materials and components.
|
|
26. |
- Makowska, Malgorzata G., et al.
(författare)
-
Effect of stress on NiO reduction in solid oxide fuel cells: a new application of energy-resolved neutron imaging
- 2015
-
Ingår i: Journal of Applied Crystallography. - 1600-5767. ; 48, s. 401-408
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, two new phenomena linking stress field and reduction rates in anode-supported solid oxide fuel cells (SOFCs) have been demonstrated, so-called accelerated creep during reduction and reduction rate enhancement and nucleation due to stress (Frandsen et al., 2014). These complex phenomena are difficult to study and it is demonstrated here that energy-resolved neutron imaging is a feasible technique for combined mechanics-chemical composition studies of SOFC components, including commercially produced ones. Cermet anode supports, which prior to the measurements were reduced under varying conditions such as different temperatures, various times and different values of applied stress, have been measured. Thus, samples with different contents (and gradients) of Ni and NiO phases were investigated. The first Bragg edge transmission neutron measurements applied for the studies of the reduction progress in these samples were performed at two neutron beamline facilities (ISIS in the UK, Helmholtz Zentrum Berlin in Germany). The obtained results demonstrate the possibility to image and distinguish NiO and Ni phases within SOFC anode supports by energy-resolved neutron imaging and the potential of the neutron imaging method for in situ studies of reduction processes.
|
|
27. |
- Makowska, Malgorzata G., et al.
(författare)
-
In situ time-of-flight neutron imaging of NiO-YSZ anode support reduction under influence of stress
- 2016
-
Ingår i: Journal of Applied Crystallography. - 0021-8898. ; 49:5, s. 1674-1681
-
Tidskriftsartikel (refereegranskat)abstract
- This article reports on in situ macroscopic scale imaging of NiO-YSZ (YSZ is yttria-stabilized zirconia) reduction under applied stress - a phase transition taking place in solid oxide electrochemical cells in a reducing atmosphere of a hydrogen/nitrogen mixture and at operation temperatures of up to 1073K. This process is critical for the performance and lifetime of the cells. Energy-resolved neutron imaging was applied to observe the phase transition directly with time and spatial resolution. Two different approaches are presented for using this imaging technique for the investigation of chemical and physical processes requiring controlled atmosphere and elevated temperature. The first type of measurement is based on alternating stages of short-term partial chemical reaction and longer neutron image acquisition, and the second type is a real in situ neutron imaging experiment. Results of applying energy-resolved neutron imaging with both approaches to the NiO-YSZ reduction investigation indicate enhancement of the reduction rate due to applied stress, which is consistent with the results of the authors' previous research.Results of the first in situ energy-resolved neutron imaging of NiO-YSZ (YSZ is yttria-stabilized zirconia) reduction under applied stress are presented. Neutron experiments were performed at the pulsed neutron source ISIS (UK) using a time-of-flight approach.
|
|
28. |
- Neikter, Magnus, 1988-, et al.
(författare)
-
Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction
- 2018
-
Ingår i: Additive Manufacturing. - : Elsevier. - 2214-8604 .- 2214-7810. ; 23, s. 225-234
-
Tidskriftsartikel (refereegranskat)abstract
- Variation of texture in Ti-6Al-4V samples produced by three different additive manufacturing (AM) processes has been studied by neutron time-of-flight (TOF) diffraction. The investigated AM processes were electron beam melting (EBM), selective laser melting (SLM) and laser metal wire deposition (LMwD). Additionally, for the LMwD material separate measurements were done on samples from the top and bottom pieces in order to detect potential texture variations between areas close to and distant from the supporting substrate in the manufacturing process. Electron backscattered diffraction (EBSD) was also performed on material parallel and perpendicular to the build direction to characterize the microstructure. Understanding the context of texture for AM processes is of significant relevance as texture can be linked to anisotropic mechanical behavior. It was found that LMwD had the strongest texture while the two powder bed fusion (PBF) processes EBM and SLM displayed comparatively weaker texture. The texture of EBM and SLM was of the same order of magnitude. These results correlate well with previous microstructural studies. Additionally, texture variations were found in the LMwD sample, where the part closest to the substrate featured stronger texture than the corresponding top part. The crystal direction of the α phase with the strongest texture component was [112¯3]. © 2018 Elsevier B.V.
|
|
29. |
- Nekrassov, D., et al.
(författare)
-
Design of a horizontal neutron reflectometer for the European Spallation Source
- 2014
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 755, s. 85-96
-
Tidskriftsartikel (refereegranskat)abstract
- A design study of a horizontal neutron reflectometer adapted to the general baseline of the long pulse European Spallation Source (ESS) is presented. The instrument layout comprises advanced solutions for the neutron guide, high-resolution pulse shaping and beam bending onto a sample surface being thoroughly adjusted to the properties of the ESS. The length of this instrument is roughly 55 m, enabling delta lambda/lambda resolutions from 0.5% to 10%. The incident beam is focused in horizontal plane to boost measurements of sample sizes of 1 X 1 cm(2) and smaller with potential beam deflection in both downward and upward directions. The primary range of neutron wavelengths utilized by the instrument is 2-7.1 angstrom. If the wavelength range needs to be extended, then this is possible by utilizing only every second (third, fourth) pulse by suppressing all other pulses by the chopper system and thus increase the longest usable wavelength to 12.2 (17.3, 22.4) angstrom. Angles of incidence can be set between 0 degrees and 9 degrees with a total accessible q-range from 4 X 10(-3) angstrom(-1) up to 1 angstrom(-1), while the delta theta/theta resolution can be freely set. The instrument operates in both theta/theta (free liquid surfaces) and theta/2 theta (solid-liquid, air-solid interfaces) geometries. The experimental setup will in particular enable direct studies on ultrathin films (d approximate to 10 angstrom) and buried monolayers to multilayered structures of up to 3000 angstrom total thickness. The horizontal reflectometer will further foster investigations of hierarchical systems from nanometer to micrometer length scale (the latter by off-specular scattering), as well as their kinetics and dynamical properties, in particular under load (shear, pressure, external fields). Polarization and polarization analysis as well as the GISANS option are designed as potential modules to be implemented in the generic instrument layout. The instrument is highly flexible and offers a variety of different measurement modes. With respect to its mechanical components the instrument is exclusively based on current technology. Risks of failure for the chosen setup are minimum. (C) 2014 Elsevier B.V. All rights reserved.
|
|
30. |
- Pfeiler, Georg, et al.
(författare)
-
Impact of BMI in Patients With Early Hormone Receptor-Positive Breast Cancer Receiving Endocrine Therapy With or Without Palbociclib in the PALLAS Trial
- 2023
-
Ingår i: JOURNAL OF CLINICAL ONCOLOGY. - 0732-183X .- 1527-7755. ; 41:33
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSEBMI affects breast cancer risk and prognosis. In contrast to cytotoxic chemotherapy, CDK4/6 inhibitors are given at a fixed dose, irrespective of BMI or weight. This preplanned analysis of the global randomized PALLAS trial investigates the impact of BMI on the side-effect profile, treatment adherence, and efficacy of palbociclib.METHODSPatients were categorized at baseline according to WHO BMI categories. Neutropenia rates were assessed with univariable and multivariable logistic regression. Time to early discontinuation of palbociclib was analyzed with Fine and Gray competing risk models. Unstratified Cox models were used to investigate the association between BMI category and time to invasive disease-free survival (iDFS). 95% CIs were derived.RESULTSOf 5,698 patients included in this analysis, 68 (1.2%) were underweight, 2,082 (36.5%) normal weight, 1,818 (31.9%) overweight, and 1,730 (30.4%) obese at baseline. In the palbociclib arm, higher BMI was associated with a significant decrease in neutropenia (unadjusted odds ratio for 1-unit change, 0.93; 95% CI, 0.91 to 0.94; adjusted for age, race ethnicity, region, chemotherapy use, and Eastern Cooperative Oncology Group at baseline, 0.93; 95% CI, 0.92 to 0.95). This translated into a significant decrease in treatment discontinuation rate with higher BMI (adjusted hazard ratio [HR] for 10-unit change, 0.75; 95% CI, 0.67 to 0.83). There was no significant improvement in iDFS with the addition of palbociclib to ET in any weight category (normal weight HR, 0.84; 95% CI, 0.63 to 1.12; overweight HR, 1.10; 95% CI, 0.82 to 1.49; and obese HR, 0.95; 95% CI, 0.69 to 1.30) in this analysis early in follow-up (31 months).CONCLUSIONThis preplanned analysis of the PALLAS trial demonstrates a significant impact of BMI on side effects, dose reductions, early treatment discontinuation, and relative dose intensity. Additional long-term follow-up will further evaluate whether BMI ultimately affects outcome. This preplanned analysis of the PALLAS trial demonstrates a significant impact of BMI on side effects, dose reductions, early treatment discontinuation, and relative dose intensity.
|
|
31. |
- Strobl, Christina, et al.
(författare)
-
Evaluation of the precision ID whole MtDNA genome panel for forensic analyses
- 2018
-
Ingår i: Forensic Science International. - : Elsevier BV. - 1872-4973 .- 1878-0326. ; 35, s. 21-25
-
Tidskriftsartikel (refereegranskat)abstract
- Mitochondrial DNA (mtDNA) amplification and Massively Parallel Sequencing (MPS) using an early access version of the Precision ID Whole MtDNA Genome Panel (Thermo Fisher Scientific) and the Ion Personal Genome Machine (PGM) were evaluated using 15 forensically relevant samples. Samples were selected to represent typical forensic specimens for mtDNA analysis including hairs, hair shafts, swabs and ancient solid tissue samples (bones and teeth) that were stored in the freezer for up to several years after having been typed with conventional Sanger-type Sequencing and Capillary Electrophoresis. The MPS haplotypes confirmed the earlier results in all samples and provided additional sequence information that improved discrimination power and haplogroup estimation. The results raised the appetite for further experiments to validate and apply the new technology in forensic practice.
|
|
32. |
|
|
33. |
- Strobl, Markus, et al.
(författare)
-
The wavelength frame multiplication chopper system for the ESS test beamline at the BER II reactor-A concept study of a fundamental ESS instrument principle
- 2013
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 705, s. 74-84
-
Tidskriftsartikel (refereegranskat)abstract
- Contributing to the design update phase of the European Spallation Source ESS-scheduled to start operation in 2019-a test beamline is under construction at the BER II research reactor at Helmholtz Zentrum Berlin (HZB). This beamline offers experimental test capabilities of instrument concepts viable for the ESS. The experiments envisaged at this dedicated beamline comprise testing of components as well as of novel experimental approaches and methods taking advantage of the long pulse characteristic of the ESS source. Therefore the test beamline will be equipped with a sophisticated chopper system that provides the specific time structure of the ESS and enables variable wavelength resolutions via wavelength frame multiplication (WFM), a fundamental instrument concept beneficial for a number of instruments at ESS. We describe the unique chopper system developed for these purposes, which allows constant wavelength resolution for a wide wavelength band. Furthermore we discuss the implications for the conceptual design for related instrumentation at the ESS. (C) 2012 Elsevier B.V. All rights reserved.
|
|
34. |
- Tremsin, A. S., et al.
(författare)
-
Imaging of dynamic magnetic fields with spin-polarized neutron beams
- 2015
-
Ingår i: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 17
-
Tidskriftsartikel (refereegranskat)abstract
- Precession of neutron spin in a magnetic field can be used for mapping of a magnetic field distribution, as demonstrated previously for static magnetic fields at neutron beamline facilities. The fringing in the observed neutron images depends on both the magnetic field strength and the neutron energy. In this paper we demonstrate the feasibility of imaging periodic dynamic magnetic fields using a spin-polarized cold neutron beam. Our position-sensitive neutron counting detector, providing with high precision both the arrival time and position for each detected neutron, enables simultaneous imaging of multiple phases of a periodic dynamic process with microsecond timing resolution. The magnetic fields produced by 5- and 15-loop solenoid coils of 1 cm diameter, are imaged in our experiments with similar to 100 mu m resolution for both dc and 3 kHz ac currents. Our measurements agree well with theoretical predictions of fringe patterns formed by neutron spin precession. We also discuss the wavelength dependence and magnetic field quantification options using a pulsed neutron beamline. The ability to remotely map dynamic magnetic fields combined with the unique capability of neutrons to penetrate various materials (e.g., metals), enables studies of fast periodically changing magnetic processes, such as formation of magnetic domains within metals due to the presence of ac magnetic fields.
|
|