| 1. |
- Shi, Ziyi, et al.
(author)
-
Bio-based anode material production for lithium–ion batteries through catalytic graphitization of biochar : the deployment of hybrid catalysts
- 2024
-
In: Scientific Reports. - : Springer Nature. - 2045-2322. ; 14:1
-
Journal article (peer-reviewed)abstract
- Producing sustainable anode materials for lithium-ion batteries (LIBs) through catalytic graphitization of renewable biomass has gained significant attention. However, the technology is in its early stages due to the bio-graphite's comparatively low electrochemical performance in LIBs. This study aims to develop a process for producing LIB anode materials using a hybrid catalyst to enhance battery performance, along with readily available market biochar as the raw material. Results indicate that a trimetallic hybrid catalyst (Ni, Fe, and Mn in a 1:1:1 ratio) is superior to single or bimetallic catalysts in converting biochar to bio-graphite. The bio-graphite produced under this catalyst exhibits an 89.28% degree of graphitization and a 73.95% conversion rate. High-resolution transmission electron microscopy (HRTEM) reveals the dissolution–precipitation mechanism involved in catalytic graphitization. Electrochemical performance evaluation showed that the trimetallic hybrid catalyst yielded bio-graphite with better electrochemical performances than those obtained through single or bimetallic hybrid catalysts, including a good reversible capacity of about 293 mAh g−1 at a current density of 20 mA/g and a stable cycle performance with a capacity retention of over 98% after 100 cycles. This study proves the synergistic efficacy of different metals in catalytic graphitization, impacting both graphite crystalline structure and electrochemical performance.
|
|
| 2. |
- Subasi, Yaprak, et al.
(author)
-
Surface modified TiO2/reduced graphite oxide nanocomposite anodes for lithium ion batteries
- 2020
-
In: Journal of Solid State Electrochemistry. - : Springer Science and Business Media LLC. - 1432-8488 .- 1433-0768. ; 24:5, s. 1085-1093
-
Journal article (peer-reviewed)abstract
- Anatase TiO2 nanoparticles with an average crystallite size of ~ 20 nm are synthesized through a sol-gel method. A composite anode for Li-ion batteries is prepared with the synthesized TiO2 nanoparticles and reduced graphite oxide (RGO) as the conductive carbon source. After the preparation of TiO2/RGO nanocomposite, a novel surface modification is carried out by the employment of H2O2 to enhance the overall electrochemical performance of nanocomposite anode (TiO2/RGO-P composite). The physical and chemical characterizations of the surface modified TiO2/RGO-P composites are performed with X-ray powder diffraction (XRPD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and atomic force microscopy (AFM) analyses. The electrochemical performance of TiO2/RGO-P composite electrodes is investigated via galvanostatic charge-discharge cycling tests in a potential window of 1.0-3.0 V. Compared to the plain TiO2/RGO composite anode, the TiO2/RGO-P composite anode has higher reversible capacities and better cycling performance due to the enhanced and stable formation of 3D channels of TiO2 nanoparticles with RGO stemming from the surface modification with H2O2. The TiO2/RGO-P composite anode delivers reversible discharge capacities around 291 mA h g(-1) at a rate of 100 mA g(-1), whereas the value stays at 214 and 143 mA h g(-1) for the plain TiO2/RGO composite and TiO2 nanoparticle without any RGO, respectively.
|
|
| 3. |
- Yang, Hanmin, 1992-, et al.
(author)
-
Distributed electrified heating for efficient hydrogen production
- 2024
-
In: Nature Communications. - : Nature Research. - 2041-1723. ; 15:1
-
Journal article (peer-reviewed)abstract
- This study introduces a distributed electrified heating approach that is able to innovate chemical engineering involving endothermic reactions. It enables rapid and uniform heating of gaseous reactants, facilitating efficient conversion and high product selectivity at specific equilibrium. Demonstrated in catalyst-free CH4 pyrolysis, this approach achieves stable production of H2 (530 g h−1 L reactor−1) and carbon nanotube/fibers through 100% conversion of high-throughput CH4 at 1150 °C, surpassing the results obtained from many complex metal catalysts and high-temperature technologies. Additionally, in catalytic CH4 dry reforming, the distributed electrified heating using metallic monolith with unmodified Ni/MgO catalyst washcoat showcased excellent CH4 and CO2 conversion rates, and syngas production capacity. This innovative heating approach eliminates the need for elongated reactor tubes and external furnaces, promising an energy-concentrated and ultra-compact reactor design significantly smaller than traditional industrial systems, marking a significant advance towards more sustainable and efficient chemical engineering society.
|
|
| 4. |
- Yang, Hanmin, 1992-, et al.
(author)
-
Distributed electrified heating for efficient hydrogen production
- 2024
-
In: Nature Communications. - : Nature Research. - 2041-1723. ; 15
-
Journal article (peer-reviewed)abstract
- This study introduces a distributed electrified heating approach that is able to innovate chemical engineering involving endothermic reactions. It enables rapid and uniform heating of gaseous reactants, facilitating efficient conversion and high product selectivity at specific equilibrium. Demonstrated in catalyst-free CH4 pyrolysis, this approach achieves stable production of H2 (530 g h−1 L reactor−1) and carbon nanotube/fibers through 100% conversion of high-throughput CH4 at 1150 °C, surpassing the results obtained from many complex metal catalysts and high-temperature technologies. Additionally, in catalytic CH4 dry reforming, the distributed electrified heating using metallic monolith with unmodified Ni/MgO catalyst washcoat showcased excellent CH4 and CO2 conversion rates, and syngas production capacity. This innovative heating approach eliminates the need for elongated reactor tubes and external furnaces, promising an energy-concentrated and ultra-compact reactor design significantly smaller than traditional industrial systems, marking a significant advance towards more sustainable and efficient chemical engineering society.
|
|
