1. |
|
|
2. |
|
|
3. |
- Thomas, HS, et al.
(författare)
-
- 2019
-
swepub:Mat__t
|
|
4. |
- Glasbey, JC, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
5. |
|
|
6. |
|
|
7. |
- Busca, A, et al.
(författare)
-
Outcome of COVID-19 in allogeneic stem cell transplant recipients: Results from the EPICOVIDEHA registry
- 2023
-
Ingår i: Frontiers in immunology. - : Frontiers Media SA. - 1664-3224. ; 14, s. 1125030-
-
Tidskriftsartikel (refereegranskat)abstract
- The outcome of COVID-19 in allogeneic hematopoietic stem cell transplantation (HSCT) recipients is almost uniformely considered poor. The aim of present study was to retrospectively analyse the outcome and risk factors for mortality in a large series of patients who developed COVID-19 infection after an allogeneic HSCT.MethodsThis multicenter retrospective study promoted by the European Hematology Association – Infections in Hematology Study Working Group, included 326 adult HSCT patients who had COVID-19 between January 2020 and March 2022.ResultsThe median time from HSCT to the diagnosis of COVID-19 was 268 days (IQR 86-713; range 0-185 days). COVID-19 severity was mild in 21% of the patients, severe in 39% and critical in 16% of the patients. In multivariable analysis factors associated with a higher risk of mortality were, age above 50 years, presence of 3 or more comorbidities, active hematologic disease at time of COVID-19 infection, development of COVID-19 within 12 months of HSCT, and severe/critical infections. Overall mortality rate was 21% (n=68): COVID-19 was the main or secondary cause of death in 16% of the patients (n=53).ConclusionsMortality in HSCT recipients who develop COVID-19 is high and largely dependent on age, comorbidities, active hematologic disease, timing from transplant and severity of the infection.
|
|
8. |
|
|
9. |
- Ademuyiwa, Adesoji O., et al.
(författare)
-
Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries
- 2016
-
Ingår i: BMJ Global Health. - : BMJ Publishing Group Ltd. - 2059-7908. ; 1:4
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally.Methods: Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression.Results: This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed.Conclusions: Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas.
|
|
10. |
|
|
11. |
|
|
12. |
- Dengler, Juergen, et al.
(författare)
-
GrassPlot - a database of multi-scale plant diversity in Palaearctic grasslands
- 2018
-
Ingår i: Phytocoenologia. - : Schweizerbart. - 0340-269X. ; 48:3, s. 331-347
-
Tidskriftsartikel (refereegranskat)abstract
- GrassPlot is a collaborative vegetation-plot database organised by the Eurasian Dry Grassland Group (EDGG) and listed in the Global Index of Vegetation-Plot Databases (GIVD ID EU-00-003). GrassPlot collects plot records (releves) from grasslands and other open habitats of the Palaearctic biogeographic realm. It focuses on precisely delimited plots of eight standard grain sizes (0.0001; 0.001;... 1,000 m(2)) and on nested-plot series with at least four different grain sizes. The usage of GrassPlot is regulated through Bylaws that intend to balance the interests of data contributors and data users. The current version (v. 1.00) contains data for approximately 170,000 plots of different sizes and 2,800 nested-plot series. The key components are richness data and metadata. However, most included datasets also encompass compositional data. About 14,000 plots have near-complete records of terricolous bryophytes and lichens in addition to vascular plants. At present, GrassPlot contains data from 36 countries throughout the Palaearctic, spread across elevational gradients and major grassland types. GrassPlot with its multi-scale and multi-taxon focus complements the larger international vegetationplot databases, such as the European Vegetation Archive (EVA) and the global database " sPlot". Its main aim is to facilitate studies on the scale-and taxon-dependency of biodiversity patterns and drivers along macroecological gradients. GrassPlot is a dynamic database and will expand through new data collection coordinated by the elected Governing Board. We invite researchers with suitable data to join GrassPlot. Researchers with project ideas addressable with GrassPlot data are welcome to submit proposals to the Governing Board.
|
|
13. |
- Gulbrandsen, Torea A., et al.
(författare)
-
Extracting hemicelluloses from softwood and bagasse as oligosaccharides using pure water and microwave heating
- 2015
-
Ingår i: Cellulose Chemistry and Technology. - : Editura Academiei Romane. - 0576-9787. ; 49:2, s. 117-126
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of the study was to identify conditions for hemicelluloses extraction in oligomeric form. Using microwave assisted hot water extraction (HWE), the effects of both retention time and temperature on hemicelluloses yields, as well as the degree of polymerization (DP) as analyzed by SEC-MALLS, were investigated using both softwood (sawmill shavings) and sugarcane bagasse. The results are discussed in the light of the unavoidable yield-DP compromise resulting from the application of batch mode operations. Nevertheless, significant differences between the two raw materials could be observed, as expected. For softwood shavings, data interpolation indicated that about 50% of the hemicelluloses could be obtained as oligomers at an average DP of 30 when extracted at 183 °C for 5 minutes. For bagasse, longer extraction times seemed optimal. After hot water extraction at 183 °C for 12 minutes, about 62% of the bagasse hemicelluloses were extracted as oligomers at an average DP of about 100.
|
|
14. |
|
|
15. |
- Opedal, Mihaela Tanase, et al.
(författare)
-
Lignin : A biopolymer from forestry biomass for biocomposites and 3D printing
- 2019
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 12:18
-
Tidskriftsartikel (refereegranskat)abstract
- Biopolymers from forestry biomass are promising for the sustainable development of new biobased materials. As such, lignin and fiber-based biocomposites are plausible renewable alternatives to petrochemical-based products. In this study, we have obtained lignin from Spruce biomass through a soda pulping process. The lignin was used for manufacturing biocomposite filaments containing 20% and 40% lignin and using polylactic acid (PLA) as matrix material. Dogbones for mechanical testing were 3D printed by fused deposition modelling. The lignin and the corresponding biocomposites were characterized in detail, including thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis (XRD), antioxidant capacity, mechanical properties, and scanning electron microscopy (SEM). Although lignin led to a reduction of the tensile strength and modulus, the reduction could be counteracted to some extent by adjusting the 3D printing temperature. The results showed that lignin acted as a nucleating agent and thus led to further crystallization of PLA. The radical scavenging activity of the biocomposites increased to roughly 50% antioxidant potential/cm2, for the biocomposite containing 40 wt % lignin. The results demonstrate the potential of lignin as a component in biocomposite materials, which we show are adequate for 3D printing operations. © 2019 by the authors.
|
|
16. |
- Rost, Hakon, I, et al.
(författare)
-
A Simplified Method for Patterning Graphene on Dielectric Layers
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:31, s. 37500-37506
-
Tidskriftsartikel (refereegranskat)abstract
- The large-scale formation of patterned, quasi-freestanding graphene structures supported on a dielectric has so far been limited by the need to transfer the graphene onto a suitable substrate and contamination from the associated processing steps. We report mu m scale, few-layer graphene structures formed at moderate temperatures (600-700 degrees C) and supported directly on an interfacial dielectric formed by oxidizing Si layers at the graphene/substrate interface. We show that the thickness of this underlying dielectric support can be tailored further by an additional Si intercalation of the graphene prior to oxidation. This produces quasi-freestanding, patterned graphene on dielectric SiO2 with a tunable thickness on demand, thus facilitating a new pathway to integrated graphene microelectronics.
|
|
17. |
|
|