1. |
- Chen, Q., et al.
(author)
-
Biopolymer-Templated Deposition of Ordered and Polymorph Titanium Dioxide Thin Films for Improved Surface-Enhanced Raman Scattering Sensitivity
- 2022
-
In: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 32:6
-
Journal article (peer-reviewed)abstract
- Titanium dioxide (TiO2) is an excellent candidate material for semiconductor metal oxide-based substrates for surface-enhanced Raman scattering (SERS). Biotemplated fabrication of TiO2 thin films with a 3D network is a promising route for effectively transferring the morphology and ordering of the template into the TiO2 layer. The control over the crystallinity of TiO2 remains a challenge due to the low thermal stability of biopolymers. Here is reported a novel strategy of the cellulose nanofibril (CNF)-directed assembly of TiO2/CNF thin films with tailored morphology and crystallinity as SERS substrates. Polymorphous TiO2/CNF thin films with well-defined morphology are obtained by combining atomic layer deposition and thermal annealing. A high enhancement factor of 1.79 × 106 in terms of semiconductor metal oxide nanomaterial (SMON)-based SERS substrates is obtained from the annealed TiO2/CNF thin films with a TiO2 layer thickness of 10 nm fabricated on indium tin oxide (ITO), when probed by 4-mercaptobenzoic acid molecules. Common SERS probes down to 10 nm can be detected on these TiO2/CNF substrates, indicating superior sensitivity of TiO2/CNF thin films among SMON SERS substrates. This improvement in SERS sensitivity is realized through a cooperative modulation of the template morphology of the CNF network and the crystalline state of TiO2.
|
|
2. |
- Chen, Q., et al.
(author)
-
Cellulose-Reinforced Programmable and Stretch-Healable Actuators for Smart Packaging
- 2022
-
In: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 32:49, s. 2208074-
-
Journal article (peer-reviewed)abstract
- Biomimetic actuators are promising candidates for smart soft robotics. The applications of state-of-the-art actuators require the combination of programmable stimuli-responsiveness, excellent robustness, and efficient self-healing ability in a wide-range of working conditions. However, these properties may be mutually exclusive. Inspired by biological tissues, two kinds of polyelectrolytes including polyvinyl alcohol (PVA) and polystyrene sulfonate (PSS) are exploited as the fillers of cellulose nanofibrils (CNFs) for the fabrication of the CNF/PVA/PSS (CAS) film via the assembly of the physically-crosslinked network through multiple H-bonding and electrostatic interactions. Achieved by a casting-evaporation strategy, internal stress is stored within the polymer matrix and transforms into reversible anisotropic bending deformations in response to a humidity gradient. The speed, direction, and pitch of the bending can be programmed by tailoring the internal stresses and geometry of the samples. Moreover, the H-bonded network also contributes to the effective energy dissipation toward high toughness during tensile stretching, as well as self-healing ability during moisture saturation of the CAS films. This enables the fabrication of a humidity-sensitive flower-shaped actuator and self-healable packaging paper. This study presents a biomimetic strategy for the fabrication of multi-functional soft robotics, which holds great promise for applications in the fields of biosensors and smart packaging.
|
|
3. |
- Enculecu, I., et al.
(author)
-
Current perpendicular to plane single-nanowire GMR sensor
- 2007
-
In: Applied Physics A. - : Springer Science and Business Media LLC. - 0947-8396 .- 1432-0630. ; 86:1, s. 43-47
-
Journal article (peer-reviewed)abstract
- By electrochemical deposition in a single nanopore membrane we fabricate Cu/Co layered single nanowires, that exhibit up to 10% magnetoresistance at room temperature. Single nanopore membranes are prepared by irradiating polycarbonate membranes with exactly one swift heavy ion, and by subsequent chemical etching of the single ion track. Both dc and pulsed electrodeposition of single wires consisting of Cu-Co alloy and Cu/Co multilayers respectively, are performed from a bath containing the two metal ions. By sputtering a gold electrode on the upper membrane surface, the single nanowire embedded in the flexible polymer foil is reliably contacted. While alloy wires exhibit anisotropic magnetoresistance (AMR), multilayer wires display current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) behavior. This demonstrates that both the fabrication and contacting methods are very suitable for the investigation of transport properties, without the necessity of lithographic processes and without manipulation of the nanowires. In addition, the method opens up many new possibilities for single nanowire-based sensors.
|
|
4. |
|
|
5. |
|
|