1. |
- Dresen, Dominique, et al.
(author)
-
Neither Sphere nor Cube-Analyzing the Particle Shape Using Small-Angle Scattering and the Superball Model
- 2021
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 125:42, s. 23356-23363
-
Journal article (peer-reviewed)abstract
- Accurate characterization of the nanocrystal shape with high statistical relevance is essential for exploiting the strongly shapedependent properties of cuboidal nanoparticles toward applications. This work presents the development of a new small-angle scattering form factor based on the superball geometry. The superball quantifies the characteristic rounding of corners and edges of cuboidal nanoparticles with a single parameter. Applied to small-angle scattering data of sufficiently monodisperse nanoparticles, the superball form factor enables differentiation between the effects of extended particle size distribution and irregular particle shape. The quantitative application of the superball form factor is validated against microscopy data for a series of monodisperse nanoparticles and implemented into the user-friendly, open-source software Sasview.
|
|
2. |
- Feygenson, Mikhail, et al.
(author)
-
Probing spin waves in Co3O4 nanoparticles for magnonics applications
- 2024
-
In: Nanoscale. - : Royal Society of Chemistry. - 2040-3364 .- 2040-3372. ; 16:3, s. 1291-1303
-
Journal article (peer-reviewed)abstract
- The magnetic properties of spinel nanoparticles can be controlled by synthesizing particles of a specific shape and size. The synthesized nanorods, nanodots and cubic nanoparticles have different crystal planes selectively exposed on the surface. The surface effects on the static magnetic properties are well documented, while their influence on spin waves dispersion is still being debated. Our ability to manipulate spin waves using surface and defect engineering in magnetic nanoparticles is the key to designing magnonic devices. We synthesized cubic and spherical nanoparticles of a classical antiferromagnetic material Co3O4 to study the shape and size effects on their static and dynamic magnetic proprieties. Using a combination of experimental methods, we probed the magnetic and crystal structures of our samples and directly measured spin wave dispersions using inelastic neutron scattering. We found a weak, but unquestionable, increase in exchange interactions for the cubic nanoparticles as compared to spherical nanoparticle and bulk powder reference samples. Interestingly, the exchange interactions in spherical nanoparticles have bulk-like properties, despite a ferromagnetic contribution from canted surface spins.
|
|
3. |
- Liao, Xiaoqi, et al.
(author)
-
Low-field-induced spin-glass behavior and controllable anisotropy in nanoparticle assemblies at a liquid-air interface
- 2022
-
In: SCIENCE CHINA-MATERIALS. - : Springer Nature. - 2095-8226 .- 2199-4501. ; 65:1, s. 193-200
-
Journal article (peer-reviewed)abstract
- Stacking nanoscale-building blocks into one-dimensional (1D) assemblies with collective physical properties is a frontier in designing materials. However, the formation of 1D arrays using weak magnetic fields and an in-depth understanding of their magnetic properties remain challenging. Here, low-dimensional assemblies of iron oxide nanocubes with a disordered arrangement are fabricated at the diethylene-glycol/air interface in the presence of assembly fields (0/1/3/5/30/50 mT). Ring-shaped assemblies gradually transform as the assembly field increases from 0 to 50 mT, first to a porous network consisting of elongated assemblies and then to an aligned array of filaments, in which the aligned filaments are formed when the assembly field is >= 3 mT and duration t > 14 min. Spin-glass characteristics and static (dynamic) anisotropy factors similar to 2(3) are achieved by tuning the strength of the assembly field. In the presence of a relatively weak assembly field, the interplay between dipolar interactions and disorder with respect to magnetic easy axis alignment leads to spin-glass characteristics. The alignment of the magnetic easy axes and the strength of the dipolar interactions increase with increasing assembly field, resulting in the disappearance of spin-glass characteristics and enhancement of the magnetic anisotropy. This study presents a strategy for obtaining magnetic assemblies with spin-glass behavior and controllable anisotropy while shedding light on the magnetic interactions of low-dimensional assemblies.
|
|
4. |
- Menon, Ashok S., et al.
(author)
-
A Crystallographic Reinvestigation of Li1.2Mn0.6Ni0.2O2
-
Other publication (other academic/artistic)abstract
- Despite substantial research interest, the crystallography of the promising Li-ion positive electrode material, Li1.2Mn0.6Ni0.2O2, remains disputed. The dispute is predicated on the description of the cationic arrangement in the structure, and multiple structure models have been proposed. This study attempts to provide a fresh perspective to this debate through a multi-scalar structural characterisation of Li1.2Mn0.6Ni0.2O2. Combining Bragg diffraction, transmission electron microscopy and magnetic measurements with reverse Monte Carlo analysis of total scattering data, a quantitative structural description of Li1.2Mn0.6Ni0.2O2 is developed and the existing single- and multi-phase structural descriptions of this compound have been unified. Furthermore, the merits and drawbacks of each technique is evaluated with respect to the crystallography of Li1.2Mn0.6Ni0.2O2 to explain the factors that have contributed to the lack of clarity pervading the structural description of this material. It is envisioned that a better understanding of the crystallography of Li1.2Mn0.6Ni0.2O2 contributes to harnessing the electrochemical potential of this compound.
|
|
5. |
- Menon, Ashok S., et al.
(author)
-
Synthetic Pathway Determines the Nonequilibrium Crystallography of Li- and Mn-Rich Layered Oxide Cathode Materials
- 2021
-
In: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 4:2, s. 1924-1935
-
Journal article (peer-reviewed)abstract
- Li- and Mn-rich layered oxides show significant promise as electrode materials for future Li-ion batteries. However, an accurate description of its crystallography remains elusive, with both single-phase solid solution and multiphase structures being proposed for high performing materials such as Li1.2Mn0.54Ni0.13Co0.13O2. Herein, we report the synthesis of single- and multiphase variants of this material through sol-gel and solid-state methods, respectively, and demonstrate that its crystallography is a direct consequence of the synthetic route and not necessarily an inherent property of the composition, as previously argued. This was accomplished via complementary techniques that probe the bulk and local structure followed by in situ methods to map the synthetic progression. As the electrochemical performance and anionic redox behavior are often rationalized on the basis of the presumed crystal structure, clarifying the structural ambiguities is an important step toward harnessing its potential as an electrode material.
|
|
6. |
- Ulusoy, Seda, 1989-
(author)
-
Combining operando X-ray scattering and magnetometry to investigate conversion type electrode materials
- 2024
-
Doctoral thesis (other academic/artistic)abstract
- The transition towards a society with full electromobility depends heavily on the battery systems, which raises concerns about the environmental friendliness and sustainability of the current products on the market. Magnetite (Fe3O4) from the conversion type electrode family is one of the promising candidates in the search for a sustainable battery technology owing to its high theoretical storage capacity, high abundance, and low toxicity. However, the material suffers severely from capacity degradation in its practical use and hence requires better understanding and adjustments to reach its full potential.Developing nanostructured electrode materials is one of the strategies to enhance its storage capacity, stability, and charging rate. Therefore, this thesis starts with synthesis and chemical lithiation of cubic (ferrimagnetic) Fe3O4 nanoparticles that are used as a model system to establish relationships between structural and magnetic properties upon lithiation. The thesis then explores the relationship between particle size, composition, crystal structure, and electrochemical performance of Fe3O4 electrodes via multi-operando techniques during cycles of lithiation and delithiation reactions. Magnetometry, known for its sensitivity to the chemical, compositional, and agglomeration state of the materials was exploited to measure the magnetic signal of the electrodes under operando conditions as a complement to operando SAXS and WAXS measurements. The results from the operando studies indicated that during electrochemi calcycling; LiFeO2, FeO and metallic iron (Fe) are produced as intermediate compounds, but their stability regions differ greatly when using nanoparticles or bulk materials and also when compared against ex-situ analyzed specimens. In addition, commercial micron- and nanosized (paramagnetic) Co3O4 particles were employed to study evolution of structural and magnetic properties over cycles to shed light on the size-dependent reaction kinetics. The obtained results revealed that nanosizing leads to improved electrochemical performance, variations in surface reaction kinetics, and differences in aging mechanisms. The magnetic measurements were crucial in determining surface capacitance reactions that involve gel-like polymeric layer growth and degradation during Li removal and uptake.Lastly, the magnetic properties of layered NMC-based cathode materials were studied. The differences in their magnetic properties provided important information on the transition metal ordering depending on the choice of synthesis method that is used. Magnetization measurements were used in combination with diffraction data to choose an appropriate structure model to describe actual atomic arrangement in each material. Consequently, the findings in this thesis suggest that (operando) magnetometry can be employed as a complementary tool to elucidate structural details of battery electrodes, potentially revealing insights beyond the detection limits of volume-averaged X-ray scattering techniques.
|
|
7. |
- Ulusoy, Seda, et al.
(author)
-
Elucidating the Lithiation Process in Fe3−δO4 Nanoparticles by Correlating Magnetic and Structural Properties
- 2024
-
In: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 16:12, s. 14799-14808
-
Journal article (peer-reviewed)abstract
- Due to their high potential energy storage, magnetite (Fe3O4) nanoparticles have become appealing as anode materials in lithium-ion batteries. However, the details of the lithiation process are still not completely understood. Here, we investigate chemical lithiation in 70 nm cubic-shaped magnetite nanoparticles with varying degrees of lithiation, x = 0, 0.5, 1, and 1.5. The induced changes in the structural and magnetic properties were investigated using X-ray techniques along with electron microscopy and magnetic measurements. The results indicate that a structural transformation from spinel to rock salt phase occurs above a critical limit for the lithium concentration (xc), which is determined to be between 0.5< xc ≤ 1 for Fe3−δO4. Diffraction and magnetization measurements clearly show the formation of the antiferromagnetic LiFeO2 phase. Upon lithiation, magnetization measurements reveal an exchange bias in the hysteresis loops with an asymmetry, which can be attributed to the formation of mosaic-like LiFeO2 subdomains. The combined characterization techniques enabled us to unambiguously identify the phases and their distributions involved in the lithiation process. Correlating magnetic and structural properties opens the path to increasing the understanding of the processes involved in a variety of nonmagnetic applications of magnetic materials.
|
|
8. |
|
|
9. |
|
|